| /* |
| * Copyright © 2008-2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_link_training.h" |
| |
| static void |
| intel_dp_dump_link_status(const u8 link_status[DP_LINK_STATUS_SIZE]) |
| { |
| |
| DRM_DEBUG_KMS("ln0_1:0x%x ln2_3:0x%x align:0x%x sink:0x%x adj_req0_1:0x%x adj_req2_3:0x%x", |
| link_status[0], link_status[1], link_status[2], |
| link_status[3], link_status[4], link_status[5]); |
| } |
| |
| static int intel_dp_lttpr_count(struct intel_dp *intel_dp) |
| { |
| int count = drm_dp_lttpr_count(intel_dp->lttpr_common_caps); |
| |
| /* |
| * Pretend no LTTPRs in case of LTTPR detection error, or |
| * if too many (>8) LTTPRs are detected. This translates to link |
| * training in transparent mode. |
| */ |
| return count <= 0 ? 0 : count; |
| } |
| |
| static void intel_dp_reset_lttpr_count(struct intel_dp *intel_dp) |
| { |
| intel_dp->lttpr_common_caps[DP_PHY_REPEATER_CNT - |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] = 0; |
| } |
| |
| static const char *intel_dp_phy_name(enum drm_dp_phy dp_phy, |
| char *buf, size_t buf_size) |
| { |
| if (dp_phy == DP_PHY_DPRX) |
| snprintf(buf, buf_size, "DPRX"); |
| else |
| snprintf(buf, buf_size, "LTTPR %d", dp_phy - DP_PHY_LTTPR1 + 1); |
| |
| return buf; |
| } |
| |
| static u8 *intel_dp_lttpr_phy_caps(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| return intel_dp->lttpr_phy_caps[dp_phy - DP_PHY_LTTPR1]; |
| } |
| |
| static void intel_dp_read_lttpr_phy_caps(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| char phy_name[10]; |
| |
| intel_dp_phy_name(dp_phy, phy_name, sizeof(phy_name)); |
| |
| if (drm_dp_read_lttpr_phy_caps(&intel_dp->aux, dp_phy, phy_caps) < 0) { |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "failed to read the PHY caps for %s\n", |
| phy_name); |
| return; |
| } |
| |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "%s PHY capabilities: %*ph\n", |
| phy_name, |
| (int)sizeof(intel_dp->lttpr_phy_caps[0]), |
| phy_caps); |
| } |
| |
| static bool intel_dp_read_lttpr_common_caps(struct intel_dp *intel_dp) |
| { |
| if (drm_dp_read_lttpr_common_caps(&intel_dp->aux, |
| intel_dp->lttpr_common_caps) < 0) { |
| memset(intel_dp->lttpr_common_caps, 0, |
| sizeof(intel_dp->lttpr_common_caps)); |
| return false; |
| } |
| |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "LTTPR common capabilities: %*ph\n", |
| (int)sizeof(intel_dp->lttpr_common_caps), |
| intel_dp->lttpr_common_caps); |
| |
| return true; |
| } |
| |
| static bool |
| intel_dp_set_lttpr_transparent_mode(struct intel_dp *intel_dp, bool enable) |
| { |
| u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT : |
| DP_PHY_REPEATER_MODE_NON_TRANSPARENT; |
| |
| return drm_dp_dpcd_write(&intel_dp->aux, DP_PHY_REPEATER_MODE, &val, 1) == 1; |
| } |
| |
| /** |
| * intel_dp_lttpr_init - detect LTTPRs and init the LTTPR link training mode |
| * @intel_dp: Intel DP struct |
| * |
| * Read the LTTPR common capabilities, switch to non-transparent link training |
| * mode if any is detected and read the PHY capabilities for all detected |
| * LTTPRs. In case of an LTTPR detection error or if the number of |
| * LTTPRs is more than is supported (8), fall back to the no-LTTPR, |
| * transparent mode link training mode. |
| * |
| * Returns: |
| * >0 if LTTPRs were detected and the non-transparent LT mode was set |
| * 0 if no LTTPRs or more than 8 LTTPRs were detected or in case of a |
| * detection failure and the transparent LT mode was set |
| */ |
| int intel_dp_lttpr_init(struct intel_dp *intel_dp) |
| { |
| int lttpr_count; |
| bool ret; |
| int i; |
| |
| if (intel_dp_is_edp(intel_dp)) |
| return 0; |
| |
| ret = intel_dp_read_lttpr_common_caps(intel_dp); |
| |
| /* |
| * See DP Standard v2.0 3.6.6.1. about the explicit disabling of |
| * non-transparent mode and the disable->enable non-transparent mode |
| * sequence. |
| */ |
| intel_dp_set_lttpr_transparent_mode(intel_dp, true); |
| |
| if (!ret) |
| return 0; |
| |
| lttpr_count = intel_dp_lttpr_count(intel_dp); |
| |
| /* |
| * In case of unsupported number of LTTPRs or failing to switch to |
| * non-transparent mode fall-back to transparent link training mode, |
| * still taking into account any LTTPR common lane- rate/count limits. |
| */ |
| if (lttpr_count == 0) |
| return 0; |
| |
| if (!intel_dp_set_lttpr_transparent_mode(intel_dp, false)) { |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "Switching to LTTPR non-transparent LT mode failed, fall-back to transparent mode\n"); |
| |
| intel_dp_set_lttpr_transparent_mode(intel_dp, true); |
| intel_dp_reset_lttpr_count(intel_dp); |
| |
| return 0; |
| } |
| |
| for (i = 0; i < lttpr_count; i++) |
| intel_dp_read_lttpr_phy_caps(intel_dp, DP_PHY_LTTPR(i)); |
| |
| return lttpr_count; |
| } |
| EXPORT_SYMBOL(intel_dp_lttpr_init); |
| |
| static u8 dp_voltage_max(u8 preemph) |
| { |
| switch (preemph & DP_TRAIN_PRE_EMPHASIS_MASK) { |
| case DP_TRAIN_PRE_EMPH_LEVEL_0: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
| case DP_TRAIN_PRE_EMPH_LEVEL_1: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
| case DP_TRAIN_PRE_EMPH_LEVEL_2: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_1; |
| case DP_TRAIN_PRE_EMPH_LEVEL_3: |
| default: |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_0; |
| } |
| } |
| |
| static u8 intel_dp_lttpr_voltage_max(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| |
| if (drm_dp_lttpr_voltage_swing_level_3_supported(phy_caps)) |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_3; |
| else |
| return DP_TRAIN_VOLTAGE_SWING_LEVEL_2; |
| } |
| |
| static u8 intel_dp_lttpr_preemph_max(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| |
| if (drm_dp_lttpr_pre_emphasis_level_3_supported(phy_caps)) |
| return DP_TRAIN_PRE_EMPH_LEVEL_3; |
| else |
| return DP_TRAIN_PRE_EMPH_LEVEL_2; |
| } |
| |
| static bool |
| intel_dp_phy_is_downstream_of_source(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int lttpr_count = intel_dp_lttpr_count(intel_dp); |
| |
| drm_WARN_ON_ONCE(&i915->drm, lttpr_count == 0 && dp_phy != DP_PHY_DPRX); |
| |
| return lttpr_count == 0 || dp_phy == DP_PHY_LTTPR(lttpr_count - 1); |
| } |
| |
| static u8 intel_dp_phy_voltage_max(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 voltage_max; |
| |
| /* |
| * Get voltage_max from the DPTX_PHY (source or LTTPR) upstream from |
| * the DPRX_PHY we train. |
| */ |
| if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy)) |
| voltage_max = intel_dp->voltage_max(intel_dp, crtc_state); |
| else |
| voltage_max = intel_dp_lttpr_voltage_max(intel_dp, dp_phy + 1); |
| |
| drm_WARN_ON_ONCE(&i915->drm, |
| voltage_max != DP_TRAIN_VOLTAGE_SWING_LEVEL_2 && |
| voltage_max != DP_TRAIN_VOLTAGE_SWING_LEVEL_3); |
| |
| return voltage_max; |
| } |
| |
| static u8 intel_dp_phy_preemph_max(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 preemph_max; |
| |
| /* |
| * Get preemph_max from the DPTX_PHY (source or LTTPR) upstream from |
| * the DPRX_PHY we train. |
| */ |
| if (intel_dp_phy_is_downstream_of_source(intel_dp, dp_phy)) |
| preemph_max = intel_dp->preemph_max(intel_dp); |
| else |
| preemph_max = intel_dp_lttpr_preemph_max(intel_dp, dp_phy + 1); |
| |
| drm_WARN_ON_ONCE(&i915->drm, |
| preemph_max != DP_TRAIN_PRE_EMPH_LEVEL_2 && |
| preemph_max != DP_TRAIN_PRE_EMPH_LEVEL_3); |
| |
| return preemph_max; |
| } |
| |
| void |
| intel_dp_get_adjust_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| const u8 link_status[DP_LINK_STATUS_SIZE]) |
| { |
| u8 v = 0; |
| u8 p = 0; |
| int lane; |
| u8 voltage_max; |
| u8 preemph_max; |
| |
| for (lane = 0; lane < crtc_state->lane_count; lane++) { |
| v = max(v, drm_dp_get_adjust_request_voltage(link_status, lane)); |
| p = max(p, drm_dp_get_adjust_request_pre_emphasis(link_status, lane)); |
| } |
| |
| preemph_max = intel_dp_phy_preemph_max(intel_dp, dp_phy); |
| if (p >= preemph_max) |
| p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; |
| |
| v = min(v, dp_voltage_max(p)); |
| |
| voltage_max = intel_dp_phy_voltage_max(intel_dp, crtc_state, dp_phy); |
| if (v >= voltage_max) |
| v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; |
| |
| for (lane = 0; lane < 4; lane++) |
| intel_dp->train_set[lane] = v | p; |
| } |
| |
| static int intel_dp_training_pattern_set_reg(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| return dp_phy == DP_PHY_DPRX ? |
| DP_TRAINING_PATTERN_SET : |
| DP_TRAINING_PATTERN_SET_PHY_REPEATER(dp_phy); |
| } |
| |
| static bool |
| intel_dp_set_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| u8 dp_train_pat) |
| { |
| int reg = intel_dp_training_pattern_set_reg(intel_dp, dp_phy); |
| u8 buf[sizeof(intel_dp->train_set) + 1]; |
| int len; |
| |
| intel_dp_program_link_training_pattern(intel_dp, crtc_state, |
| dp_train_pat); |
| |
| buf[0] = dp_train_pat; |
| /* DP_TRAINING_LANEx_SET follow DP_TRAINING_PATTERN_SET */ |
| memcpy(buf + 1, intel_dp->train_set, crtc_state->lane_count); |
| len = crtc_state->lane_count + 1; |
| |
| return drm_dp_dpcd_write(&intel_dp->aux, reg, buf, len) == len; |
| } |
| |
| static bool |
| intel_dp_reset_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy, |
| u8 dp_train_pat) |
| { |
| memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); |
| intel_dp_set_signal_levels(intel_dp, crtc_state); |
| return intel_dp_set_link_train(intel_dp, crtc_state, dp_phy, dp_train_pat); |
| } |
| |
| static bool |
| intel_dp_update_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| int reg = dp_phy == DP_PHY_DPRX ? |
| DP_TRAINING_LANE0_SET : |
| DP_TRAINING_LANE0_SET_PHY_REPEATER(dp_phy); |
| int ret; |
| |
| intel_dp_set_signal_levels(intel_dp, crtc_state); |
| |
| ret = drm_dp_dpcd_write(&intel_dp->aux, reg, |
| intel_dp->train_set, crtc_state->lane_count); |
| |
| return ret == crtc_state->lane_count; |
| } |
| |
| static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| int lane; |
| |
| for (lane = 0; lane < crtc_state->lane_count; lane++) |
| if ((intel_dp->train_set[lane] & |
| DP_TRAIN_MAX_SWING_REACHED) == 0) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * Prepare link training by configuring the link parameters. On DDI platforms |
| * also enable the port here. |
| */ |
| static bool |
| intel_dp_prepare_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 link_config[2]; |
| u8 link_bw, rate_select; |
| |
| if (intel_dp->prepare_link_retrain) |
| intel_dp->prepare_link_retrain(intel_dp, crtc_state); |
| |
| intel_dp_compute_rate(intel_dp, crtc_state->port_clock, |
| &link_bw, &rate_select); |
| |
| if (link_bw) |
| drm_dbg_kms(&i915->drm, |
| "Using LINK_BW_SET value %02x\n", link_bw); |
| else |
| drm_dbg_kms(&i915->drm, |
| "Using LINK_RATE_SET value %02x\n", rate_select); |
| |
| /* Write the link configuration data */ |
| link_config[0] = link_bw; |
| link_config[1] = crtc_state->lane_count; |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; |
| drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2); |
| |
| /* eDP 1.4 rate select method. */ |
| if (!link_bw) |
| drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET, |
| &rate_select, 1); |
| |
| link_config[0] = 0; |
| link_config[1] = DP_SET_ANSI_8B10B; |
| drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2); |
| |
| intel_dp->DP |= DP_PORT_EN; |
| |
| return true; |
| } |
| |
| static void intel_dp_link_training_clock_recovery_delay(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| if (dp_phy == DP_PHY_DPRX) |
| drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd); |
| else |
| drm_dp_lttpr_link_train_clock_recovery_delay(); |
| } |
| |
| /* |
| * Perform the link training clock recovery phase on the given DP PHY using |
| * training pattern 1. |
| */ |
| static bool |
| intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 voltage; |
| int voltage_tries, cr_tries, max_cr_tries; |
| bool max_vswing_reached = false; |
| |
| /* clock recovery */ |
| if (!intel_dp_reset_link_train(intel_dp, crtc_state, dp_phy, |
| DP_TRAINING_PATTERN_1 | |
| DP_LINK_SCRAMBLING_DISABLE)) { |
| drm_err(&i915->drm, "failed to enable link training\n"); |
| return false; |
| } |
| |
| /* |
| * The DP 1.4 spec defines the max clock recovery retries value |
| * as 10 but for pre-DP 1.4 devices we set a very tolerant |
| * retry limit of 80 (4 voltage levels x 4 preemphasis levels x |
| * x 5 identical voltage retries). Since the previous specs didn't |
| * define a limit and created the possibility of an infinite loop |
| * we want to prevent any sync from triggering that corner case. |
| */ |
| if (intel_dp->dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14) |
| max_cr_tries = 10; |
| else |
| max_cr_tries = 80; |
| |
| voltage_tries = 1; |
| for (cr_tries = 0; cr_tries < max_cr_tries; ++cr_tries) { |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| |
| intel_dp_link_training_clock_recovery_delay(intel_dp, dp_phy); |
| |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy, |
| link_status) < 0) { |
| drm_err(&i915->drm, "failed to get link status\n"); |
| return false; |
| } |
| |
| if (drm_dp_clock_recovery_ok(link_status, crtc_state->lane_count)) { |
| drm_dbg_kms(&i915->drm, "clock recovery OK\n"); |
| return true; |
| } |
| |
| if (voltage_tries == 5) { |
| drm_dbg_kms(&i915->drm, |
| "Same voltage tried 5 times\n"); |
| return false; |
| } |
| |
| if (max_vswing_reached) { |
| drm_dbg_kms(&i915->drm, "Max Voltage Swing reached\n"); |
| return false; |
| } |
| |
| voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; |
| |
| /* Update training set as requested by target */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy, |
| link_status); |
| if (!intel_dp_update_link_train(intel_dp, crtc_state, dp_phy)) { |
| drm_err(&i915->drm, |
| "failed to update link training\n"); |
| return false; |
| } |
| |
| if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == |
| voltage) |
| ++voltage_tries; |
| else |
| voltage_tries = 1; |
| |
| if (intel_dp_link_max_vswing_reached(intel_dp, crtc_state)) |
| max_vswing_reached = true; |
| |
| } |
| drm_err(&i915->drm, |
| "Failed clock recovery %d times, giving up!\n", max_cr_tries); |
| return false; |
| } |
| |
| /* |
| * Pick training pattern for channel equalization. Training pattern 4 for HBR3 |
| * or for 1.4 devices that support it, training Pattern 3 for HBR2 |
| * or 1.2 devices that support it, Training Pattern 2 otherwise. |
| */ |
| static u32 intel_dp_training_pattern(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| bool source_tps3, sink_tps3, source_tps4, sink_tps4; |
| |
| /* |
| * Intel platforms that support HBR3 also support TPS4. It is mandatory |
| * for all downstream devices that support HBR3. There are no known eDP |
| * panels that support TPS4 as of Feb 2018 as per VESA eDP_v1.4b_E1 |
| * specification. |
| * LTTPRs must support TPS4. |
| */ |
| source_tps4 = intel_dp_source_supports_hbr3(intel_dp); |
| sink_tps4 = dp_phy != DP_PHY_DPRX || |
| drm_dp_tps4_supported(intel_dp->dpcd); |
| if (source_tps4 && sink_tps4) { |
| return DP_TRAINING_PATTERN_4; |
| } else if (crtc_state->port_clock == 810000) { |
| if (!source_tps4) |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "8.1 Gbps link rate without source HBR3/TPS4 support\n"); |
| if (!sink_tps4) |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "8.1 Gbps link rate without sink TPS4 support\n"); |
| } |
| /* |
| * Intel platforms that support HBR2 also support TPS3. TPS3 support is |
| * also mandatory for downstream devices that support HBR2. However, not |
| * all sinks follow the spec. |
| */ |
| source_tps3 = intel_dp_source_supports_hbr2(intel_dp); |
| sink_tps3 = dp_phy != DP_PHY_DPRX || |
| drm_dp_tps3_supported(intel_dp->dpcd); |
| if (source_tps3 && sink_tps3) { |
| return DP_TRAINING_PATTERN_3; |
| } else if (crtc_state->port_clock >= 540000) { |
| if (!source_tps3) |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| ">=5.4/6.48 Gbps link rate without source HBR2/TPS3 support\n"); |
| if (!sink_tps3) |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| ">=5.4/6.48 Gbps link rate without sink TPS3 support\n"); |
| } |
| |
| return DP_TRAINING_PATTERN_2; |
| } |
| |
| static void |
| intel_dp_link_training_channel_equalization_delay(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| if (dp_phy == DP_PHY_DPRX) { |
| drm_dp_link_train_channel_eq_delay(intel_dp->dpcd); |
| } else { |
| const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy); |
| |
| drm_dp_lttpr_link_train_channel_eq_delay(phy_caps); |
| } |
| } |
| |
| /* |
| * Perform the link training channel equalization phase on the given DP PHY |
| * using one of training pattern 2, 3 or 4 depending on the source and |
| * sink capabilities. |
| */ |
| static bool |
| intel_dp_link_training_channel_equalization(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int tries; |
| u32 training_pattern; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| bool channel_eq = false; |
| |
| training_pattern = intel_dp_training_pattern(intel_dp, crtc_state, dp_phy); |
| /* Scrambling is disabled for TPS2/3 and enabled for TPS4 */ |
| if (training_pattern != DP_TRAINING_PATTERN_4) |
| training_pattern |= DP_LINK_SCRAMBLING_DISABLE; |
| |
| /* channel equalization */ |
| if (!intel_dp_set_link_train(intel_dp, crtc_state, dp_phy, |
| training_pattern)) { |
| drm_err(&i915->drm, "failed to start channel equalization\n"); |
| return false; |
| } |
| |
| for (tries = 0; tries < 5; tries++) { |
| intel_dp_link_training_channel_equalization_delay(intel_dp, |
| dp_phy); |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, dp_phy, |
| link_status) < 0) { |
| drm_err(&i915->drm, |
| "failed to get link status\n"); |
| break; |
| } |
| |
| /* Make sure clock is still ok */ |
| if (!drm_dp_clock_recovery_ok(link_status, |
| crtc_state->lane_count)) { |
| intel_dp_dump_link_status(link_status); |
| drm_dbg_kms(&i915->drm, |
| "Clock recovery check failed, cannot " |
| "continue channel equalization\n"); |
| break; |
| } |
| |
| if (drm_dp_channel_eq_ok(link_status, |
| crtc_state->lane_count)) { |
| channel_eq = true; |
| drm_dbg_kms(&i915->drm, "Channel EQ done. DP Training " |
| "successful\n"); |
| break; |
| } |
| |
| /* Update training set as requested by target */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, dp_phy, |
| link_status); |
| if (!intel_dp_update_link_train(intel_dp, crtc_state, dp_phy)) { |
| drm_err(&i915->drm, |
| "failed to update link training\n"); |
| break; |
| } |
| } |
| |
| /* Try 5 times, else fail and try at lower BW */ |
| if (tries == 5) { |
| intel_dp_dump_link_status(link_status); |
| drm_dbg_kms(&i915->drm, |
| "Channel equalization failed 5 times\n"); |
| } |
| |
| return channel_eq; |
| } |
| |
| static bool intel_dp_disable_dpcd_training_pattern(struct intel_dp *intel_dp, |
| enum drm_dp_phy dp_phy) |
| { |
| int reg = intel_dp_training_pattern_set_reg(intel_dp, dp_phy); |
| u8 val = DP_TRAINING_PATTERN_DISABLE; |
| |
| return drm_dp_dpcd_write(&intel_dp->aux, reg, &val, 1) == 1; |
| } |
| |
| /** |
| * intel_dp_stop_link_train - stop link training |
| * @intel_dp: DP struct |
| * @crtc_state: state for CRTC attached to the encoder |
| * |
| * Stop the link training of the @intel_dp port, disabling the test pattern |
| * symbol generation on the port and disabling the training pattern in |
| * the sink's DPCD. |
| * |
| * What symbols are output on the port after this point is |
| * platform specific: On DDI/VLV/CHV platforms it will be the idle pattern |
| * with the pipe being disabled, on older platforms it's HW specific if/how an |
| * idle pattern is generated, as the pipe is already enabled here for those. |
| * |
| * This function must be called after intel_dp_start_link_train(). |
| */ |
| void intel_dp_stop_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| intel_dp->link_trained = true; |
| |
| intel_dp_program_link_training_pattern(intel_dp, |
| crtc_state, |
| DP_TRAINING_PATTERN_DISABLE); |
| intel_dp_disable_dpcd_training_pattern(intel_dp, DP_PHY_DPRX); |
| } |
| |
| static bool |
| intel_dp_link_train_phy(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| enum drm_dp_phy dp_phy) |
| { |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| char phy_name[10]; |
| bool ret = false; |
| |
| if (!intel_dp_link_training_clock_recovery(intel_dp, crtc_state, dp_phy)) |
| goto out; |
| |
| if (!intel_dp_link_training_channel_equalization(intel_dp, crtc_state, dp_phy)) |
| goto out; |
| |
| ret = true; |
| |
| out: |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "[CONNECTOR:%d:%s] Link Training %s at link rate = %d, lane count = %d, at %s", |
| intel_connector->base.base.id, |
| intel_connector->base.name, |
| ret ? "passed" : "failed", |
| crtc_state->port_clock, crtc_state->lane_count, |
| intel_dp_phy_name(dp_phy, phy_name, sizeof(phy_name))); |
| |
| return ret; |
| } |
| |
| static void intel_dp_schedule_fallback_link_training(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| |
| if (intel_dp->hobl_active) { |
| drm_dbg_kms(&dp_to_i915(intel_dp)->drm, |
| "Link Training failed with HOBL active, not enabling it from now on"); |
| intel_dp->hobl_failed = true; |
| } else if (intel_dp_get_link_train_fallback_values(intel_dp, |
| crtc_state->port_clock, |
| crtc_state->lane_count)) { |
| return; |
| } |
| |
| /* Schedule a Hotplug Uevent to userspace to start modeset */ |
| schedule_work(&intel_connector->modeset_retry_work); |
| } |
| |
| /* Perform the link training on all LTTPRs and the DPRX on a link. */ |
| static bool |
| intel_dp_link_train_all_phys(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int lttpr_count) |
| { |
| bool ret = true; |
| int i; |
| |
| intel_dp_prepare_link_train(intel_dp, crtc_state); |
| |
| for (i = lttpr_count - 1; i >= 0; i--) { |
| enum drm_dp_phy dp_phy = DP_PHY_LTTPR(i); |
| |
| ret = intel_dp_link_train_phy(intel_dp, crtc_state, dp_phy); |
| intel_dp_disable_dpcd_training_pattern(intel_dp, dp_phy); |
| |
| if (!ret) |
| break; |
| } |
| |
| if (ret) |
| intel_dp_link_train_phy(intel_dp, crtc_state, DP_PHY_DPRX); |
| |
| if (intel_dp->set_idle_link_train) |
| intel_dp->set_idle_link_train(intel_dp, crtc_state); |
| |
| return ret; |
| } |
| |
| /** |
| * intel_dp_start_link_train - start link training |
| * @intel_dp: DP struct |
| * @crtc_state: state for CRTC attached to the encoder |
| * |
| * Start the link training of the @intel_dp port, scheduling a fallback |
| * retraining with reduced link rate/lane parameters if the link training |
| * fails. |
| * After calling this function intel_dp_stop_link_train() must be called. |
| */ |
| void intel_dp_start_link_train(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| /* |
| * TODO: Reiniting LTTPRs here won't be needed once proper connector |
| * HW state readout is added. |
| */ |
| int lttpr_count = intel_dp_lttpr_init(intel_dp); |
| |
| if (!intel_dp_link_train_all_phys(intel_dp, crtc_state, lttpr_count)) |
| intel_dp_schedule_fallback_link_training(intel_dp, crtc_state); |
| } |