|  | /* | 
|  | * Copyright (c) 2016 Linaro Ltd. | 
|  | * | 
|  | * This software is licensed under the terms of the GNU General Public | 
|  | * License version 2, as published by the Free Software Foundation, and | 
|  | * may be copied, distributed, and modified under those terms. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/usb/chipidea.h> | 
|  | #include <linux/ulpi/interface.h> | 
|  |  | 
|  | #include "ci.h" | 
|  |  | 
|  | #define ULPI_WAKEUP		BIT(31) | 
|  | #define ULPI_RUN		BIT(30) | 
|  | #define ULPI_WRITE		BIT(29) | 
|  | #define ULPI_SYNC_STATE		BIT(27) | 
|  | #define ULPI_ADDR(n)		((n) << 16) | 
|  | #define ULPI_DATA(n)		(n) | 
|  |  | 
|  | static int ci_ulpi_wait(struct ci_hdrc *ci, u32 mask) | 
|  | { | 
|  | unsigned long usec = 10000; | 
|  |  | 
|  | while (usec--) { | 
|  | if (!hw_read(ci, OP_ULPI_VIEWPORT, mask)) | 
|  | return 0; | 
|  |  | 
|  | udelay(1); | 
|  | } | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static int ci_ulpi_read(struct device *dev, u8 addr) | 
|  | { | 
|  | struct ci_hdrc *ci = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); | 
|  | ret = ci_ulpi_wait(ci, ULPI_WAKEUP); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_RUN | ULPI_ADDR(addr)); | 
|  | ret = ci_ulpi_wait(ci, ULPI_RUN); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return hw_read(ci, OP_ULPI_VIEWPORT, GENMASK(15, 8)) >> 8; | 
|  | } | 
|  |  | 
|  | static int ci_ulpi_write(struct device *dev, u8 addr, u8 val) | 
|  | { | 
|  | struct ci_hdrc *ci = dev_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); | 
|  | ret = ci_ulpi_wait(ci, ULPI_WAKEUP); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, | 
|  | ULPI_RUN | ULPI_WRITE | ULPI_ADDR(addr) | val); | 
|  | return ci_ulpi_wait(ci, ULPI_RUN); | 
|  | } | 
|  |  | 
|  | int ci_ulpi_init(struct ci_hdrc *ci) | 
|  | { | 
|  | if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Set PORTSC correctly so we can read/write ULPI registers for | 
|  | * identification purposes | 
|  | */ | 
|  | hw_phymode_configure(ci); | 
|  |  | 
|  | ci->ulpi_ops.read = ci_ulpi_read; | 
|  | ci->ulpi_ops.write = ci_ulpi_write; | 
|  | ci->ulpi = ulpi_register_interface(ci->dev, &ci->ulpi_ops); | 
|  | if (IS_ERR(ci->ulpi)) | 
|  | dev_err(ci->dev, "failed to register ULPI interface"); | 
|  |  | 
|  | return PTR_ERR_OR_ZERO(ci->ulpi); | 
|  | } | 
|  |  | 
|  | void ci_ulpi_exit(struct ci_hdrc *ci) | 
|  | { | 
|  | if (ci->ulpi) { | 
|  | ulpi_unregister_interface(ci->ulpi); | 
|  | ci->ulpi = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | int ci_ulpi_resume(struct ci_hdrc *ci) | 
|  | { | 
|  | int cnt = 100000; | 
|  |  | 
|  | while (cnt-- > 0) { | 
|  | if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) | 
|  | return 0; | 
|  | udelay(1); | 
|  | } | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } |