drivers/gpu/drm/v3d/v3d_irq.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /* Copyright (C) 2014-2018 Broadcom */

 /**
  * DOC: Interrupt management for the V3D engine
  *
  * When we take a bin, render, TFU done, or CSD done interrupt, we
  * need to signal the fence for that job so that the scheduler can
  * queue up the next one and unblock any waiters.
  *
  * When we take the binner out of memory interrupt, we need to
  * allocate some new memory and pass it to the binner so that the
  * current job can make progress.
  */

 #include <linux/platform_device.h>

 #include "v3d_drv.h"
 #include "v3d_regs.h"
 #include "v3d_trace.h"

 #define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM |	\
 			     V3D_INT_FLDONE |	\
 			     V3D_INT_FRDONE |	\
 			     V3D_INT_CSDDONE |	\
 			     V3D_INT_GMPV))

 #define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV |	\
 			    V3D_HUB_INT_MMU_PTI |	\
 			    V3D_HUB_INT_MMU_CAP |	\
 			    V3D_HUB_INT_TFUC))

 static irqreturn_t
 v3d_hub_irq(int irq, void *arg);

 static void
 v3d_overflow_mem_work(struct work_struct *work)
 {
 	struct v3d_dev *v3d =
 		container_of(work, struct v3d_dev, overflow_mem_work);
 	struct drm_device *dev = &v3d->drm;
 	struct v3d_bo *bo = v3d_bo_create(dev, NULL /* XXX: GMP */, 256 * 1024);
 	struct drm_gem_object *obj;
 	unsigned long irqflags;

 	if (IS_ERR(bo)) {
 		DRM_ERROR("Couldn't allocate binner overflow mem\n");
 		return;
 	}
 	obj = &bo->base.base;

 	/* We lost a race, and our work task came in after the bin job
 	 * completed and exited.  This can happen because the HW
 	 * signals OOM before it's fully OOM, so the binner might just
 	 * barely complete.
 	 *
 	 * If we lose the race and our work task comes in after a new
 	 * bin job got scheduled, that's fine.  We'll just give them
 	 * some binner pool anyway.
 	 */
 	spin_lock_irqsave(&v3d->job_lock, irqflags);
 	if (!v3d->bin_job) {
 		spin_unlock_irqrestore(&v3d->job_lock, irqflags);
 		goto out;
 	}

 	drm_gem_object_get(obj);
 	list_add_tail(&bo->unref_head, &v3d->bin_job->render->unref_list);
 	spin_unlock_irqrestore(&v3d->job_lock, irqflags);

 	V3D_CORE_WRITE(0, V3D_PTB_BPOA, bo->node.start << PAGE_SHIFT);
 	V3D_CORE_WRITE(0, V3D_PTB_BPOS, obj->size);

 out:
 	drm_gem_object_put(obj);
 }

 static irqreturn_t
 v3d_irq(int irq, void *arg)
 {
 	struct v3d_dev *v3d = arg;
 	u32 intsts;
 	irqreturn_t status = IRQ_NONE;

 	intsts = V3D_CORE_READ(0, V3D_CTL_INT_STS);

 	/* Acknowledge the interrupts we're handling here. */
 	V3D_CORE_WRITE(0, V3D_CTL_INT_CLR, intsts);

 	if (intsts & V3D_INT_OUTOMEM) {
 		/* Note that the OOM status is edge signaled, so the
 		 * interrupt won't happen again until the we actually
 		 * add more memory.  Also, as of V3D 4.1, FLDONE won't
 		 * be reported until any OOM state has been cleared.
 		 */
 		schedule_work(&v3d->overflow_mem_work);
 		status = IRQ_HANDLED;
 	}

 	if (intsts & V3D_INT_FLDONE) {
 		struct v3d_fence *fence =
 			to_v3d_fence(v3d->bin_job->base.irq_fence);

 		trace_v3d_bcl_irq(&v3d->drm, fence->seqno);
 		dma_fence_signal(&fence->base);
 		status = IRQ_HANDLED;
 	}

 	if (intsts & V3D_INT_FRDONE) {
 		struct v3d_fence *fence =
 			to_v3d_fence(v3d->render_job->base.irq_fence);

 		trace_v3d_rcl_irq(&v3d->drm, fence->seqno);
 		dma_fence_signal(&fence->base);
 		status = IRQ_HANDLED;
 	}

 	if (intsts & V3D_INT_CSDDONE) {
 		struct v3d_fence *fence =
 			to_v3d_fence(v3d->csd_job->base.irq_fence);

 		trace_v3d_csd_irq(&v3d->drm, fence->seqno);
 		dma_fence_signal(&fence->base);
 		status = IRQ_HANDLED;
 	}

 	/* We shouldn't be triggering these if we have GMP in
 	 * always-allowed mode.
 	 */
 	if (intsts & V3D_INT_GMPV)
 		dev_err(v3d->drm.dev, "GMP violation\n");

 	/* V3D 4.2 wires the hub and core IRQs together, so if we &
 	 * didn't see the common one then check hub for MMU IRQs.
 	 */
 	if (v3d->single_irq_line && status == IRQ_NONE)
 		return v3d_hub_irq(irq, arg);

 	return status;
 }

 static irqreturn_t
 v3d_hub_irq(int irq, void *arg)
 {
 	struct v3d_dev *v3d = arg;
 	u32 intsts;
 	irqreturn_t status = IRQ_NONE;

 	intsts = V3D_READ(V3D_HUB_INT_STS);

 	/* Acknowledge the interrupts we're handling here. */
 	V3D_WRITE(V3D_HUB_INT_CLR, intsts);

 	if (intsts & V3D_HUB_INT_TFUC) {
 		struct v3d_fence *fence =
 			to_v3d_fence(v3d->tfu_job->base.irq_fence);

 		trace_v3d_tfu_irq(&v3d->drm, fence->seqno);
 		dma_fence_signal(&fence->base);
 		status = IRQ_HANDLED;
 	}

 	if (intsts & (V3D_HUB_INT_MMU_WRV |
 		      V3D_HUB_INT_MMU_PTI |
 		      V3D_HUB_INT_MMU_CAP)) {
 		u32 axi_id = V3D_READ(V3D_MMU_VIO_ID);
 		u64 vio_addr = ((u64)V3D_READ(V3D_MMU_VIO_ADDR) <<
 				(v3d->va_width - 32));
 		static const char *const v3d41_axi_ids[] = {
 			"L2T",
 			"PTB",
 			"PSE",
 			"TLB",
 			"CLE",
 			"TFU",
 			"MMU",
 			"GMP",
 		};
 		const char *client = "?";

 		V3D_WRITE(V3D_MMU_CTL,
 			  V3D_READ(V3D_MMU_CTL) & (V3D_MMU_CTL_CAP_EXCEEDED |
 						   V3D_MMU_CTL_PT_INVALID |
 						   V3D_MMU_CTL_WRITE_VIOLATION));

 		if (v3d->ver >= 41) {
 			axi_id = axi_id >> 5;
 			if (axi_id < ARRAY_SIZE(v3d41_axi_ids))
 				client = v3d41_axi_ids[axi_id];
 		}

 		dev_err(v3d->drm.dev, "MMU error from client %s (%d) at 0x%llx%s%s%s\n",
 			client, axi_id, (long long)vio_addr,
 			((intsts & V3D_HUB_INT_MMU_WRV) ?
 			 ", write violation" : ""),
 			((intsts & V3D_HUB_INT_MMU_PTI) ?
 			 ", pte invalid" : ""),
 			((intsts & V3D_HUB_INT_MMU_CAP) ?
 			 ", cap exceeded" : ""));
 		status = IRQ_HANDLED;
 	}

 	return status;
 }

 int
 v3d_irq_init(struct v3d_dev *v3d)
 {
 	int irq1, ret, core;

 	INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work);

 	/* Clear any pending interrupts someone might have left around
 	 * for us.
 	 */
 	for (core = 0; core < v3d->cores; core++)
 		V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
 	V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);

 	irq1 = platform_get_irq(v3d_to_pdev(v3d), 1);
 	if (irq1 == -EPROBE_DEFER)
 		return irq1;
 	if (irq1 > 0) {
 		ret = devm_request_irq(v3d->drm.dev, irq1,
 				       v3d_irq, IRQF_SHARED,
 				       "v3d_core0", v3d);
 		if (ret)
 			goto fail;
 		ret = devm_request_irq(v3d->drm.dev,
 				       platform_get_irq(v3d_to_pdev(v3d), 0),
 				       v3d_hub_irq, IRQF_SHARED,
 				       "v3d_hub", v3d);
 		if (ret)
 			goto fail;
 	} else {
 		v3d->single_irq_line = true;

 		ret = devm_request_irq(v3d->drm.dev,
 				       platform_get_irq(v3d_to_pdev(v3d), 0),
 				       v3d_irq, IRQF_SHARED,
 				       "v3d", v3d);
 		if (ret)
 			goto fail;
 	}

 	v3d_irq_enable(v3d);
 	return 0;

 fail:
 	if (ret != -EPROBE_DEFER)
 		dev_err(v3d->drm.dev, "IRQ setup failed: %d\n", ret);
 	return ret;
 }

 void
 v3d_irq_enable(struct v3d_dev *v3d)
 {
 	int core;

 	/* Enable our set of interrupts, masking out any others. */
 	for (core = 0; core < v3d->cores; core++) {
 		V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~V3D_CORE_IRQS);
 		V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_CLR, V3D_CORE_IRQS);
 	}

 	V3D_WRITE(V3D_HUB_INT_MSK_SET, ~V3D_HUB_IRQS);
 	V3D_WRITE(V3D_HUB_INT_MSK_CLR, V3D_HUB_IRQS);
 }

 void
 v3d_irq_disable(struct v3d_dev *v3d)
 {
 	int core;

 	/* Disable all interrupts. */
 	for (core = 0; core < v3d->cores; core++)
 		V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~0);
 	V3D_WRITE(V3D_HUB_INT_MSK_SET, ~0);

 	/* Clear any pending interrupts we might have left. */
 	for (core = 0; core < v3d->cores; core++)
 		V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
 	V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);

 	cancel_work_sync(&v3d->overflow_mem_work);
 }

 /** Reinitializes interrupt registers when a GPU reset is performed. */
 void v3d_irq_reset(struct v3d_dev *v3d)
 {
 	v3d_irq_enable(v3d);
 }
	// SPDX-License-Identifier: GPL-2.0+
	/* Copyright (C) 2014-2018 Broadcom */

	/**
	* DOC: Interrupt management for the V3D engine
	*
	* When we take a bin, render, TFU done, or CSD done interrupt, we
	* need to signal the fence for that job so that the scheduler can
	* queue up the next one and unblock any waiters.
	*
	* When we take the binner out of memory interrupt, we need to
	* allocate some new memory and pass it to the binner so that the
	* current job can make progress.
	*/

	#include <linux/platform_device.h>

	#include "v3d_drv.h"
	#include "v3d_regs.h"
	#include "v3d_trace.h"

	#define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM \| \
	V3D_INT_FLDONE \| \
	V3D_INT_FRDONE \| \
	V3D_INT_CSDDONE \| \
	V3D_INT_GMPV))

	#define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV \| \
	V3D_HUB_INT_MMU_PTI \| \
	V3D_HUB_INT_MMU_CAP \| \
	V3D_HUB_INT_TFUC))

	static irqreturn_t
	v3d_hub_irq(int irq, void *arg);

	static void
	v3d_overflow_mem_work(struct work_struct *work)
	{
	struct v3d_dev *v3d =
	container_of(work, struct v3d_dev, overflow_mem_work);
	struct drm_device *dev = &v3d->drm;
	struct v3d_bo bo = v3d_bo_create(dev, NULL / XXX: GMP /, 256 1024);
	struct drm_gem_object *obj;
	unsigned long irqflags;

	if (IS_ERR(bo)) {
	DRM_ERROR("Couldn't allocate binner overflow mem\n");
	return;
	}
	obj = &bo->base.base;

	/* We lost a race, and our work task came in after the bin job
	* completed and exited. This can happen because the HW
	* signals OOM before it's fully OOM, so the binner might just
	* barely complete.
	*
	* If we lose the race and our work task comes in after a new
	* bin job got scheduled, that's fine. We'll just give them
	* some binner pool anyway.
	*/
	spin_lock_irqsave(&v3d->job_lock, irqflags);
	if (!v3d->bin_job) {
	spin_unlock_irqrestore(&v3d->job_lock, irqflags);
	goto out;
	}

	drm_gem_object_get(obj);
	list_add_tail(&bo->unref_head, &v3d->bin_job->render->unref_list);
	spin_unlock_irqrestore(&v3d->job_lock, irqflags);

	V3D_CORE_WRITE(0, V3D_PTB_BPOA, bo->node.start << PAGE_SHIFT);
	V3D_CORE_WRITE(0, V3D_PTB_BPOS, obj->size);

	out:
	drm_gem_object_put(obj);
	}

	static irqreturn_t
	v3d_irq(int irq, void *arg)
	{
	struct v3d_dev *v3d = arg;
	u32 intsts;
	irqreturn_t status = IRQ_NONE;

	intsts = V3D_CORE_READ(0, V3D_CTL_INT_STS);

	/* Acknowledge the interrupts we're handling here. */
	V3D_CORE_WRITE(0, V3D_CTL_INT_CLR, intsts);

	if (intsts & V3D_INT_OUTOMEM) {
	/* Note that the OOM status is edge signaled, so the
	* interrupt won't happen again until the we actually
	* add more memory. Also, as of V3D 4.1, FLDONE won't
	* be reported until any OOM state has been cleared.
	*/
	schedule_work(&v3d->overflow_mem_work);
	status = IRQ_HANDLED;
	}

	if (intsts & V3D_INT_FLDONE) {
	struct v3d_fence *fence =
	to_v3d_fence(v3d->bin_job->base.irq_fence);

	trace_v3d_bcl_irq(&v3d->drm, fence->seqno);
	dma_fence_signal(&fence->base);
	status = IRQ_HANDLED;
	}

	if (intsts & V3D_INT_FRDONE) {
	struct v3d_fence *fence =
	to_v3d_fence(v3d->render_job->base.irq_fence);

	trace_v3d_rcl_irq(&v3d->drm, fence->seqno);
	dma_fence_signal(&fence->base);
	status = IRQ_HANDLED;
	}

	if (intsts & V3D_INT_CSDDONE) {
	struct v3d_fence *fence =
	to_v3d_fence(v3d->csd_job->base.irq_fence);

	trace_v3d_csd_irq(&v3d->drm, fence->seqno);
	dma_fence_signal(&fence->base);
	status = IRQ_HANDLED;
	}

	/* We shouldn't be triggering these if we have GMP in
	* always-allowed mode.
	*/
	if (intsts & V3D_INT_GMPV)
	dev_err(v3d->drm.dev, "GMP violation\n");

	/* V3D 4.2 wires the hub and core IRQs together, so if we &
	* didn't see the common one then check hub for MMU IRQs.
	*/
	if (v3d->single_irq_line && status == IRQ_NONE)
	return v3d_hub_irq(irq, arg);

	return status;
	}

	static irqreturn_t
	v3d_hub_irq(int irq, void *arg)
	{
	struct v3d_dev *v3d = arg;
	u32 intsts;
	irqreturn_t status = IRQ_NONE;

	intsts = V3D_READ(V3D_HUB_INT_STS);

	/* Acknowledge the interrupts we're handling here. */
	V3D_WRITE(V3D_HUB_INT_CLR, intsts);

	if (intsts & V3D_HUB_INT_TFUC) {
	struct v3d_fence *fence =
	to_v3d_fence(v3d->tfu_job->base.irq_fence);

	trace_v3d_tfu_irq(&v3d->drm, fence->seqno);
	dma_fence_signal(&fence->base);
	status = IRQ_HANDLED;
	}

	if (intsts & (V3D_HUB_INT_MMU_WRV \|
	V3D_HUB_INT_MMU_PTI \|
	V3D_HUB_INT_MMU_CAP)) {
	u32 axi_id = V3D_READ(V3D_MMU_VIO_ID);
	u64 vio_addr = ((u64)V3D_READ(V3D_MMU_VIO_ADDR) <<
	(v3d->va_width - 32));
	static const char *const v3d41_axi_ids[] = {
	"L2T",
	"PTB",
	"PSE",
	"TLB",
	"CLE",
	"TFU",
	"MMU",
	"GMP",
	};
	const char *client = "?";

	V3D_WRITE(V3D_MMU_CTL,
	V3D_READ(V3D_MMU_CTL) & (V3D_MMU_CTL_CAP_EXCEEDED \|
	V3D_MMU_CTL_PT_INVALID \|
	V3D_MMU_CTL_WRITE_VIOLATION));

	if (v3d->ver >= 41) {
	axi_id = axi_id >> 5;
	if (axi_id < ARRAY_SIZE(v3d41_axi_ids))
	client = v3d41_axi_ids[axi_id];
	}

	dev_err(v3d->drm.dev, "MMU error from client %s (%d) at 0x%llx%s%s%s\n",
	client, axi_id, (long long)vio_addr,
	((intsts & V3D_HUB_INT_MMU_WRV) ?
	", write violation" : ""),
	((intsts & V3D_HUB_INT_MMU_PTI) ?
	", pte invalid" : ""),
	((intsts & V3D_HUB_INT_MMU_CAP) ?
	", cap exceeded" : ""));
	status = IRQ_HANDLED;
	}

	return status;
	}

	int
	v3d_irq_init(struct v3d_dev *v3d)
	{
	int irq1, ret, core;

	INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work);

	/* Clear any pending interrupts someone might have left around
	* for us.
	*/
	for (core = 0; core < v3d->cores; core++)
	V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
	V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);

	irq1 = platform_get_irq(v3d_to_pdev(v3d), 1);
	if (irq1 == -EPROBE_DEFER)
	return irq1;
	if (irq1 > 0) {
	ret = devm_request_irq(v3d->drm.dev, irq1,
	v3d_irq, IRQF_SHARED,
	"v3d_core0", v3d);
	if (ret)
	goto fail;
	ret = devm_request_irq(v3d->drm.dev,
	platform_get_irq(v3d_to_pdev(v3d), 0),
	v3d_hub_irq, IRQF_SHARED,
	"v3d_hub", v3d);
	if (ret)
	goto fail;
	} else {
	v3d->single_irq_line = true;

	ret = devm_request_irq(v3d->drm.dev,
	platform_get_irq(v3d_to_pdev(v3d), 0),
	v3d_irq, IRQF_SHARED,
	"v3d", v3d);
	if (ret)
	goto fail;
	}

	v3d_irq_enable(v3d);
	return 0;

	fail:
	if (ret != -EPROBE_DEFER)
	dev_err(v3d->drm.dev, "IRQ setup failed: %d\n", ret);
	return ret;
	}

	void
	v3d_irq_enable(struct v3d_dev *v3d)
	{
	int core;

	/* Enable our set of interrupts, masking out any others. */
	for (core = 0; core < v3d->cores; core++) {
	V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~V3D_CORE_IRQS);
	V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_CLR, V3D_CORE_IRQS);
	}

	V3D_WRITE(V3D_HUB_INT_MSK_SET, ~V3D_HUB_IRQS);
	V3D_WRITE(V3D_HUB_INT_MSK_CLR, V3D_HUB_IRQS);
	}

	void
	v3d_irq_disable(struct v3d_dev *v3d)
	{
	int core;

	/* Disable all interrupts. */
	for (core = 0; core < v3d->cores; core++)
	V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~0);
	V3D_WRITE(V3D_HUB_INT_MSK_SET, ~0);

	/* Clear any pending interrupts we might have left. */
	for (core = 0; core < v3d->cores; core++)
	V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
	V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);

	cancel_work_sync(&v3d->overflow_mem_work);
	}

	/** Reinitializes interrupt registers when a GPU reset is performed. */
	void v3d_irq_reset(struct v3d_dev *v3d)
	{
	v3d_irq_enable(v3d);
	}