| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/display-timings.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: display timings bindings |
| |
| maintainers: |
| - Thierry Reding <thierry.reding@gmail.com> |
| - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
| - Sam Ravnborg <sam@ravnborg.org> |
| |
| description: | |
| A display panel may be able to handle several display timings, |
| with different resolutions. |
| The display-timings node makes it possible to specify the timings |
| and to specify the timing that is native for the display. |
| |
| properties: |
| $nodename: |
| const: display-timings |
| |
| native-mode: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: | |
| The default display timing is the one specified as native-mode. |
| If no native-mode is specified then the first node is assumed |
| to be the native mode. |
| |
| patternProperties: |
| "^timing": |
| type: object |
| allOf: |
| - $ref: panel-timing.yaml# |
| |
| additionalProperties: false |
| |
| examples: |
| - |+ |
| |
| /* |
| * Example that specifies panel timing using minimum, typical, |
| * maximum values as commonly used in datasheet description. |
| * timing1 is the native-mode. |
| */ |
| display-timings { |
| native-mode = <&timing1>; |
| timing0 { |
| /* 1920x1080p24 */ |
| clock-frequency = <148500000>; |
| hactive = <1920>; |
| vactive = <1080>; |
| hsync-len = <0 44 60>; |
| hfront-porch = <80 88 95>; |
| hback-porch = <100 148 160>; |
| vfront-porch = <0 4 6>; |
| vback-porch = <0 36 50>; |
| vsync-len = <0 5 6>; |
| }; |
| timing1 { |
| /* 1920x1080p24 */ |
| clock-frequency = <52000000>; |
| hactive = <1920>; |
| vactive = <1080>; |
| hfront-porch = <25>; |
| hback-porch = <25>; |
| hsync-len = <0 25 25>; |
| vback-porch = <2>; |
| vfront-porch = <2>; |
| vsync-len = <2>; |
| hsync-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| }; |
| |
| ... |
