| *** The StrongARM version of the CerfBoard/Cube has been discontinued *** |
| The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board |
| that measures approximately 2" square. It includes an Ethernet |
| controller, an RS232-compatible serial port, a USB function port, and |
| one CompactFlash+ slot on the back. Pictures can be found at the |
| Intrinsyc website, http://www.intrinsyc.com. |
| This document describes the support in the Linux kernel for the |
| Supported in this version |
| ========================= |
| - CompactFlash+ slot (select PCMCIA in General Setup and any options |
| - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in |
| - Serial ports with a serial console (hardcoded to 38400 8N1) |
| In order to get this kernel onto your Cerf, you need a server that runs |
| both BOOTP and TFTP. Detailed instructions should have come with your |
| evaluation kit on how to use the bootloader. This series of commands |
| make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig |
| make ARCH=arm CROSS_COMPILE=arm-linux- zImage |
| make ARCH=arm CROSS_COMPILE=arm-linux- modules |
| cp arch/arm/boot/zImage <TFTP directory> |