blob: 869ffc4d4484777310d2bf905c3d7346cef04c4c [file] [log] [blame]
/*
* arch/arm64/kernel/topology.c
*
* Copyright (C) 2011,2013,2014 Linaro Limited.
*
* Based on the arm32 version written by Vincent Guittot in turn based on
* arch/sh/kernel/topology.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/acpi.h>
#include <linux/arch_topology.h>
#include <linux/cacheinfo.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/topology.h>
void store_cpu_topology(unsigned int cpuid)
{
struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
u64 mpidr;
if (cpuid_topo->package_id != -1)
goto topology_populated;
mpidr = read_cpuid_mpidr();
/* Uniprocessor systems can rely on default topology values */
if (mpidr & MPIDR_UP_BITMASK)
return;
/*
* This would be the place to create cpu topology based on MPIDR.
*
* However, it cannot be trusted to depict the actual topology; some
* pieces of the architecture enforce an artificial cap on Aff0 values
* (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an
* artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up
* having absolutely no relationship to the actual underlying system
* topology, and cannot be reasonably used as core / package ID.
*
* If the MT bit is set, Aff0 *could* be used to define a thread ID, but
* we still wouldn't be able to obtain a sane core ID. This means we
* need to entirely ignore MPIDR for any topology deduction.
*/
cpuid_topo->thread_id = -1;
cpuid_topo->core_id = cpuid;
cpuid_topo->package_id = cpu_to_node(cpuid);
pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
cpuid_topo->thread_id, mpidr);
topology_populated:
update_siblings_masks(cpuid);
}
#ifdef CONFIG_ACPI
static bool __init acpi_cpu_is_threaded(int cpu)
{
int is_threaded = acpi_pptt_cpu_is_thread(cpu);
/*
* if the PPTT doesn't have thread information, assume a homogeneous
* machine and return the current CPU's thread state.
*/
if (is_threaded < 0)
is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
return !!is_threaded;
}
/*
* Propagate the topology information of the processor_topology_node tree to the
* cpu_topology array.
*/
int __init parse_acpi_topology(void)
{
int cpu, topology_id;
if (acpi_disabled)
return 0;
for_each_possible_cpu(cpu) {
topology_id = find_acpi_cpu_topology(cpu, 0);
if (topology_id < 0)
return topology_id;
if (acpi_cpu_is_threaded(cpu)) {
cpu_topology[cpu].thread_id = topology_id;
topology_id = find_acpi_cpu_topology(cpu, 1);
cpu_topology[cpu].core_id = topology_id;
} else {
cpu_topology[cpu].thread_id = -1;
cpu_topology[cpu].core_id = topology_id;
}
topology_id = find_acpi_cpu_topology_cluster(cpu);
cpu_topology[cpu].cluster_id = topology_id;
topology_id = find_acpi_cpu_topology_package(cpu);
cpu_topology[cpu].package_id = topology_id;
}
return 0;
}
#endif
#ifdef CONFIG_ARM64_AMU_EXTN
#define read_corecnt() read_sysreg_s(SYS_AMEVCNTR0_CORE_EL0)
#define read_constcnt() read_sysreg_s(SYS_AMEVCNTR0_CONST_EL0)
#else
#define read_corecnt() (0UL)
#define read_constcnt() (0UL)
#endif
#undef pr_fmt
#define pr_fmt(fmt) "AMU: " fmt
static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale);
static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
static cpumask_var_t amu_fie_cpus;
void update_freq_counters_refs(void)
{
this_cpu_write(arch_core_cycles_prev, read_corecnt());
this_cpu_write(arch_const_cycles_prev, read_constcnt());
}
static inline bool freq_counters_valid(int cpu)
{
if ((cpu >= nr_cpu_ids) || !cpumask_test_cpu(cpu, cpu_present_mask))
return false;
if (!cpu_has_amu_feat(cpu)) {
pr_debug("CPU%d: counters are not supported.\n", cpu);
return false;
}
if (unlikely(!per_cpu(arch_const_cycles_prev, cpu) ||
!per_cpu(arch_core_cycles_prev, cpu))) {
pr_debug("CPU%d: cycle counters are not enabled.\n", cpu);
return false;
}
return true;
}
static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
{
u64 ratio;
if (unlikely(!max_rate || !ref_rate)) {
pr_debug("CPU%d: invalid maximum or reference frequency.\n",
cpu);
return -EINVAL;
}
/*
* Pre-compute the fixed ratio between the frequency of the constant
* reference counter and the maximum frequency of the CPU.
*
* ref_rate
* arch_max_freq_scale = ---------- * SCHED_CAPACITY_SCALEĀ²
* max_rate
*
* We use a factor of 2 * SCHED_CAPACITY_SHIFT -> SCHED_CAPACITY_SCALEĀ²
* in order to ensure a good resolution for arch_max_freq_scale for
* very low reference frequencies (down to the KHz range which should
* be unlikely).
*/
ratio = ref_rate << (2 * SCHED_CAPACITY_SHIFT);
ratio = div64_u64(ratio, max_rate);
if (!ratio) {
WARN_ONCE(1, "Reference frequency too low.\n");
return -EINVAL;
}
per_cpu(arch_max_freq_scale, cpu) = (unsigned long)ratio;
return 0;
}
static void amu_scale_freq_tick(void)
{
u64 prev_core_cnt, prev_const_cnt;
u64 core_cnt, const_cnt, scale;
prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
update_freq_counters_refs();
const_cnt = this_cpu_read(arch_const_cycles_prev);
core_cnt = this_cpu_read(arch_core_cycles_prev);
if (unlikely(core_cnt <= prev_core_cnt ||
const_cnt <= prev_const_cnt))
return;
/*
* /\core arch_max_freq_scale
* scale = ------- * --------------------
* /\const SCHED_CAPACITY_SCALE
*
* See validate_cpu_freq_invariance_counters() for details on
* arch_max_freq_scale and the use of SCHED_CAPACITY_SHIFT.
*/
scale = core_cnt - prev_core_cnt;
scale *= this_cpu_read(arch_max_freq_scale);
scale = div64_u64(scale >> SCHED_CAPACITY_SHIFT,
const_cnt - prev_const_cnt);
scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
this_cpu_write(arch_freq_scale, (unsigned long)scale);
}
static struct scale_freq_data amu_sfd = {
.source = SCALE_FREQ_SOURCE_ARCH,
.set_freq_scale = amu_scale_freq_tick,
};
static void amu_fie_setup(const struct cpumask *cpus)
{
int cpu;
/* We are already set since the last insmod of cpufreq driver */
if (unlikely(cpumask_subset(cpus, amu_fie_cpus)))
return;
for_each_cpu(cpu, cpus) {
if (!freq_counters_valid(cpu) ||
freq_inv_set_max_ratio(cpu,
cpufreq_get_hw_max_freq(cpu) * 1000,
arch_timer_get_rate()))
return;
}
cpumask_or(amu_fie_cpus, amu_fie_cpus, cpus);
topology_set_scale_freq_source(&amu_sfd, amu_fie_cpus);
pr_debug("CPUs[%*pbl]: counters will be used for FIE.",
cpumask_pr_args(cpus));
}
static int init_amu_fie_callback(struct notifier_block *nb, unsigned long val,
void *data)
{
struct cpufreq_policy *policy = data;
if (val == CPUFREQ_CREATE_POLICY)
amu_fie_setup(policy->related_cpus);
/*
* We don't need to handle CPUFREQ_REMOVE_POLICY event as the AMU
* counters don't have any dependency on cpufreq driver once we have
* initialized AMU support and enabled invariance. The AMU counters will
* keep on working just fine in the absence of the cpufreq driver, and
* for the CPUs for which there are no counters available, the last set
* value of arch_freq_scale will remain valid as that is the frequency
* those CPUs are running at.
*/
return 0;
}
static struct notifier_block init_amu_fie_notifier = {
.notifier_call = init_amu_fie_callback,
};
static int __init init_amu_fie(void)
{
int ret;
if (!zalloc_cpumask_var(&amu_fie_cpus, GFP_KERNEL))
return -ENOMEM;
ret = cpufreq_register_notifier(&init_amu_fie_notifier,
CPUFREQ_POLICY_NOTIFIER);
if (ret)
free_cpumask_var(amu_fie_cpus);
return ret;
}
core_initcall(init_amu_fie);
#ifdef CONFIG_ACPI_CPPC_LIB
#include <acpi/cppc_acpi.h>
static void cpu_read_corecnt(void *val)
{
*(u64 *)val = read_corecnt();
}
static void cpu_read_constcnt(void *val)
{
*(u64 *)val = read_constcnt();
}
static inline
int counters_read_on_cpu(int cpu, smp_call_func_t func, u64 *val)
{
/*
* Abort call on counterless CPU or when interrupts are
* disabled - can lead to deadlock in smp sync call.
*/
if (!cpu_has_amu_feat(cpu))
return -EOPNOTSUPP;
if (WARN_ON_ONCE(irqs_disabled()))
return -EPERM;
smp_call_function_single(cpu, func, val, 1);
return 0;
}
/*
* Refer to drivers/acpi/cppc_acpi.c for the description of the functions
* below.
*/
bool cpc_ffh_supported(void)
{
return freq_counters_valid(get_cpu_with_amu_feat());
}
int cpc_read_ffh(int cpu, struct cpc_reg *reg, u64 *val)
{
int ret = -EOPNOTSUPP;
switch ((u64)reg->address) {
case 0x0:
ret = counters_read_on_cpu(cpu, cpu_read_corecnt, val);
break;
case 0x1:
ret = counters_read_on_cpu(cpu, cpu_read_constcnt, val);
break;
}
if (!ret) {
*val &= GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
reg->bit_offset);
*val >>= reg->bit_offset;
}
return ret;
}
int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
{
return -EOPNOTSUPP;
}
#endif /* CONFIG_ACPI_CPPC_LIB */