| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * VEML6030 Ambient Light Sensor |
| * |
| * Copyright (c) 2019, Rishi Gupta <gupt21@gmail.com> |
| * |
| * Datasheet: https://www.vishay.com/docs/84366/veml6030.pdf |
| * Appnote-84367: https://www.vishay.com/docs/84367/designingveml6030.pdf |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/regmap.h> |
| #include <linux/interrupt.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/events.h> |
| |
| /* Device registers */ |
| #define VEML6030_REG_ALS_CONF 0x00 |
| #define VEML6030_REG_ALS_WH 0x01 |
| #define VEML6030_REG_ALS_WL 0x02 |
| #define VEML6030_REG_ALS_PSM 0x03 |
| #define VEML6030_REG_ALS_DATA 0x04 |
| #define VEML6030_REG_WH_DATA 0x05 |
| #define VEML6030_REG_ALS_INT 0x06 |
| |
| /* Bit masks for specific functionality */ |
| #define VEML6030_ALS_IT GENMASK(9, 6) |
| #define VEML6030_PSM GENMASK(2, 1) |
| #define VEML6030_ALS_PERS GENMASK(5, 4) |
| #define VEML6030_ALS_GAIN GENMASK(12, 11) |
| #define VEML6030_PSM_EN BIT(0) |
| #define VEML6030_INT_TH_LOW BIT(15) |
| #define VEML6030_INT_TH_HIGH BIT(14) |
| #define VEML6030_ALS_INT_EN BIT(1) |
| #define VEML6030_ALS_SD BIT(0) |
| |
| /* |
| * The resolution depends on both gain and integration time. The |
| * cur_resolution stores one of the resolution mentioned in the |
| * table during startup and gets updated whenever integration time |
| * or gain is changed. |
| * |
| * Table 'resolution and maximum detection range' in appnote 84367 |
| * is visualized as a 2D array. The cur_gain stores index of gain |
| * in this table (0-3) while the cur_integration_time holds index |
| * of integration time (0-5). |
| */ |
| struct veml6030_data { |
| struct i2c_client *client; |
| struct regmap *regmap; |
| int cur_resolution; |
| int cur_gain; |
| int cur_integration_time; |
| }; |
| |
| /* Integration time available in seconds */ |
| static IIO_CONST_ATTR(in_illuminance_integration_time_available, |
| "0.025 0.05 0.1 0.2 0.4 0.8"); |
| |
| /* |
| * Scale is 1/gain. Value 0.125 is ALS gain x (1/8), 0.25 is |
| * ALS gain x (1/4), 1.0 = ALS gain x 1 and 2.0 is ALS gain x 2. |
| */ |
| static IIO_CONST_ATTR(in_illuminance_scale_available, |
| "0.125 0.25 1.0 2.0"); |
| |
| static struct attribute *veml6030_attributes[] = { |
| &iio_const_attr_in_illuminance_integration_time_available.dev_attr.attr, |
| &iio_const_attr_in_illuminance_scale_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group veml6030_attr_group = { |
| .attrs = veml6030_attributes, |
| }; |
| |
| /* |
| * Persistence = 1/2/4/8 x integration time |
| * Minimum time for which light readings must stay above configured |
| * threshold to assert the interrupt. |
| */ |
| static const char * const period_values[] = { |
| "0.1 0.2 0.4 0.8", |
| "0.2 0.4 0.8 1.6", |
| "0.4 0.8 1.6 3.2", |
| "0.8 1.6 3.2 6.4", |
| "0.05 0.1 0.2 0.4", |
| "0.025 0.050 0.1 0.2" |
| }; |
| |
| /* |
| * Return list of valid period values in seconds corresponding to |
| * the currently active integration time. |
| */ |
| static ssize_t in_illuminance_period_available_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret, reg, x; |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als conf register %d\n", ret); |
| return ret; |
| } |
| |
| ret = ((reg >> 6) & 0xF); |
| switch (ret) { |
| case 0: |
| case 1: |
| case 2: |
| case 3: |
| x = ret; |
| break; |
| case 8: |
| x = 4; |
| break; |
| case 12: |
| x = 5; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return snprintf(buf, PAGE_SIZE, "%s\n", period_values[x]); |
| } |
| |
| static IIO_DEVICE_ATTR_RO(in_illuminance_period_available, 0); |
| |
| static struct attribute *veml6030_event_attributes[] = { |
| &iio_dev_attr_in_illuminance_period_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group veml6030_event_attr_group = { |
| .attrs = veml6030_event_attributes, |
| }; |
| |
| static int veml6030_als_pwr_on(struct veml6030_data *data) |
| { |
| return regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, |
| VEML6030_ALS_SD, 0); |
| } |
| |
| static int veml6030_als_shut_down(struct veml6030_data *data) |
| { |
| return regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, |
| VEML6030_ALS_SD, 1); |
| } |
| |
| static void veml6030_als_shut_down_action(void *data) |
| { |
| veml6030_als_shut_down(data); |
| } |
| |
| static const struct iio_event_spec veml6030_event_spec[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_EITHER, |
| .mask_separate = BIT(IIO_EV_INFO_PERIOD) | |
| BIT(IIO_EV_INFO_ENABLE), |
| }, |
| }; |
| |
| /* Channel number */ |
| enum veml6030_chan { |
| CH_ALS, |
| CH_WHITE, |
| }; |
| |
| static const struct iio_chan_spec veml6030_channels[] = { |
| { |
| .type = IIO_LIGHT, |
| .channel = CH_ALS, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_PROCESSED) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_SCALE), |
| .event_spec = veml6030_event_spec, |
| .num_event_specs = ARRAY_SIZE(veml6030_event_spec), |
| }, |
| { |
| .type = IIO_INTENSITY, |
| .channel = CH_WHITE, |
| .modified = 1, |
| .channel2 = IIO_MOD_LIGHT_BOTH, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_PROCESSED), |
| }, |
| }; |
| |
| static const struct regmap_config veml6030_regmap_config = { |
| .name = "veml6030_regmap", |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = VEML6030_REG_ALS_INT, |
| .val_format_endian = REGMAP_ENDIAN_LITTLE, |
| }; |
| |
| static int veml6030_get_intgrn_tm(struct iio_dev *indio_dev, |
| int *val, int *val2) |
| { |
| int ret, reg; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als conf register %d\n", ret); |
| return ret; |
| } |
| |
| switch ((reg >> 6) & 0xF) { |
| case 0: |
| *val2 = 100000; |
| break; |
| case 1: |
| *val2 = 200000; |
| break; |
| case 2: |
| *val2 = 400000; |
| break; |
| case 3: |
| *val2 = 800000; |
| break; |
| case 8: |
| *val2 = 50000; |
| break; |
| case 12: |
| *val2 = 25000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *val = 0; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int veml6030_set_intgrn_tm(struct iio_dev *indio_dev, |
| int val, int val2) |
| { |
| int ret, new_int_time, int_idx; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| if (val) |
| return -EINVAL; |
| |
| switch (val2) { |
| case 25000: |
| new_int_time = 0x300; |
| int_idx = 5; |
| break; |
| case 50000: |
| new_int_time = 0x200; |
| int_idx = 4; |
| break; |
| case 100000: |
| new_int_time = 0x00; |
| int_idx = 3; |
| break; |
| case 200000: |
| new_int_time = 0x40; |
| int_idx = 2; |
| break; |
| case 400000: |
| new_int_time = 0x80; |
| int_idx = 1; |
| break; |
| case 800000: |
| new_int_time = 0xC0; |
| int_idx = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, |
| VEML6030_ALS_IT, new_int_time); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't update als integration time %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Cache current integration time and update resolution. For every |
| * increase in integration time to next level, resolution is halved |
| * and vice-versa. |
| */ |
| if (data->cur_integration_time < int_idx) |
| data->cur_resolution <<= int_idx - data->cur_integration_time; |
| else if (data->cur_integration_time > int_idx) |
| data->cur_resolution >>= data->cur_integration_time - int_idx; |
| |
| data->cur_integration_time = int_idx; |
| |
| return ret; |
| } |
| |
| static int veml6030_read_persistence(struct iio_dev *indio_dev, |
| int *val, int *val2) |
| { |
| int ret, reg, period, x, y; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = veml6030_get_intgrn_tm(indio_dev, &x, &y); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als conf register %d\n", ret); |
| } |
| |
| /* integration time multiplied by 1/2/4/8 */ |
| period = y * (1 << ((reg >> 4) & 0x03)); |
| |
| *val = period / 1000000; |
| *val2 = period % 1000000; |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int veml6030_write_persistence(struct iio_dev *indio_dev, |
| int val, int val2) |
| { |
| int ret, period, x, y; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = veml6030_get_intgrn_tm(indio_dev, &x, &y); |
| if (ret < 0) |
| return ret; |
| |
| if (!val) { |
| period = val2 / y; |
| } else { |
| if ((val == 1) && (val2 == 600000)) |
| period = 1600000 / y; |
| else if ((val == 3) && (val2 == 200000)) |
| period = 3200000 / y; |
| else if ((val == 6) && (val2 == 400000)) |
| period = 6400000 / y; |
| else |
| period = -1; |
| } |
| |
| if (period <= 0 || period > 8 || hweight8(period) != 1) |
| return -EINVAL; |
| |
| ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, |
| VEML6030_ALS_PERS, (ffs(period) - 1) << 4); |
| if (ret) |
| dev_err(&data->client->dev, |
| "can't set persistence value %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int veml6030_set_als_gain(struct iio_dev *indio_dev, |
| int val, int val2) |
| { |
| int ret, new_gain, gain_idx; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| if (val == 0 && val2 == 125000) { |
| new_gain = 0x1000; /* 0x02 << 11 */ |
| gain_idx = 3; |
| } else if (val == 0 && val2 == 250000) { |
| new_gain = 0x1800; |
| gain_idx = 2; |
| } else if (val == 1 && val2 == 0) { |
| new_gain = 0x00; |
| gain_idx = 1; |
| } else if (val == 2 && val2 == 0) { |
| new_gain = 0x800; |
| gain_idx = 0; |
| } else { |
| return -EINVAL; |
| } |
| |
| ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, |
| VEML6030_ALS_GAIN, new_gain); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't set als gain %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Cache currently set gain & update resolution. For every |
| * increase in the gain to next level, resolution is halved |
| * and vice-versa. |
| */ |
| if (data->cur_gain < gain_idx) |
| data->cur_resolution <<= gain_idx - data->cur_gain; |
| else if (data->cur_gain > gain_idx) |
| data->cur_resolution >>= data->cur_gain - gain_idx; |
| |
| data->cur_gain = gain_idx; |
| |
| return ret; |
| } |
| |
| static int veml6030_get_als_gain(struct iio_dev *indio_dev, |
| int *val, int *val2) |
| { |
| int ret, reg; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als conf register %d\n", ret); |
| return ret; |
| } |
| |
| switch ((reg >> 11) & 0x03) { |
| case 0: |
| *val = 1; |
| *val2 = 0; |
| break; |
| case 1: |
| *val = 2; |
| *val2 = 0; |
| break; |
| case 2: |
| *val = 0; |
| *val2 = 125000; |
| break; |
| case 3: |
| *val = 0; |
| *val2 = 250000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| static int veml6030_read_thresh(struct iio_dev *indio_dev, |
| int *val, int *val2, int dir) |
| { |
| int ret, reg; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| if (dir == IIO_EV_DIR_RISING) |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_WH, ®); |
| else |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_WL, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als threshold value %d\n", ret); |
| return ret; |
| } |
| |
| *val = reg & 0xffff; |
| return IIO_VAL_INT; |
| } |
| |
| static int veml6030_write_thresh(struct iio_dev *indio_dev, |
| int val, int val2, int dir) |
| { |
| int ret; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| if (val > 0xFFFF || val < 0 || val2) |
| return -EINVAL; |
| |
| if (dir == IIO_EV_DIR_RISING) { |
| ret = regmap_write(data->regmap, VEML6030_REG_ALS_WH, val); |
| if (ret) |
| dev_err(&data->client->dev, |
| "can't set high threshold %d\n", ret); |
| } else { |
| ret = regmap_write(data->regmap, VEML6030_REG_ALS_WL, val); |
| if (ret) |
| dev_err(&data->client->dev, |
| "can't set low threshold %d\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Provide both raw as well as light reading in lux. |
| * light (in lux) = resolution * raw reading |
| */ |
| static int veml6030_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| int ret, reg; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| struct regmap *regmap = data->regmap; |
| struct device *dev = &data->client->dev; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| case IIO_CHAN_INFO_PROCESSED: |
| switch (chan->type) { |
| case IIO_LIGHT: |
| ret = regmap_read(regmap, VEML6030_REG_ALS_DATA, ®); |
| if (ret < 0) { |
| dev_err(dev, "can't read als data %d\n", ret); |
| return ret; |
| } |
| if (mask == IIO_CHAN_INFO_PROCESSED) { |
| *val = (reg * data->cur_resolution) / 10000; |
| *val2 = (reg * data->cur_resolution) % 10000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| *val = reg; |
| return IIO_VAL_INT; |
| case IIO_INTENSITY: |
| ret = regmap_read(regmap, VEML6030_REG_WH_DATA, ®); |
| if (ret < 0) { |
| dev_err(dev, "can't read white data %d\n", ret); |
| return ret; |
| } |
| if (mask == IIO_CHAN_INFO_PROCESSED) { |
| *val = (reg * data->cur_resolution) / 10000; |
| *val2 = (reg * data->cur_resolution) % 10000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| *val = reg; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_INT_TIME: |
| if (chan->type == IIO_LIGHT) |
| return veml6030_get_intgrn_tm(indio_dev, val, val2); |
| return -EINVAL; |
| case IIO_CHAN_INFO_SCALE: |
| if (chan->type == IIO_LIGHT) |
| return veml6030_get_als_gain(indio_dev, val, val2); |
| return -EINVAL; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int veml6030_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_INT_TIME: |
| switch (chan->type) { |
| case IIO_LIGHT: |
| return veml6030_set_intgrn_tm(indio_dev, val, val2); |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->type) { |
| case IIO_LIGHT: |
| return veml6030_set_als_gain(indio_dev, val, val2); |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int veml6030_read_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, enum iio_event_info info, |
| int *val, int *val2) |
| { |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| case IIO_EV_DIR_FALLING: |
| return veml6030_read_thresh(indio_dev, val, val2, dir); |
| default: |
| return -EINVAL; |
| } |
| break; |
| case IIO_EV_INFO_PERIOD: |
| return veml6030_read_persistence(indio_dev, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int veml6030_write_event_val(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, enum iio_event_info info, |
| int val, int val2) |
| { |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| return veml6030_write_thresh(indio_dev, val, val2, dir); |
| case IIO_EV_INFO_PERIOD: |
| return veml6030_write_persistence(indio_dev, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int veml6030_read_interrupt_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| int ret, reg; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_CONF, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als conf register %d\n", ret); |
| return ret; |
| } |
| |
| if (reg & VEML6030_ALS_INT_EN) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /* |
| * Sensor should not be measuring light when interrupt is configured. |
| * Therefore correct sequence to configure interrupt functionality is: |
| * shut down -> enable/disable interrupt -> power on |
| * |
| * state = 1 enables interrupt, state = 0 disables interrupt |
| */ |
| static int veml6030_write_interrupt_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, enum iio_event_type type, |
| enum iio_event_direction dir, int state) |
| { |
| int ret; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| if (state < 0 || state > 1) |
| return -EINVAL; |
| |
| ret = veml6030_als_shut_down(data); |
| if (ret < 0) { |
| dev_err(&data->client->dev, |
| "can't disable als to configure interrupt %d\n", ret); |
| return ret; |
| } |
| |
| /* enable interrupt + power on */ |
| ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_CONF, |
| VEML6030_ALS_INT_EN | VEML6030_ALS_SD, state << 1); |
| if (ret) |
| dev_err(&data->client->dev, |
| "can't enable interrupt & poweron als %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct iio_info veml6030_info = { |
| .read_raw = veml6030_read_raw, |
| .write_raw = veml6030_write_raw, |
| .read_event_value = veml6030_read_event_val, |
| .write_event_value = veml6030_write_event_val, |
| .read_event_config = veml6030_read_interrupt_config, |
| .write_event_config = veml6030_write_interrupt_config, |
| .attrs = &veml6030_attr_group, |
| .event_attrs = &veml6030_event_attr_group, |
| }; |
| |
| static const struct iio_info veml6030_info_no_irq = { |
| .read_raw = veml6030_read_raw, |
| .write_raw = veml6030_write_raw, |
| .attrs = &veml6030_attr_group, |
| }; |
| |
| static irqreturn_t veml6030_event_handler(int irq, void *private) |
| { |
| int ret, reg, evtdir; |
| struct iio_dev *indio_dev = private; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_INT, ®); |
| if (ret) { |
| dev_err(&data->client->dev, |
| "can't read als interrupt register %d\n", ret); |
| return IRQ_HANDLED; |
| } |
| |
| /* Spurious interrupt handling */ |
| if (!(reg & (VEML6030_INT_TH_HIGH | VEML6030_INT_TH_LOW))) |
| return IRQ_NONE; |
| |
| if (reg & VEML6030_INT_TH_HIGH) |
| evtdir = IIO_EV_DIR_RISING; |
| else |
| evtdir = IIO_EV_DIR_FALLING; |
| |
| iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_INTENSITY, |
| 0, IIO_EV_TYPE_THRESH, evtdir), |
| iio_get_time_ns(indio_dev)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Set ALS gain to 1/8, integration time to 100 ms, PSM to mode 2, |
| * persistence to 1 x integration time and the threshold |
| * interrupt disabled by default. First shutdown the sensor, |
| * update registers and then power on the sensor. |
| */ |
| static int veml6030_hw_init(struct iio_dev *indio_dev) |
| { |
| int ret, val; |
| struct veml6030_data *data = iio_priv(indio_dev); |
| struct i2c_client *client = data->client; |
| |
| ret = veml6030_als_shut_down(data); |
| if (ret) { |
| dev_err(&client->dev, "can't shutdown als %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(data->regmap, VEML6030_REG_ALS_CONF, 0x1001); |
| if (ret) { |
| dev_err(&client->dev, "can't setup als configs %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_update_bits(data->regmap, VEML6030_REG_ALS_PSM, |
| VEML6030_PSM | VEML6030_PSM_EN, 0x03); |
| if (ret) { |
| dev_err(&client->dev, "can't setup default PSM %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(data->regmap, VEML6030_REG_ALS_WH, 0xFFFF); |
| if (ret) { |
| dev_err(&client->dev, "can't setup high threshold %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_write(data->regmap, VEML6030_REG_ALS_WL, 0x0000); |
| if (ret) { |
| dev_err(&client->dev, "can't setup low threshold %d\n", ret); |
| return ret; |
| } |
| |
| ret = veml6030_als_pwr_on(data); |
| if (ret) { |
| dev_err(&client->dev, "can't poweron als %d\n", ret); |
| return ret; |
| } |
| |
| /* Wait 4 ms to let processor & oscillator start correctly */ |
| usleep_range(4000, 4002); |
| |
| /* Clear stale interrupt status bits if any during start */ |
| ret = regmap_read(data->regmap, VEML6030_REG_ALS_INT, &val); |
| if (ret < 0) { |
| dev_err(&client->dev, |
| "can't clear als interrupt status %d\n", ret); |
| return ret; |
| } |
| |
| /* Cache currently active measurement parameters */ |
| data->cur_gain = 3; |
| data->cur_resolution = 4608; |
| data->cur_integration_time = 3; |
| |
| return ret; |
| } |
| |
| static int veml6030_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int ret; |
| struct veml6030_data *data; |
| struct iio_dev *indio_dev; |
| struct regmap *regmap; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "i2c adapter doesn't support plain i2c\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| regmap = devm_regmap_init_i2c(client, &veml6030_regmap_config); |
| if (IS_ERR(regmap)) { |
| dev_err(&client->dev, "can't setup regmap\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| data->regmap = regmap; |
| |
| indio_dev->dev.parent = &client->dev; |
| indio_dev->name = "veml6030"; |
| indio_dev->channels = veml6030_channels; |
| indio_dev->num_channels = ARRAY_SIZE(veml6030_channels); |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, veml6030_event_handler, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "veml6030", indio_dev); |
| if (ret < 0) { |
| dev_err(&client->dev, |
| "irq %d request failed\n", client->irq); |
| return ret; |
| } |
| indio_dev->info = &veml6030_info; |
| } else { |
| indio_dev->info = &veml6030_info_no_irq; |
| } |
| |
| ret = veml6030_hw_init(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = devm_add_action_or_reset(&client->dev, |
| veml6030_als_shut_down_action, data); |
| if (ret < 0) |
| return ret; |
| |
| return devm_iio_device_register(&client->dev, indio_dev); |
| } |
| |
| static int __maybe_unused veml6030_runtime_suspend(struct device *dev) |
| { |
| int ret; |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = veml6030_als_shut_down(data); |
| if (ret < 0) |
| dev_err(&data->client->dev, "can't suspend als %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused veml6030_runtime_resume(struct device *dev) |
| { |
| int ret; |
| struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); |
| struct veml6030_data *data = iio_priv(indio_dev); |
| |
| ret = veml6030_als_pwr_on(data); |
| if (ret < 0) |
| dev_err(&data->client->dev, "can't resume als %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops veml6030_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(veml6030_runtime_suspend, |
| veml6030_runtime_resume, NULL) |
| }; |
| |
| static const struct of_device_id veml6030_of_match[] = { |
| { .compatible = "vishay,veml6030" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, veml6030_of_match); |
| |
| static const struct i2c_device_id veml6030_id[] = { |
| { "veml6030", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, veml6030_id); |
| |
| static struct i2c_driver veml6030_driver = { |
| .driver = { |
| .name = "veml6030", |
| .of_match_table = veml6030_of_match, |
| .pm = &veml6030_pm_ops, |
| }, |
| .probe = veml6030_probe, |
| .id_table = veml6030_id, |
| }; |
| module_i2c_driver(veml6030_driver); |
| |
| MODULE_AUTHOR("Rishi Gupta <gupt21@gmail.com>"); |
| MODULE_DESCRIPTION("VEML6030 Ambient Light Sensor"); |
| MODULE_LICENSE("GPL v2"); |