| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2014-2016 IBM Corp. |
| */ |
| |
| #include <linux/module.h> |
| #include <misc/cxl-base.h> |
| #include <asm/pnv-pci.h> |
| #include <asm/opal.h> |
| |
| #include "pci.h" |
| |
| int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| struct pnv_ioda_pe *pe; |
| int rc; |
| |
| pe = pnv_ioda_get_pe(dev); |
| if (!pe) |
| return -ENODEV; |
| |
| pe_info(pe, "Switching PHB to CXL\n"); |
| |
| rc = opal_pci_set_phb_cxl_mode(phb->opal_id, mode, pe->pe_number); |
| if (rc == OPAL_UNSUPPORTED) |
| dev_err(&dev->dev, "Required cxl mode not supported by firmware - update skiboot\n"); |
| else if (rc) |
| dev_err(&dev->dev, "opal_pci_set_phb_cxl_mode failed: %i\n", rc); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL(pnv_phb_to_cxl_mode); |
| |
| /* Find PHB for cxl dev and allocate MSI hwirqs? |
| * Returns the absolute hardware IRQ number |
| */ |
| int pnv_cxl_alloc_hwirqs(struct pci_dev *dev, int num) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| int hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, num); |
| |
| if (hwirq < 0) { |
| dev_warn(&dev->dev, "Failed to find a free MSI\n"); |
| return -ENOSPC; |
| } |
| |
| return phb->msi_base + hwirq; |
| } |
| EXPORT_SYMBOL(pnv_cxl_alloc_hwirqs); |
| |
| void pnv_cxl_release_hwirqs(struct pci_dev *dev, int hwirq, int num) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| |
| msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq - phb->msi_base, num); |
| } |
| EXPORT_SYMBOL(pnv_cxl_release_hwirqs); |
| |
| void pnv_cxl_release_hwirq_ranges(struct cxl_irq_ranges *irqs, |
| struct pci_dev *dev) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| int i, hwirq; |
| |
| for (i = 1; i < CXL_IRQ_RANGES; i++) { |
| if (!irqs->range[i]) |
| continue; |
| pr_devel("cxl release irq range 0x%x: offset: 0x%lx limit: %ld\n", |
| i, irqs->offset[i], |
| irqs->range[i]); |
| hwirq = irqs->offset[i] - phb->msi_base; |
| msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, |
| irqs->range[i]); |
| } |
| } |
| EXPORT_SYMBOL(pnv_cxl_release_hwirq_ranges); |
| |
| int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs, |
| struct pci_dev *dev, int num) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| int i, hwirq, try; |
| |
| memset(irqs, 0, sizeof(struct cxl_irq_ranges)); |
| |
| /* 0 is reserved for the multiplexed PSL DSI interrupt */ |
| for (i = 1; i < CXL_IRQ_RANGES && num; i++) { |
| try = num; |
| while (try) { |
| hwirq = msi_bitmap_alloc_hwirqs(&phb->msi_bmp, try); |
| if (hwirq >= 0) |
| break; |
| try /= 2; |
| } |
| if (!try) |
| goto fail; |
| |
| irqs->offset[i] = phb->msi_base + hwirq; |
| irqs->range[i] = try; |
| pr_devel("cxl alloc irq range 0x%x: offset: 0x%lx limit: %li\n", |
| i, irqs->offset[i], irqs->range[i]); |
| num -= try; |
| } |
| if (num) |
| goto fail; |
| |
| return 0; |
| fail: |
| pnv_cxl_release_hwirq_ranges(irqs, dev); |
| return -ENOSPC; |
| } |
| EXPORT_SYMBOL(pnv_cxl_alloc_hwirq_ranges); |
| |
| int pnv_cxl_get_irq_count(struct pci_dev *dev) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| |
| return phb->msi_bmp.irq_count; |
| } |
| EXPORT_SYMBOL(pnv_cxl_get_irq_count); |
| |
| int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq, |
| unsigned int virq) |
| { |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| struct pnv_phb *phb = hose->private_data; |
| unsigned int xive_num = hwirq - phb->msi_base; |
| struct pnv_ioda_pe *pe; |
| int rc; |
| |
| if (!(pe = pnv_ioda_get_pe(dev))) |
| return -ENODEV; |
| |
| /* Assign XIVE to PE */ |
| rc = opal_pci_set_xive_pe(phb->opal_id, pe->pe_number, xive_num); |
| if (rc) { |
| pe_warn(pe, "%s: OPAL error %d setting msi_base 0x%x " |
| "hwirq 0x%x XIVE 0x%x PE\n", |
| pci_name(dev), rc, phb->msi_base, hwirq, xive_num); |
| return -EIO; |
| } |
| pnv_set_msi_irq_chip(phb, virq); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pnv_cxl_ioda_msi_setup); |