| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * linux/kernel/seccomp.c |
| * |
| * Copyright 2004-2005 Andrea Arcangeli <andrea@cpushare.com> |
| * |
| * Copyright (C) 2012 Google, Inc. |
| * Will Drewry <wad@chromium.org> |
| * |
| * This defines a simple but solid secure-computing facility. |
| * |
| * Mode 1 uses a fixed list of allowed system calls. |
| * Mode 2 allows user-defined system call filters in the form |
| * of Berkeley Packet Filters/Linux Socket Filters. |
| */ |
| #define pr_fmt(fmt) "seccomp: " fmt |
| |
| #include <linux/refcount.h> |
| #include <linux/audit.h> |
| #include <linux/compat.h> |
| #include <linux/coredump.h> |
| #include <linux/kmemleak.h> |
| #include <linux/nospec.h> |
| #include <linux/prctl.h> |
| #include <linux/sched.h> |
| #include <linux/sched/task_stack.h> |
| #include <linux/seccomp.h> |
| #include <linux/slab.h> |
| #include <linux/syscalls.h> |
| #include <linux/sysctl.h> |
| |
| #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER |
| #include <asm/syscall.h> |
| #endif |
| |
| #ifdef CONFIG_SECCOMP_FILTER |
| #include <linux/file.h> |
| #include <linux/filter.h> |
| #include <linux/pid.h> |
| #include <linux/ptrace.h> |
| #include <linux/capability.h> |
| #include <linux/tracehook.h> |
| #include <linux/uaccess.h> |
| #include <linux/anon_inodes.h> |
| #include <linux/lockdep.h> |
| |
| /* |
| * When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced, it had the |
| * wrong direction flag in the ioctl number. This is the broken one, |
| * which the kernel needs to keep supporting until all userspaces stop |
| * using the wrong command number. |
| */ |
| #define SECCOMP_IOCTL_NOTIF_ID_VALID_WRONG_DIR SECCOMP_IOR(2, __u64) |
| |
| enum notify_state { |
| SECCOMP_NOTIFY_INIT, |
| SECCOMP_NOTIFY_SENT, |
| SECCOMP_NOTIFY_REPLIED, |
| }; |
| |
| struct seccomp_knotif { |
| /* The struct pid of the task whose filter triggered the notification */ |
| struct task_struct *task; |
| |
| /* The "cookie" for this request; this is unique for this filter. */ |
| u64 id; |
| |
| /* |
| * The seccomp data. This pointer is valid the entire time this |
| * notification is active, since it comes from __seccomp_filter which |
| * eclipses the entire lifecycle here. |
| */ |
| const struct seccomp_data *data; |
| |
| /* |
| * Notification states. When SECCOMP_RET_USER_NOTIF is returned, a |
| * struct seccomp_knotif is created and starts out in INIT. Once the |
| * handler reads the notification off of an FD, it transitions to SENT. |
| * If a signal is received the state transitions back to INIT and |
| * another message is sent. When the userspace handler replies, state |
| * transitions to REPLIED. |
| */ |
| enum notify_state state; |
| |
| /* The return values, only valid when in SECCOMP_NOTIFY_REPLIED */ |
| int error; |
| long val; |
| u32 flags; |
| |
| /* |
| * Signals when this has changed states, such as the listener |
| * dying, a new seccomp addfd message, or changing to REPLIED |
| */ |
| struct completion ready; |
| |
| struct list_head list; |
| |
| /* outstanding addfd requests */ |
| struct list_head addfd; |
| }; |
| |
| /** |
| * struct seccomp_kaddfd - container for seccomp_addfd ioctl messages |
| * |
| * @file: A reference to the file to install in the other task |
| * @fd: The fd number to install it at. If the fd number is -1, it means the |
| * installing process should allocate the fd as normal. |
| * @flags: The flags for the new file descriptor. At the moment, only O_CLOEXEC |
| * is allowed. |
| * @ioctl_flags: The flags used for the seccomp_addfd ioctl. |
| * @ret: The return value of the installing process. It is set to the fd num |
| * upon success (>= 0). |
| * @completion: Indicates that the installing process has completed fd |
| * installation, or gone away (either due to successful |
| * reply, or signal) |
| * |
| */ |
| struct seccomp_kaddfd { |
| struct file *file; |
| int fd; |
| unsigned int flags; |
| __u32 ioctl_flags; |
| |
| union { |
| bool setfd; |
| /* To only be set on reply */ |
| int ret; |
| }; |
| struct completion completion; |
| struct list_head list; |
| }; |
| |
| /** |
| * struct notification - container for seccomp userspace notifications. Since |
| * most seccomp filters will not have notification listeners attached and this |
| * structure is fairly large, we store the notification-specific stuff in a |
| * separate structure. |
| * |
| * @request: A semaphore that users of this notification can wait on for |
| * changes. Actual reads and writes are still controlled with |
| * filter->notify_lock. |
| * @next_id: The id of the next request. |
| * @notifications: A list of struct seccomp_knotif elements. |
| */ |
| struct notification { |
| struct semaphore request; |
| u64 next_id; |
| struct list_head notifications; |
| }; |
| |
| #ifdef SECCOMP_ARCH_NATIVE |
| /** |
| * struct action_cache - per-filter cache of seccomp actions per |
| * arch/syscall pair |
| * |
| * @allow_native: A bitmap where each bit represents whether the |
| * filter will always allow the syscall, for the |
| * native architecture. |
| * @allow_compat: A bitmap where each bit represents whether the |
| * filter will always allow the syscall, for the |
| * compat architecture. |
| */ |
| struct action_cache { |
| DECLARE_BITMAP(allow_native, SECCOMP_ARCH_NATIVE_NR); |
| #ifdef SECCOMP_ARCH_COMPAT |
| DECLARE_BITMAP(allow_compat, SECCOMP_ARCH_COMPAT_NR); |
| #endif |
| }; |
| #else |
| struct action_cache { }; |
| |
| static inline bool seccomp_cache_check_allow(const struct seccomp_filter *sfilter, |
| const struct seccomp_data *sd) |
| { |
| return false; |
| } |
| |
| static inline void seccomp_cache_prepare(struct seccomp_filter *sfilter) |
| { |
| } |
| #endif /* SECCOMP_ARCH_NATIVE */ |
| |
| /** |
| * struct seccomp_filter - container for seccomp BPF programs |
| * |
| * @refs: Reference count to manage the object lifetime. |
| * A filter's reference count is incremented for each directly |
| * attached task, once for the dependent filter, and if |
| * requested for the user notifier. When @refs reaches zero, |
| * the filter can be freed. |
| * @users: A filter's @users count is incremented for each directly |
| * attached task (filter installation, fork(), thread_sync), |
| * and once for the dependent filter (tracked in filter->prev). |
| * When it reaches zero it indicates that no direct or indirect |
| * users of that filter exist. No new tasks can get associated with |
| * this filter after reaching 0. The @users count is always smaller |
| * or equal to @refs. Hence, reaching 0 for @users does not mean |
| * the filter can be freed. |
| * @cache: cache of arch/syscall mappings to actions |
| * @log: true if all actions except for SECCOMP_RET_ALLOW should be logged |
| * @prev: points to a previously installed, or inherited, filter |
| * @prog: the BPF program to evaluate |
| * @notif: the struct that holds all notification related information |
| * @notify_lock: A lock for all notification-related accesses. |
| * @wqh: A wait queue for poll if a notifier is in use. |
| * |
| * seccomp_filter objects are organized in a tree linked via the @prev |
| * pointer. For any task, it appears to be a singly-linked list starting |
| * with current->seccomp.filter, the most recently attached or inherited filter. |
| * However, multiple filters may share a @prev node, by way of fork(), which |
| * results in a unidirectional tree existing in memory. This is similar to |
| * how namespaces work. |
| * |
| * seccomp_filter objects should never be modified after being attached |
| * to a task_struct (other than @refs). |
| */ |
| struct seccomp_filter { |
| refcount_t refs; |
| refcount_t users; |
| bool log; |
| struct action_cache cache; |
| struct seccomp_filter *prev; |
| struct bpf_prog *prog; |
| struct notification *notif; |
| struct mutex notify_lock; |
| wait_queue_head_t wqh; |
| }; |
| |
| /* Limit any path through the tree to 256KB worth of instructions. */ |
| #define MAX_INSNS_PER_PATH ((1 << 18) / sizeof(struct sock_filter)) |
| |
| /* |
| * Endianness is explicitly ignored and left for BPF program authors to manage |
| * as per the specific architecture. |
| */ |
| static void populate_seccomp_data(struct seccomp_data *sd) |
| { |
| /* |
| * Instead of using current_pt_reg(), we're already doing the work |
| * to safely fetch "current", so just use "task" everywhere below. |
| */ |
| struct task_struct *task = current; |
| struct pt_regs *regs = task_pt_regs(task); |
| unsigned long args[6]; |
| |
| sd->nr = syscall_get_nr(task, regs); |
| sd->arch = syscall_get_arch(task); |
| syscall_get_arguments(task, regs, args); |
| sd->args[0] = args[0]; |
| sd->args[1] = args[1]; |
| sd->args[2] = args[2]; |
| sd->args[3] = args[3]; |
| sd->args[4] = args[4]; |
| sd->args[5] = args[5]; |
| sd->instruction_pointer = KSTK_EIP(task); |
| } |
| |
| /** |
| * seccomp_check_filter - verify seccomp filter code |
| * @filter: filter to verify |
| * @flen: length of filter |
| * |
| * Takes a previously checked filter (by bpf_check_classic) and |
| * redirects all filter code that loads struct sk_buff data |
| * and related data through seccomp_bpf_load. It also |
| * enforces length and alignment checking of those loads. |
| * |
| * Returns 0 if the rule set is legal or -EINVAL if not. |
| */ |
| static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen) |
| { |
| int pc; |
| for (pc = 0; pc < flen; pc++) { |
| struct sock_filter *ftest = &filter[pc]; |
| u16 code = ftest->code; |
| u32 k = ftest->k; |
| |
| switch (code) { |
| case BPF_LD | BPF_W | BPF_ABS: |
| ftest->code = BPF_LDX | BPF_W | BPF_ABS; |
| /* 32-bit aligned and not out of bounds. */ |
| if (k >= sizeof(struct seccomp_data) || k & 3) |
| return -EINVAL; |
| continue; |
| case BPF_LD | BPF_W | BPF_LEN: |
| ftest->code = BPF_LD | BPF_IMM; |
| ftest->k = sizeof(struct seccomp_data); |
| continue; |
| case BPF_LDX | BPF_W | BPF_LEN: |
| ftest->code = BPF_LDX | BPF_IMM; |
| ftest->k = sizeof(struct seccomp_data); |
| continue; |
| /* Explicitly include allowed calls. */ |
| case BPF_RET | BPF_K: |
| case BPF_RET | BPF_A: |
| case BPF_ALU | BPF_ADD | BPF_K: |
| case BPF_ALU | BPF_ADD | BPF_X: |
| case BPF_ALU | BPF_SUB | BPF_K: |
| case BPF_ALU | BPF_SUB | BPF_X: |
| case BPF_ALU | BPF_MUL | BPF_K: |
| case BPF_ALU | BPF_MUL | BPF_X: |
| case BPF_ALU | BPF_DIV | BPF_K: |
| case BPF_ALU | BPF_DIV | BPF_X: |
| case BPF_ALU | BPF_AND | BPF_K: |
| case BPF_ALU | BPF_AND | BPF_X: |
| case BPF_ALU | BPF_OR | BPF_K: |
| case BPF_ALU | BPF_OR | BPF_X: |
| case BPF_ALU | BPF_XOR | BPF_K: |
| case BPF_ALU | BPF_XOR | BPF_X: |
| case BPF_ALU | BPF_LSH | BPF_K: |
| case BPF_ALU | BPF_LSH | BPF_X: |
| case BPF_ALU | BPF_RSH | BPF_K: |
| case BPF_ALU | BPF_RSH | BPF_X: |
| case BPF_ALU | BPF_NEG: |
| case BPF_LD | BPF_IMM: |
| case BPF_LDX | BPF_IMM: |
| case BPF_MISC | BPF_TAX: |
| case BPF_MISC | BPF_TXA: |
| case BPF_LD | BPF_MEM: |
| case BPF_LDX | BPF_MEM: |
| case BPF_ST: |
| case BPF_STX: |
| case BPF_JMP | BPF_JA: |
| case BPF_JMP | BPF_JEQ | BPF_K: |
| case BPF_JMP | BPF_JEQ | BPF_X: |
| case BPF_JMP | BPF_JGE | BPF_K: |
| case BPF_JMP | BPF_JGE | BPF_X: |
| case BPF_JMP | BPF_JGT | BPF_K: |
| case BPF_JMP | BPF_JGT | BPF_X: |
| case BPF_JMP | BPF_JSET | BPF_K: |
| case BPF_JMP | BPF_JSET | BPF_X: |
| continue; |
| default: |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| #ifdef SECCOMP_ARCH_NATIVE |
| static inline bool seccomp_cache_check_allow_bitmap(const void *bitmap, |
| size_t bitmap_size, |
| int syscall_nr) |
| { |
| if (unlikely(syscall_nr < 0 || syscall_nr >= bitmap_size)) |
| return false; |
| syscall_nr = array_index_nospec(syscall_nr, bitmap_size); |
| |
| return test_bit(syscall_nr, bitmap); |
| } |
| |
| /** |
| * seccomp_cache_check_allow - lookup seccomp cache |
| * @sfilter: The seccomp filter |
| * @sd: The seccomp data to lookup the cache with |
| * |
| * Returns true if the seccomp_data is cached and allowed. |
| */ |
| static inline bool seccomp_cache_check_allow(const struct seccomp_filter *sfilter, |
| const struct seccomp_data *sd) |
| { |
| int syscall_nr = sd->nr; |
| const struct action_cache *cache = &sfilter->cache; |
| |
| #ifndef SECCOMP_ARCH_COMPAT |
| /* A native-only architecture doesn't need to check sd->arch. */ |
| return seccomp_cache_check_allow_bitmap(cache->allow_native, |
| SECCOMP_ARCH_NATIVE_NR, |
| syscall_nr); |
| #else |
| if (likely(sd->arch == SECCOMP_ARCH_NATIVE)) |
| return seccomp_cache_check_allow_bitmap(cache->allow_native, |
| SECCOMP_ARCH_NATIVE_NR, |
| syscall_nr); |
| if (likely(sd->arch == SECCOMP_ARCH_COMPAT)) |
| return seccomp_cache_check_allow_bitmap(cache->allow_compat, |
| SECCOMP_ARCH_COMPAT_NR, |
| syscall_nr); |
| #endif /* SECCOMP_ARCH_COMPAT */ |
| |
| WARN_ON_ONCE(true); |
| return false; |
| } |
| #endif /* SECCOMP_ARCH_NATIVE */ |
| |
| /** |
| * seccomp_run_filters - evaluates all seccomp filters against @sd |
| * @sd: optional seccomp data to be passed to filters |
| * @match: stores struct seccomp_filter that resulted in the return value, |
| * unless filter returned SECCOMP_RET_ALLOW, in which case it will |
| * be unchanged. |
| * |
| * Returns valid seccomp BPF response codes. |
| */ |
| #define ACTION_ONLY(ret) ((s32)((ret) & (SECCOMP_RET_ACTION_FULL))) |
| static u32 seccomp_run_filters(const struct seccomp_data *sd, |
| struct seccomp_filter **match) |
| { |
| u32 ret = SECCOMP_RET_ALLOW; |
| /* Make sure cross-thread synced filter points somewhere sane. */ |
| struct seccomp_filter *f = |
| READ_ONCE(current->seccomp.filter); |
| |
| /* Ensure unexpected behavior doesn't result in failing open. */ |
| if (WARN_ON(f == NULL)) |
| return SECCOMP_RET_KILL_PROCESS; |
| |
| if (seccomp_cache_check_allow(f, sd)) |
| return SECCOMP_RET_ALLOW; |
| |
| /* |
| * All filters in the list are evaluated and the lowest BPF return |
| * value always takes priority (ignoring the DATA). |
| */ |
| for (; f; f = f->prev) { |
| u32 cur_ret = bpf_prog_run_pin_on_cpu(f->prog, sd); |
| |
| if (ACTION_ONLY(cur_ret) < ACTION_ONLY(ret)) { |
| ret = cur_ret; |
| *match = f; |
| } |
| } |
| return ret; |
| } |
| #endif /* CONFIG_SECCOMP_FILTER */ |
| |
| static inline bool seccomp_may_assign_mode(unsigned long seccomp_mode) |
| { |
| assert_spin_locked(¤t->sighand->siglock); |
| |
| if (current->seccomp.mode && current->seccomp.mode != seccomp_mode) |
| return false; |
| |
| return true; |
| } |
| |
| void __weak arch_seccomp_spec_mitigate(struct task_struct *task) { } |
| |
| static inline void seccomp_assign_mode(struct task_struct *task, |
| unsigned long seccomp_mode, |
| unsigned long flags) |
| { |
| assert_spin_locked(&task->sighand->siglock); |
| |
| task->seccomp.mode = seccomp_mode; |
| /* |
| * Make sure SYSCALL_WORK_SECCOMP cannot be set before the mode (and |
| * filter) is set. |
| */ |
| smp_mb__before_atomic(); |
| /* Assume default seccomp processes want spec flaw mitigation. */ |
| if ((flags & SECCOMP_FILTER_FLAG_SPEC_ALLOW) == 0) |
| arch_seccomp_spec_mitigate(task); |
| set_task_syscall_work(task, SECCOMP); |
| } |
| |
| #ifdef CONFIG_SECCOMP_FILTER |
| /* Returns 1 if the parent is an ancestor of the child. */ |
| static int is_ancestor(struct seccomp_filter *parent, |
| struct seccomp_filter *child) |
| { |
| /* NULL is the root ancestor. */ |
| if (parent == NULL) |
| return 1; |
| for (; child; child = child->prev) |
| if (child == parent) |
| return 1; |
| return 0; |
| } |
| |
| /** |
| * seccomp_can_sync_threads: checks if all threads can be synchronized |
| * |
| * Expects sighand and cred_guard_mutex locks to be held. |
| * |
| * Returns 0 on success, -ve on error, or the pid of a thread which was |
| * either not in the correct seccomp mode or did not have an ancestral |
| * seccomp filter. |
| */ |
| static inline pid_t seccomp_can_sync_threads(void) |
| { |
| struct task_struct *thread, *caller; |
| |
| BUG_ON(!mutex_is_locked(¤t->signal->cred_guard_mutex)); |
| assert_spin_locked(¤t->sighand->siglock); |
| |
| /* Validate all threads being eligible for synchronization. */ |
| caller = current; |
| for_each_thread(caller, thread) { |
| pid_t failed; |
| |
| /* Skip current, since it is initiating the sync. */ |
| if (thread == caller) |
| continue; |
| |
| if (thread->seccomp.mode == SECCOMP_MODE_DISABLED || |
| (thread->seccomp.mode == SECCOMP_MODE_FILTER && |
| is_ancestor(thread->seccomp.filter, |
| caller->seccomp.filter))) |
| continue; |
| |
| /* Return the first thread that cannot be synchronized. */ |
| failed = task_pid_vnr(thread); |
| /* If the pid cannot be resolved, then return -ESRCH */ |
| if (WARN_ON(failed == 0)) |
| failed = -ESRCH; |
| return failed; |
| } |
| |
| return 0; |
| } |
| |
| static inline void seccomp_filter_free(struct seccomp_filter *filter) |
| { |
| if (filter) { |
| bpf_prog_destroy(filter->prog); |
| kfree(filter); |
| } |
| } |
| |
| static void __seccomp_filter_orphan(struct seccomp_filter *orig) |
| { |
| while (orig && refcount_dec_and_test(&orig->users)) { |
| if (waitqueue_active(&orig->wqh)) |
| wake_up_poll(&orig->wqh, EPOLLHUP); |
| orig = orig->prev; |
| } |
| } |
| |
| static void __put_seccomp_filter(struct seccomp_filter *orig) |
| { |
| /* Clean up single-reference branches iteratively. */ |
| while (orig && refcount_dec_and_test(&orig->refs)) { |
| struct seccomp_filter *freeme = orig; |
| orig = orig->prev; |
| seccomp_filter_free(freeme); |
| } |
| } |
| |
| static void __seccomp_filter_release(struct seccomp_filter *orig) |
| { |
| /* Notify about any unused filters in the task's former filter tree. */ |
| __seccomp_filter_orphan(orig); |
| /* Finally drop all references to the task's former tree. */ |
| __put_seccomp_filter(orig); |
| } |
| |
| /** |
| * seccomp_filter_release - Detach the task from its filter tree, |
| * drop its reference count, and notify |
| * about unused filters |
| * |
| * This function should only be called when the task is exiting as |
| * it detaches it from its filter tree. As such, READ_ONCE() and |
| * barriers are not needed here, as would normally be needed. |
| */ |
| void seccomp_filter_release(struct task_struct *tsk) |
| { |
| struct seccomp_filter *orig = tsk->seccomp.filter; |
| |
| /* We are effectively holding the siglock by not having any sighand. */ |
| WARN_ON(tsk->sighand != NULL); |
| |
| /* Detach task from its filter tree. */ |
| tsk->seccomp.filter = NULL; |
| __seccomp_filter_release(orig); |
| } |
| |
| /** |
| * seccomp_sync_threads: sets all threads to use current's filter |
| * |
| * Expects sighand and cred_guard_mutex locks to be held, and for |
| * seccomp_can_sync_threads() to have returned success already |
| * without dropping the locks. |
| * |
| */ |
| static inline void seccomp_sync_threads(unsigned long flags) |
| { |
| struct task_struct *thread, *caller; |
| |
| BUG_ON(!mutex_is_locked(¤t->signal->cred_guard_mutex)); |
| assert_spin_locked(¤t->sighand->siglock); |
| |
| /* Synchronize all threads. */ |
| caller = current; |
| for_each_thread(caller, thread) { |
| /* Skip current, since it needs no changes. */ |
| if (thread == caller) |
| continue; |
| |
| /* Get a task reference for the new leaf node. */ |
| get_seccomp_filter(caller); |
| |
| /* |
| * Drop the task reference to the shared ancestor since |
| * current's path will hold a reference. (This also |
| * allows a put before the assignment.) |
| */ |
| __seccomp_filter_release(thread->seccomp.filter); |
| |
| /* Make our new filter tree visible. */ |
| smp_store_release(&thread->seccomp.filter, |
| caller->seccomp.filter); |
| atomic_set(&thread->seccomp.filter_count, |
| atomic_read(&thread->seccomp.filter_count)); |
| |
| /* |
| * Don't let an unprivileged task work around |
| * the no_new_privs restriction by creating |
| * a thread that sets it up, enters seccomp, |
| * then dies. |
| */ |
| if (task_no_new_privs(caller)) |
| task_set_no_new_privs(thread); |
| |
| /* |
| * Opt the other thread into seccomp if needed. |
| * As threads are considered to be trust-realm |
| * equivalent (see ptrace_may_access), it is safe to |
| * allow one thread to transition the other. |
| */ |
| if (thread->seccomp.mode == SECCOMP_MODE_DISABLED) |
| seccomp_assign_mode(thread, SECCOMP_MODE_FILTER, |
| flags); |
| } |
| } |
| |
| /** |
| * seccomp_prepare_filter: Prepares a seccomp filter for use. |
| * @fprog: BPF program to install |
| * |
| * Returns filter on success or an ERR_PTR on failure. |
| */ |
| static struct seccomp_filter *seccomp_prepare_filter(struct sock_fprog *fprog) |
| { |
| struct seccomp_filter *sfilter; |
| int ret; |
| const bool save_orig = |
| #if defined(CONFIG_CHECKPOINT_RESTORE) || defined(SECCOMP_ARCH_NATIVE) |
| true; |
| #else |
| false; |
| #endif |
| |
| if (fprog->len == 0 || fprog->len > BPF_MAXINSNS) |
| return ERR_PTR(-EINVAL); |
| |
| BUG_ON(INT_MAX / fprog->len < sizeof(struct sock_filter)); |
| |
| /* |
| * Installing a seccomp filter requires that the task has |
| * CAP_SYS_ADMIN in its namespace or be running with no_new_privs. |
| * This avoids scenarios where unprivileged tasks can affect the |
| * behavior of privileged children. |
| */ |
| if (!task_no_new_privs(current) && |
| !ns_capable_noaudit(current_user_ns(), CAP_SYS_ADMIN)) |
| return ERR_PTR(-EACCES); |
| |
| /* Allocate a new seccomp_filter */ |
| sfilter = kzalloc(sizeof(*sfilter), GFP_KERNEL | __GFP_NOWARN); |
| if (!sfilter) |
| return ERR_PTR(-ENOMEM); |
| |
| mutex_init(&sfilter->notify_lock); |
| ret = bpf_prog_create_from_user(&sfilter->prog, fprog, |
| seccomp_check_filter, save_orig); |
| if (ret < 0) { |
| kfree(sfilter); |
| return ERR_PTR(ret); |
| } |
| |
| refcount_set(&sfilter->refs, 1); |
| refcount_set(&sfilter->users, 1); |
| init_waitqueue_head(&sfilter->wqh); |
| |
| return sfilter; |
| } |
| |
| /** |
| * seccomp_prepare_user_filter - prepares a user-supplied sock_fprog |
| * @user_filter: pointer to the user data containing a sock_fprog. |
| * |
| * Returns 0 on success and non-zero otherwise. |
| */ |
| static struct seccomp_filter * |
| seccomp_prepare_user_filter(const char __user *user_filter) |
| { |
| struct sock_fprog fprog; |
| struct seccomp_filter *filter = ERR_PTR(-EFAULT); |
| |
| #ifdef CONFIG_COMPAT |
| if (in_compat_syscall()) { |
| struct compat_sock_fprog fprog32; |
| if (copy_from_user(&fprog32, user_filter, sizeof(fprog32))) |
| goto out; |
| fprog.len = fprog32.len; |
| fprog.filter = compat_ptr(fprog32.filter); |
| } else /* falls through to the if below. */ |
| #endif |
| if (copy_from_user(&fprog, user_filter, sizeof(fprog))) |
| goto out; |
| filter = seccomp_prepare_filter(&fprog); |
| out: |
| return filter; |
| } |
| |
| #ifdef SECCOMP_ARCH_NATIVE |
| /** |
| * seccomp_is_const_allow - check if filter is constant allow with given data |
| * @fprog: The BPF programs |
| * @sd: The seccomp data to check against, only syscall number and arch |
| * number are considered constant. |
| */ |
| static bool seccomp_is_const_allow(struct sock_fprog_kern *fprog, |
| struct seccomp_data *sd) |
| { |
| unsigned int reg_value = 0; |
| unsigned int pc; |
| bool op_res; |
| |
| if (WARN_ON_ONCE(!fprog)) |
| return false; |
| |
| for (pc = 0; pc < fprog->len; pc++) { |
| struct sock_filter *insn = &fprog->filter[pc]; |
| u16 code = insn->code; |
| u32 k = insn->k; |
| |
| switch (code) { |
| case BPF_LD | BPF_W | BPF_ABS: |
| switch (k) { |
| case offsetof(struct seccomp_data, nr): |
| reg_value = sd->nr; |
| break; |
| case offsetof(struct seccomp_data, arch): |
| reg_value = sd->arch; |
| break; |
| default: |
| /* can't optimize (non-constant value load) */ |
| return false; |
| } |
| break; |
| case BPF_RET | BPF_K: |
| /* reached return with constant values only, check allow */ |
| return k == SECCOMP_RET_ALLOW; |
| case BPF_JMP | BPF_JA: |
| pc += insn->k; |
| break; |
| case BPF_JMP | BPF_JEQ | BPF_K: |
| case BPF_JMP | BPF_JGE | BPF_K: |
| case BPF_JMP | BPF_JGT | BPF_K: |
| case BPF_JMP | BPF_JSET | BPF_K: |
| switch (BPF_OP(code)) { |
| case BPF_JEQ: |
| op_res = reg_value == k; |
| break; |
| case BPF_JGE: |
| op_res = reg_value >= k; |
| break; |
| case BPF_JGT: |
| op_res = reg_value > k; |
| break; |
| case BPF_JSET: |
| op_res = !!(reg_value & k); |
| break; |
| default: |
| /* can't optimize (unknown jump) */ |
| return false; |
| } |
| |
| pc += op_res ? insn->jt : insn->jf; |
| break; |
| case BPF_ALU | BPF_AND | BPF_K: |
| reg_value &= k; |
| break; |
| default: |
| /* can't optimize (unknown insn) */ |
| return false; |
| } |
| } |
| |
| /* ran off the end of the filter?! */ |
| WARN_ON(1); |
| return false; |
| } |
| |
| static void seccomp_cache_prepare_bitmap(struct seccomp_filter *sfilter, |
| void *bitmap, const void *bitmap_prev, |
| size_t bitmap_size, int arch) |
| { |
| struct sock_fprog_kern *fprog = sfilter->prog->orig_prog; |
| struct seccomp_data sd; |
| int nr; |
| |
| if (bitmap_prev) { |
| /* The new filter must be as restrictive as the last. */ |
| bitmap_copy(bitmap, bitmap_prev, bitmap_size); |
| } else { |
| /* Before any filters, all syscalls are always allowed. */ |
| bitmap_fill(bitmap, bitmap_size); |
| } |
| |
| for (nr = 0; nr < bitmap_size; nr++) { |
| /* No bitmap change: not a cacheable action. */ |
| if (!test_bit(nr, bitmap)) |
| continue; |
| |
| sd.nr = nr; |
| sd.arch = arch; |
| |
| /* No bitmap change: continue to always allow. */ |
| if (seccomp_is_const_allow(fprog, &sd)) |
| continue; |
| |
| /* |
| * Not a cacheable action: always run filters. |
| * atomic clear_bit() not needed, filter not visible yet. |
| */ |
| __clear_bit(nr, bitmap); |
| } |
| } |
| |
| /** |
| * seccomp_cache_prepare - emulate the filter to find cacheable syscalls |
| * @sfilter: The seccomp filter |
| * |
| * Returns 0 if successful or -errno if error occurred. |
| */ |
| static void seccomp_cache_prepare(struct seccomp_filter *sfilter) |
| { |
| struct action_cache *cache = &sfilter->cache; |
| const struct action_cache *cache_prev = |
| sfilter->prev ? &sfilter->prev->cache : NULL; |
| |
| seccomp_cache_prepare_bitmap(sfilter, cache->allow_native, |
| cache_prev ? cache_prev->allow_native : NULL, |
| SECCOMP_ARCH_NATIVE_NR, |
| SECCOMP_ARCH_NATIVE); |
| |
| #ifdef SECCOMP_ARCH_COMPAT |
| seccomp_cache_prepare_bitmap(sfilter, cache->allow_compat, |
| cache_prev ? cache_prev->allow_compat : NULL, |
| SECCOMP_ARCH_COMPAT_NR, |
| SECCOMP_ARCH_COMPAT); |
| #endif /* SECCOMP_ARCH_COMPAT */ |
| } |
| #endif /* SECCOMP_ARCH_NATIVE */ |
| |
| /** |
| * seccomp_attach_filter: validate and attach filter |
| * @flags: flags to change filter behavior |
| * @filter: seccomp filter to add to the current process |
| * |
| * Caller must be holding current->sighand->siglock lock. |
| * |
| * Returns 0 on success, -ve on error, or |
| * - in TSYNC mode: the pid of a thread which was either not in the correct |
| * seccomp mode or did not have an ancestral seccomp filter |
| * - in NEW_LISTENER mode: the fd of the new listener |
| */ |
| static long seccomp_attach_filter(unsigned int flags, |
| struct seccomp_filter *filter) |
| { |
| unsigned long total_insns; |
| struct seccomp_filter *walker; |
| |
| assert_spin_locked(¤t->sighand->siglock); |
| |
| /* Validate resulting filter length. */ |
| total_insns = filter->prog->len; |
| for (walker = current->seccomp.filter; walker; walker = walker->prev) |
| total_insns += walker->prog->len + 4; /* 4 instr penalty */ |
| if (total_insns > MAX_INSNS_PER_PATH) |
| return -ENOMEM; |
| |
| /* If thread sync has been requested, check that it is possible. */ |
| if (flags & SECCOMP_FILTER_FLAG_TSYNC) { |
| int ret; |
| |
| ret = seccomp_can_sync_threads(); |
| if (ret) { |
| if (flags & SECCOMP_FILTER_FLAG_TSYNC_ESRCH) |
| return -ESRCH; |
| else |
| return ret; |
| } |
| } |
| |
| /* Set log flag, if present. */ |
| if (flags & SECCOMP_FILTER_FLAG_LOG) |
| filter->log = true; |
| |
| /* |
| * If there is an existing filter, make it the prev and don't drop its |
| * task reference. |
| */ |
| filter->prev = current->seccomp.filter; |
| seccomp_cache_prepare(filter); |
| current->seccomp.filter = filter; |
| atomic_inc(¤t->seccomp.filter_count); |
| |
| /* Now that the new filter is in place, synchronize to all threads. */ |
| if (flags & SECCOMP_FILTER_FLAG_TSYNC) |
| seccomp_sync_threads(flags); |
| |
| return 0; |
| } |
| |
| static void __get_seccomp_filter(struct seccomp_filter *filter) |
| { |
| refcount_inc(&filter->refs); |
| } |
| |
| /* get_seccomp_filter - increments the reference count of the filter on @tsk */ |
| void get_seccomp_filter(struct task_struct *tsk) |
| { |
| struct seccomp_filter *orig = tsk->seccomp.filter; |
| if (!orig) |
| return; |
| __get_seccomp_filter(orig); |
| refcount_inc(&orig->users); |
| } |
| |
| static void seccomp_init_siginfo(kernel_siginfo_t *info, int syscall, int reason) |
| { |
| clear_siginfo(info); |
| info->si_signo = SIGSYS; |
| info->si_code = SYS_SECCOMP; |
| info->si_call_addr = (void __user *)KSTK_EIP(current); |
| info->si_errno = reason; |
| info->si_arch = syscall_get_arch(current); |
| info->si_syscall = syscall; |
| } |
| |
| /** |
| * seccomp_send_sigsys - signals the task to allow in-process syscall emulation |
| * @syscall: syscall number to send to userland |
| * @reason: filter-supplied reason code to send to userland (via si_errno) |
| * |
| * Forces a SIGSYS with a code of SYS_SECCOMP and related sigsys info. |
| */ |
| static void seccomp_send_sigsys(int syscall, int reason) |
| { |
| struct kernel_siginfo info; |
| seccomp_init_siginfo(&info, syscall, reason); |
| force_sig_info(&info); |
| } |
| #endif /* CONFIG_SECCOMP_FILTER */ |
| |
| /* For use with seccomp_actions_logged */ |
| #define SECCOMP_LOG_KILL_PROCESS (1 << 0) |
| #define SECCOMP_LOG_KILL_THREAD (1 << 1) |
| #define SECCOMP_LOG_TRAP (1 << 2) |
| #define SECCOMP_LOG_ERRNO (1 << 3) |
| #define SECCOMP_LOG_TRACE (1 << 4) |
| #define SECCOMP_LOG_LOG (1 << 5) |
| #define SECCOMP_LOG_ALLOW (1 << 6) |
| #define SECCOMP_LOG_USER_NOTIF (1 << 7) |
| |
| static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_PROCESS | |
| SECCOMP_LOG_KILL_THREAD | |
| SECCOMP_LOG_TRAP | |
| SECCOMP_LOG_ERRNO | |
| SECCOMP_LOG_USER_NOTIF | |
| SECCOMP_LOG_TRACE | |
| SECCOMP_LOG_LOG; |
| |
| static inline void seccomp_log(unsigned long syscall, long signr, u32 action, |
| bool requested) |
| { |
| bool log = false; |
| |
| switch (action) { |
| case SECCOMP_RET_ALLOW: |
| break; |
| case SECCOMP_RET_TRAP: |
| log = requested && seccomp_actions_logged & SECCOMP_LOG_TRAP; |
| break; |
| case SECCOMP_RET_ERRNO: |
| log = requested && seccomp_actions_logged & SECCOMP_LOG_ERRNO; |
| break; |
| case SECCOMP_RET_TRACE: |
| log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE; |
| break; |
| case SECCOMP_RET_USER_NOTIF: |
| log = requested && seccomp_actions_logged & SECCOMP_LOG_USER_NOTIF; |
| break; |
| case SECCOMP_RET_LOG: |
| log = seccomp_actions_logged & SECCOMP_LOG_LOG; |
| break; |
| case SECCOMP_RET_KILL_THREAD: |
| log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD; |
| break; |
| case SECCOMP_RET_KILL_PROCESS: |
| default: |
| log = seccomp_actions_logged & SECCOMP_LOG_KILL_PROCESS; |
| } |
| |
| /* |
| * Emit an audit message when the action is RET_KILL_*, RET_LOG, or the |
| * FILTER_FLAG_LOG bit was set. The admin has the ability to silence |
| * any action from being logged by removing the action name from the |
| * seccomp_actions_logged sysctl. |
| */ |
| if (!log) |
| return; |
| |
| audit_seccomp(syscall, signr, action); |
| } |
| |
| /* |
| * Secure computing mode 1 allows only read/write/exit/sigreturn. |
| * To be fully secure this must be combined with rlimit |
| * to limit the stack allocations too. |
| */ |
| static const int mode1_syscalls[] = { |
| __NR_seccomp_read, __NR_seccomp_write, __NR_seccomp_exit, __NR_seccomp_sigreturn, |
| -1, /* negative terminated */ |
| }; |
| |
| static void __secure_computing_strict(int this_syscall) |
| { |
| const int *allowed_syscalls = mode1_syscalls; |
| #ifdef CONFIG_COMPAT |
| if (in_compat_syscall()) |
| allowed_syscalls = get_compat_mode1_syscalls(); |
| #endif |
| do { |
| if (*allowed_syscalls == this_syscall) |
| return; |
| } while (*++allowed_syscalls != -1); |
| |
| #ifdef SECCOMP_DEBUG |
| dump_stack(); |
| #endif |
| seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true); |
| do_exit(SIGKILL); |
| } |
| |
| #ifndef CONFIG_HAVE_ARCH_SECCOMP_FILTER |
| void secure_computing_strict(int this_syscall) |
| { |
| int mode = current->seccomp.mode; |
| |
| if (IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) && |
| unlikely(current->ptrace & PT_SUSPEND_SECCOMP)) |
| return; |
| |
| if (mode == SECCOMP_MODE_DISABLED) |
| return; |
| else if (mode == SECCOMP_MODE_STRICT) |
| __secure_computing_strict(this_syscall); |
| else |
| BUG(); |
| } |
| #else |
| |
| #ifdef CONFIG_SECCOMP_FILTER |
| static u64 seccomp_next_notify_id(struct seccomp_filter *filter) |
| { |
| /* |
| * Note: overflow is ok here, the id just needs to be unique per |
| * filter. |
| */ |
| lockdep_assert_held(&filter->notify_lock); |
| return filter->notif->next_id++; |
| } |
| |
| static void seccomp_handle_addfd(struct seccomp_kaddfd *addfd, struct seccomp_knotif *n) |
| { |
| int fd; |
| |
| /* |
| * Remove the notification, and reset the list pointers, indicating |
| * that it has been handled. |
| */ |
| list_del_init(&addfd->list); |
| if (!addfd->setfd) |
| fd = receive_fd(addfd->file, addfd->flags); |
| else |
| fd = receive_fd_replace(addfd->fd, addfd->file, addfd->flags); |
| addfd->ret = fd; |
| |
| if (addfd->ioctl_flags & SECCOMP_ADDFD_FLAG_SEND) { |
| /* If we fail reset and return an error to the notifier */ |
| if (fd < 0) { |
| n->state = SECCOMP_NOTIFY_SENT; |
| } else { |
| /* Return the FD we just added */ |
| n->flags = 0; |
| n->error = 0; |
| n->val = fd; |
| } |
| } |
| |
| /* |
| * Mark the notification as completed. From this point, addfd mem |
| * might be invalidated and we can't safely read it anymore. |
| */ |
| complete(&addfd->completion); |
| } |
| |
| static int seccomp_do_user_notification(int this_syscall, |
| struct seccomp_filter *match, |
| const struct seccomp_data *sd) |
| { |
| int err; |
| u32 flags = 0; |
| long ret = 0; |
| struct seccomp_knotif n = {}; |
| struct seccomp_kaddfd *addfd, *tmp; |
| |
| mutex_lock(&match->notify_lock); |
| err = -ENOSYS; |
| if (!match->notif) |
| goto out; |
| |
| n.task = current; |
| n.state = SECCOMP_NOTIFY_INIT; |
| n.data = sd; |
| n.id = seccomp_next_notify_id(match); |
| init_completion(&n.ready); |
| list_add(&n.list, &match->notif->notifications); |
| INIT_LIST_HEAD(&n.addfd); |
| |
| up(&match->notif->request); |
| wake_up_poll(&match->wqh, EPOLLIN | EPOLLRDNORM); |
| |
| /* |
| * This is where we wait for a reply from userspace. |
| */ |
| do { |
| mutex_unlock(&match->notify_lock); |
| err = wait_for_completion_interruptible(&n.ready); |
| mutex_lock(&match->notify_lock); |
| if (err != 0) |
| goto interrupted; |
| |
| addfd = list_first_entry_or_null(&n.addfd, |
| struct seccomp_kaddfd, list); |
| /* Check if we were woken up by a addfd message */ |
| if (addfd) |
| seccomp_handle_addfd(addfd, &n); |
| |
| } while (n.state != SECCOMP_NOTIFY_REPLIED); |
| |
| ret = n.val; |
| err = n.error; |
| flags = n.flags; |
| |
| interrupted: |
| /* If there were any pending addfd calls, clear them out */ |
| list_for_each_entry_safe(addfd, tmp, &n.addfd, list) { |
| /* The process went away before we got a chance to handle it */ |
| addfd->ret = -ESRCH; |
| list_del_init(&addfd->list); |
| complete(&addfd->completion); |
| } |
| |
| /* |
| * Note that it's possible the listener died in between the time when |
| * we were notified of a response (or a signal) and when we were able to |
| * re-acquire the lock, so only delete from the list if the |
| * notification actually exists. |
| * |
| * Also note that this test is only valid because there's no way to |
| * *reattach* to a notifier right now. If one is added, we'll need to |
| * keep track of the notif itself and make sure they match here. |
| */ |
| if (match->notif) |
| list_del(&n.list); |
| out: |
| mutex_unlock(&match->notify_lock); |
| |
| /* Userspace requests to continue the syscall. */ |
| if (flags & SECCOMP_USER_NOTIF_FLAG_CONTINUE) |
| return 0; |
| |
| syscall_set_return_value(current, current_pt_regs(), |
| err, ret); |
| return -1; |
| } |
| |
| static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, |
| const bool recheck_after_trace) |
| { |
| u32 filter_ret, action; |
| struct seccomp_filter *match = NULL; |
| int data; |
| struct seccomp_data sd_local; |
| |
| /* |
| * Make sure that any changes to mode from another thread have |
| * been seen after SYSCALL_WORK_SECCOMP was seen. |
| */ |
| smp_rmb(); |
| |
| if (!sd) { |
| populate_seccomp_data(&sd_local); |
| sd = &sd_local; |
| } |
| |
| filter_ret = seccomp_run_filters(sd, &match); |
| data = filter_ret & SECCOMP_RET_DATA; |
| action = filter_ret & SECCOMP_RET_ACTION_FULL; |
| |
| switch (action) { |
| case SECCOMP_RET_ERRNO: |
| /* Set low-order bits as an errno, capped at MAX_ERRNO. */ |
| if (data > MAX_ERRNO) |
| data = MAX_ERRNO; |
| syscall_set_return_value(current, current_pt_regs(), |
| -data, 0); |
| goto skip; |
| |
| case SECCOMP_RET_TRAP: |
| /* Show the handler the original registers. */ |
| syscall_rollback(current, current_pt_regs()); |
| /* Let the filter pass back 16 bits of data. */ |
| seccomp_send_sigsys(this_syscall, data); |
| goto skip; |
| |
| case SECCOMP_RET_TRACE: |
| /* We've been put in this state by the ptracer already. */ |
| if (recheck_after_trace) |
| return 0; |
| |
| /* ENOSYS these calls if there is no tracer attached. */ |
| if (!ptrace_event_enabled(current, PTRACE_EVENT_SECCOMP)) { |
| syscall_set_return_value(current, |
| current_pt_regs(), |
| -ENOSYS, 0); |
| goto skip; |
| } |
| |
| /* Allow the BPF to provide the event message */ |
| ptrace_event(PTRACE_EVENT_SECCOMP, data); |
| /* |
| * The delivery of a fatal signal during event |
| * notification may silently skip tracer notification, |
| * which could leave us with a potentially unmodified |
| * syscall that the tracer would have liked to have |
| * changed. Since the process is about to die, we just |
| * force the syscall to be skipped and let the signal |
| * kill the process and correctly handle any tracer exit |
| * notifications. |
| */ |
| if (fatal_signal_pending(current)) |
| goto skip; |
| /* Check if the tracer forced the syscall to be skipped. */ |
| this_syscall = syscall_get_nr(current, current_pt_regs()); |
| if (this_syscall < 0) |
| goto skip; |
| |
| /* |
| * Recheck the syscall, since it may have changed. This |
| * intentionally uses a NULL struct seccomp_data to force |
| * a reload of all registers. This does not goto skip since |
| * a skip would have already been reported. |
| */ |
| if (__seccomp_filter(this_syscall, NULL, true)) |
| return -1; |
| |
| return 0; |
| |
| case SECCOMP_RET_USER_NOTIF: |
| if (seccomp_do_user_notification(this_syscall, match, sd)) |
| goto skip; |
| |
| return 0; |
| |
| case SECCOMP_RET_LOG: |
| seccomp_log(this_syscall, 0, action, true); |
| return 0; |
| |
| case SECCOMP_RET_ALLOW: |
| /* |
| * Note that the "match" filter will always be NULL for |
| * this action since SECCOMP_RET_ALLOW is the starting |
| * state in seccomp_run_filters(). |
| */ |
| return 0; |
| |
| case SECCOMP_RET_KILL_THREAD: |
| case SECCOMP_RET_KILL_PROCESS: |
| default: |
| seccomp_log(this_syscall, SIGSYS, action, true); |
| /* Dump core only if this is the last remaining thread. */ |
| if (action != SECCOMP_RET_KILL_THREAD || |
| get_nr_threads(current) == 1) { |
| kernel_siginfo_t info; |
| |
| /* Show the original registers in the dump. */ |
| syscall_rollback(current, current_pt_regs()); |
| /* Trigger a manual coredump since do_exit skips it. */ |
| seccomp_init_siginfo(&info, this_syscall, data); |
| do_coredump(&info); |
| } |
| if (action == SECCOMP_RET_KILL_THREAD) |
| do_exit(SIGSYS); |
| else |
| do_group_exit(SIGSYS); |
| } |
| |
| unreachable(); |
| |
| skip: |
| seccomp_log(this_syscall, 0, action, match ? match->log : false); |
| return -1; |
| } |
| #else |
| static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, |
| const bool recheck_after_trace) |
| { |
| BUG(); |
| |
| return -1; |
| } |
| #endif |
| |
| int __secure_computing(const struct seccomp_data *sd) |
| { |
| int mode = current->seccomp.mode; |
| int this_syscall; |
| |
| if (IS_ENABLED(CONFIG_CHECKPOINT_RESTORE) && |
| unlikely(current->ptrace & PT_SUSPEND_SECCOMP)) |
| return 0; |
| |
| this_syscall = sd ? sd->nr : |
| syscall_get_nr(current, current_pt_regs()); |
| |
| switch (mode) { |
| case SECCOMP_MODE_STRICT: |
| __secure_computing_strict(this_syscall); /* may call do_exit */ |
| return 0; |
| case SECCOMP_MODE_FILTER: |
| return __seccomp_filter(this_syscall, sd, false); |
| default: |
| BUG(); |
| } |
| } |
| #endif /* CONFIG_HAVE_ARCH_SECCOMP_FILTER */ |
| |
| long prctl_get_seccomp(void) |
| { |
| return current->seccomp.mode; |
| } |
| |
| /** |
| * seccomp_set_mode_strict: internal function for setting strict seccomp |
| * |
| * Once current->seccomp.mode is non-zero, it may not be changed. |
| * |
| * Returns 0 on success or -EINVAL on failure. |
| */ |
| static long seccomp_set_mode_strict(void) |
| { |
| const unsigned long seccomp_mode = SECCOMP_MODE_STRICT; |
| long ret = -EINVAL; |
| |
| spin_lock_irq(¤t->sighand->siglock); |
| |
| if (!seccomp_may_assign_mode(seccomp_mode)) |
| goto out; |
| |
| #ifdef TIF_NOTSC |
| disable_TSC(); |
| #endif |
| seccomp_assign_mode(current, seccomp_mode, 0); |
| ret = 0; |
| |
| out: |
| spin_unlock_irq(¤t->sighand->siglock); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_SECCOMP_FILTER |
| static void seccomp_notify_free(struct seccomp_filter *filter) |
| { |
| kfree(filter->notif); |
| filter->notif = NULL; |
| } |
| |
| static void seccomp_notify_detach(struct seccomp_filter *filter) |
| { |
| struct seccomp_knotif *knotif; |
| |
| if (!filter) |
| return; |
| |
| mutex_lock(&filter->notify_lock); |
| |
| /* |
| * If this file is being closed because e.g. the task who owned it |
| * died, let's wake everyone up who was waiting on us. |
| */ |
| list_for_each_entry(knotif, &filter->notif->notifications, list) { |
| if (knotif->state == SECCOMP_NOTIFY_REPLIED) |
| continue; |
| |
| knotif->state = SECCOMP_NOTIFY_REPLIED; |
| knotif->error = -ENOSYS; |
| knotif->val = 0; |
| |
| /* |
| * We do not need to wake up any pending addfd messages, as |
| * the notifier will do that for us, as this just looks |
| * like a standard reply. |
| */ |
| complete(&knotif->ready); |
| } |
| |
| seccomp_notify_free(filter); |
| mutex_unlock(&filter->notify_lock); |
| } |
| |
| static int seccomp_notify_release(struct inode *inode, struct file *file) |
| { |
| struct seccomp_filter *filter = file->private_data; |
| |
| seccomp_notify_detach(filter); |
| __put_seccomp_filter(filter); |
| return 0; |
| } |
| |
| /* must be called with notif_lock held */ |
| static inline struct seccomp_knotif * |
| find_notification(struct seccomp_filter *filter, u64 id) |
| { |
| struct seccomp_knotif *cur; |
| |
| lockdep_assert_held(&filter->notify_lock); |
| |
| list_for_each_entry(cur, &filter->notif->notifications, list) { |
| if (cur->id == id) |
| return cur; |
| } |
| |
| return NULL; |
| } |
| |
| |
| static long seccomp_notify_recv(struct seccomp_filter *filter, |
| void __user *buf) |
| { |
| struct seccomp_knotif *knotif = NULL, *cur; |
| struct seccomp_notif unotif; |
| ssize_t ret; |
| |
| /* Verify that we're not given garbage to keep struct extensible. */ |
| ret = check_zeroed_user(buf, sizeof(unotif)); |
| if (ret < 0) |
| return ret; |
| if (!ret) |
| return -EINVAL; |
| |
| memset(&unotif, 0, sizeof(unotif)); |
| |
| ret = down_interruptible(&filter->notif->request); |
| if (ret < 0) |
| return ret; |
| |
| mutex_lock(&filter->notify_lock); |
| list_for_each_entry(cur, &filter->notif->notifications, list) { |
| if (cur->state == SECCOMP_NOTIFY_INIT) { |
| knotif = cur; |
| break; |
| } |
| } |
| |
| /* |
| * If we didn't find a notification, it could be that the task was |
| * interrupted by a fatal signal between the time we were woken and |
| * when we were able to acquire the rw lock. |
| */ |
| if (!knotif) { |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| unotif.id = knotif->id; |
| unotif.pid = task_pid_vnr(knotif->task); |
| unotif.data = *(knotif->data); |
| |
| knotif->state = SECCOMP_NOTIFY_SENT; |
| wake_up_poll(&filter->wqh, EPOLLOUT | EPOLLWRNORM); |
| ret = 0; |
| out: |
| mutex_unlock(&filter->notify_lock); |
| |
| if (ret == 0 && copy_to_user(buf, &unotif, sizeof(unotif))) { |
| ret = -EFAULT; |
| |
| /* |
| * Userspace screwed up. To make sure that we keep this |
| * notification alive, let's reset it back to INIT. It |
| * may have died when we released the lock, so we need to make |
| * sure it's still around. |
| */ |
| mutex_lock(&filter->notify_lock); |
| knotif = find_notification(filter, unotif.id); |
| if (knotif) { |
| knotif->state = SECCOMP_NOTIFY_INIT; |
| up(&filter->notif->request); |
| } |
| mutex_unlock(&filter->notify_lock); |
| } |
| |
| return ret; |
| } |
| |
| static long seccomp_notify_send(struct seccomp_filter *filter, |
| void __user *buf) |
| { |
| struct seccomp_notif_resp resp = {}; |
| struct seccomp_knotif *knotif; |
| long ret; |
| |
| if (copy_from_user(&resp, buf, sizeof(resp))) |
| return -EFAULT; |
| |
| if (resp.flags & ~SECCOMP_USER_NOTIF_FLAG_CONTINUE) |
| return -EINVAL; |
| |
| if ((resp.flags & SECCOMP_USER_NOTIF_FLAG_CONTINUE) && |
| (resp.error || resp.val)) |
| return -EINVAL; |
| |
| ret = mutex_lock_interruptible(&filter->notify_lock); |
| if (ret < 0) |
| return ret; |
| |
| knotif = find_notification(filter, resp.id); |
| if (!knotif) { |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| /* Allow exactly one reply. */ |
| if (knotif->state != SECCOMP_NOTIFY_SENT) { |
| ret = -EINPROGRESS; |
| goto out; |
| } |
| |
| ret = 0; |
| knotif->state = SECCOMP_NOTIFY_REPLIED; |
| knotif->error = resp.error; |
| knotif->val = resp.val; |
| knotif->flags = resp.flags; |
| complete(&knotif->ready); |
| out: |
| mutex_unlock(&filter->notify_lock); |
| return ret; |
| } |
| |
| static long seccomp_notify_id_valid(struct seccomp_filter *filter, |
| void __user *buf) |
| { |
| struct seccomp_knotif *knotif; |
| u64 id; |
| long ret; |
| |
| if (copy_from_user(&id, buf, sizeof(id))) |
| return -EFAULT; |
| |
| ret = mutex_lock_interruptible(&filter->notify_lock); |
| if (ret < 0) |
| return ret; |
| |
| knotif = find_notification(filter, id); |
| if (knotif && knotif->state == SECCOMP_NOTIFY_SENT) |
| ret = 0; |
| else |
| ret = -ENOENT; |
| |
| mutex_unlock(&filter->notify_lock); |
| return ret; |
| } |
| |
| static long seccomp_notify_addfd(struct seccomp_filter *filter, |
| struct seccomp_notif_addfd __user *uaddfd, |
| unsigned int size) |
| { |
| struct seccomp_notif_addfd addfd; |
| struct seccomp_knotif *knotif; |
| struct seccomp_kaddfd kaddfd; |
| int ret; |
| |
| BUILD_BUG_ON(sizeof(addfd) < SECCOMP_NOTIFY_ADDFD_SIZE_VER0); |
| BUILD_BUG_ON(sizeof(addfd) != SECCOMP_NOTIFY_ADDFD_SIZE_LATEST); |
| |
| if (size < SECCOMP_NOTIFY_ADDFD_SIZE_VER0 || size >= PAGE_SIZE) |
| return -EINVAL; |
| |
| ret = copy_struct_from_user(&addfd, sizeof(addfd), uaddfd, size); |
| if (ret) |
| return ret; |
| |
| if (addfd.newfd_flags & ~O_CLOEXEC) |
| return -EINVAL; |
| |
| if (addfd.flags & ~(SECCOMP_ADDFD_FLAG_SETFD | SECCOMP_ADDFD_FLAG_SEND)) |
| return -EINVAL; |
| |
| if (addfd.newfd && !(addfd.flags & SECCOMP_ADDFD_FLAG_SETFD)) |
| return -EINVAL; |
| |
| kaddfd.file = fget(addfd.srcfd); |
| if (!kaddfd.file) |
| return -EBADF; |
| |
| kaddfd.ioctl_flags = addfd.flags; |
| kaddfd.flags = addfd.newfd_flags; |
| kaddfd.setfd = addfd.flags & SECCOMP_ADDFD_FLAG_SETFD; |
| kaddfd.fd = addfd.newfd; |
| init_completion(&kaddfd.completion); |
| |
| ret = mutex_lock_interruptible(&filter->notify_lock); |
| if (ret < 0) |
| goto out; |
| |
| knotif = find_notification(filter, addfd.id); |
| if (!knotif) { |
| ret = -ENOENT; |
| goto out_unlock; |
| } |
| |
| /* |
| * We do not want to allow for FD injection to occur before the |
| * notification has been picked up by a userspace handler, or after |
| * the notification has been replied to. |
| */ |
| if (knotif->state != SECCOMP_NOTIFY_SENT) { |
| ret = -EINPROGRESS; |
| goto out_unlock; |
| } |
| |
| if (addfd.flags & SECCOMP_ADDFD_FLAG_SEND) { |
| /* |
| * Disallow queuing an atomic addfd + send reply while there are |
| * some addfd requests still to process. |
| * |
| * There is no clear reason to support it and allows us to keep |
| * the loop on the other side straight-forward. |
| */ |
| if (!list_empty(&knotif->addfd)) { |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| |
| /* Allow exactly only one reply */ |
| knotif->state = SECCOMP_NOTIFY_REPLIED; |
| } |
| |
| list_add(&kaddfd.list, &knotif->addfd); |
| complete(&knotif->ready); |
| mutex_unlock(&filter->notify_lock); |
| |
| /* Now we wait for it to be processed or be interrupted */ |
| ret = wait_for_completion_interruptible(&kaddfd.completion); |
| if (ret == 0) { |
| /* |
| * We had a successful completion. The other side has already |
| * removed us from the addfd queue, and |
| * wait_for_completion_interruptible has a memory barrier upon |
| * success that lets us read this value directly without |
| * locking. |
| */ |
| ret = kaddfd.ret; |
| goto out; |
| } |
| |
| mutex_lock(&filter->notify_lock); |
| /* |
| * Even though we were woken up by a signal and not a successful |
| * completion, a completion may have happened in the mean time. |
| * |
| * We need to check again if the addfd request has been handled, |
| * and if not, we will remove it from the queue. |
| */ |
| if (list_empty(&kaddfd.list)) |
| ret = kaddfd.ret; |
| else |
| list_del(&kaddfd.list); |
| |
| out_unlock: |
| mutex_unlock(&filter->notify_lock); |
| out: |
| fput(kaddfd.file); |
| |
| return ret; |
| } |
| |
| static long seccomp_notify_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct seccomp_filter *filter = file->private_data; |
| void __user *buf = (void __user *)arg; |
| |
| /* Fixed-size ioctls */ |
| switch (cmd) { |
| case SECCOMP_IOCTL_NOTIF_RECV: |
| return seccomp_notify_recv(filter, buf); |
| case SECCOMP_IOCTL_NOTIF_SEND: |
| return seccomp_notify_send(filter, buf); |
| case SECCOMP_IOCTL_NOTIF_ID_VALID_WRONG_DIR: |
| case SECCOMP_IOCTL_NOTIF_ID_VALID: |
| return seccomp_notify_id_valid(filter, buf); |
| } |
| |
| /* Extensible Argument ioctls */ |
| #define EA_IOCTL(cmd) ((cmd) & ~(IOC_INOUT | IOCSIZE_MASK)) |
| switch (EA_IOCTL(cmd)) { |
| case EA_IOCTL(SECCOMP_IOCTL_NOTIF_ADDFD): |
| return seccomp_notify_addfd(filter, buf, _IOC_SIZE(cmd)); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static __poll_t seccomp_notify_poll(struct file *file, |
| struct poll_table_struct *poll_tab) |
| { |
| struct seccomp_filter *filter = file->private_data; |
| __poll_t ret = 0; |
| struct seccomp_knotif *cur; |
| |
| poll_wait(file, &filter->wqh, poll_tab); |
| |
| if (mutex_lock_interruptible(&filter->notify_lock) < 0) |
| return EPOLLERR; |
| |
| list_for_each_entry(cur, &filter->notif->notifications, list) { |
| if (cur->state == SECCOMP_NOTIFY_INIT) |
| ret |= EPOLLIN | EPOLLRDNORM; |
| if (cur->state == SECCOMP_NOTIFY_SENT) |
| ret |= EPOLLOUT | EPOLLWRNORM; |
| if ((ret & EPOLLIN) && (ret & EPOLLOUT)) |
| break; |
| } |
| |
| mutex_unlock(&filter->notify_lock); |
| |
| if (refcount_read(&filter->users) == 0) |
| ret |= EPOLLHUP; |
| |
| return ret; |
| } |
| |
| static const struct file_operations seccomp_notify_ops = { |
| .poll = seccomp_notify_poll, |
| .release = seccomp_notify_release, |
| .unlocked_ioctl = seccomp_notify_ioctl, |
| .compat_ioctl = seccomp_notify_ioctl, |
| }; |
| |
| static struct file *init_listener(struct seccomp_filter *filter) |
| { |
| struct file *ret; |
| |
| ret = ERR_PTR(-ENOMEM); |
| filter->notif = kzalloc(sizeof(*(filter->notif)), GFP_KERNEL); |
| if (!filter->notif) |
| goto out; |
| |
| sema_init(&filter->notif->request, 0); |
| filter->notif->next_id = get_random_u64(); |
| INIT_LIST_HEAD(&filter->notif->notifications); |
| |
| ret = anon_inode_getfile("seccomp notify", &seccomp_notify_ops, |
| filter, O_RDWR); |
| if (IS_ERR(ret)) |
| goto out_notif; |
| |
| /* The file has a reference to it now */ |
| __get_seccomp_filter(filter); |
| |
| out_notif: |
| if (IS_ERR(ret)) |
| seccomp_notify_free(filter); |
| out: |
| return ret; |
| } |
| |
| /* |
| * Does @new_child have a listener while an ancestor also has a listener? |
| * If so, we'll want to reject this filter. |
| * This only has to be tested for the current process, even in the TSYNC case, |
| * because TSYNC installs @child with the same parent on all threads. |
| * Note that @new_child is not hooked up to its parent at this point yet, so |
| * we use current->seccomp.filter. |
| */ |
| static bool has_duplicate_listener(struct seccomp_filter *new_child) |
| { |
| struct seccomp_filter *cur; |
| |
| /* must be protected against concurrent TSYNC */ |
| lockdep_assert_held(¤t->sighand->siglock); |
| |
| if (!new_child->notif) |
| return false; |
| for (cur = current->seccomp.filter; cur; cur = cur->prev) { |
| if (cur->notif) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| /** |
| * seccomp_set_mode_filter: internal function for setting seccomp filter |
| * @flags: flags to change filter behavior |
| * @filter: struct sock_fprog containing filter |
| * |
| * This function may be called repeatedly to install additional filters. |
| * Every filter successfully installed will be evaluated (in reverse order) |
| * for each system call the task makes. |
| * |
| * Once current->seccomp.mode is non-zero, it may not be changed. |
| * |
| * Returns 0 on success or -EINVAL on failure. |
| */ |
| static long seccomp_set_mode_filter(unsigned int flags, |
| const char __user *filter) |
| { |
| const unsigned long seccomp_mode = SECCOMP_MODE_FILTER; |
| struct seccomp_filter *prepared = NULL; |
| long ret = -EINVAL; |
| int listener = -1; |
| struct file *listener_f = NULL; |
| |
| /* Validate flags. */ |
| if (flags & ~SECCOMP_FILTER_FLAG_MASK) |
| return -EINVAL; |
| |
| /* |
| * In the successful case, NEW_LISTENER returns the new listener fd. |
| * But in the failure case, TSYNC returns the thread that died. If you |
| * combine these two flags, there's no way to tell whether something |
| * succeeded or failed. So, let's disallow this combination if the user |
| * has not explicitly requested no errors from TSYNC. |
| */ |
| if ((flags & SECCOMP_FILTER_FLAG_TSYNC) && |
| (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) && |
| ((flags & SECCOMP_FILTER_FLAG_TSYNC_ESRCH) == 0)) |
| return -EINVAL; |
| |
| /* Prepare the new filter before holding any locks. */ |
| prepared = seccomp_prepare_user_filter(filter); |
| if (IS_ERR(prepared)) |
| return PTR_ERR(prepared); |
| |
| if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { |
| listener = get_unused_fd_flags(O_CLOEXEC); |
| if (listener < 0) { |
| ret = listener; |
| goto out_free; |
| } |
| |
| listener_f = init_listener(prepared); |
| if (IS_ERR(listener_f)) { |
| put_unused_fd(listener); |
| ret = PTR_ERR(listener_f); |
| goto out_free; |
| } |
| } |
| |
| /* |
| * Make sure we cannot change seccomp or nnp state via TSYNC |
| * while another thread is in the middle of calling exec. |
| */ |
| if (flags & SECCOMP_FILTER_FLAG_TSYNC && |
| mutex_lock_killable(¤t->signal->cred_guard_mutex)) |
| goto out_put_fd; |
| |
| spin_lock_irq(¤t->sighand->siglock); |
| |
| if (!seccomp_may_assign_mode(seccomp_mode)) |
| goto out; |
| |
| if (has_duplicate_listener(prepared)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ret = seccomp_attach_filter(flags, prepared); |
| if (ret) |
| goto out; |
| /* Do not free the successfully attached filter. */ |
| prepared = NULL; |
| |
| seccomp_assign_mode(current, seccomp_mode, flags); |
| out: |
| spin_unlock_irq(¤t->sighand->siglock); |
| if (flags & SECCOMP_FILTER_FLAG_TSYNC) |
| mutex_unlock(¤t->signal->cred_guard_mutex); |
| out_put_fd: |
| if (flags & SECCOMP_FILTER_FLAG_NEW_LISTENER) { |
| if (ret) { |
| listener_f->private_data = NULL; |
| fput(listener_f); |
| put_unused_fd(listener); |
| seccomp_notify_detach(prepared); |
| } else { |
| fd_install(listener, listener_f); |
| ret = listener; |
| } |
| } |
| out_free: |
| seccomp_filter_free(prepared); |
| return ret; |
| } |
| #else |
| static inline long seccomp_set_mode_filter(unsigned int flags, |
| const char __user *filter) |
| { |
| return -EINVAL; |
| } |
| #endif |
| |
| static long seccomp_get_action_avail(const char __user *uaction) |
| { |
| u32 action; |
| |
| if (copy_from_user(&action, uaction, sizeof(action))) |
| return -EFAULT; |
| |
| switch (action) { |
| case SECCOMP_RET_KILL_PROCESS: |
| case SECCOMP_RET_KILL_THREAD: |
| case SECCOMP_RET_TRAP: |
| case SECCOMP_RET_ERRNO: |
| case SECCOMP_RET_USER_NOTIF: |
| case SECCOMP_RET_TRACE: |
| case SECCOMP_RET_LOG: |
| case SECCOMP_RET_ALLOW: |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static long seccomp_get_notif_sizes(void __user *usizes) |
| { |
| struct seccomp_notif_sizes sizes = { |
| .seccomp_notif = sizeof(struct seccomp_notif), |
| .seccomp_notif_resp = sizeof(struct seccomp_notif_resp), |
| .seccomp_data = sizeof(struct seccomp_data), |
| }; |
| |
| if (copy_to_user(usizes, &sizes, sizeof(sizes))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| /* Common entry point for both prctl and syscall. */ |
| static long do_seccomp(unsigned int op, unsigned int flags, |
| void __user *uargs) |
| { |
| switch (op) { |
| case SECCOMP_SET_MODE_STRICT: |
| if (flags != 0 || uargs != NULL) |
| return -EINVAL; |
| return seccomp_set_mode_strict(); |
| case SECCOMP_SET_MODE_FILTER: |
| return seccomp_set_mode_filter(flags, uargs); |
| case SECCOMP_GET_ACTION_AVAIL: |
| if (flags != 0) |
| return -EINVAL; |
| |
| return seccomp_get_action_avail(uargs); |
| case SECCOMP_GET_NOTIF_SIZES: |
| if (flags != 0) |
| return -EINVAL; |
| |
| return seccomp_get_notif_sizes(uargs); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| SYSCALL_DEFINE3(seccomp, unsigned int, op, unsigned int, flags, |
| void __user *, uargs) |
| { |
| return do_seccomp(op, flags, uargs); |
| } |
| |
| /** |
| * prctl_set_seccomp: configures current->seccomp.mode |
| * @seccomp_mode: requested mode to use |
| * @filter: optional struct sock_fprog for use with SECCOMP_MODE_FILTER |
| * |
| * Returns 0 on success or -EINVAL on failure. |
| */ |
| long prctl_set_seccomp(unsigned long seccomp_mode, void __user *filter) |
| { |
| unsigned int op; |
| void __user *uargs; |
| |
| switch (seccomp_mode) { |
| case SECCOMP_MODE_STRICT: |
| op = SECCOMP_SET_MODE_STRICT; |
| /* |
| * Setting strict mode through prctl always ignored filter, |
| * so make sure it is always NULL here to pass the internal |
| * check in do_seccomp(). |
| */ |
| uargs = NULL; |
| break; |
| case SECCOMP_MODE_FILTER: |
| op = SECCOMP_SET_MODE_FILTER; |
| uargs = filter; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* prctl interface doesn't have flags, so they are always zero. */ |
| return do_seccomp(op, 0, uargs); |
| } |
| |
| #if defined(CONFIG_SECCOMP_FILTER) && defined(CONFIG_CHECKPOINT_RESTORE) |
| static struct seccomp_filter *get_nth_filter(struct task_struct *task, |
| unsigned long filter_off) |
| { |
| struct seccomp_filter *orig, *filter; |
| unsigned long count; |
| |
| /* |
| * Note: this is only correct because the caller should be the (ptrace) |
| * tracer of the task, otherwise lock_task_sighand is needed. |
| */ |
| spin_lock_irq(&task->sighand->siglock); |
| |
| if (task->seccomp.mode != SECCOMP_MODE_FILTER) { |
| spin_unlock_irq(&task->sighand->siglock); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| orig = task->seccomp.filter; |
| __get_seccomp_filter(orig); |
| spin_unlock_irq(&task->sighand->siglock); |
| |
| count = 0; |
| for (filter = orig; filter; filter = filter->prev) |
| count++; |
| |
| if (filter_off >= count) { |
| filter = ERR_PTR(-ENOENT); |
| goto out; |
| } |
| |
| count -= filter_off; |
| for (filter = orig; filter && count > 1; filter = filter->prev) |
| count--; |
| |
| if (WARN_ON(count != 1 || !filter)) { |
| filter = ERR_PTR(-ENOENT); |
| goto out; |
| } |
| |
| __get_seccomp_filter(filter); |
| |
| out: |
| __put_seccomp_filter(orig); |
| return filter; |
| } |
| |
| long seccomp_get_filter(struct task_struct *task, unsigned long filter_off, |
| void __user *data) |
| { |
| struct seccomp_filter *filter; |
| struct sock_fprog_kern *fprog; |
| long ret; |
| |
| if (!capable(CAP_SYS_ADMIN) || |
| current->seccomp.mode != SECCOMP_MODE_DISABLED) { |
| return -EACCES; |
| } |
| |
| filter = get_nth_filter(task, filter_off); |
| if (IS_ERR(filter)) |
| return PTR_ERR(filter); |
| |
| fprog = filter->prog->orig_prog; |
| if (!fprog) { |
| /* This must be a new non-cBPF filter, since we save |
| * every cBPF filter's orig_prog above when |
| * CONFIG_CHECKPOINT_RESTORE is enabled. |
| */ |
| ret = -EMEDIUMTYPE; |
| goto out; |
| } |
| |
| ret = fprog->len; |
| if (!data) |
| goto out; |
| |
| if (copy_to_user(data, fprog->filter, bpf_classic_proglen(fprog))) |
| ret = -EFAULT; |
| |
| out: |
| __put_seccomp_filter(filter); |
| return ret; |
| } |
| |
| long seccomp_get_metadata(struct task_struct *task, |
| unsigned long size, void __user *data) |
| { |
| long ret; |
| struct seccomp_filter *filter; |
| struct seccomp_metadata kmd = {}; |
| |
| if (!capable(CAP_SYS_ADMIN) || |
| current->seccomp.mode != SECCOMP_MODE_DISABLED) { |
| return -EACCES; |
| } |
| |
| size = min_t(unsigned long, size, sizeof(kmd)); |
| |
| if (size < sizeof(kmd.filter_off)) |
| return -EINVAL; |
| |
| if (copy_from_user(&kmd.filter_off, data, sizeof(kmd.filter_off))) |
| return -EFAULT; |
| |
| filter = get_nth_filter(task, kmd.filter_off); |
| if (IS_ERR(filter)) |
| return PTR_ERR(filter); |
| |
| if (filter->log) |
| kmd.flags |= SECCOMP_FILTER_FLAG_LOG; |
| |
| ret = size; |
| if (copy_to_user(data, &kmd, size)) |
| ret = -EFAULT; |
| |
| __put_seccomp_filter(filter); |
| return ret; |
| } |
| #endif |
| |
| #ifdef CONFIG_SYSCTL |
| |
| /* Human readable action names for friendly sysctl interaction */ |
| #define SECCOMP_RET_KILL_PROCESS_NAME "kill_process" |
| #define SECCOMP_RET_KILL_THREAD_NAME "kill_thread" |
| #define SECCOMP_RET_TRAP_NAME "trap" |
| #define SECCOMP_RET_ERRNO_NAME "errno" |
| #define SECCOMP_RET_USER_NOTIF_NAME "user_notif" |
| #define SECCOMP_RET_TRACE_NAME "trace" |
| #define SECCOMP_RET_LOG_NAME "log" |
| #define SECCOMP_RET_ALLOW_NAME "allow" |
| |
| static const char seccomp_actions_avail[] = |
| SECCOMP_RET_KILL_PROCESS_NAME " " |
| SECCOMP_RET_KILL_THREAD_NAME " " |
| SECCOMP_RET_TRAP_NAME " " |
| SECCOMP_RET_ERRNO_NAME " " |
| SECCOMP_RET_USER_NOTIF_NAME " " |
| SECCOMP_RET_TRACE_NAME " " |
| SECCOMP_RET_LOG_NAME " " |
| SECCOMP_RET_ALLOW_NAME; |
| |
| struct seccomp_log_name { |
| u32 log; |
| const char *name; |
| }; |
| |
| static const struct seccomp_log_name seccomp_log_names[] = { |
| { SECCOMP_LOG_KILL_PROCESS, SECCOMP_RET_KILL_PROCESS_NAME }, |
| { SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME }, |
| { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, |
| { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, |
| { SECCOMP_LOG_USER_NOTIF, SECCOMP_RET_USER_NOTIF_NAME }, |
| { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, |
| { SECCOMP_LOG_LOG, SECCOMP_RET_LOG_NAME }, |
| { SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME }, |
| { } |
| }; |
| |
| static bool seccomp_names_from_actions_logged(char *names, size_t size, |
| u32 actions_logged, |
| const char *sep) |
| { |
| const struct seccomp_log_name *cur; |
| bool append_sep = false; |
| |
| for (cur = seccomp_log_names; cur->name && size; cur++) { |
| ssize_t ret; |
| |
| if (!(actions_logged & cur->log)) |
| continue; |
| |
| if (append_sep) { |
| ret = strscpy(names, sep, size); |
| if (ret < 0) |
| return false; |
| |
| names += ret; |
| size -= ret; |
| } else |
| append_sep = true; |
| |
| ret = strscpy(names, cur->name, size); |
| if (ret < 0) |
| return false; |
| |
| names += ret; |
| size -= ret; |
| } |
| |
| return true; |
| } |
| |
| static bool seccomp_action_logged_from_name(u32 *action_logged, |
| const char *name) |
| { |
| const struct seccomp_log_name *cur; |
| |
| for (cur = seccomp_log_names; cur->name; cur++) { |
| if (!strcmp(cur->name, name)) { |
| *action_logged = cur->log; |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static bool seccomp_actions_logged_from_names(u32 *actions_logged, char *names) |
| { |
| char *name; |
| |
| *actions_logged = 0; |
| while ((name = strsep(&names, " ")) && *name) { |
| u32 action_logged = 0; |
| |
| if (!seccomp_action_logged_from_name(&action_logged, name)) |
| return false; |
| |
| *actions_logged |= action_logged; |
| } |
| |
| return true; |
| } |
| |
| static int read_actions_logged(struct ctl_table *ro_table, void *buffer, |
| size_t *lenp, loff_t *ppos) |
| { |
| char names[sizeof(seccomp_actions_avail)]; |
| struct ctl_table table; |
| |
| memset(names, 0, sizeof(names)); |
| |
| if (!seccomp_names_from_actions_logged(names, sizeof(names), |
| seccomp_actions_logged, " ")) |
| return -EINVAL; |
| |
| table = *ro_table; |
| table.data = names; |
| table.maxlen = sizeof(names); |
| return proc_dostring(&table, 0, buffer, lenp, ppos); |
| } |
| |
| static int write_actions_logged(struct ctl_table *ro_table, void *buffer, |
| size_t *lenp, loff_t *ppos, u32 *actions_logged) |
| { |
| char names[sizeof(seccomp_actions_avail)]; |
| struct ctl_table table; |
| int ret; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| memset(names, 0, sizeof(names)); |
| |
| table = *ro_table; |
| table.data = names; |
| table.maxlen = sizeof(names); |
| ret = proc_dostring(&table, 1, buffer, lenp, ppos); |
| if (ret) |
| return ret; |
| |
| if (!seccomp_actions_logged_from_names(actions_logged, table.data)) |
| return -EINVAL; |
| |
| if (*actions_logged & SECCOMP_LOG_ALLOW) |
| return -EINVAL; |
| |
| seccomp_actions_logged = *actions_logged; |
| return 0; |
| } |
| |
| static void audit_actions_logged(u32 actions_logged, u32 old_actions_logged, |
| int ret) |
| { |
| char names[sizeof(seccomp_actions_avail)]; |
| char old_names[sizeof(seccomp_actions_avail)]; |
| const char *new = names; |
| const char *old = old_names; |
| |
| if (!audit_enabled) |
| return; |
| |
| memset(names, 0, sizeof(names)); |
| memset(old_names, 0, sizeof(old_names)); |
| |
| if (ret) |
| new = "?"; |
| else if (!actions_logged) |
| new = "(none)"; |
| else if (!seccomp_names_from_actions_logged(names, sizeof(names), |
| actions_logged, ",")) |
| new = "?"; |
| |
| if (!old_actions_logged) |
| old = "(none)"; |
| else if (!seccomp_names_from_actions_logged(old_names, |
| sizeof(old_names), |
| old_actions_logged, ",")) |
| old = "?"; |
| |
| return audit_seccomp_actions_logged(new, old, !ret); |
| } |
| |
| static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write, |
| void *buffer, size_t *lenp, |
| loff_t *ppos) |
| { |
| int ret; |
| |
| if (write) { |
| u32 actions_logged = 0; |
| u32 old_actions_logged = seccomp_actions_logged; |
| |
| ret = write_actions_logged(ro_table, buffer, lenp, ppos, |
| &actions_logged); |
| audit_actions_logged(actions_logged, old_actions_logged, ret); |
| } else |
| ret = read_actions_logged(ro_table, buffer, lenp, ppos); |
| |
| return ret; |
| } |
| |
| static struct ctl_path seccomp_sysctl_path[] = { |
| { .procname = "kernel", }, |
| { .procname = "seccomp", }, |
| { } |
| }; |
| |
| static struct ctl_table seccomp_sysctl_table[] = { |
| { |
| .procname = "actions_avail", |
| .data = (void *) &seccomp_actions_avail, |
| .maxlen = sizeof(seccomp_actions_avail), |
| .mode = 0444, |
| .proc_handler = proc_dostring, |
| }, |
| { |
| .procname = "actions_logged", |
| .mode = 0644, |
| .proc_handler = seccomp_actions_logged_handler, |
| }, |
| { } |
| }; |
| |
| static int __init seccomp_sysctl_init(void) |
| { |
| struct ctl_table_header *hdr; |
| |
| hdr = register_sysctl_paths(seccomp_sysctl_path, seccomp_sysctl_table); |
| if (!hdr) |
| pr_warn("sysctl registration failed\n"); |
| else |
| kmemleak_not_leak(hdr); |
| |
| return 0; |
| } |
| |
| device_initcall(seccomp_sysctl_init) |
| |
| #endif /* CONFIG_SYSCTL */ |
| |
| #ifdef CONFIG_SECCOMP_CACHE_DEBUG |
| /* Currently CONFIG_SECCOMP_CACHE_DEBUG implies SECCOMP_ARCH_NATIVE */ |
| static void proc_pid_seccomp_cache_arch(struct seq_file *m, const char *name, |
| const void *bitmap, size_t bitmap_size) |
| { |
| int nr; |
| |
| for (nr = 0; nr < bitmap_size; nr++) { |
| bool cached = test_bit(nr, bitmap); |
| char *status = cached ? "ALLOW" : "FILTER"; |
| |
| seq_printf(m, "%s %d %s\n", name, nr, status); |
| } |
| } |
| |
| int proc_pid_seccomp_cache(struct seq_file *m, struct pid_namespace *ns, |
| struct pid *pid, struct task_struct *task) |
| { |
| struct seccomp_filter *f; |
| unsigned long flags; |
| |
| /* |
| * We don't want some sandboxed process to know what their seccomp |
| * filters consist of. |
| */ |
| if (!file_ns_capable(m->file, &init_user_ns, CAP_SYS_ADMIN)) |
| return -EACCES; |
| |
| if (!lock_task_sighand(task, &flags)) |
| return -ESRCH; |
| |
| f = READ_ONCE(task->seccomp.filter); |
| if (!f) { |
| unlock_task_sighand(task, &flags); |
| return 0; |
| } |
| |
| /* prevent filter from being freed while we are printing it */ |
| __get_seccomp_filter(f); |
| unlock_task_sighand(task, &flags); |
| |
| proc_pid_seccomp_cache_arch(m, SECCOMP_ARCH_NATIVE_NAME, |
| f->cache.allow_native, |
| SECCOMP_ARCH_NATIVE_NR); |
| |
| #ifdef SECCOMP_ARCH_COMPAT |
| proc_pid_seccomp_cache_arch(m, SECCOMP_ARCH_COMPAT_NAME, |
| f->cache.allow_compat, |
| SECCOMP_ARCH_COMPAT_NR); |
| #endif /* SECCOMP_ARCH_COMPAT */ |
| |
| __put_seccomp_filter(f); |
| return 0; |
| } |
| #endif /* CONFIG_SECCOMP_CACHE_DEBUG */ |