| /* Agere Systems Inc. |
| * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs |
| * |
| * Copyright © 2005 Agere Systems Inc. |
| * All rights reserved. |
| * http://www.agere.com |
| * |
| * Copyright (c) 2011 Mark Einon <mark.einon@gmail.com> |
| * |
| *------------------------------------------------------------------------------ |
| * |
| * SOFTWARE LICENSE |
| * |
| * This software is provided subject to the following terms and conditions, |
| * which you should read carefully before using the software. Using this |
| * software indicates your acceptance of these terms and conditions. If you do |
| * not agree with these terms and conditions, do not use the software. |
| * |
| * Copyright © 2005 Agere Systems Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source or binary forms, with or without |
| * modifications, are permitted provided that the following conditions are met: |
| * |
| * . Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following Disclaimer as comments in the code as |
| * well as in the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * . Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following Disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * . Neither the name of Agere Systems Inc. nor the names of the contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * Disclaimer |
| * |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY |
| * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN |
| * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| |
| #include <linux/sched.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/ctype.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/interrupt.h> |
| #include <linux/in.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_arp.h> |
| #include <linux/ioport.h> |
| #include <linux/crc32.h> |
| #include <linux/random.h> |
| #include <linux/phy.h> |
| |
| #include "et131x.h" |
| |
| MODULE_AUTHOR("Victor Soriano <vjsoriano@agere.com>"); |
| MODULE_AUTHOR("Mark Einon <mark.einon@gmail.com>"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere Systems"); |
| |
| /* EEPROM defines */ |
| #define MAX_NUM_REGISTER_POLLS 1000 |
| #define MAX_NUM_WRITE_RETRIES 2 |
| |
| /* MAC defines */ |
| #define COUNTER_WRAP_16_BIT 0x10000 |
| #define COUNTER_WRAP_12_BIT 0x1000 |
| |
| /* PCI defines */ |
| #define INTERNAL_MEM_SIZE 0x400 /* 1024 of internal memory */ |
| #define INTERNAL_MEM_RX_OFFSET 0x1FF /* 50% Tx, 50% Rx */ |
| |
| /* ISR defines */ |
| /* For interrupts, normal running is: |
| * rxdma_xfr_done, phy_interrupt, mac_stat_interrupt, |
| * watchdog_interrupt & txdma_xfer_done |
| * |
| * In both cases, when flow control is enabled for either Tx or bi-direction, |
| * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the |
| * buffer rings are running low. |
| */ |
| #define INT_MASK_DISABLE 0xffffffff |
| |
| /* NOTE: Masking out MAC_STAT Interrupt for now... |
| * #define INT_MASK_ENABLE 0xfff6bf17 |
| * #define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7 |
| */ |
| #define INT_MASK_ENABLE 0xfffebf17 |
| #define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7 |
| |
| /* General defines */ |
| /* Packet and header sizes */ |
| #define NIC_MIN_PACKET_SIZE 60 |
| |
| /* Multicast list size */ |
| #define NIC_MAX_MCAST_LIST 128 |
| |
| /* Supported Filters */ |
| #define ET131X_PACKET_TYPE_DIRECTED 0x0001 |
| #define ET131X_PACKET_TYPE_MULTICAST 0x0002 |
| #define ET131X_PACKET_TYPE_BROADCAST 0x0004 |
| #define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008 |
| #define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010 |
| |
| /* Tx Timeout */ |
| #define ET131X_TX_TIMEOUT (1 * HZ) |
| #define NIC_SEND_HANG_THRESHOLD 0 |
| |
| /* MP_ADAPTER flags */ |
| #define FMP_ADAPTER_INTERRUPT_IN_USE 0x00000008 |
| |
| /* MP_SHARED flags */ |
| #define FMP_ADAPTER_LOWER_POWER 0x00200000 |
| |
| #define FMP_ADAPTER_NON_RECOVER_ERROR 0x00800000 |
| #define FMP_ADAPTER_HARDWARE_ERROR 0x04000000 |
| |
| #define FMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000 |
| |
| /* Some offsets in PCI config space that are actually used. */ |
| #define ET1310_PCI_MAC_ADDRESS 0xA4 |
| #define ET1310_PCI_EEPROM_STATUS 0xB2 |
| #define ET1310_PCI_ACK_NACK 0xC0 |
| #define ET1310_PCI_REPLAY 0xC2 |
| #define ET1310_PCI_L0L1LATENCY 0xCF |
| |
| /* PCI Product IDs */ |
| #define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */ |
| #define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */ |
| |
| /* Define order of magnitude converter */ |
| #define NANO_IN_A_MICRO 1000 |
| |
| #define PARM_RX_NUM_BUFS_DEF 4 |
| #define PARM_RX_TIME_INT_DEF 10 |
| #define PARM_RX_MEM_END_DEF 0x2bc |
| #define PARM_TX_TIME_INT_DEF 40 |
| #define PARM_TX_NUM_BUFS_DEF 4 |
| #define PARM_DMA_CACHE_DEF 0 |
| |
| /* RX defines */ |
| #define FBR_CHUNKS 32 |
| #define MAX_DESC_PER_RING_RX 1024 |
| |
| /* number of RFDs - default and min */ |
| #define RFD_LOW_WATER_MARK 40 |
| #define NIC_DEFAULT_NUM_RFD 1024 |
| #define NUM_FBRS 2 |
| |
| #define MAX_PACKETS_HANDLED 256 |
| |
| #define ALCATEL_MULTICAST_PKT 0x01000000 |
| #define ALCATEL_BROADCAST_PKT 0x02000000 |
| |
| /* typedefs for Free Buffer Descriptors */ |
| struct fbr_desc { |
| u32 addr_lo; |
| u32 addr_hi; |
| u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */ |
| }; |
| |
| /* Packet Status Ring Descriptors |
| * |
| * Word 0: |
| * |
| * top 16 bits are from the Alcatel Status Word as enumerated in |
| * PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) |
| * |
| * 0: hp hash pass |
| * 1: ipa IP checksum assist |
| * 2: ipp IP checksum pass |
| * 3: tcpa TCP checksum assist |
| * 4: tcpp TCP checksum pass |
| * 5: wol WOL Event |
| * 6: rxmac_error RXMAC Error Indicator |
| * 7: drop Drop packet |
| * 8: ft Frame Truncated |
| * 9: jp Jumbo Packet |
| * 10: vp VLAN Packet |
| * 11-15: unused |
| * 16: asw_prev_pkt_dropped e.g. IFG too small on previous |
| * 17: asw_RX_DV_event short receive event detected |
| * 18: asw_false_carrier_event bad carrier since last good packet |
| * 19: asw_code_err one or more nibbles signalled as errors |
| * 20: asw_CRC_err CRC error |
| * 21: asw_len_chk_err frame length field incorrect |
| * 22: asw_too_long frame length > 1518 bytes |
| * 23: asw_OK valid CRC + no code error |
| * 24: asw_multicast has a multicast address |
| * 25: asw_broadcast has a broadcast address |
| * 26: asw_dribble_nibble spurious bits after EOP |
| * 27: asw_control_frame is a control frame |
| * 28: asw_pause_frame is a pause frame |
| * 29: asw_unsupported_op unsupported OP code |
| * 30: asw_VLAN_tag VLAN tag detected |
| * 31: asw_long_evt Rx long event |
| * |
| * Word 1: |
| * 0-15: length length in bytes |
| * 16-25: bi Buffer Index |
| * 26-27: ri Ring Index |
| * 28-31: reserved |
| */ |
| struct pkt_stat_desc { |
| u32 word0; |
| u32 word1; |
| }; |
| |
| /* Typedefs for the RX DMA status word */ |
| |
| /* rx status word 0 holds part of the status bits of the Rx DMA engine |
| * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word |
| * which contains the Free Buffer ring 0 and 1 available offset. |
| * |
| * bit 0-9 FBR1 offset |
| * bit 10 Wrap flag for FBR1 |
| * bit 16-25 FBR0 offset |
| * bit 26 Wrap flag for FBR0 |
| */ |
| |
| /* RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine |
| * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word |
| * which contains the Packet Status Ring available offset. |
| * |
| * bit 0-15 reserved |
| * bit 16-27 PSRoffset |
| * bit 28 PSRwrap |
| * bit 29-31 unused |
| */ |
| |
| /* struct rx_status_block is a structure representing the status of the Rx |
| * DMA engine it sits in free memory, and is pointed to by 0x101c / 0x1020 |
| */ |
| struct rx_status_block { |
| u32 word0; |
| u32 word1; |
| }; |
| |
| /* Structure for look-up table holding free buffer ring pointers, addresses |
| * and state. |
| */ |
| struct fbr_lookup { |
| void *virt[MAX_DESC_PER_RING_RX]; |
| u32 bus_high[MAX_DESC_PER_RING_RX]; |
| u32 bus_low[MAX_DESC_PER_RING_RX]; |
| void *ring_virtaddr; |
| dma_addr_t ring_physaddr; |
| void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; |
| dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; |
| u32 local_full; |
| u32 num_entries; |
| dma_addr_t buffsize; |
| }; |
| |
| /* struct rx_ring is the structure representing the adaptor's local |
| * reference(s) to the rings |
| */ |
| struct rx_ring { |
| struct fbr_lookup *fbr[NUM_FBRS]; |
| void *ps_ring_virtaddr; |
| dma_addr_t ps_ring_physaddr; |
| u32 local_psr_full; |
| u32 psr_entries; |
| |
| struct rx_status_block *rx_status_block; |
| dma_addr_t rx_status_bus; |
| |
| struct list_head recv_list; |
| u32 num_ready_recv; |
| |
| u32 num_rfd; |
| |
| bool unfinished_receives; |
| }; |
| |
| /* TX defines */ |
| /* word 2 of the control bits in the Tx Descriptor ring for the ET-1310 |
| * |
| * 0-15: length of packet |
| * 16-27: VLAN tag |
| * 28: VLAN CFI |
| * 29-31: VLAN priority |
| * |
| * word 3 of the control bits in the Tx Descriptor ring for the ET-1310 |
| * |
| * 0: last packet in the sequence |
| * 1: first packet in the sequence |
| * 2: interrupt the processor when this pkt sent |
| * 3: Control word - no packet data |
| * 4: Issue half-duplex backpressure : XON/XOFF |
| * 5: send pause frame |
| * 6: Tx frame has error |
| * 7: append CRC |
| * 8: MAC override |
| * 9: pad packet |
| * 10: Packet is a Huge packet |
| * 11: append VLAN tag |
| * 12: IP checksum assist |
| * 13: TCP checksum assist |
| * 14: UDP checksum assist |
| */ |
| #define TXDESC_FLAG_LASTPKT 0x0001 |
| #define TXDESC_FLAG_FIRSTPKT 0x0002 |
| #define TXDESC_FLAG_INTPROC 0x0004 |
| |
| /* struct tx_desc represents each descriptor on the ring */ |
| struct tx_desc { |
| u32 addr_hi; |
| u32 addr_lo; |
| u32 len_vlan; /* control words how to xmit the */ |
| u32 flags; /* data (detailed above) */ |
| }; |
| |
| /* The status of the Tx DMA engine it sits in free memory, and is pointed to |
| * by 0x101c / 0x1020. This is a DMA10 type |
| */ |
| |
| /* TCB (Transmit Control Block: Host Side) */ |
| struct tcb { |
| struct tcb *next; /* Next entry in ring */ |
| u32 count; /* Used to spot stuck/lost packets */ |
| u32 stale; /* Used to spot stuck/lost packets */ |
| struct sk_buff *skb; /* Network skb we are tied to */ |
| u32 index; /* Ring indexes */ |
| u32 index_start; |
| }; |
| |
| /* Structure representing our local reference(s) to the ring */ |
| struct tx_ring { |
| /* TCB (Transmit Control Block) memory and lists */ |
| struct tcb *tcb_ring; |
| |
| /* List of TCBs that are ready to be used */ |
| struct tcb *tcb_qhead; |
| struct tcb *tcb_qtail; |
| |
| /* list of TCBs that are currently being sent. */ |
| struct tcb *send_head; |
| struct tcb *send_tail; |
| int used; |
| |
| /* The actual descriptor ring */ |
| struct tx_desc *tx_desc_ring; |
| dma_addr_t tx_desc_ring_pa; |
| |
| /* send_idx indicates where we last wrote to in the descriptor ring. */ |
| u32 send_idx; |
| |
| /* The location of the write-back status block */ |
| u32 *tx_status; |
| dma_addr_t tx_status_pa; |
| |
| /* Packets since the last IRQ: used for interrupt coalescing */ |
| int since_irq; |
| }; |
| |
| /* Do not change these values: if changed, then change also in respective |
| * TXdma and Rxdma engines |
| */ |
| #define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */ |
| #define NUM_TCB 64 |
| |
| /* These values are all superseded by registry entries to facilitate tuning. |
| * Once the desired performance has been achieved, the optimal registry values |
| * should be re-populated to these #defines: |
| */ |
| #define TX_ERROR_PERIOD 1000 |
| |
| #define LO_MARK_PERCENT_FOR_PSR 15 |
| #define LO_MARK_PERCENT_FOR_RX 15 |
| |
| /* RFD (Receive Frame Descriptor) */ |
| struct rfd { |
| struct list_head list_node; |
| struct sk_buff *skb; |
| u32 len; /* total size of receive frame */ |
| u16 bufferindex; |
| u8 ringindex; |
| }; |
| |
| /* Flow Control */ |
| #define FLOW_BOTH 0 |
| #define FLOW_TXONLY 1 |
| #define FLOW_RXONLY 2 |
| #define FLOW_NONE 3 |
| |
| /* Struct to define some device statistics */ |
| struct ce_stats { |
| u32 multicast_pkts_rcvd; |
| u32 rcvd_pkts_dropped; |
| |
| u32 tx_underflows; |
| u32 tx_collisions; |
| u32 tx_excessive_collisions; |
| u32 tx_first_collisions; |
| u32 tx_late_collisions; |
| u32 tx_max_pkt_errs; |
| u32 tx_deferred; |
| |
| u32 rx_overflows; |
| u32 rx_length_errs; |
| u32 rx_align_errs; |
| u32 rx_crc_errs; |
| u32 rx_code_violations; |
| u32 rx_other_errs; |
| |
| u32 interrupt_status; |
| }; |
| |
| /* The private adapter structure */ |
| struct et131x_adapter { |
| struct net_device *netdev; |
| struct pci_dev *pdev; |
| struct mii_bus *mii_bus; |
| struct phy_device *phydev; |
| struct napi_struct napi; |
| |
| /* Flags that indicate current state of the adapter */ |
| u32 flags; |
| |
| /* local link state, to determine if a state change has occurred */ |
| int link; |
| |
| /* Configuration */ |
| u8 rom_addr[ETH_ALEN]; |
| u8 addr[ETH_ALEN]; |
| bool has_eeprom; |
| u8 eeprom_data[2]; |
| |
| spinlock_t tcb_send_qlock; /* protects the tx_ring send tcb list */ |
| spinlock_t tcb_ready_qlock; /* protects the tx_ring ready tcb list */ |
| spinlock_t rcv_lock; /* protects the rx_ring receive list */ |
| |
| /* Packet Filter and look ahead size */ |
| u32 packet_filter; |
| |
| /* multicast list */ |
| u32 multicast_addr_count; |
| u8 multicast_list[NIC_MAX_MCAST_LIST][ETH_ALEN]; |
| |
| /* Pointer to the device's PCI register space */ |
| struct address_map __iomem *regs; |
| |
| /* Registry parameters */ |
| u8 wanted_flow; /* Flow we want for 802.3x flow control */ |
| u32 registry_jumbo_packet; /* Max supported ethernet packet size */ |
| |
| /* Derived from the registry: */ |
| u8 flow; /* flow control validated by the far-end */ |
| |
| /* Minimize init-time */ |
| struct timer_list error_timer; |
| |
| /* variable putting the phy into coma mode when boot up with no cable |
| * plugged in after 5 seconds |
| */ |
| u8 boot_coma; |
| |
| /* Tx Memory Variables */ |
| struct tx_ring tx_ring; |
| |
| /* Rx Memory Variables */ |
| struct rx_ring rx_ring; |
| |
| struct ce_stats stats; |
| }; |
| |
| static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status) |
| { |
| u32 reg; |
| int i; |
| |
| /* 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and |
| * bits 7,1:0 both equal to 1, at least once after reset. |
| * Subsequent operations need only to check that bits 1:0 are equal |
| * to 1 prior to starting a single byte read/write |
| */ |
| for (i = 0; i < MAX_NUM_REGISTER_POLLS; i++) { |
| if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP, ®)) |
| return -EIO; |
| |
| /* I2C idle and Phy Queue Avail both true */ |
| if ((reg & 0x3000) == 0x3000) { |
| if (status) |
| *status = reg; |
| return reg & 0xFF; |
| } |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int index = 0; |
| int retries; |
| int err = 0; |
| int writeok = 0; |
| u32 status; |
| u32 val = 0; |
| |
| /* For an EEPROM, an I2C single byte write is defined as a START |
| * condition followed by the device address, EEPROM address, one byte |
| * of data and a STOP condition. The STOP condition will trigger the |
| * EEPROM's internally timed write cycle to the nonvolatile memory. |
| * All inputs are disabled during this write cycle and the EEPROM will |
| * not respond to any access until the internal write is complete. |
| */ |
| err = eeprom_wait_ready(pdev, NULL); |
| if (err < 0) |
| return err; |
| |
| /* 2. Write to the LBCIF Control Register: bit 7=1, bit 6=1, bit 3=0, |
| * and bits 1:0 both =0. Bit 5 should be set according to the |
| * type of EEPROM being accessed (1=two byte addressing, 0=one |
| * byte addressing). |
| */ |
| if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, |
| LBCIF_CONTROL_LBCIF_ENABLE | |
| LBCIF_CONTROL_I2C_WRITE)) |
| return -EIO; |
| |
| /* Prepare EEPROM address for Step 3 */ |
| for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { |
| if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr)) |
| break; |
| /* Write the data to the LBCIF Data Register (the I2C write |
| * will begin). |
| */ |
| if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER, data)) |
| break; |
| /* Monitor bit 1:0 of the LBCIF Status Register. When bits |
| * 1:0 are both equal to 1, the I2C write has completed and the |
| * internal write cycle of the EEPROM is about to start. |
| * (bits 1:0 = 01 is a legal state while waiting from both |
| * equal to 1, but bits 1:0 = 10 is invalid and implies that |
| * something is broken). |
| */ |
| err = eeprom_wait_ready(pdev, &status); |
| if (err < 0) |
| return 0; |
| |
| /* Check bit 3 of the LBCIF Status Register. If equal to 1, |
| * an error has occurred.Don't break here if we are revision |
| * 1, this is so we do a blind write for load bug. |
| */ |
| if ((status & LBCIF_STATUS_GENERAL_ERROR) && |
| adapter->pdev->revision == 0) |
| break; |
| |
| /* Check bit 2 of the LBCIF Status Register. If equal to 1 an |
| * ACK error has occurred on the address phase of the write. |
| * This could be due to an actual hardware failure or the |
| * EEPROM may still be in its internal write cycle from a |
| * previous write. This write operation was ignored and must be |
| *repeated later. |
| */ |
| if (status & LBCIF_STATUS_ACK_ERROR) { |
| /* This could be due to an actual hardware failure |
| * or the EEPROM may still be in its internal write |
| * cycle from a previous write. This write operation |
| * was ignored and must be repeated later. |
| */ |
| udelay(10); |
| continue; |
| } |
| |
| writeok = 1; |
| break; |
| } |
| |
| udelay(10); |
| |
| while (1) { |
| if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, |
| LBCIF_CONTROL_LBCIF_ENABLE)) |
| writeok = 0; |
| |
| /* Do read until internal ACK_ERROR goes away meaning write |
| * completed |
| */ |
| do { |
| pci_write_config_dword(pdev, |
| LBCIF_ADDRESS_REGISTER, |
| addr); |
| do { |
| pci_read_config_dword(pdev, |
| LBCIF_DATA_REGISTER, |
| &val); |
| } while ((val & 0x00010000) == 0); |
| } while (val & 0x00040000); |
| |
| if ((val & 0xFF00) != 0xC000 || index == 10000) |
| break; |
| index++; |
| } |
| return writeok ? 0 : -EIO; |
| } |
| |
| static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| int err; |
| u32 status; |
| |
| /* A single byte read is similar to the single byte write, with the |
| * exception of the data flow: |
| */ |
| err = eeprom_wait_ready(pdev, NULL); |
| if (err < 0) |
| return err; |
| /* Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0, |
| * and bits 1:0 both =0. Bit 5 should be set according to the type |
| * of EEPROM being accessed (1=two byte addressing, 0=one byte |
| * addressing). |
| */ |
| if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, |
| LBCIF_CONTROL_LBCIF_ENABLE)) |
| return -EIO; |
| /* Write the address to the LBCIF Address Register (I2C read will |
| * begin). |
| */ |
| if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr)) |
| return -EIO; |
| /* Monitor bit 0 of the LBCIF Status Register. When = 1, I2C read |
| * is complete. (if bit 1 =1 and bit 0 stays = 0, a hardware failure |
| * has occurred). |
| */ |
| err = eeprom_wait_ready(pdev, &status); |
| if (err < 0) |
| return err; |
| /* Regardless of error status, read data byte from LBCIF Data |
| * Register. |
| */ |
| *pdata = err; |
| |
| return (status & LBCIF_STATUS_ACK_ERROR) ? -EIO : 0; |
| } |
| |
| static int et131x_init_eeprom(struct et131x_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| u8 eestatus; |
| |
| pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus); |
| |
| /* THIS IS A WORKAROUND: |
| * I need to call this function twice to get my card in a |
| * LG M1 Express Dual running. I tried also a msleep before this |
| * function, because I thought there could be some time conditions |
| * but it didn't work. Call the whole function twice also work. |
| */ |
| if (pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus)) { |
| dev_err(&pdev->dev, |
| "Could not read PCI config space for EEPROM Status\n"); |
| return -EIO; |
| } |
| |
| /* Determine if the error(s) we care about are present. If they are |
| * present we need to fail. |
| */ |
| if (eestatus & 0x4C) { |
| int write_failed = 0; |
| |
| if (pdev->revision == 0x01) { |
| int i; |
| static const u8 eedata[4] = { 0xFE, 0x13, 0x10, 0xFF }; |
| |
| /* Re-write the first 4 bytes if we have an eeprom |
| * present and the revision id is 1, this fixes the |
| * corruption seen with 1310 B Silicon |
| */ |
| for (i = 0; i < 3; i++) |
| if (eeprom_write(adapter, i, eedata[i]) < 0) |
| write_failed = 1; |
| } |
| if (pdev->revision != 0x01 || write_failed) { |
| dev_err(&pdev->dev, |
| "Fatal EEPROM Status Error - 0x%04x\n", |
| eestatus); |
| |
| /* This error could mean that there was an error |
| * reading the eeprom or that the eeprom doesn't exist. |
| * We will treat each case the same and not try to |
| * gather additional information that normally would |
| * come from the eeprom, like MAC Address |
| */ |
| adapter->has_eeprom = 0; |
| return -EIO; |
| } |
| } |
| adapter->has_eeprom = 1; |
| |
| /* Read the EEPROM for information regarding LED behavior. Refer to |
| * et131x_xcvr_init() for its use. |
| */ |
| eeprom_read(adapter, 0x70, &adapter->eeprom_data[0]); |
| eeprom_read(adapter, 0x71, &adapter->eeprom_data[1]); |
| |
| if (adapter->eeprom_data[0] != 0xcd) |
| /* Disable all optional features */ |
| adapter->eeprom_data[1] = 0x00; |
| |
| return 0; |
| } |
| |
| static void et131x_rx_dma_enable(struct et131x_adapter *adapter) |
| { |
| /* Setup the receive dma configuration register for normal operation */ |
| u32 csr = ET_RXDMA_CSR_FBR1_ENABLE; |
| struct rx_ring *rx_ring = &adapter->rx_ring; |
| |
| if (rx_ring->fbr[1]->buffsize == 4096) |
| csr |= ET_RXDMA_CSR_FBR1_SIZE_LO; |
| else if (rx_ring->fbr[1]->buffsize == 8192) |
| csr |= ET_RXDMA_CSR_FBR1_SIZE_HI; |
| else if (rx_ring->fbr[1]->buffsize == 16384) |
| csr |= ET_RXDMA_CSR_FBR1_SIZE_LO | ET_RXDMA_CSR_FBR1_SIZE_HI; |
| |
| csr |= ET_RXDMA_CSR_FBR0_ENABLE; |
| if (rx_ring->fbr[0]->buffsize == 256) |
| csr |= ET_RXDMA_CSR_FBR0_SIZE_LO; |
| else if (rx_ring->fbr[0]->buffsize == 512) |
| csr |= ET_RXDMA_CSR_FBR0_SIZE_HI; |
| else if (rx_ring->fbr[0]->buffsize == 1024) |
| csr |= ET_RXDMA_CSR_FBR0_SIZE_LO | ET_RXDMA_CSR_FBR0_SIZE_HI; |
| writel(csr, &adapter->regs->rxdma.csr); |
| |
| csr = readl(&adapter->regs->rxdma.csr); |
| if (csr & ET_RXDMA_CSR_HALT_STATUS) { |
| udelay(5); |
| csr = readl(&adapter->regs->rxdma.csr); |
| if (csr & ET_RXDMA_CSR_HALT_STATUS) { |
| dev_err(&adapter->pdev->dev, |
| "RX Dma failed to exit halt state. CSR 0x%08x\n", |
| csr); |
| } |
| } |
| } |
| |
| static void et131x_rx_dma_disable(struct et131x_adapter *adapter) |
| { |
| u32 csr; |
| /* Setup the receive dma configuration register */ |
| writel(ET_RXDMA_CSR_HALT | ET_RXDMA_CSR_FBR1_ENABLE, |
| &adapter->regs->rxdma.csr); |
| csr = readl(&adapter->regs->rxdma.csr); |
| if (!(csr & ET_RXDMA_CSR_HALT_STATUS)) { |
| udelay(5); |
| csr = readl(&adapter->regs->rxdma.csr); |
| if (!(csr & ET_RXDMA_CSR_HALT_STATUS)) |
| dev_err(&adapter->pdev->dev, |
| "RX Dma failed to enter halt state. CSR 0x%08x\n", |
| csr); |
| } |
| } |
| |
| static void et131x_tx_dma_enable(struct et131x_adapter *adapter) |
| { |
| /* Setup the transmit dma configuration register for normal |
| * operation |
| */ |
| writel(ET_TXDMA_SNGL_EPKT | (PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT), |
| &adapter->regs->txdma.csr); |
| } |
| |
| static inline void add_10bit(u32 *v, int n) |
| { |
| *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP); |
| } |
| |
| static inline void add_12bit(u32 *v, int n) |
| { |
| *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP); |
| } |
| |
| static void et1310_config_mac_regs1(struct et131x_adapter *adapter) |
| { |
| struct mac_regs __iomem *macregs = &adapter->regs->mac; |
| u32 station1; |
| u32 station2; |
| u32 ipg; |
| |
| /* First we need to reset everything. Write to MAC configuration |
| * register 1 to perform reset. |
| */ |
| writel(ET_MAC_CFG1_SOFT_RESET | ET_MAC_CFG1_SIM_RESET | |
| ET_MAC_CFG1_RESET_RXMC | ET_MAC_CFG1_RESET_TXMC | |
| ET_MAC_CFG1_RESET_RXFUNC | ET_MAC_CFG1_RESET_TXFUNC, |
| ¯egs->cfg1); |
| |
| /* Next lets configure the MAC Inter-packet gap register */ |
| ipg = 0x38005860; /* IPG1 0x38 IPG2 0x58 B2B 0x60 */ |
| ipg |= 0x50 << 8; /* ifg enforce 0x50 */ |
| writel(ipg, ¯egs->ipg); |
| |
| /* Next lets configure the MAC Half Duplex register */ |
| /* BEB trunc 0xA, Ex Defer, Rexmit 0xF Coll 0x37 */ |
| writel(0x00A1F037, ¯egs->hfdp); |
| |
| /* Next lets configure the MAC Interface Control register */ |
| writel(0, ¯egs->if_ctrl); |
| |
| writel(ET_MAC_MIIMGMT_CLK_RST, ¯egs->mii_mgmt_cfg); |
| |
| /* Next lets configure the MAC Station Address register. These |
| * values are read from the EEPROM during initialization and stored |
| * in the adapter structure. We write what is stored in the adapter |
| * structure to the MAC Station Address registers high and low. This |
| * station address is used for generating and checking pause control |
| * packets. |
| */ |
| station2 = (adapter->addr[1] << ET_MAC_STATION_ADDR2_OC2_SHIFT) | |
| (adapter->addr[0] << ET_MAC_STATION_ADDR2_OC1_SHIFT); |
| station1 = (adapter->addr[5] << ET_MAC_STATION_ADDR1_OC6_SHIFT) | |
| (adapter->addr[4] << ET_MAC_STATION_ADDR1_OC5_SHIFT) | |
| (adapter->addr[3] << ET_MAC_STATION_ADDR1_OC4_SHIFT) | |
| adapter->addr[2]; |
| writel(station1, ¯egs->station_addr_1); |
| writel(station2, ¯egs->station_addr_2); |
| |
| /* Max ethernet packet in bytes that will be passed by the mac without |
| * being truncated. Allow the MAC to pass 4 more than our max packet |
| * size. This is 4 for the Ethernet CRC. |
| * |
| * Packets larger than (registry_jumbo_packet) that do not contain a |
| * VLAN ID will be dropped by the Rx function. |
| */ |
| writel(adapter->registry_jumbo_packet + 4, ¯egs->max_fm_len); |
| |
| /* clear out MAC config reset */ |
| writel(0, ¯egs->cfg1); |
| } |
| |
| static void et1310_config_mac_regs2(struct et131x_adapter *adapter) |
| { |
| int32_t delay = 0; |
| struct mac_regs __iomem *mac = &adapter->regs->mac; |
| struct phy_device *phydev = adapter->phydev; |
| u32 cfg1; |
| u32 cfg2; |
| u32 ifctrl; |
| u32 ctl; |
| |
| ctl = readl(&adapter->regs->txmac.ctl); |
| cfg1 = readl(&mac->cfg1); |
| cfg2 = readl(&mac->cfg2); |
| ifctrl = readl(&mac->if_ctrl); |
| |
| /* Set up the if mode bits */ |
| cfg2 &= ~ET_MAC_CFG2_IFMODE_MASK; |
| if (phydev->speed == SPEED_1000) { |
| cfg2 |= ET_MAC_CFG2_IFMODE_1000; |
| ifctrl &= ~ET_MAC_IFCTRL_PHYMODE; |
| } else { |
| cfg2 |= ET_MAC_CFG2_IFMODE_100; |
| ifctrl |= ET_MAC_IFCTRL_PHYMODE; |
| } |
| |
| cfg1 |= ET_MAC_CFG1_RX_ENABLE | ET_MAC_CFG1_TX_ENABLE | |
| ET_MAC_CFG1_TX_FLOW; |
| |
| cfg1 &= ~(ET_MAC_CFG1_LOOPBACK | ET_MAC_CFG1_RX_FLOW); |
| if (adapter->flow == FLOW_RXONLY || adapter->flow == FLOW_BOTH) |
| cfg1 |= ET_MAC_CFG1_RX_FLOW; |
| writel(cfg1, &mac->cfg1); |
| |
| /* Now we need to initialize the MAC Configuration 2 register */ |
| /* preamble 7, check length, huge frame off, pad crc, crc enable |
| * full duplex off |
| */ |
| cfg2 |= 0x7 << ET_MAC_CFG2_PREAMBLE_SHIFT; |
| cfg2 |= ET_MAC_CFG2_IFMODE_LEN_CHECK; |
| cfg2 |= ET_MAC_CFG2_IFMODE_PAD_CRC; |
| cfg2 |= ET_MAC_CFG2_IFMODE_CRC_ENABLE; |
| cfg2 &= ~ET_MAC_CFG2_IFMODE_HUGE_FRAME; |
| cfg2 &= ~ET_MAC_CFG2_IFMODE_FULL_DPLX; |
| |
| if (phydev->duplex == DUPLEX_FULL) |
| cfg2 |= ET_MAC_CFG2_IFMODE_FULL_DPLX; |
| |
| ifctrl &= ~ET_MAC_IFCTRL_GHDMODE; |
| if (phydev->duplex == DUPLEX_HALF) |
| ifctrl |= ET_MAC_IFCTRL_GHDMODE; |
| |
| writel(ifctrl, &mac->if_ctrl); |
| writel(cfg2, &mac->cfg2); |
| |
| do { |
| udelay(10); |
| delay++; |
| cfg1 = readl(&mac->cfg1); |
| } while ((cfg1 & ET_MAC_CFG1_WAIT) != ET_MAC_CFG1_WAIT && delay < 100); |
| |
| if (delay == 100) { |
| dev_warn(&adapter->pdev->dev, |
| "Syncd bits did not respond correctly cfg1 word 0x%08x\n", |
| cfg1); |
| } |
| |
| ctl |= ET_TX_CTRL_TXMAC_ENABLE | ET_TX_CTRL_FC_DISABLE; |
| writel(ctl, &adapter->regs->txmac.ctl); |
| |
| if (adapter->flags & FMP_ADAPTER_LOWER_POWER) { |
| et131x_rx_dma_enable(adapter); |
| et131x_tx_dma_enable(adapter); |
| } |
| } |
| |
| static int et1310_in_phy_coma(struct et131x_adapter *adapter) |
| { |
| u32 pmcsr = readl(&adapter->regs->global.pm_csr); |
| |
| return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0; |
| } |
| |
| static void et1310_setup_device_for_multicast(struct et131x_adapter *adapter) |
| { |
| struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; |
| u32 hash1 = 0; |
| u32 hash2 = 0; |
| u32 hash3 = 0; |
| u32 hash4 = 0; |
| u32 pm_csr; |
| |
| /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision |
| * the multi-cast LIST. If it is NOT specified, (and "ALL" is not |
| * specified) then we should pass NO multi-cast addresses to the |
| * driver. |
| */ |
| if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) { |
| int i; |
| |
| /* Loop through our multicast array and set up the device */ |
| for (i = 0; i < adapter->multicast_addr_count; i++) { |
| u32 result; |
| |
| result = ether_crc(6, adapter->multicast_list[i]); |
| |
| result = (result & 0x3F800000) >> 23; |
| |
| if (result < 32) { |
| hash1 |= (1 << result); |
| } else if ((31 < result) && (result < 64)) { |
| result -= 32; |
| hash2 |= (1 << result); |
| } else if ((63 < result) && (result < 96)) { |
| result -= 64; |
| hash3 |= (1 << result); |
| } else { |
| result -= 96; |
| hash4 |= (1 << result); |
| } |
| } |
| } |
| |
| /* Write out the new hash to the device */ |
| pm_csr = readl(&adapter->regs->global.pm_csr); |
| if (!et1310_in_phy_coma(adapter)) { |
| writel(hash1, &rxmac->multi_hash1); |
| writel(hash2, &rxmac->multi_hash2); |
| writel(hash3, &rxmac->multi_hash3); |
| writel(hash4, &rxmac->multi_hash4); |
| } |
| } |
| |
| static void et1310_setup_device_for_unicast(struct et131x_adapter *adapter) |
| { |
| struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; |
| u32 uni_pf1; |
| u32 uni_pf2; |
| u32 uni_pf3; |
| u32 pm_csr; |
| |
| /* Set up unicast packet filter reg 3 to be the first two octets of |
| * the MAC address for both address |
| * |
| * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the |
| * MAC address for second address |
| * |
| * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the |
| * MAC address for first address |
| */ |
| uni_pf3 = (adapter->addr[0] << ET_RX_UNI_PF_ADDR2_1_SHIFT) | |
| (adapter->addr[1] << ET_RX_UNI_PF_ADDR2_2_SHIFT) | |
| (adapter->addr[0] << ET_RX_UNI_PF_ADDR1_1_SHIFT) | |
| adapter->addr[1]; |
| |
| uni_pf2 = (adapter->addr[2] << ET_RX_UNI_PF_ADDR2_3_SHIFT) | |
| (adapter->addr[3] << ET_RX_UNI_PF_ADDR2_4_SHIFT) | |
| (adapter->addr[4] << ET_RX_UNI_PF_ADDR2_5_SHIFT) | |
| adapter->addr[5]; |
| |
| uni_pf1 = (adapter->addr[2] << ET_RX_UNI_PF_ADDR1_3_SHIFT) | |
| (adapter->addr[3] << ET_RX_UNI_PF_ADDR1_4_SHIFT) | |
| (adapter->addr[4] << ET_RX_UNI_PF_ADDR1_5_SHIFT) | |
| adapter->addr[5]; |
| |
| pm_csr = readl(&adapter->regs->global.pm_csr); |
| if (!et1310_in_phy_coma(adapter)) { |
| writel(uni_pf1, &rxmac->uni_pf_addr1); |
| writel(uni_pf2, &rxmac->uni_pf_addr2); |
| writel(uni_pf3, &rxmac->uni_pf_addr3); |
| } |
| } |
| |
| static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) |
| { |
| struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; |
| struct phy_device *phydev = adapter->phydev; |
| u32 sa_lo; |
| u32 sa_hi = 0; |
| u32 pf_ctrl = 0; |
| u32 __iomem *wolw; |
| |
| /* Disable the MAC while it is being configured (also disable WOL) */ |
| writel(0x8, &rxmac->ctrl); |
| |
| /* Initialize WOL to disabled. */ |
| writel(0, &rxmac->crc0); |
| writel(0, &rxmac->crc12); |
| writel(0, &rxmac->crc34); |
| |
| /* We need to set the WOL mask0 - mask4 next. We initialize it to |
| * its default Values of 0x00000000 because there are not WOL masks |
| * as of this time. |
| */ |
| for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++) |
| writel(0, wolw); |
| |
| /* Lets setup the WOL Source Address */ |
| sa_lo = (adapter->addr[2] << ET_RX_WOL_LO_SA3_SHIFT) | |
| (adapter->addr[3] << ET_RX_WOL_LO_SA4_SHIFT) | |
| (adapter->addr[4] << ET_RX_WOL_LO_SA5_SHIFT) | |
| adapter->addr[5]; |
| writel(sa_lo, &rxmac->sa_lo); |
| |
| sa_hi = (u32)(adapter->addr[0] << ET_RX_WOL_HI_SA1_SHIFT) | |
| adapter->addr[1]; |
| writel(sa_hi, &rxmac->sa_hi); |
| |
| /* Disable all Packet Filtering */ |
| writel(0, &rxmac->pf_ctrl); |
| |
| /* Let's initialize the Unicast Packet filtering address */ |
| if (adapter->packet_filter & ET131X_PACKET_TYPE_DIRECTED) { |
| et1310_setup_device_for_unicast(adapter); |
| pf_ctrl |= ET_RX_PFCTRL_UNICST_FILTER_ENABLE; |
| } else { |
| writel(0, &rxmac->uni_pf_addr1); |
| writel(0, &rxmac->uni_pf_addr2); |
| writel(0, &rxmac->uni_pf_addr3); |
| } |
| |
| /* Let's initialize the Multicast hash */ |
| if (!(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) { |
| pf_ctrl |= ET_RX_PFCTRL_MLTCST_FILTER_ENABLE; |
| et1310_setup_device_for_multicast(adapter); |
| } |
| |
| /* Runt packet filtering. Didn't work in version A silicon. */ |
| pf_ctrl |= (NIC_MIN_PACKET_SIZE + 4) << ET_RX_PFCTRL_MIN_PKT_SZ_SHIFT; |
| pf_ctrl |= ET_RX_PFCTRL_FRAG_FILTER_ENABLE; |
| |
| if (adapter->registry_jumbo_packet > 8192) |
| /* In order to transmit jumbo packets greater than 8k, the |
| * FIFO between RxMAC and RxDMA needs to be reduced in size |
| * to (16k - Jumbo packet size). In order to implement this, |
| * we must use "cut through" mode in the RxMAC, which chops |
| * packets down into segments which are (max_size * 16). In |
| * this case we selected 256 bytes, since this is the size of |
| * the PCI-Express TLP's that the 1310 uses. |
| * |
| * seg_en on, fc_en off, size 0x10 |
| */ |
| writel(0x41, &rxmac->mcif_ctrl_max_seg); |
| else |
| writel(0, &rxmac->mcif_ctrl_max_seg); |
| |
| writel(0, &rxmac->mcif_water_mark); |
| writel(0, &rxmac->mif_ctrl); |
| writel(0, &rxmac->space_avail); |
| |
| /* Initialize the the mif_ctrl register |
| * bit 3: Receive code error. One or more nibbles were signaled as |
| * errors during the reception of the packet. Clear this |
| * bit in Gigabit, set it in 100Mbit. This was derived |
| * experimentally at UNH. |
| * bit 4: Receive CRC error. The packet's CRC did not match the |
| * internally generated CRC. |
| * bit 5: Receive length check error. Indicates that frame length |
| * field value in the packet does not match the actual data |
| * byte length and is not a type field. |
| * bit 16: Receive frame truncated. |
| * bit 17: Drop packet enable |
| */ |
| if (phydev && phydev->speed == SPEED_100) |
| writel(0x30038, &rxmac->mif_ctrl); |
| else |
| writel(0x30030, &rxmac->mif_ctrl); |
| |
| /* Finally we initialize RxMac to be enabled & WOL disabled. Packet |
| * filter is always enabled since it is where the runt packets are |
| * supposed to be dropped. For version A silicon, runt packet |
| * dropping doesn't work, so it is disabled in the pf_ctrl register, |
| * but we still leave the packet filter on. |
| */ |
| writel(pf_ctrl, &rxmac->pf_ctrl); |
| writel(ET_RX_CTRL_RXMAC_ENABLE | ET_RX_CTRL_WOL_DISABLE, &rxmac->ctrl); |
| } |
| |
| static void et1310_config_txmac_regs(struct et131x_adapter *adapter) |
| { |
| struct txmac_regs __iomem *txmac = &adapter->regs->txmac; |
| |
| /* We need to update the Control Frame Parameters |
| * cfpt - control frame pause timer set to 64 (0x40) |
| * cfep - control frame extended pause timer set to 0x0 |
| */ |
| if (adapter->flow == FLOW_NONE) |
| writel(0, &txmac->cf_param); |
| else |
| writel(0x40, &txmac->cf_param); |
| } |
| |
| static void et1310_config_macstat_regs(struct et131x_adapter *adapter) |
| { |
| struct macstat_regs __iomem *macstat = &adapter->regs->macstat; |
| u32 __iomem *reg; |
| |
| /* initialize all the macstat registers to zero on the device */ |
| for (reg = &macstat->txrx_0_64_byte_frames; |
| reg <= &macstat->carry_reg2; reg++) |
| writel(0, reg); |
| |
| /* Unmask any counters that we want to track the overflow of. |
| * Initially this will be all counters. It may become clear later |
| * that we do not need to track all counters. |
| */ |
| writel(0xFFFFBE32, &macstat->carry_reg1_mask); |
| writel(0xFFFE7E8B, &macstat->carry_reg2_mask); |
| } |
| |
| static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, |
| u8 reg, u16 *value) |
| { |
| struct mac_regs __iomem *mac = &adapter->regs->mac; |
| int status = 0; |
| u32 delay = 0; |
| u32 mii_addr; |
| u32 mii_cmd; |
| u32 mii_indicator; |
| |
| /* Save a local copy of the registers we are dealing with so we can |
| * set them back |
| */ |
| mii_addr = readl(&mac->mii_mgmt_addr); |
| mii_cmd = readl(&mac->mii_mgmt_cmd); |
| |
| /* Stop the current operation */ |
| writel(0, &mac->mii_mgmt_cmd); |
| |
| /* Set up the register we need to read from on the correct PHY */ |
| writel(ET_MAC_MII_ADDR(addr, reg), &mac->mii_mgmt_addr); |
| |
| writel(0x1, &mac->mii_mgmt_cmd); |
| |
| do { |
| udelay(50); |
| delay++; |
| mii_indicator = readl(&mac->mii_mgmt_indicator); |
| } while ((mii_indicator & ET_MAC_MGMT_WAIT) && delay < 50); |
| |
| /* If we hit the max delay, we could not read the register */ |
| if (delay == 50) { |
| dev_warn(&adapter->pdev->dev, |
| "reg 0x%08x could not be read\n", reg); |
| dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", |
| mii_indicator); |
| |
| status = -EIO; |
| goto out; |
| } |
| |
| /* If we hit here we were able to read the register and we need to |
| * return the value to the caller |
| */ |
| *value = readl(&mac->mii_mgmt_stat) & ET_MAC_MIIMGMT_STAT_PHYCRTL_MASK; |
| |
| out: |
| /* Stop the read operation */ |
| writel(0, &mac->mii_mgmt_cmd); |
| |
| /* set the registers we touched back to the state at which we entered |
| * this function |
| */ |
| writel(mii_addr, &mac->mii_mgmt_addr); |
| writel(mii_cmd, &mac->mii_mgmt_cmd); |
| |
| return status; |
| } |
| |
| static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) |
| { |
| struct phy_device *phydev = adapter->phydev; |
| |
| if (!phydev) |
| return -EIO; |
| |
| return et131x_phy_mii_read(adapter, phydev->addr, reg, value); |
| } |
| |
| static int et131x_mii_write(struct et131x_adapter *adapter, u8 addr, u8 reg, |
| u16 value) |
| { |
| struct mac_regs __iomem *mac = &adapter->regs->mac; |
| int status = 0; |
| u32 delay = 0; |
| u32 mii_addr; |
| u32 mii_cmd; |
| u32 mii_indicator; |
| |
| /* Save a local copy of the registers we are dealing with so we can |
| * set them back |
| */ |
| mii_addr = readl(&mac->mii_mgmt_addr); |
| mii_cmd = readl(&mac->mii_mgmt_cmd); |
| |
| /* Stop the current operation */ |
| writel(0, &mac->mii_mgmt_cmd); |
| |
| /* Set up the register we need to write to on the correct PHY */ |
| writel(ET_MAC_MII_ADDR(addr, reg), &mac->mii_mgmt_addr); |
| |
| /* Add the value to write to the registers to the mac */ |
| writel(value, &mac->mii_mgmt_ctrl); |
| |
| do { |
| udelay(50); |
| delay++; |
| mii_indicator = readl(&mac->mii_mgmt_indicator); |
| } while ((mii_indicator & ET_MAC_MGMT_BUSY) && delay < 100); |
| |
| /* If we hit the max delay, we could not write the register */ |
| if (delay == 100) { |
| u16 tmp; |
| |
| dev_warn(&adapter->pdev->dev, |
| "reg 0x%08x could not be written", reg); |
| dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", |
| mii_indicator); |
| dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", |
| readl(&mac->mii_mgmt_cmd)); |
| |
| et131x_mii_read(adapter, reg, &tmp); |
| |
| status = -EIO; |
| } |
| /* Stop the write operation */ |
| writel(0, &mac->mii_mgmt_cmd); |
| |
| /* set the registers we touched back to the state at which we entered |
| * this function |
| */ |
| writel(mii_addr, &mac->mii_mgmt_addr); |
| writel(mii_cmd, &mac->mii_mgmt_cmd); |
| |
| return status; |
| } |
| |
| static void et1310_phy_read_mii_bit(struct et131x_adapter *adapter, |
| u16 regnum, |
| u16 bitnum, |
| u8 *value) |
| { |
| u16 reg; |
| u16 mask = 1 << bitnum; |
| |
| et131x_mii_read(adapter, regnum, ®); |
| |
| *value = (reg & mask) >> bitnum; |
| } |
| |
| static void et1310_config_flow_control(struct et131x_adapter *adapter) |
| { |
| struct phy_device *phydev = adapter->phydev; |
| |
| if (phydev->duplex == DUPLEX_HALF) { |
| adapter->flow = FLOW_NONE; |
| } else { |
| char remote_pause, remote_async_pause; |
| |
| et1310_phy_read_mii_bit(adapter, 5, 10, &remote_pause); |
| et1310_phy_read_mii_bit(adapter, 5, 11, &remote_async_pause); |
| |
| if (remote_pause && remote_async_pause) { |
| adapter->flow = adapter->wanted_flow; |
| } else if (remote_pause && !remote_async_pause) { |
| if (adapter->wanted_flow == FLOW_BOTH) |
| adapter->flow = FLOW_BOTH; |
| else |
| adapter->flow = FLOW_NONE; |
| } else if (!remote_pause && !remote_async_pause) { |
| adapter->flow = FLOW_NONE; |
| } else { |
| if (adapter->wanted_flow == FLOW_BOTH) |
| adapter->flow = FLOW_RXONLY; |
| else |
| adapter->flow = FLOW_NONE; |
| } |
| } |
| } |
| |
| /* et1310_update_macstat_host_counters - Update local copy of the statistics */ |
| static void et1310_update_macstat_host_counters(struct et131x_adapter *adapter) |
| { |
| struct ce_stats *stats = &adapter->stats; |
| struct macstat_regs __iomem *macstat = |
| &adapter->regs->macstat; |
| |
| stats->tx_collisions += readl(&macstat->tx_total_collisions); |
| stats->tx_first_collisions += readl(&macstat->tx_single_collisions); |
| stats->tx_deferred += readl(&macstat->tx_deferred); |
| stats->tx_excessive_collisions += |
| readl(&macstat->tx_multiple_collisions); |
| stats->tx_late_collisions += readl(&macstat->tx_late_collisions); |
| stats->tx_underflows += readl(&macstat->tx_undersize_frames); |
| stats->tx_max_pkt_errs += readl(&macstat->tx_oversize_frames); |
| |
| stats->rx_align_errs += readl(&macstat->rx_align_errs); |
| stats->rx_crc_errs += readl(&macstat->rx_code_errs); |
| stats->rcvd_pkts_dropped += readl(&macstat->rx_drops); |
| stats->rx_overflows += readl(&macstat->rx_oversize_packets); |
| stats->rx_code_violations += readl(&macstat->rx_fcs_errs); |
| stats->rx_length_errs += readl(&macstat->rx_frame_len_errs); |
| stats->rx_other_errs += readl(&macstat->rx_fragment_packets); |
| } |
| |
| /* et1310_handle_macstat_interrupt |
| * |
| * One of the MACSTAT counters has wrapped. Update the local copy of |
| * the statistics held in the adapter structure, checking the "wrap" |
| * bit for each counter. |
| */ |
| static void et1310_handle_macstat_interrupt(struct et131x_adapter *adapter) |
| { |
| u32 carry_reg1; |
| u32 carry_reg2; |
| |
| /* Read the interrupt bits from the register(s). These are Clear On |
| * Write. |
| */ |
| carry_reg1 = readl(&adapter->regs->macstat.carry_reg1); |
| carry_reg2 = readl(&adapter->regs->macstat.carry_reg2); |
| |
| writel(carry_reg1, &adapter->regs->macstat.carry_reg1); |
| writel(carry_reg2, &adapter->regs->macstat.carry_reg2); |
| |
| /* We need to do update the host copy of all the MAC_STAT counters. |
| * For each counter, check it's overflow bit. If the overflow bit is |
| * set, then increment the host version of the count by one complete |
| * revolution of the counter. This routine is called when the counter |
| * block indicates that one of the counters has wrapped. |
| */ |
| if (carry_reg1 & (1 << 14)) |
| adapter->stats.rx_code_violations += COUNTER_WRAP_16_BIT; |
| if (carry_reg1 & (1 << 8)) |
| adapter->stats.rx_align_errs += COUNTER_WRAP_12_BIT; |
| if (carry_reg1 & (1 << 7)) |
| adapter->stats.rx_length_errs += COUNTER_WRAP_16_BIT; |
| if (carry_reg1 & (1 << 2)) |
| adapter->stats.rx_other_errs += COUNTER_WRAP_16_BIT; |
| if (carry_reg1 & (1 << 6)) |
| adapter->stats.rx_crc_errs += COUNTER_WRAP_16_BIT; |
| if (carry_reg1 & (1 << 3)) |
| adapter->stats.rx_overflows += COUNTER_WRAP_16_BIT; |
| if (carry_reg1 & (1 << 0)) |
| adapter->stats.rcvd_pkts_dropped += COUNTER_WRAP_16_BIT; |
| if (carry_reg2 & (1 << 16)) |
| adapter->stats.tx_max_pkt_errs += COUNTER_WRAP_12_BIT; |
| if (carry_reg2 & (1 << 15)) |
| adapter->stats.tx_underflows += COUNTER_WRAP_12_BIT; |
| if (carry_reg2 & (1 << 6)) |
| adapter->stats.tx_first_collisions += COUNTER_WRAP_12_BIT; |
| if (carry_reg2 & (1 << 8)) |
| adapter->stats.tx_deferred += COUNTER_WRAP_12_BIT; |
| if (carry_reg2 & (1 << 5)) |
| adapter->stats.tx_excessive_collisions += COUNTER_WRAP_12_BIT; |
| if (carry_reg2 & (1 << 4)) |
| adapter->stats.tx_late_collisions += COUNTER_WRAP_12_BIT; |
| if (carry_reg2 & (1 << 2)) |
| adapter->stats.tx_collisions += COUNTER_WRAP_12_BIT; |
| } |
| |
| static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg) |
| { |
| struct net_device *netdev = bus->priv; |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| u16 value; |
| int ret; |
| |
| ret = et131x_phy_mii_read(adapter, phy_addr, reg, &value); |
| |
| if (ret < 0) |
| return ret; |
| |
| return value; |
| } |
| |
| static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, |
| int reg, u16 value) |
| { |
| struct net_device *netdev = bus->priv; |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| return et131x_mii_write(adapter, phy_addr, reg, value); |
| } |
| |
| /* et1310_phy_power_switch - PHY power control |
| * @adapter: device to control |
| * @down: true for off/false for back on |
| * |
| * one hundred, ten, one thousand megs |
| * How would you like to have your LAN accessed |
| * Can't you see that this code processed |
| * Phy power, phy power.. |
| */ |
| static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down) |
| { |
| u16 data; |
| struct phy_device *phydev = adapter->phydev; |
| |
| et131x_mii_read(adapter, MII_BMCR, &data); |
| data &= ~BMCR_PDOWN; |
| if (down) |
| data |= BMCR_PDOWN; |
| et131x_mii_write(adapter, phydev->addr, MII_BMCR, data); |
| } |
| |
| /* et131x_xcvr_init - Init the phy if we are setting it into force mode */ |
| static void et131x_xcvr_init(struct et131x_adapter *adapter) |
| { |
| u16 lcr2; |
| struct phy_device *phydev = adapter->phydev; |
| |
| /* Set the LED behavior such that LED 1 indicates speed (off = |
| * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates |
| * link and activity (on for link, blink off for activity). |
| * |
| * NOTE: Some customizations have been added here for specific |
| * vendors; The LED behavior is now determined by vendor data in the |
| * EEPROM. However, the above description is the default. |
| */ |
| if ((adapter->eeprom_data[1] & 0x4) == 0) { |
| et131x_mii_read(adapter, PHY_LED_2, &lcr2); |
| |
| lcr2 &= (ET_LED2_LED_100TX | ET_LED2_LED_1000T); |
| lcr2 |= (LED_VAL_LINKON_ACTIVE << LED_LINK_SHIFT); |
| |
| if ((adapter->eeprom_data[1] & 0x8) == 0) |
| lcr2 |= (LED_VAL_1000BT_100BTX << LED_TXRX_SHIFT); |
| else |
| lcr2 |= (LED_VAL_LINKON << LED_TXRX_SHIFT); |
| |
| et131x_mii_write(adapter, phydev->addr, PHY_LED_2, lcr2); |
| } |
| } |
| |
| /* et131x_configure_global_regs - configure JAGCore global regs */ |
| static void et131x_configure_global_regs(struct et131x_adapter *adapter) |
| { |
| struct global_regs __iomem *regs = &adapter->regs->global; |
| |
| writel(0, ®s->rxq_start_addr); |
| writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr); |
| |
| if (adapter->registry_jumbo_packet < 2048) { |
| /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word |
| * block of RAM that the driver can split between Tx |
| * and Rx as it desires. Our default is to split it |
| * 50/50: |
| */ |
| writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr); |
| writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr); |
| } else if (adapter->registry_jumbo_packet < 8192) { |
| /* For jumbo packets > 2k but < 8k, split 50-50. */ |
| writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr); |
| writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr); |
| } else { |
| /* 9216 is the only packet size greater than 8k that |
| * is available. The Tx buffer has to be big enough |
| * for one whole packet on the Tx side. We'll make |
| * the Tx 9408, and give the rest to Rx |
| */ |
| writel(0x01b3, ®s->rxq_end_addr); |
| writel(0x01b4, ®s->txq_start_addr); |
| } |
| |
| /* Initialize the loopback register. Disable all loopbacks. */ |
| writel(0, ®s->loopback); |
| |
| writel(0, ®s->msi_config); |
| |
| /* By default, disable the watchdog timer. It will be enabled when |
| * a packet is queued. |
| */ |
| writel(0, ®s->watchdog_timer); |
| } |
| |
| /* et131x_config_rx_dma_regs - Start of Rx_DMA init sequence */ |
| static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter) |
| { |
| struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; |
| struct rx_ring *rx_local = &adapter->rx_ring; |
| struct fbr_desc *fbr_entry; |
| u32 entry; |
| u32 psr_num_des; |
| unsigned long flags; |
| u8 id; |
| |
| et131x_rx_dma_disable(adapter); |
| |
| /* Load the completion writeback physical address */ |
| writel(upper_32_bits(rx_local->rx_status_bus), &rx_dma->dma_wb_base_hi); |
| writel(lower_32_bits(rx_local->rx_status_bus), &rx_dma->dma_wb_base_lo); |
| |
| memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block)); |
| |
| /* Set the address and parameters of the packet status ring */ |
| writel(upper_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_hi); |
| writel(lower_32_bits(rx_local->ps_ring_physaddr), &rx_dma->psr_base_lo); |
| writel(rx_local->psr_entries - 1, &rx_dma->psr_num_des); |
| writel(0, &rx_dma->psr_full_offset); |
| |
| psr_num_des = readl(&rx_dma->psr_num_des) & ET_RXDMA_PSR_NUM_DES_MASK; |
| writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100, |
| &rx_dma->psr_min_des); |
| |
| spin_lock_irqsave(&adapter->rcv_lock, flags); |
| |
| /* These local variables track the PSR in the adapter structure */ |
| rx_local->local_psr_full = 0; |
| |
| for (id = 0; id < NUM_FBRS; id++) { |
| u32 __iomem *num_des; |
| u32 __iomem *full_offset; |
| u32 __iomem *min_des; |
| u32 __iomem *base_hi; |
| u32 __iomem *base_lo; |
| struct fbr_lookup *fbr = rx_local->fbr[id]; |
| |
| if (id == 0) { |
| num_des = &rx_dma->fbr0_num_des; |
| full_offset = &rx_dma->fbr0_full_offset; |
| min_des = &rx_dma->fbr0_min_des; |
| base_hi = &rx_dma->fbr0_base_hi; |
| base_lo = &rx_dma->fbr0_base_lo; |
| } else { |
| num_des = &rx_dma->fbr1_num_des; |
| full_offset = &rx_dma->fbr1_full_offset; |
| min_des = &rx_dma->fbr1_min_des; |
| base_hi = &rx_dma->fbr1_base_hi; |
| base_lo = &rx_dma->fbr1_base_lo; |
| } |
| |
| /* Now's the best time to initialize FBR contents */ |
| fbr_entry = fbr->ring_virtaddr; |
| for (entry = 0; entry < fbr->num_entries; entry++) { |
| fbr_entry->addr_hi = fbr->bus_high[entry]; |
| fbr_entry->addr_lo = fbr->bus_low[entry]; |
| fbr_entry->word2 = entry; |
| fbr_entry++; |
| } |
| |
| /* Set the address and parameters of Free buffer ring 1 and 0 */ |
| writel(upper_32_bits(fbr->ring_physaddr), base_hi); |
| writel(lower_32_bits(fbr->ring_physaddr), base_lo); |
| writel(fbr->num_entries - 1, num_des); |
| writel(ET_DMA10_WRAP, full_offset); |
| |
| /* This variable tracks the free buffer ring 1 full position, |
| * so it has to match the above. |
| */ |
| fbr->local_full = ET_DMA10_WRAP; |
| writel(((fbr->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1, |
| min_des); |
| } |
| |
| /* Program the number of packets we will receive before generating an |
| * interrupt. |
| * For version B silicon, this value gets updated once autoneg is |
| *complete. |
| */ |
| writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done); |
| |
| /* The "time_done" is not working correctly to coalesce interrupts |
| * after a given time period, but rather is giving us an interrupt |
| * regardless of whether we have received packets. |
| * This value gets updated once autoneg is complete. |
| */ |
| writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time); |
| |
| spin_unlock_irqrestore(&adapter->rcv_lock, flags); |
| } |
| |
| /* et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore. |
| * |
| * Configure the transmit engine with the ring buffers we have created |
| * and prepare it for use. |
| */ |
| static void et131x_config_tx_dma_regs(struct et131x_adapter *adapter) |
| { |
| struct txdma_regs __iomem *txdma = &adapter->regs->txdma; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| /* Load the hardware with the start of the transmit descriptor ring. */ |
| writel(upper_32_bits(tx_ring->tx_desc_ring_pa), &txdma->pr_base_hi); |
| writel(lower_32_bits(tx_ring->tx_desc_ring_pa), &txdma->pr_base_lo); |
| |
| /* Initialise the transmit DMA engine */ |
| writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des); |
| |
| /* Load the completion writeback physical address */ |
| writel(upper_32_bits(tx_ring->tx_status_pa), &txdma->dma_wb_base_hi); |
| writel(lower_32_bits(tx_ring->tx_status_pa), &txdma->dma_wb_base_lo); |
| |
| *tx_ring->tx_status = 0; |
| |
| writel(0, &txdma->service_request); |
| tx_ring->send_idx = 0; |
| } |
| |
| /* et131x_adapter_setup - Set the adapter up as per cassini+ documentation */ |
| static void et131x_adapter_setup(struct et131x_adapter *adapter) |
| { |
| et131x_configure_global_regs(adapter); |
| et1310_config_mac_regs1(adapter); |
| |
| /* Configure the MMC registers */ |
| /* All we need to do is initialize the Memory Control Register */ |
| writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl); |
| |
| et1310_config_rxmac_regs(adapter); |
| et1310_config_txmac_regs(adapter); |
| |
| et131x_config_rx_dma_regs(adapter); |
| et131x_config_tx_dma_regs(adapter); |
| |
| et1310_config_macstat_regs(adapter); |
| |
| et1310_phy_power_switch(adapter, 0); |
| et131x_xcvr_init(adapter); |
| } |
| |
| /* et131x_soft_reset - Issue soft reset to the hardware, complete for ET1310 */ |
| static void et131x_soft_reset(struct et131x_adapter *adapter) |
| { |
| u32 reg; |
| |
| /* Disable MAC Core */ |
| reg = ET_MAC_CFG1_SOFT_RESET | ET_MAC_CFG1_SIM_RESET | |
| ET_MAC_CFG1_RESET_RXMC | ET_MAC_CFG1_RESET_TXMC | |
| ET_MAC_CFG1_RESET_RXFUNC | ET_MAC_CFG1_RESET_TXFUNC; |
| writel(reg, &adapter->regs->mac.cfg1); |
| |
| reg = ET_RESET_ALL; |
| writel(reg, &adapter->regs->global.sw_reset); |
| |
| reg = ET_MAC_CFG1_RESET_RXMC | ET_MAC_CFG1_RESET_TXMC | |
| ET_MAC_CFG1_RESET_RXFUNC | ET_MAC_CFG1_RESET_TXFUNC; |
| writel(reg, &adapter->regs->mac.cfg1); |
| writel(0, &adapter->regs->mac.cfg1); |
| } |
| |
| static void et131x_enable_interrupts(struct et131x_adapter *adapter) |
| { |
| u32 mask; |
| |
| if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) |
| mask = INT_MASK_ENABLE; |
| else |
| mask = INT_MASK_ENABLE_NO_FLOW; |
| |
| writel(mask, &adapter->regs->global.int_mask); |
| } |
| |
| static void et131x_disable_interrupts(struct et131x_adapter *adapter) |
| { |
| writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask); |
| } |
| |
| static void et131x_tx_dma_disable(struct et131x_adapter *adapter) |
| { |
| /* Setup the transmit dma configuration register */ |
| writel(ET_TXDMA_CSR_HALT | ET_TXDMA_SNGL_EPKT, |
| &adapter->regs->txdma.csr); |
| } |
| |
| static void et131x_enable_txrx(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| et131x_rx_dma_enable(adapter); |
| et131x_tx_dma_enable(adapter); |
| |
| if (adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE) |
| et131x_enable_interrupts(adapter); |
| |
| netif_start_queue(netdev); |
| } |
| |
| static void et131x_disable_txrx(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| netif_stop_queue(netdev); |
| |
| et131x_rx_dma_disable(adapter); |
| et131x_tx_dma_disable(adapter); |
| |
| et131x_disable_interrupts(adapter); |
| } |
| |
| static void et131x_init_send(struct et131x_adapter *adapter) |
| { |
| int i; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| struct tcb *tcb = tx_ring->tcb_ring; |
| |
| tx_ring->tcb_qhead = tcb; |
| |
| memset(tcb, 0, sizeof(struct tcb) * NUM_TCB); |
| |
| for (i = 0; i < NUM_TCB; i++) { |
| tcb->next = tcb + 1; |
| tcb++; |
| } |
| |
| tcb--; |
| tx_ring->tcb_qtail = tcb; |
| tcb->next = NULL; |
| /* Curr send queue should now be empty */ |
| tx_ring->send_head = NULL; |
| tx_ring->send_tail = NULL; |
| } |
| |
| /* et1310_enable_phy_coma |
| * |
| * driver receive an phy status change interrupt while in D0 and check that |
| * phy_status is down. |
| * |
| * -- gate off JAGCore; |
| * -- set gigE PHY in Coma mode |
| * -- wake on phy_interrupt; Perform software reset JAGCore, |
| * re-initialize jagcore and gigE PHY |
| */ |
| static void et1310_enable_phy_coma(struct et131x_adapter *adapter) |
| { |
| u32 pmcsr = readl(&adapter->regs->global.pm_csr); |
| |
| /* Stop sending packets. */ |
| adapter->flags |= FMP_ADAPTER_LOWER_POWER; |
| |
| /* Wait for outstanding Receive packets */ |
| et131x_disable_txrx(adapter->netdev); |
| |
| /* Gate off JAGCore 3 clock domains */ |
| pmcsr &= ~ET_PMCSR_INIT; |
| writel(pmcsr, &adapter->regs->global.pm_csr); |
| |
| /* Program gigE PHY in to Coma mode */ |
| pmcsr |= ET_PM_PHY_SW_COMA; |
| writel(pmcsr, &adapter->regs->global.pm_csr); |
| } |
| |
| static void et1310_disable_phy_coma(struct et131x_adapter *adapter) |
| { |
| u32 pmcsr; |
| |
| pmcsr = readl(&adapter->regs->global.pm_csr); |
| |
| /* Disable phy_sw_coma register and re-enable JAGCore clocks */ |
| pmcsr |= ET_PMCSR_INIT; |
| pmcsr &= ~ET_PM_PHY_SW_COMA; |
| writel(pmcsr, &adapter->regs->global.pm_csr); |
| |
| /* Restore the GbE PHY speed and duplex modes; |
| * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY |
| */ |
| |
| /* Re-initialize the send structures */ |
| et131x_init_send(adapter); |
| |
| /* Bring the device back to the state it was during init prior to |
| * autonegotiation being complete. This way, when we get the auto-neg |
| * complete interrupt, we can complete init by calling ConfigMacREGS2. |
| */ |
| et131x_soft_reset(adapter); |
| |
| et131x_adapter_setup(adapter); |
| |
| /* Allow Tx to restart */ |
| adapter->flags &= ~FMP_ADAPTER_LOWER_POWER; |
| |
| et131x_enable_txrx(adapter->netdev); |
| } |
| |
| static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit) |
| { |
| u32 tmp_free_buff_ring = *free_buff_ring; |
| |
| tmp_free_buff_ring++; |
| /* This works for all cases where limit < 1024. The 1023 case |
| * works because 1023++ is 1024 which means the if condition is not |
| * taken but the carry of the bit into the wrap bit toggles the wrap |
| * value correctly |
| */ |
| if ((tmp_free_buff_ring & ET_DMA10_MASK) > limit) { |
| tmp_free_buff_ring &= ~ET_DMA10_MASK; |
| tmp_free_buff_ring ^= ET_DMA10_WRAP; |
| } |
| /* For the 1023 case */ |
| tmp_free_buff_ring &= (ET_DMA10_MASK | ET_DMA10_WRAP); |
| *free_buff_ring = tmp_free_buff_ring; |
| return tmp_free_buff_ring; |
| } |
| |
| /* et131x_rx_dma_memory_alloc |
| * |
| * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required, |
| * and the Packet Status Ring. |
| */ |
| static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter) |
| { |
| u8 id; |
| u32 i, j; |
| u32 bufsize; |
| u32 psr_size; |
| u32 fbr_chunksize; |
| struct rx_ring *rx_ring = &adapter->rx_ring; |
| struct fbr_lookup *fbr; |
| |
| /* Alloc memory for the lookup table */ |
| rx_ring->fbr[0] = kzalloc(sizeof(*fbr), GFP_KERNEL); |
| if (rx_ring->fbr[0] == NULL) |
| return -ENOMEM; |
| rx_ring->fbr[1] = kzalloc(sizeof(*fbr), GFP_KERNEL); |
| if (rx_ring->fbr[1] == NULL) |
| return -ENOMEM; |
| |
| /* The first thing we will do is configure the sizes of the buffer |
| * rings. These will change based on jumbo packet support. Larger |
| * jumbo packets increases the size of each entry in FBR0, and the |
| * number of entries in FBR0, while at the same time decreasing the |
| * number of entries in FBR1. |
| * |
| * FBR1 holds "large" frames, FBR0 holds "small" frames. If FBR1 |
| * entries are huge in order to accommodate a "jumbo" frame, then it |
| * will have less entries. Conversely, FBR1 will now be relied upon |
| * to carry more "normal" frames, thus it's entry size also increases |
| * and the number of entries goes up too (since it now carries |
| * "small" + "regular" packets. |
| * |
| * In this scheme, we try to maintain 512 entries between the two |
| * rings. Also, FBR1 remains a constant size - when it's size doubles |
| * the number of entries halves. FBR0 increases in size, however. |
| */ |
| if (adapter->registry_jumbo_packet < 2048) { |
| rx_ring->fbr[0]->buffsize = 256; |
| rx_ring->fbr[0]->num_entries = 512; |
| rx_ring->fbr[1]->buffsize = 2048; |
| rx_ring->fbr[1]->num_entries = 512; |
| } else if (adapter->registry_jumbo_packet < 4096) { |
| rx_ring->fbr[0]->buffsize = 512; |
| rx_ring->fbr[0]->num_entries = 1024; |
| rx_ring->fbr[1]->buffsize = 4096; |
| rx_ring->fbr[1]->num_entries = 512; |
| } else { |
| rx_ring->fbr[0]->buffsize = 1024; |
| rx_ring->fbr[0]->num_entries = 768; |
| rx_ring->fbr[1]->buffsize = 16384; |
| rx_ring->fbr[1]->num_entries = 128; |
| } |
| |
| rx_ring->psr_entries = rx_ring->fbr[0]->num_entries + |
| rx_ring->fbr[1]->num_entries; |
| |
| for (id = 0; id < NUM_FBRS; id++) { |
| fbr = rx_ring->fbr[id]; |
| /* Allocate an area of memory for Free Buffer Ring */ |
| bufsize = sizeof(struct fbr_desc) * fbr->num_entries; |
| fbr->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev, |
| bufsize, |
| &fbr->ring_physaddr, |
| GFP_KERNEL); |
| if (!fbr->ring_virtaddr) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Free Buffer Ring %d\n", |
| id); |
| return -ENOMEM; |
| } |
| } |
| |
| for (id = 0; id < NUM_FBRS; id++) { |
| fbr = rx_ring->fbr[id]; |
| fbr_chunksize = (FBR_CHUNKS * fbr->buffsize); |
| |
| for (i = 0; i < fbr->num_entries / FBR_CHUNKS; i++) { |
| dma_addr_t fbr_physaddr; |
| |
| fbr->mem_virtaddrs[i] = dma_alloc_coherent( |
| &adapter->pdev->dev, fbr_chunksize, |
| &fbr->mem_physaddrs[i], |
| GFP_KERNEL); |
| |
| if (!fbr->mem_virtaddrs[i]) { |
| dev_err(&adapter->pdev->dev, |
| "Could not alloc memory\n"); |
| return -ENOMEM; |
| } |
| |
| /* See NOTE in "Save Physical Address" comment above */ |
| fbr_physaddr = fbr->mem_physaddrs[i]; |
| |
| for (j = 0; j < FBR_CHUNKS; j++) { |
| u32 k = (i * FBR_CHUNKS) + j; |
| |
| /* Save the Virtual address of this index for |
| * quick access later |
| */ |
| fbr->virt[k] = (u8 *)fbr->mem_virtaddrs[i] + |
| (j * fbr->buffsize); |
| |
| /* now store the physical address in the |
| * descriptor so the device can access it |
| */ |
| fbr->bus_high[k] = upper_32_bits(fbr_physaddr); |
| fbr->bus_low[k] = lower_32_bits(fbr_physaddr); |
| fbr_physaddr += fbr->buffsize; |
| } |
| } |
| } |
| |
| /* Allocate an area of memory for FIFO of Packet Status ring entries */ |
| psr_size = sizeof(struct pkt_stat_desc) * rx_ring->psr_entries; |
| |
| rx_ring->ps_ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev, |
| psr_size, |
| &rx_ring->ps_ring_physaddr, |
| GFP_KERNEL); |
| |
| if (!rx_ring->ps_ring_virtaddr) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Packet Status Ring\n"); |
| return -ENOMEM; |
| } |
| |
| /* Allocate an area of memory for writeback of status information */ |
| rx_ring->rx_status_block = dma_alloc_coherent(&adapter->pdev->dev, |
| sizeof(struct rx_status_block), |
| &rx_ring->rx_status_bus, |
| GFP_KERNEL); |
| if (!rx_ring->rx_status_block) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Status Block\n"); |
| return -ENOMEM; |
| } |
| rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD; |
| |
| /* The RFDs are going to be put on lists later on, so initialize the |
| * lists now. |
| */ |
| INIT_LIST_HEAD(&rx_ring->recv_list); |
| return 0; |
| } |
| |
| static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter) |
| { |
| u8 id; |
| u32 ii; |
| u32 bufsize; |
| u32 psr_size; |
| struct rfd *rfd; |
| struct rx_ring *rx_ring = &adapter->rx_ring; |
| struct fbr_lookup *fbr; |
| |
| /* Free RFDs and associated packet descriptors */ |
| WARN_ON(rx_ring->num_ready_recv != rx_ring->num_rfd); |
| |
| while (!list_empty(&rx_ring->recv_list)) { |
| rfd = list_entry(rx_ring->recv_list.next, |
| struct rfd, list_node); |
| |
| list_del(&rfd->list_node); |
| rfd->skb = NULL; |
| kfree(rfd); |
| } |
| |
| /* Free Free Buffer Rings */ |
| for (id = 0; id < NUM_FBRS; id++) { |
| fbr = rx_ring->fbr[id]; |
| |
| if (!fbr || !fbr->ring_virtaddr) |
| continue; |
| |
| /* First the packet memory */ |
| for (ii = 0; ii < fbr->num_entries / FBR_CHUNKS; ii++) { |
| if (fbr->mem_virtaddrs[ii]) { |
| bufsize = fbr->buffsize * FBR_CHUNKS; |
| |
| dma_free_coherent(&adapter->pdev->dev, |
| bufsize, |
| fbr->mem_virtaddrs[ii], |
| fbr->mem_physaddrs[ii]); |
| |
| fbr->mem_virtaddrs[ii] = NULL; |
| } |
| } |
| |
| bufsize = sizeof(struct fbr_desc) * fbr->num_entries; |
| |
| dma_free_coherent(&adapter->pdev->dev, |
| bufsize, |
| fbr->ring_virtaddr, |
| fbr->ring_physaddr); |
| |
| fbr->ring_virtaddr = NULL; |
| } |
| |
| /* Free Packet Status Ring */ |
| if (rx_ring->ps_ring_virtaddr) { |
| psr_size = sizeof(struct pkt_stat_desc) * rx_ring->psr_entries; |
| |
| dma_free_coherent(&adapter->pdev->dev, psr_size, |
| rx_ring->ps_ring_virtaddr, |
| rx_ring->ps_ring_physaddr); |
| |
| rx_ring->ps_ring_virtaddr = NULL; |
| } |
| |
| /* Free area of memory for the writeback of status information */ |
| if (rx_ring->rx_status_block) { |
| dma_free_coherent(&adapter->pdev->dev, |
| sizeof(struct rx_status_block), |
| rx_ring->rx_status_block, |
| rx_ring->rx_status_bus); |
| rx_ring->rx_status_block = NULL; |
| } |
| |
| /* Free the FBR Lookup Table */ |
| kfree(rx_ring->fbr[0]); |
| kfree(rx_ring->fbr[1]); |
| |
| /* Reset Counters */ |
| rx_ring->num_ready_recv = 0; |
| } |
| |
| /* et131x_init_recv - Initialize receive data structures */ |
| static int et131x_init_recv(struct et131x_adapter *adapter) |
| { |
| struct rfd *rfd; |
| u32 rfdct; |
| struct rx_ring *rx_ring = &adapter->rx_ring; |
| |
| /* Setup each RFD */ |
| for (rfdct = 0; rfdct < rx_ring->num_rfd; rfdct++) { |
| rfd = kzalloc(sizeof(*rfd), GFP_ATOMIC | GFP_DMA); |
| if (!rfd) |
| return -ENOMEM; |
| |
| rfd->skb = NULL; |
| |
| /* Add this RFD to the recv_list */ |
| list_add_tail(&rfd->list_node, &rx_ring->recv_list); |
| |
| /* Increment the available RFD's */ |
| rx_ring->num_ready_recv++; |
| } |
| |
| return 0; |
| } |
| |
| /* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate */ |
| static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter) |
| { |
| struct phy_device *phydev = adapter->phydev; |
| |
| /* For version B silicon, we do not use the RxDMA timer for 10 and 100 |
| * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. |
| */ |
| if ((phydev->speed == SPEED_100) || (phydev->speed == SPEED_10)) { |
| writel(0, &adapter->regs->rxdma.max_pkt_time); |
| writel(1, &adapter->regs->rxdma.num_pkt_done); |
| } |
| } |
| |
| /* nic_return_rfd - Recycle a RFD and put it back onto the receive list */ |
| static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd) |
| { |
| struct rx_ring *rx_local = &adapter->rx_ring; |
| struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma; |
| u16 buff_index = rfd->bufferindex; |
| u8 ring_index = rfd->ringindex; |
| unsigned long flags; |
| struct fbr_lookup *fbr = rx_local->fbr[ring_index]; |
| |
| /* We don't use any of the OOB data besides status. Otherwise, we |
| * need to clean up OOB data |
| */ |
| if (buff_index < fbr->num_entries) { |
| u32 free_buff_ring; |
| u32 __iomem *offset; |
| struct fbr_desc *next; |
| |
| if (ring_index == 0) |
| offset = &rx_dma->fbr0_full_offset; |
| else |
| offset = &rx_dma->fbr1_full_offset; |
| |
| next = (struct fbr_desc *)(fbr->ring_virtaddr) + |
| INDEX10(fbr->local_full); |
| |
| /* Handle the Free Buffer Ring advancement here. Write |
| * the PA / Buffer Index for the returned buffer into |
| * the oldest (next to be freed)FBR entry |
| */ |
| next->addr_hi = fbr->bus_high[buff_index]; |
| next->addr_lo = fbr->bus_low[buff_index]; |
| next->word2 = buff_index; |
| |
| free_buff_ring = bump_free_buff_ring(&fbr->local_full, |
| fbr->num_entries - 1); |
| writel(free_buff_ring, offset); |
| } else { |
| dev_err(&adapter->pdev->dev, |
| "%s illegal Buffer Index returned\n", __func__); |
| } |
| |
| /* The processing on this RFD is done, so put it back on the tail of |
| * our list |
| */ |
| spin_lock_irqsave(&adapter->rcv_lock, flags); |
| list_add_tail(&rfd->list_node, &rx_local->recv_list); |
| rx_local->num_ready_recv++; |
| spin_unlock_irqrestore(&adapter->rcv_lock, flags); |
| |
| WARN_ON(rx_local->num_ready_recv > rx_local->num_rfd); |
| } |
| |
| /* nic_rx_pkts - Checks the hardware for available packets |
| * |
| * Checks the hardware for available packets, using completion ring |
| * If packets are available, it gets an RFD from the recv_list, attaches |
| * the packet to it, puts the RFD in the RecvPendList, and also returns |
| * the pointer to the RFD. |
| */ |
| static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter) |
| { |
| struct rx_ring *rx_local = &adapter->rx_ring; |
| struct rx_status_block *status; |
| struct pkt_stat_desc *psr; |
| struct rfd *rfd; |
| unsigned long flags; |
| struct list_head *element; |
| u8 ring_index; |
| u16 buff_index; |
| u32 len; |
| u32 word0; |
| u32 word1; |
| struct sk_buff *skb; |
| struct fbr_lookup *fbr; |
| |
| /* RX Status block is written by the DMA engine prior to every |
| * interrupt. It contains the next to be used entry in the Packet |
| * Status Ring, and also the two Free Buffer rings. |
| */ |
| status = rx_local->rx_status_block; |
| word1 = status->word1 >> 16; |
| |
| /* Check the PSR and wrap bits do not match */ |
| if ((word1 & 0x1FFF) == (rx_local->local_psr_full & 0x1FFF)) |
| return NULL; /* Looks like this ring is not updated yet */ |
| |
| /* The packet status ring indicates that data is available. */ |
| psr = (struct pkt_stat_desc *)(rx_local->ps_ring_virtaddr) + |
| (rx_local->local_psr_full & 0xFFF); |
| |
| /* Grab any information that is required once the PSR is advanced, |
| * since we can no longer rely on the memory being accurate |
| */ |
| len = psr->word1 & 0xFFFF; |
| ring_index = (psr->word1 >> 26) & 0x03; |
| fbr = rx_local->fbr[ring_index]; |
| buff_index = (psr->word1 >> 16) & 0x3FF; |
| word0 = psr->word0; |
| |
| /* Indicate that we have used this PSR entry. */ |
| /* FIXME wrap 12 */ |
| add_12bit(&rx_local->local_psr_full, 1); |
| if ((rx_local->local_psr_full & 0xFFF) > rx_local->psr_entries - 1) { |
| /* Clear psr full and toggle the wrap bit */ |
| rx_local->local_psr_full &= ~0xFFF; |
| rx_local->local_psr_full ^= 0x1000; |
| } |
| |
| writel(rx_local->local_psr_full, &adapter->regs->rxdma.psr_full_offset); |
| |
| if (ring_index > 1 || buff_index > fbr->num_entries - 1) { |
| /* Illegal buffer or ring index cannot be used by S/W*/ |
| dev_err(&adapter->pdev->dev, |
| "NICRxPkts PSR Entry %d indicates length of %d and/or bad bi(%d)\n", |
| rx_local->local_psr_full & 0xFFF, len, buff_index); |
| return NULL; |
| } |
| |
| /* Get and fill the RFD. */ |
| spin_lock_irqsave(&adapter->rcv_lock, flags); |
| |
| element = rx_local->recv_list.next; |
| rfd = list_entry(element, struct rfd, list_node); |
| |
| if (!rfd) { |
| spin_unlock_irqrestore(&adapter->rcv_lock, flags); |
| return NULL; |
| } |
| |
| list_del(&rfd->list_node); |
| rx_local->num_ready_recv--; |
| |
| spin_unlock_irqrestore(&adapter->rcv_lock, flags); |
| |
| rfd->bufferindex = buff_index; |
| rfd->ringindex = ring_index; |
| |
| /* In V1 silicon, there is a bug which screws up filtering of runt |
| * packets. Therefore runt packet filtering is disabled in the MAC and |
| * the packets are dropped here. They are also counted here. |
| */ |
| if (len < (NIC_MIN_PACKET_SIZE + 4)) { |
| adapter->stats.rx_other_errs++; |
| rfd->len = 0; |
| goto out; |
| } |
| |
| if ((word0 & ALCATEL_MULTICAST_PKT) && !(word0 & ALCATEL_BROADCAST_PKT)) |
| adapter->stats.multicast_pkts_rcvd++; |
| |
| rfd->len = len; |
| |
| skb = dev_alloc_skb(rfd->len + 2); |
| if (!skb) |
| return NULL; |
| |
| adapter->netdev->stats.rx_bytes += rfd->len; |
| |
| memcpy(skb_put(skb, rfd->len), fbr->virt[buff_index], rfd->len); |
| |
| skb->protocol = eth_type_trans(skb, adapter->netdev); |
| skb->ip_summed = CHECKSUM_NONE; |
| netif_receive_skb(skb); |
| |
| out: |
| nic_return_rfd(adapter, rfd); |
| return rfd; |
| } |
| |
| static int et131x_handle_recv_pkts(struct et131x_adapter *adapter, int budget) |
| { |
| struct rfd *rfd = NULL; |
| int count = 0; |
| int limit = budget; |
| bool done = true; |
| struct rx_ring *rx_ring = &adapter->rx_ring; |
| |
| if (budget > MAX_PACKETS_HANDLED) |
| limit = MAX_PACKETS_HANDLED; |
| |
| /* Process up to available RFD's */ |
| while (count < limit) { |
| if (list_empty(&rx_ring->recv_list)) { |
| WARN_ON(rx_ring->num_ready_recv != 0); |
| done = false; |
| break; |
| } |
| |
| rfd = nic_rx_pkts(adapter); |
| |
| if (rfd == NULL) |
| break; |
| |
| /* Do not receive any packets until a filter has been set. |
| * Do not receive any packets until we have link. |
| * If length is zero, return the RFD in order to advance the |
| * Free buffer ring. |
| */ |
| if (!adapter->packet_filter || |
| !netif_carrier_ok(adapter->netdev) || |
| rfd->len == 0) |
| continue; |
| |
| adapter->netdev->stats.rx_packets++; |
| |
| if (rx_ring->num_ready_recv < RFD_LOW_WATER_MARK) |
| dev_warn(&adapter->pdev->dev, "RFD's are running out\n"); |
| |
| count++; |
| } |
| |
| if (count == limit || !done) { |
| rx_ring->unfinished_receives = true; |
| writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, |
| &adapter->regs->global.watchdog_timer); |
| } else { |
| /* Watchdog timer will disable itself if appropriate. */ |
| rx_ring->unfinished_receives = false; |
| } |
| |
| return count; |
| } |
| |
| /* et131x_tx_dma_memory_alloc |
| * |
| * Allocates memory that will be visible both to the device and to the CPU. |
| * The OS will pass us packets, pointers to which we will insert in the Tx |
| * Descriptor queue. The device will read this queue to find the packets in |
| * memory. The device will update the "status" in memory each time it xmits a |
| * packet. |
| */ |
| static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) |
| { |
| int desc_size = 0; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| /* Allocate memory for the TCB's (Transmit Control Block) */ |
| tx_ring->tcb_ring = kcalloc(NUM_TCB, sizeof(struct tcb), |
| GFP_ATOMIC | GFP_DMA); |
| if (!tx_ring->tcb_ring) |
| return -ENOMEM; |
| |
| desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); |
| tx_ring->tx_desc_ring = dma_alloc_coherent(&adapter->pdev->dev, |
| desc_size, |
| &tx_ring->tx_desc_ring_pa, |
| GFP_KERNEL); |
| if (!tx_ring->tx_desc_ring) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Tx Ring\n"); |
| return -ENOMEM; |
| } |
| |
| tx_ring->tx_status = dma_alloc_coherent(&adapter->pdev->dev, |
| sizeof(u32), |
| &tx_ring->tx_status_pa, |
| GFP_KERNEL); |
| if (!tx_ring->tx_status_pa) { |
| dev_err(&adapter->pdev->dev, |
| "Cannot alloc memory for Tx status block\n"); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter) |
| { |
| int desc_size = 0; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| if (tx_ring->tx_desc_ring) { |
| /* Free memory relating to Tx rings here */ |
| desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX); |
| dma_free_coherent(&adapter->pdev->dev, |
| desc_size, |
| tx_ring->tx_desc_ring, |
| tx_ring->tx_desc_ring_pa); |
| tx_ring->tx_desc_ring = NULL; |
| } |
| |
| /* Free memory for the Tx status block */ |
| if (tx_ring->tx_status) { |
| dma_free_coherent(&adapter->pdev->dev, |
| sizeof(u32), |
| tx_ring->tx_status, |
| tx_ring->tx_status_pa); |
| |
| tx_ring->tx_status = NULL; |
| } |
| /* Free the memory for the tcb structures */ |
| kfree(tx_ring->tcb_ring); |
| } |
| |
| /* nic_send_packet - NIC specific send handler for version B silicon. */ |
| static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) |
| { |
| u32 i; |
| struct tx_desc desc[24]; |
| u32 frag = 0; |
| u32 thiscopy, remainder; |
| struct sk_buff *skb = tcb->skb; |
| u32 nr_frags = skb_shinfo(skb)->nr_frags + 1; |
| struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0]; |
| struct phy_device *phydev = adapter->phydev; |
| dma_addr_t dma_addr; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| /* Part of the optimizations of this send routine restrict us to |
| * sending 24 fragments at a pass. In practice we should never see |
| * more than 5 fragments. |
| */ |
| |
| /* nr_frags should be no more than 18. */ |
| BUILD_BUG_ON(MAX_SKB_FRAGS + 1 > 23); |
| |
| memset(desc, 0, sizeof(struct tx_desc) * (nr_frags + 1)); |
| |
| for (i = 0; i < nr_frags; i++) { |
| /* If there is something in this element, lets get a |
| * descriptor from the ring and get the necessary data |
| */ |
| if (i == 0) { |
| /* If the fragments are smaller than a standard MTU, |
| * then map them to a single descriptor in the Tx |
| * Desc ring. However, if they're larger, as is |
| * possible with support for jumbo packets, then |
| * split them each across 2 descriptors. |
| * |
| * This will work until we determine why the hardware |
| * doesn't seem to like large fragments. |
| */ |
| if (skb_headlen(skb) <= 1514) { |
| /* Low 16bits are length, high is vlan and |
| * unused currently so zero |
| */ |
| desc[frag].len_vlan = skb_headlen(skb); |
| dma_addr = dma_map_single(&adapter->pdev->dev, |
| skb->data, |
| skb_headlen(skb), |
| DMA_TO_DEVICE); |
| desc[frag].addr_lo = lower_32_bits(dma_addr); |
| desc[frag].addr_hi = upper_32_bits(dma_addr); |
| frag++; |
| } else { |
| desc[frag].len_vlan = skb_headlen(skb) / 2; |
| dma_addr = dma_map_single(&adapter->pdev->dev, |
| skb->data, |
| skb_headlen(skb) / 2, |
| DMA_TO_DEVICE); |
| desc[frag].addr_lo = lower_32_bits(dma_addr); |
| desc[frag].addr_hi = upper_32_bits(dma_addr); |
| frag++; |
| |
| desc[frag].len_vlan = skb_headlen(skb) / 2; |
| dma_addr = dma_map_single(&adapter->pdev->dev, |
| skb->data + |
| skb_headlen(skb) / 2, |
| skb_headlen(skb) / 2, |
| DMA_TO_DEVICE); |
| desc[frag].addr_lo = lower_32_bits(dma_addr); |
| desc[frag].addr_hi = upper_32_bits(dma_addr); |
| frag++; |
| } |
| } else { |
| desc[frag].len_vlan = frags[i - 1].size; |
| dma_addr = skb_frag_dma_map(&adapter->pdev->dev, |
| &frags[i - 1], |
| 0, |
| frags[i - 1].size, |
| DMA_TO_DEVICE); |
| desc[frag].addr_lo = lower_32_bits(dma_addr); |
| desc[frag].addr_hi = upper_32_bits(dma_addr); |
| frag++; |
| } |
| } |
| |
| if (phydev && phydev->speed == SPEED_1000) { |
| if (++tx_ring->since_irq == PARM_TX_NUM_BUFS_DEF) { |
| /* Last element & Interrupt flag */ |
| desc[frag - 1].flags = |
| TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; |
| tx_ring->since_irq = 0; |
| } else { /* Last element */ |
| desc[frag - 1].flags = TXDESC_FLAG_LASTPKT; |
| } |
| } else { |
| desc[frag - 1].flags = |
| TXDESC_FLAG_INTPROC | TXDESC_FLAG_LASTPKT; |
| } |
| |
| desc[0].flags |= TXDESC_FLAG_FIRSTPKT; |
| |
| tcb->index_start = tx_ring->send_idx; |
| tcb->stale = 0; |
| |
| thiscopy = NUM_DESC_PER_RING_TX - INDEX10(tx_ring->send_idx); |
| |
| if (thiscopy >= frag) { |
| remainder = 0; |
| thiscopy = frag; |
| } else { |
| remainder = frag - thiscopy; |
| } |
| |
| memcpy(tx_ring->tx_desc_ring + INDEX10(tx_ring->send_idx), |
| desc, |
| sizeof(struct tx_desc) * thiscopy); |
| |
| add_10bit(&tx_ring->send_idx, thiscopy); |
| |
| if (INDEX10(tx_ring->send_idx) == 0 || |
| INDEX10(tx_ring->send_idx) == NUM_DESC_PER_RING_TX) { |
| tx_ring->send_idx &= ~ET_DMA10_MASK; |
| tx_ring->send_idx ^= ET_DMA10_WRAP; |
| } |
| |
| if (remainder) { |
| memcpy(tx_ring->tx_desc_ring, |
| desc + thiscopy, |
| sizeof(struct tx_desc) * remainder); |
| |
| add_10bit(&tx_ring->send_idx, remainder); |
| } |
| |
| if (INDEX10(tx_ring->send_idx) == 0) { |
| if (tx_ring->send_idx) |
| tcb->index = NUM_DESC_PER_RING_TX - 1; |
| else |
| tcb->index = ET_DMA10_WRAP|(NUM_DESC_PER_RING_TX - 1); |
| } else { |
| tcb->index = tx_ring->send_idx - 1; |
| } |
| |
| spin_lock(&adapter->tcb_send_qlock); |
| |
| if (tx_ring->send_tail) |
| tx_ring->send_tail->next = tcb; |
| else |
| tx_ring->send_head = tcb; |
| |
| tx_ring->send_tail = tcb; |
| |
| WARN_ON(tcb->next != NULL); |
| |
| tx_ring->used++; |
| |
| spin_unlock(&adapter->tcb_send_qlock); |
| |
| /* Write the new write pointer back to the device. */ |
| writel(tx_ring->send_idx, &adapter->regs->txdma.service_request); |
| |
| /* For Gig only, we use Tx Interrupt coalescing. Enable the software |
| * timer to wake us up if this packet isn't followed by N more. |
| */ |
| if (phydev && phydev->speed == SPEED_1000) { |
| writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO, |
| &adapter->regs->global.watchdog_timer); |
| } |
| return 0; |
| } |
| |
| static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter) |
| { |
| int status; |
| struct tcb *tcb; |
| unsigned long flags; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| /* All packets must have at least a MAC address and a protocol type */ |
| if (skb->len < ETH_HLEN) |
| return -EIO; |
| |
| spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); |
| |
| tcb = tx_ring->tcb_qhead; |
| |
| if (tcb == NULL) { |
| spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); |
| return -ENOMEM; |
| } |
| |
| tx_ring->tcb_qhead = tcb->next; |
| |
| if (tx_ring->tcb_qhead == NULL) |
| tx_ring->tcb_qtail = NULL; |
| |
| spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); |
| |
| tcb->skb = skb; |
| tcb->next = NULL; |
| |
| status = nic_send_packet(adapter, tcb); |
| |
| if (status != 0) { |
| spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); |
| |
| if (tx_ring->tcb_qtail) |
| tx_ring->tcb_qtail->next = tcb; |
| else |
| /* Apparently ready Q is empty. */ |
| tx_ring->tcb_qhead = tcb; |
| |
| tx_ring->tcb_qtail = tcb; |
| spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); |
| return status; |
| } |
| WARN_ON(tx_ring->used > NUM_TCB); |
| return 0; |
| } |
| |
| /* free_send_packet - Recycle a struct tcb */ |
| static inline void free_send_packet(struct et131x_adapter *adapter, |
| struct tcb *tcb) |
| { |
| unsigned long flags; |
| struct tx_desc *desc = NULL; |
| struct net_device_stats *stats = &adapter->netdev->stats; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| u64 dma_addr; |
| |
| if (tcb->skb) { |
| stats->tx_bytes += tcb->skb->len; |
| |
| /* Iterate through the TX descriptors on the ring |
| * corresponding to this packet and umap the fragments |
| * they point to |
| */ |
| do { |
| desc = tx_ring->tx_desc_ring + |
| INDEX10(tcb->index_start); |
| |
| dma_addr = desc->addr_lo; |
| dma_addr |= (u64)desc->addr_hi << 32; |
| |
| dma_unmap_single(&adapter->pdev->dev, |
| dma_addr, |
| desc->len_vlan, DMA_TO_DEVICE); |
| |
| add_10bit(&tcb->index_start, 1); |
| if (INDEX10(tcb->index_start) >= |
| NUM_DESC_PER_RING_TX) { |
| tcb->index_start &= ~ET_DMA10_MASK; |
| tcb->index_start ^= ET_DMA10_WRAP; |
| } |
| } while (desc != tx_ring->tx_desc_ring + INDEX10(tcb->index)); |
| |
| dev_kfree_skb_any(tcb->skb); |
| } |
| |
| memset(tcb, 0, sizeof(struct tcb)); |
| |
| /* Add the TCB to the Ready Q */ |
| spin_lock_irqsave(&adapter->tcb_ready_qlock, flags); |
| |
| stats->tx_packets++; |
| |
| if (tx_ring->tcb_qtail) |
| tx_ring->tcb_qtail->next = tcb; |
| else /* Apparently ready Q is empty. */ |
| tx_ring->tcb_qhead = tcb; |
| |
| tx_ring->tcb_qtail = tcb; |
| |
| spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags); |
| WARN_ON(tx_ring->used < 0); |
| } |
| |
| /* et131x_free_busy_send_packets - Free and complete the stopped active sends */ |
| static void et131x_free_busy_send_packets(struct et131x_adapter *adapter) |
| { |
| struct tcb *tcb; |
| unsigned long flags; |
| u32 freed = 0; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| /* Any packets being sent? Check the first TCB on the send list */ |
| spin_lock_irqsave(&adapter->tcb_send_qlock, flags); |
| |
| tcb = tx_ring->send_head; |
| |
| while (tcb != NULL && freed < NUM_TCB) { |
| struct tcb *next = tcb->next; |
| |
| tx_ring->send_head = next; |
| |
| if (next == NULL) |
| tx_ring->send_tail = NULL; |
| |
| tx_ring->used--; |
| |
| spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); |
| |
| freed++; |
| free_send_packet(adapter, tcb); |
| |
| spin_lock_irqsave(&adapter->tcb_send_qlock, flags); |
| |
| tcb = tx_ring->send_head; |
| } |
| |
| WARN_ON(freed == NUM_TCB); |
| |
| spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); |
| |
| tx_ring->used = 0; |
| } |
| |
| /* et131x_handle_send_pkts |
| * |
| * Re-claim the send resources, complete sends and get more to send from |
| * the send wait queue. |
| */ |
| static void et131x_handle_send_pkts(struct et131x_adapter *adapter) |
| { |
| unsigned long flags; |
| u32 serviced; |
| struct tcb *tcb; |
| u32 index; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| serviced = readl(&adapter->regs->txdma.new_service_complete); |
| index = INDEX10(serviced); |
| |
| /* Has the ring wrapped? Process any descriptors that do not have |
| * the same "wrap" indicator as the current completion indicator |
| */ |
| spin_lock_irqsave(&adapter->tcb_send_qlock, flags); |
| |
| tcb = tx_ring->send_head; |
| |
| while (tcb && |
| ((serviced ^ tcb->index) & ET_DMA10_WRAP) && |
| index < INDEX10(tcb->index)) { |
| tx_ring->used--; |
| tx_ring->send_head = tcb->next; |
| if (tcb->next == NULL) |
| tx_ring->send_tail = NULL; |
| |
| spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); |
| free_send_packet(adapter, tcb); |
| spin_lock_irqsave(&adapter->tcb_send_qlock, flags); |
| |
| /* Goto the next packet */ |
| tcb = tx_ring->send_head; |
| } |
| while (tcb && |
| !((serviced ^ tcb->index) & ET_DMA10_WRAP) && |
| index > (tcb->index & ET_DMA10_MASK)) { |
| tx_ring->used--; |
| tx_ring->send_head = tcb->next; |
| if (tcb->next == NULL) |
| tx_ring->send_tail = NULL; |
| |
| spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); |
| free_send_packet(adapter, tcb); |
| spin_lock_irqsave(&adapter->tcb_send_qlock, flags); |
| |
| /* Goto the next packet */ |
| tcb = tx_ring->send_head; |
| } |
| |
| /* Wake up the queue when we hit a low-water mark */ |
| if (tx_ring->used <= NUM_TCB / 3) |
| netif_wake_queue(adapter->netdev); |
| |
| spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); |
| } |
| |
| static int et131x_get_settings(struct net_device *netdev, |
| struct ethtool_cmd *cmd) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| return phy_ethtool_gset(adapter->phydev, cmd); |
| } |
| |
| static int et131x_set_settings(struct net_device *netdev, |
| struct ethtool_cmd *cmd) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| return phy_ethtool_sset(adapter->phydev, cmd); |
| } |
| |
| static int et131x_get_regs_len(struct net_device *netdev) |
| { |
| #define ET131X_REGS_LEN 256 |
| return ET131X_REGS_LEN * sizeof(u32); |
| } |
| |
| static void et131x_get_regs(struct net_device *netdev, |
| struct ethtool_regs *regs, void *regs_data) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct address_map __iomem *aregs = adapter->regs; |
| u32 *regs_buff = regs_data; |
| u32 num = 0; |
| u16 tmp; |
| |
| memset(regs_data, 0, et131x_get_regs_len(netdev)); |
| |
| regs->version = (1 << 24) | (adapter->pdev->revision << 16) | |
| adapter->pdev->device; |
| |
| /* PHY regs */ |
| et131x_mii_read(adapter, MII_BMCR, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_BMSR, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_PHYSID1, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_PHYSID2, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_ADVERTISE, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_LPA, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_EXPANSION, &tmp); |
| regs_buff[num++] = tmp; |
| /* Autoneg next page transmit reg */ |
| et131x_mii_read(adapter, 0x07, &tmp); |
| regs_buff[num++] = tmp; |
| /* Link partner next page reg */ |
| et131x_mii_read(adapter, 0x08, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_CTRL1000, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_STAT1000, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, 0x0b, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, 0x0c, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_MMD_CTRL, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_MMD_DATA, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, MII_ESTATUS, &tmp); |
| regs_buff[num++] = tmp; |
| |
| et131x_mii_read(adapter, PHY_INDEX_REG, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_DATA_REG, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL + 1, &tmp); |
| regs_buff[num++] = tmp; |
| |
| et131x_mii_read(adapter, PHY_REGISTER_MGMT_CONTROL, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_CONFIG, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_PHY_CONTROL, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_INTERRUPT_MASK, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_INTERRUPT_STATUS, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_PHY_STATUS, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_LED_1, &tmp); |
| regs_buff[num++] = tmp; |
| et131x_mii_read(adapter, PHY_LED_2, &tmp); |
| regs_buff[num++] = tmp; |
| |
| /* Global regs */ |
| regs_buff[num++] = readl(&aregs->global.txq_start_addr); |
| regs_buff[num++] = readl(&aregs->global.txq_end_addr); |
| regs_buff[num++] = readl(&aregs->global.rxq_start_addr); |
| regs_buff[num++] = readl(&aregs->global.rxq_end_addr); |
| regs_buff[num++] = readl(&aregs->global.pm_csr); |
| regs_buff[num++] = adapter->stats.interrupt_status; |
| regs_buff[num++] = readl(&aregs->global.int_mask); |
| regs_buff[num++] = readl(&aregs->global.int_alias_clr_en); |
| regs_buff[num++] = readl(&aregs->global.int_status_alias); |
| regs_buff[num++] = readl(&aregs->global.sw_reset); |
| regs_buff[num++] = readl(&aregs->global.slv_timer); |
| regs_buff[num++] = readl(&aregs->global.msi_config); |
| regs_buff[num++] = readl(&aregs->global.loopback); |
| regs_buff[num++] = readl(&aregs->global.watchdog_timer); |
| |
| /* TXDMA regs */ |
| regs_buff[num++] = readl(&aregs->txdma.csr); |
| regs_buff[num++] = readl(&aregs->txdma.pr_base_hi); |
| regs_buff[num++] = readl(&aregs->txdma.pr_base_lo); |
| regs_buff[num++] = readl(&aregs->txdma.pr_num_des); |
| regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr); |
| regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr_ext); |
| regs_buff[num++] = readl(&aregs->txdma.txq_rd_addr); |
| regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_hi); |
| regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_lo); |
| regs_buff[num++] = readl(&aregs->txdma.service_request); |
| regs_buff[num++] = readl(&aregs->txdma.service_complete); |
| regs_buff[num++] = readl(&aregs->txdma.cache_rd_index); |
| regs_buff[num++] = readl(&aregs->txdma.cache_wr_index); |
| regs_buff[num++] = readl(&aregs->txdma.tx_dma_error); |
| regs_buff[num++] = readl(&aregs->txdma.desc_abort_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.payload_abort_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.writeback_abort_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.desc_timeout_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.payload_timeout_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.writeback_timeout_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.desc_error_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.payload_error_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.writeback_error_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.dropped_tlp_cnt); |
| regs_buff[num++] = readl(&aregs->txdma.new_service_complete); |
| regs_buff[num++] = readl(&aregs->txdma.ethernet_packet_cnt); |
| |
| /* RXDMA regs */ |
| regs_buff[num++] = readl(&aregs->rxdma.csr); |
| regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_hi); |
| regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_lo); |
| regs_buff[num++] = readl(&aregs->rxdma.num_pkt_done); |
| regs_buff[num++] = readl(&aregs->rxdma.max_pkt_time); |
| regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr); |
| regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr_ext); |
| regs_buff[num++] = readl(&aregs->rxdma.rxq_wr_addr); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_base_hi); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_base_lo); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_num_des); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_avail_offset); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_full_offset); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_access_index); |
| regs_buff[num++] = readl(&aregs->rxdma.psr_min_des); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_lo); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_hi); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_num_des); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_avail_offset); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_full_offset); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_rd_index); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr0_min_des); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_lo); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_hi); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_num_des); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_avail_offset); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_full_offset); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_rd_index); |
| regs_buff[num++] = readl(&aregs->rxdma.fbr1_min_des); |
| } |
| |
| static void et131x_get_drvinfo(struct net_device *netdev, |
| struct ethtool_drvinfo *info) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| strlcpy(info->driver, DRIVER_NAME, sizeof(info->driver)); |
| strlcpy(info->version, DRIVER_VERSION, sizeof(info->version)); |
| strlcpy(info->bus_info, pci_name(adapter->pdev), |
| sizeof(info->bus_info)); |
| } |
| |
| static struct ethtool_ops et131x_ethtool_ops = { |
| .get_settings = et131x_get_settings, |
| .set_settings = et131x_set_settings, |
| .get_drvinfo = et131x_get_drvinfo, |
| .get_regs_len = et131x_get_regs_len, |
| .get_regs = et131x_get_regs, |
| .get_link = ethtool_op_get_link, |
| }; |
| |
| /* et131x_hwaddr_init - set up the MAC Address */ |
| static void et131x_hwaddr_init(struct et131x_adapter *adapter) |
| { |
| /* If have our default mac from init and no mac address from |
| * EEPROM then we need to generate the last octet and set it on the |
| * device |
| */ |
| if (is_zero_ether_addr(adapter->rom_addr)) { |
| /* We need to randomly generate the last octet so we |
| * decrease our chances of setting the mac address to |
| * same as another one of our cards in the system |
| */ |
| get_random_bytes(&adapter->addr[5], 1); |
| /* We have the default value in the register we are |
| * working with so we need to copy the current |
| * address into the permanent address |
| */ |
| ether_addr_copy(adapter->rom_addr, adapter->addr); |
| } else { |
| /* We do not have an override address, so set the |
| * current address to the permanent address and add |
| * it to the device |
| */ |
| ether_addr_copy(adapter->addr, adapter->rom_addr); |
| } |
| } |
| |
| static int et131x_pci_init(struct et131x_adapter *adapter, |
| struct pci_dev *pdev) |
| { |
| u16 max_payload; |
| int i, rc; |
| |
| rc = et131x_init_eeprom(adapter); |
| if (rc < 0) |
| goto out; |
| |
| if (!pci_is_pcie(pdev)) { |
| dev_err(&pdev->dev, "Missing PCIe capabilities\n"); |
| goto err_out; |
| } |
| |
| /* Program the Ack/Nak latency and replay timers */ |
| max_payload = pdev->pcie_mpss; |
| |
| if (max_payload < 2) { |
| static const u16 acknak[2] = { 0x76, 0xD0 }; |
| static const u16 replay[2] = { 0x1E0, 0x2ED }; |
| |
| if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK, |
| acknak[max_payload])) { |
| dev_err(&pdev->dev, |
| "Could not write PCI config space for ACK/NAK\n"); |
| goto err_out; |
| } |
| if (pci_write_config_word(pdev, ET1310_PCI_REPLAY, |
| replay[max_payload])) { |
| dev_err(&pdev->dev, |
| "Could not write PCI config space for Replay Timer\n"); |
| goto err_out; |
| } |
| } |
| |
| /* l0s and l1 latency timers. We are using default values. |
| * Representing 001 for L0s and 010 for L1 |
| */ |
| if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) { |
| dev_err(&pdev->dev, |
| "Could not write PCI config space for Latency Timers\n"); |
| goto err_out; |
| } |
| |
| /* Change the max read size to 2k */ |
| if (pcie_set_readrq(pdev, 2048)) { |
| dev_err(&pdev->dev, |
| "Couldn't change PCI config space for Max read size\n"); |
| goto err_out; |
| } |
| |
| /* Get MAC address from config space if an eeprom exists, otherwise |
| * the MAC address there will not be valid |
| */ |
| if (!adapter->has_eeprom) { |
| et131x_hwaddr_init(adapter); |
| return 0; |
| } |
| |
| for (i = 0; i < ETH_ALEN; i++) { |
| if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i, |
| adapter->rom_addr + i)) { |
| dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n"); |
| goto err_out; |
| } |
| } |
| ether_addr_copy(adapter->addr, adapter->rom_addr); |
| out: |
| return rc; |
| err_out: |
| rc = -EIO; |
| goto out; |
| } |
| |
| /* et131x_error_timer_handler |
| * @data: timer-specific variable; here a pointer to our adapter structure |
| * |
| * The routine called when the error timer expires, to track the number of |
| * recurring errors. |
| */ |
| static void et131x_error_timer_handler(unsigned long data) |
| { |
| struct et131x_adapter *adapter = (struct et131x_adapter *)data; |
| struct phy_device *phydev = adapter->phydev; |
| |
| if (et1310_in_phy_coma(adapter)) { |
| /* Bring the device immediately out of coma, to |
| * prevent it from sleeping indefinitely, this |
| * mechanism could be improved! |
| */ |
| et1310_disable_phy_coma(adapter); |
| adapter->boot_coma = 20; |
| } else { |
| et1310_update_macstat_host_counters(adapter); |
| } |
| |
| if (!phydev->link && adapter->boot_coma < 11) |
| adapter->boot_coma++; |
| |
| if (adapter->boot_coma == 10) { |
| if (!phydev->link) { |
| if (!et1310_in_phy_coma(adapter)) { |
| /* NOTE - This was originally a 'sync with |
| * interrupt'. How to do that under Linux? |
| */ |
| et131x_enable_interrupts(adapter); |
| et1310_enable_phy_coma(adapter); |
| } |
| } |
| } |
| |
| /* This is a periodic timer, so reschedule */ |
| mod_timer(&adapter->error_timer, jiffies + |
| msecs_to_jiffies(TX_ERROR_PERIOD)); |
| } |
| |
| static void et131x_adapter_memory_free(struct et131x_adapter *adapter) |
| { |
| et131x_tx_dma_memory_free(adapter); |
| et131x_rx_dma_memory_free(adapter); |
| } |
| |
| static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) |
| { |
| int status; |
| |
| status = et131x_tx_dma_memory_alloc(adapter); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "et131x_tx_dma_memory_alloc FAILED\n"); |
| et131x_tx_dma_memory_free(adapter); |
| return status; |
| } |
| |
| status = et131x_rx_dma_memory_alloc(adapter); |
| if (status) { |
| dev_err(&adapter->pdev->dev, |
| "et131x_rx_dma_memory_alloc FAILED\n"); |
| et131x_adapter_memory_free(adapter); |
| return status; |
| } |
| |
| status = et131x_init_recv(adapter); |
| if (status) { |
| dev_err(&adapter->pdev->dev, "et131x_init_recv FAILED\n"); |
| et131x_adapter_memory_free(adapter); |
| } |
| return status; |
| } |
| |
| static void et131x_adjust_link(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct phy_device *phydev = adapter->phydev; |
| |
| if (!phydev) |
| return; |
| if (phydev->link == adapter->link) |
| return; |
| |
| /* Check to see if we are in coma mode and if |
| * so, disable it because we will not be able |
| * to read PHY values until we are out. |
| */ |
| if (et1310_in_phy_coma(adapter)) |
| et1310_disable_phy_coma(adapter); |
| |
| adapter->link = phydev->link; |
| phy_print_status(phydev); |
| |
| if (phydev->link) { |
| adapter->boot_coma = 20; |
| if (phydev->speed == SPEED_10) { |
| u16 register18; |
| |
| et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, |
| ®ister18); |
| et131x_mii_write(adapter, phydev->addr, |
| PHY_MPHY_CONTROL_REG, |
| register18 | 0x4); |
| et131x_mii_write(adapter, phydev->addr, PHY_INDEX_REG, |
| register18 | 0x8402); |
| et131x_mii_write(adapter, phydev->addr, PHY_DATA_REG, |
| register18 | 511); |
| et131x_mii_write(adapter, phydev->addr, |
| PHY_MPHY_CONTROL_REG, register18); |
| } |
| |
| et1310_config_flow_control(adapter); |
| |
| if (phydev->speed == SPEED_1000 && |
| adapter->registry_jumbo_packet > 2048) { |
| u16 reg; |
| |
| et131x_mii_read(adapter, PHY_CONFIG, ®); |
| reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH; |
| reg |= ET_PHY_CONFIG_FIFO_DEPTH_32; |
| et131x_mii_write(adapter, phydev->addr, PHY_CONFIG, |
| reg); |
| } |
| |
| et131x_set_rx_dma_timer(adapter); |
| et1310_config_mac_regs2(adapter); |
| } else { |
| adapter->boot_coma = 0; |
| |
| if (phydev->speed == SPEED_10) { |
| u16 register18; |
| |
| et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG, |
| ®ister18); |
| et131x_mii_write(adapter, phydev->addr, |
| PHY_MPHY_CONTROL_REG, |
| register18 | 0x4); |
| et131x_mii_write(adapter, phydev->addr, |
| PHY_INDEX_REG, register18 | 0x8402); |
| et131x_mii_write(adapter, phydev->addr, |
| PHY_DATA_REG, register18 | 511); |
| et131x_mii_write(adapter, phydev->addr, |
| PHY_MPHY_CONTROL_REG, register18); |
| } |
| |
| et131x_free_busy_send_packets(adapter); |
| et131x_init_send(adapter); |
| |
| /* Bring the device back to the state it was during |
| * init prior to autonegotiation being complete. This |
| * way, when we get the auto-neg complete interrupt, |
| * we can complete init by calling config_mac_regs2. |
| */ |
| et131x_soft_reset(adapter); |
| |
| et131x_adapter_setup(adapter); |
| |
| et131x_disable_txrx(netdev); |
| et131x_enable_txrx(netdev); |
| } |
| } |
| |
| static int et131x_mii_probe(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct phy_device *phydev = NULL; |
| |
| phydev = phy_find_first(adapter->mii_bus); |
| if (!phydev) { |
| dev_err(&adapter->pdev->dev, "no PHY found\n"); |
| return -ENODEV; |
| } |
| |
| phydev = phy_connect(netdev, phydev_name(phydev), |
| &et131x_adjust_link, PHY_INTERFACE_MODE_MII); |
| |
| if (IS_ERR(phydev)) { |
| dev_err(&adapter->pdev->dev, "Could not attach to PHY\n"); |
| return PTR_ERR(phydev); |
| } |
| |
| phydev->supported &= (SUPPORTED_10baseT_Half | |
| SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | |
| SUPPORTED_100baseT_Full | |
| SUPPORTED_Autoneg | |
| SUPPORTED_MII | |
| SUPPORTED_TP); |
| |
| if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST) |
| phydev->supported |= SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full; |
| |
| phydev->advertising = phydev->supported; |
| phydev->autoneg = AUTONEG_ENABLE; |
| adapter->phydev = phydev; |
| |
| phy_attached_info(phydev); |
| |
| return 0; |
| } |
| |
| static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev, |
| struct pci_dev *pdev) |
| { |
| static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 }; |
| |
| struct et131x_adapter *adapter; |
| |
| adapter = netdev_priv(netdev); |
| adapter->pdev = pci_dev_get(pdev); |
| adapter->netdev = netdev; |
| |
| spin_lock_init(&adapter->tcb_send_qlock); |
| spin_lock_init(&adapter->tcb_ready_qlock); |
| spin_lock_init(&adapter->rcv_lock); |
| |
| adapter->registry_jumbo_packet = 1514; /* 1514-9216 */ |
| |
| ether_addr_copy(adapter->addr, default_mac); |
| |
| return adapter; |
| } |
| |
| static void et131x_pci_remove(struct pci_dev *pdev) |
| { |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| unregister_netdev(netdev); |
| netif_napi_del(&adapter->napi); |
| phy_disconnect(adapter->phydev); |
| mdiobus_unregister(adapter->mii_bus); |
| mdiobus_free(adapter->mii_bus); |
| |
| et131x_adapter_memory_free(adapter); |
| iounmap(adapter->regs); |
| pci_dev_put(pdev); |
| |
| free_netdev(netdev); |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| static void et131x_up(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| et131x_enable_txrx(netdev); |
| phy_start(adapter->phydev); |
| } |
| |
| static void et131x_down(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| /* Save the timestamp for the TX watchdog, prevent a timeout */ |
| netdev->trans_start = jiffies; |
| |
| phy_stop(adapter->phydev); |
| et131x_disable_txrx(netdev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int et131x_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| |
| if (netif_running(netdev)) { |
| netif_device_detach(netdev); |
| et131x_down(netdev); |
| pci_save_state(pdev); |
| } |
| |
| return 0; |
| } |
| |
| static int et131x_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct net_device *netdev = pci_get_drvdata(pdev); |
| |
| if (netif_running(netdev)) { |
| pci_restore_state(pdev); |
| et131x_up(netdev); |
| netif_device_attach(netdev); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume); |
| |
| static irqreturn_t et131x_isr(int irq, void *dev_id) |
| { |
| bool handled = true; |
| bool enable_interrupts = true; |
| struct net_device *netdev = dev_id; |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct address_map __iomem *iomem = adapter->regs; |
| struct rx_ring *rx_ring = &adapter->rx_ring; |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| u32 status; |
| |
| if (!netif_device_present(netdev)) { |
| handled = false; |
| enable_interrupts = false; |
| goto out; |
| } |
| |
| et131x_disable_interrupts(adapter); |
| |
| status = readl(&adapter->regs->global.int_status); |
| |
| if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) |
| status &= ~INT_MASK_ENABLE; |
| else |
| status &= ~INT_MASK_ENABLE_NO_FLOW; |
| |
| /* Make sure this is our interrupt */ |
| if (!status) { |
| handled = false; |
| et131x_enable_interrupts(adapter); |
| goto out; |
| } |
| |
| /* This is our interrupt, so process accordingly */ |
| if (status & ET_INTR_WATCHDOG) { |
| struct tcb *tcb = tx_ring->send_head; |
| |
| if (tcb) |
| if (++tcb->stale > 1) |
| status |= ET_INTR_TXDMA_ISR; |
| |
| if (rx_ring->unfinished_receives) |
| status |= ET_INTR_RXDMA_XFR_DONE; |
| else if (tcb == NULL) |
| writel(0, &adapter->regs->global.watchdog_timer); |
| |
| status &= ~ET_INTR_WATCHDOG; |
| } |
| |
| if (status & (ET_INTR_RXDMA_XFR_DONE | ET_INTR_TXDMA_ISR)) { |
| enable_interrupts = false; |
| napi_schedule(&adapter->napi); |
| } |
| |
| status &= ~(ET_INTR_TXDMA_ISR | ET_INTR_RXDMA_XFR_DONE); |
| |
| if (!status) |
| goto out; |
| |
| if (status & ET_INTR_TXDMA_ERR) { |
| /* Following read also clears the register (COR) */ |
| u32 txdma_err = readl(&iomem->txdma.tx_dma_error); |
| |
| dev_warn(&adapter->pdev->dev, |
| "TXDMA_ERR interrupt, error = %d\n", |
| txdma_err); |
| } |
| |
| if (status & (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) { |
| /* This indicates the number of unused buffers in RXDMA free |
| * buffer ring 0 is <= the limit you programmed. Free buffer |
| * resources need to be returned. Free buffers are consumed as |
| * packets are passed from the network to the host. The host |
| * becomes aware of the packets from the contents of the packet |
| * status ring. This ring is queried when the packet done |
| * interrupt occurs. Packets are then passed to the OS. When |
| * the OS is done with the packets the resources can be |
| * returned to the ET1310 for re-use. This interrupt is one |
| * method of returning resources. |
| */ |
| |
| /* If the user has flow control on, then we will |
| * send a pause packet, otherwise just exit |
| */ |
| if (adapter->flow == FLOW_TXONLY || adapter->flow == FLOW_BOTH) { |
| u32 pm_csr; |
| |
| /* Tell the device to send a pause packet via the back |
| * pressure register (bp req and bp xon/xoff) |
| */ |
| pm_csr = readl(&iomem->global.pm_csr); |
| if (!et1310_in_phy_coma(adapter)) |
| writel(3, &iomem->txmac.bp_ctrl); |
| } |
| } |
| |
| /* Handle Packet Status Ring Low Interrupt */ |
| if (status & ET_INTR_RXDMA_STAT_LOW) { |
| /* Same idea as with the two Free Buffer Rings. Packets going |
| * from the network to the host each consume a free buffer |
| * resource and a packet status resource. These resources are |
| * passed to the OS. When the OS is done with the resources, |
| * they need to be returned to the ET1310. This is one method |
| * of returning the resources. |
| */ |
| } |
| |
| if (status & ET_INTR_RXDMA_ERR) { |
| /* The rxdma_error interrupt is sent when a time-out on a |
| * request issued by the JAGCore has occurred or a completion is |
| * returned with an un-successful status. In both cases the |
| * request is considered complete. The JAGCore will |
| * automatically re-try the request in question. Normally |
| * information on events like these are sent to the host using |
| * the "Advanced Error Reporting" capability. This interrupt is |
| * another way of getting similar information. The only thing |
| * required is to clear the interrupt by reading the ISR in the |
| * global resources. The JAGCore will do a re-try on the |
| * request. Normally you should never see this interrupt. If |
| * you start to see this interrupt occurring frequently then |
| * something bad has occurred. A reset might be the thing to do. |
| */ |
| /* TRAP();*/ |
| |
| dev_warn(&adapter->pdev->dev, "RxDMA_ERR interrupt, error %x\n", |
| readl(&iomem->txmac.tx_test)); |
| } |
| |
| /* Handle the Wake on LAN Event */ |
| if (status & ET_INTR_WOL) { |
| /* This is a secondary interrupt for wake on LAN. The driver |
| * should never see this, if it does, something serious is |
| * wrong. |
| */ |
| dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n"); |
| } |
| |
| if (status & ET_INTR_TXMAC) { |
| u32 err = readl(&iomem->txmac.err); |
| |
| /* When any of the errors occur and TXMAC generates an |
| * interrupt to report these errors, it usually means that |
| * TXMAC has detected an error in the data stream retrieved |
| * from the on-chip Tx Q. All of these errors are catastrophic |
| * and TXMAC won't be able to recover data when these errors |
| * occur. In a nutshell, the whole Tx path will have to be reset |
| * and re-configured afterwards. |
| */ |
| dev_warn(&adapter->pdev->dev, "TXMAC interrupt, error 0x%08x\n", |
| err); |
| |
| /* If we are debugging, we want to see this error, otherwise we |
| * just want the device to be reset and continue |
| */ |
| } |
| |
| if (status & ET_INTR_RXMAC) { |
| /* These interrupts are catastrophic to the device, what we need |
| * to do is disable the interrupts and set the flag to cause us |
| * to reset so we can solve this issue. |
| */ |
| dev_warn(&adapter->pdev->dev, |
| "RXMAC interrupt, error 0x%08x. Requesting reset\n", |
| readl(&iomem->rxmac.err_reg)); |
| |
| dev_warn(&adapter->pdev->dev, |
| "Enable 0x%08x, Diag 0x%08x\n", |
| readl(&iomem->rxmac.ctrl), |
| readl(&iomem->rxmac.rxq_diag)); |
| |
| /* If we are debugging, we want to see this error, otherwise we |
| * just want the device to be reset and continue |
| */ |
| } |
| |
| if (status & ET_INTR_MAC_STAT) { |
| /* This means at least one of the un-masked counters in the |
| * MAC_STAT block has rolled over. Use this to maintain the top, |
| * software managed bits of the counter(s). |
| */ |
| et1310_handle_macstat_interrupt(adapter); |
| } |
| |
| if (status & ET_INTR_SLV_TIMEOUT) { |
| /* This means a timeout has occurred on a read or write request |
| * to one of the JAGCore registers. The Global Resources block |
| * has terminated the request and on a read request, returned a |
| * "fake" value. The most likely reasons are: Bad Address or the |
| * addressed module is in a power-down state and can't respond. |
| */ |
| } |
| |
| out: |
| if (enable_interrupts) |
| et131x_enable_interrupts(adapter); |
| |
| return IRQ_RETVAL(handled); |
| } |
| |
| static int et131x_poll(struct napi_struct *napi, int budget) |
| { |
| struct et131x_adapter *adapter = |
| container_of(napi, struct et131x_adapter, napi); |
| int work_done = et131x_handle_recv_pkts(adapter, budget); |
| |
| et131x_handle_send_pkts(adapter); |
| |
| if (work_done < budget) { |
| napi_complete(&adapter->napi); |
| et131x_enable_interrupts(adapter); |
| } |
| |
| return work_done; |
| } |
| |
| /* et131x_stats - Return the current device statistics */ |
| static struct net_device_stats *et131x_stats(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct net_device_stats *stats = &adapter->netdev->stats; |
| struct ce_stats *devstat = &adapter->stats; |
| |
| stats->rx_errors = devstat->rx_length_errs + |
| devstat->rx_align_errs + |
| devstat->rx_crc_errs + |
| devstat->rx_code_violations + |
| devstat->rx_other_errs; |
| stats->tx_errors = devstat->tx_max_pkt_errs; |
| stats->multicast = devstat->multicast_pkts_rcvd; |
| stats->collisions = devstat->tx_collisions; |
| |
| stats->rx_length_errors = devstat->rx_length_errs; |
| stats->rx_over_errors = devstat->rx_overflows; |
| stats->rx_crc_errors = devstat->rx_crc_errs; |
| stats->rx_dropped = devstat->rcvd_pkts_dropped; |
| |
| /* NOTE: Not used, can't find analogous statistics */ |
| /* stats->rx_frame_errors = devstat->; */ |
| /* stats->rx_fifo_errors = devstat->; */ |
| /* stats->rx_missed_errors = devstat->; */ |
| |
| /* stats->tx_aborted_errors = devstat->; */ |
| /* stats->tx_carrier_errors = devstat->; */ |
| /* stats->tx_fifo_errors = devstat->; */ |
| /* stats->tx_heartbeat_errors = devstat->; */ |
| /* stats->tx_window_errors = devstat->; */ |
| return stats; |
| } |
| |
| static int et131x_open(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned int irq = pdev->irq; |
| int result; |
| |
| /* Start the timer to track NIC errors */ |
| init_timer(&adapter->error_timer); |
| adapter->error_timer.expires = jiffies + |
| msecs_to_jiffies(TX_ERROR_PERIOD); |
| adapter->error_timer.function = et131x_error_timer_handler; |
| adapter->error_timer.data = (unsigned long)adapter; |
| add_timer(&adapter->error_timer); |
| |
| result = request_irq(irq, et131x_isr, |
| IRQF_SHARED, netdev->name, netdev); |
| if (result) { |
| dev_err(&pdev->dev, "could not register IRQ %d\n", irq); |
| return result; |
| } |
| |
| adapter->flags |= FMP_ADAPTER_INTERRUPT_IN_USE; |
| |
| napi_enable(&adapter->napi); |
| |
| et131x_up(netdev); |
| |
| return result; |
| } |
| |
| static int et131x_close(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| et131x_down(netdev); |
| napi_disable(&adapter->napi); |
| |
| adapter->flags &= ~FMP_ADAPTER_INTERRUPT_IN_USE; |
| free_irq(adapter->pdev->irq, netdev); |
| |
| /* Stop the error timer */ |
| return del_timer_sync(&adapter->error_timer); |
| } |
| |
| static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, |
| int cmd) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| if (!adapter->phydev) |
| return -EINVAL; |
| |
| return phy_mii_ioctl(adapter->phydev, reqbuf, cmd); |
| } |
| |
| /* et131x_set_packet_filter - Configures the Rx Packet filtering */ |
| static int et131x_set_packet_filter(struct et131x_adapter *adapter) |
| { |
| int filter = adapter->packet_filter; |
| u32 ctrl; |
| u32 pf_ctrl; |
| |
| ctrl = readl(&adapter->regs->rxmac.ctrl); |
| pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl); |
| |
| /* Default to disabled packet filtering */ |
| ctrl |= 0x04; |
| |
| /* Set us to be in promiscuous mode so we receive everything, this |
| * is also true when we get a packet filter of 0 |
| */ |
| if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0) |
| pf_ctrl &= ~7; /* Clear filter bits */ |
| else { |
| /* Set us up with Multicast packet filtering. Three cases are |
| * possible - (1) we have a multi-cast list, (2) we receive ALL |
| * multicast entries or (3) we receive none. |
| */ |
| if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST) |
| pf_ctrl &= ~2; /* Multicast filter bit */ |
| else { |
| et1310_setup_device_for_multicast(adapter); |
| pf_ctrl |= 2; |
| ctrl &= ~0x04; |
| } |
| |
| /* Set us up with Unicast packet filtering */ |
| if (filter & ET131X_PACKET_TYPE_DIRECTED) { |
| et1310_setup_device_for_unicast(adapter); |
| pf_ctrl |= 4; |
| ctrl &= ~0x04; |
| } |
| |
| /* Set us up with Broadcast packet filtering */ |
| if (filter & ET131X_PACKET_TYPE_BROADCAST) { |
| pf_ctrl |= 1; /* Broadcast filter bit */ |
| ctrl &= ~0x04; |
| } else { |
| pf_ctrl &= ~1; |
| } |
| |
| /* Setup the receive mac configuration registers - Packet |
| * Filter control + the enable / disable for packet filter |
| * in the control reg. |
| */ |
| writel(pf_ctrl, &adapter->regs->rxmac.pf_ctrl); |
| writel(ctrl, &adapter->regs->rxmac.ctrl); |
| } |
| return 0; |
| } |
| |
| static void et131x_multicast(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| int packet_filter; |
| struct netdev_hw_addr *ha; |
| int i; |
| |
| /* Before we modify the platform-independent filter flags, store them |
| * locally. This allows us to determine if anything's changed and if |
| * we even need to bother the hardware |
| */ |
| packet_filter = adapter->packet_filter; |
| |
| /* Clear the 'multicast' flag locally; because we only have a single |
| * flag to check multicast, and multiple multicast addresses can be |
| * set, this is the easiest way to determine if more than one |
| * multicast address is being set. |
| */ |
| packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST; |
| |
| /* Check the net_device flags and set the device independent flags |
| * accordingly |
| */ |
| if (netdev->flags & IFF_PROMISC) |
| adapter->packet_filter |= ET131X_PACKET_TYPE_PROMISCUOUS; |
| else |
| adapter->packet_filter &= ~ET131X_PACKET_TYPE_PROMISCUOUS; |
| |
| if ((netdev->flags & IFF_ALLMULTI) || |
| (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST)) |
| adapter->packet_filter |= ET131X_PACKET_TYPE_ALL_MULTICAST; |
| |
| if (netdev_mc_count(netdev) < 1) { |
| adapter->packet_filter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST; |
| adapter->packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST; |
| } else { |
| adapter->packet_filter |= ET131X_PACKET_TYPE_MULTICAST; |
| } |
| |
| /* Set values in the private adapter struct */ |
| i = 0; |
| netdev_for_each_mc_addr(ha, netdev) { |
| if (i == NIC_MAX_MCAST_LIST) |
| break; |
| ether_addr_copy(adapter->multicast_list[i++], ha->addr); |
| } |
| adapter->multicast_addr_count = i; |
| |
| /* Are the new flags different from the previous ones? If not, then no |
| * action is required |
| * |
| * NOTE - This block will always update the multicast_list with the |
| * hardware, even if the addresses aren't the same. |
| */ |
| if (packet_filter != adapter->packet_filter) |
| et131x_set_packet_filter(adapter); |
| } |
| |
| static netdev_tx_t et131x_tx(struct sk_buff *skb, struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| |
| /* stop the queue if it's getting full */ |
| if (tx_ring->used >= NUM_TCB - 1 && !netif_queue_stopped(netdev)) |
| netif_stop_queue(netdev); |
| |
| /* Save the timestamp for the TX timeout watchdog */ |
| netdev->trans_start = jiffies; |
| |
| /* TCB is not available */ |
| if (tx_ring->used >= NUM_TCB) |
| goto drop_err; |
| |
| if ((adapter->flags & FMP_ADAPTER_FAIL_SEND_MASK) || |
| !netif_carrier_ok(netdev)) |
| goto drop_err; |
| |
| if (send_packet(skb, adapter)) |
| goto drop_err; |
| |
| return NETDEV_TX_OK; |
| |
| drop_err: |
| dev_kfree_skb_any(skb); |
| adapter->netdev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| /* et131x_tx_timeout - Timeout handler |
| * |
| * The handler called when a Tx request times out. The timeout period is |
| * specified by the 'tx_timeo" element in the net_device structure (see |
| * et131x_alloc_device() to see how this value is set). |
| */ |
| static void et131x_tx_timeout(struct net_device *netdev) |
| { |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| struct tx_ring *tx_ring = &adapter->tx_ring; |
| struct tcb *tcb; |
| unsigned long flags; |
| |
| /* If the device is closed, ignore the timeout */ |
| if (~(adapter->flags & FMP_ADAPTER_INTERRUPT_IN_USE)) |
| return; |
| |
| /* Any nonrecoverable hardware error? |
| * Checks adapter->flags for any failure in phy reading |
| */ |
| if (adapter->flags & FMP_ADAPTER_NON_RECOVER_ERROR) |
| return; |
| |
| /* Hardware failure? */ |
| if (adapter->flags & FMP_ADAPTER_HARDWARE_ERROR) { |
| dev_err(&adapter->pdev->dev, "hardware error - reset\n"); |
| return; |
| } |
| |
| /* Is send stuck? */ |
| spin_lock_irqsave(&adapter->tcb_send_qlock, flags); |
| tcb = tx_ring->send_head; |
| spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags); |
| |
| if (tcb) { |
| tcb->count++; |
| |
| if (tcb->count > NIC_SEND_HANG_THRESHOLD) { |
| dev_warn(&adapter->pdev->dev, |
| "Send stuck - reset. tcb->WrIndex %x\n", |
| tcb->index); |
| |
| adapter->netdev->stats.tx_errors++; |
| |
| /* perform reset of tx/rx */ |
| et131x_disable_txrx(netdev); |
| et131x_enable_txrx(netdev); |
| } |
| } |
| } |
| |
| static int et131x_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| int result = 0; |
| struct et131x_adapter *adapter = netdev_priv(netdev); |
| |
| if (new_mtu < 64 || new_mtu > 9216) |
| return -EINVAL; |
| |
| et131x_disable_txrx(netdev); |
| |
| netdev->mtu = new_mtu; |
| |
| et131x_adapter_memory_free(adapter); |
| |
| /* Set the config parameter for Jumbo Packet support */ |
| adapter->registry_jumbo_packet = new_mtu + 14; |
| et131x_soft_reset(adapter); |
| |
| result = et131x_adapter_memory_alloc(adapter); |
| if (result != 0) { |
| dev_warn(&adapter->pdev->dev, |
| "Change MTU failed; couldn't re-alloc DMA memory\n"); |
| return result; |
| } |
| |
| et131x_init_send(adapter); |
| et131x_hwaddr_init(adapter); |
| ether_addr_copy(netdev->dev_addr, adapter->addr); |
| |
| /* Init the device with the new settings */ |
| et131x_adapter_setup(adapter); |
| et131x_enable_txrx(netdev); |
| |
| return result; |
| } |
| |
| static const struct net_device_ops et131x_netdev_ops = { |
| .ndo_open = et131x_open, |
| .ndo_stop = et131x_close, |
| .ndo_start_xmit = et131x_tx, |
| .ndo_set_rx_mode = et131x_multicast, |
| .ndo_tx_timeout = et131x_tx_timeout, |
| .ndo_change_mtu = et131x_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_get_stats = et131x_stats, |
| .ndo_do_ioctl = et131x_ioctl, |
| }; |
| |
| static int et131x_pci_setup(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct et131x_adapter *adapter; |
| int rc; |
| |
| rc = pci_enable_device(pdev); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "pci_enable_device() failed\n"); |
| goto out; |
| } |
| |
| /* Perform some basic PCI checks */ |
| if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { |
| dev_err(&pdev->dev, "Can't find PCI device's base address\n"); |
| rc = -ENODEV; |
| goto err_disable; |
| } |
| |
| rc = pci_request_regions(pdev, DRIVER_NAME); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "Can't get PCI resources\n"); |
| goto err_disable; |
| } |
| |
| pci_set_master(pdev); |
| |
| /* Check the DMA addressing support of this device */ |
| if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)) && |
| dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) { |
| dev_err(&pdev->dev, "No usable DMA addressing method\n"); |
| rc = -EIO; |
| goto err_release_res; |
| } |
| |
| netdev = alloc_etherdev(sizeof(struct et131x_adapter)); |
| if (!netdev) { |
| dev_err(&pdev->dev, "Couldn't alloc netdev struct\n"); |
| rc = -ENOMEM; |
| goto err_release_res; |
| } |
| |
| netdev->watchdog_timeo = ET131X_TX_TIMEOUT; |
| netdev->netdev_ops = &et131x_netdev_ops; |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| netdev->ethtool_ops = &et131x_ethtool_ops; |
| |
| adapter = et131x_adapter_init(netdev, pdev); |
| |
| rc = et131x_pci_init(adapter, pdev); |
| if (rc < 0) |
| goto err_free_dev; |
| |
| /* Map the bus-relative registers to system virtual memory */ |
| adapter->regs = pci_ioremap_bar(pdev, 0); |
| if (!adapter->regs) { |
| dev_err(&pdev->dev, "Cannot map device registers\n"); |
| rc = -ENOMEM; |
| goto err_free_dev; |
| } |
| |
| /* If Phy COMA mode was enabled when we went down, disable it here. */ |
| writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr); |
| |
| et131x_soft_reset(adapter); |
| et131x_disable_interrupts(adapter); |
| |
| rc = et131x_adapter_memory_alloc(adapter); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "Could not alloc adapter memory (DMA)\n"); |
| goto err_iounmap; |
| } |
| |
| et131x_init_send(adapter); |
| |
| netif_napi_add(netdev, &adapter->napi, et131x_poll, 64); |
| |
| ether_addr_copy(netdev->dev_addr, adapter->addr); |
| |
| rc = -ENOMEM; |
| |
| adapter->mii_bus = mdiobus_alloc(); |
| if (!adapter->mii_bus) { |
| dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n"); |
| goto err_mem_free; |
| } |
| |
| adapter->mii_bus->name = "et131x_eth_mii"; |
| snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x", |
| (adapter->pdev->bus->number << 8) | adapter->pdev->devfn); |
| adapter->mii_bus->priv = netdev; |
| adapter->mii_bus->read = et131x_mdio_read; |
| adapter->mii_bus->write = et131x_mdio_write; |
| |
| rc = mdiobus_register(adapter->mii_bus); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to register MII bus\n"); |
| goto err_mdio_free; |
| } |
| |
| rc = et131x_mii_probe(netdev); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to probe MII bus\n"); |
| goto err_mdio_unregister; |
| } |
| |
| et131x_adapter_setup(adapter); |
| |
| /* Init variable for counting how long we do not have link status */ |
| adapter->boot_coma = 0; |
| et1310_disable_phy_coma(adapter); |
| |
| /* We can enable interrupts now |
| * |
| * NOTE - Because registration of interrupt handler is done in the |
| * device's open(), defer enabling device interrupts to that |
| * point |
| */ |
| |
| rc = register_netdev(netdev); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "register_netdev() failed\n"); |
| goto err_phy_disconnect; |
| } |
| |
| /* Register the net_device struct with the PCI subsystem. Save a copy |
| * of the PCI config space for this device now that the device has |
| * been initialized, just in case it needs to be quickly restored. |
| */ |
| pci_set_drvdata(pdev, netdev); |
| out: |
| return rc; |
| |
| err_phy_disconnect: |
| phy_disconnect(adapter->phydev); |
| err_mdio_unregister: |
| mdiobus_unregister(adapter->mii_bus); |
| err_mdio_free: |
| mdiobus_free(adapter->mii_bus); |
| err_mem_free: |
| et131x_adapter_memory_free(adapter); |
| err_iounmap: |
| iounmap(adapter->regs); |
| err_free_dev: |
| pci_dev_put(pdev); |
| free_netdev(netdev); |
| err_release_res: |
| pci_release_regions(pdev); |
| err_disable: |
| pci_disable_device(pdev); |
| goto out; |
| } |
| |
| static const struct pci_device_id et131x_pci_table[] = { |
| { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL}, |
| { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL}, |
| { 0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, et131x_pci_table); |
| |
| static struct pci_driver et131x_driver = { |
| .name = DRIVER_NAME, |
| .id_table = et131x_pci_table, |
| .probe = et131x_pci_setup, |
| .remove = et131x_pci_remove, |
| .driver.pm = &et131x_pm_ops, |
| }; |
| |
| module_pci_driver(et131x_driver); |