|  | /* | 
|  | * xhci-plat.c - xHCI host controller driver platform Bus Glue. | 
|  | * | 
|  | * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com | 
|  | * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> | 
|  | * | 
|  | * A lot of code borrowed from the Linux xHCI driver. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/usb/phy.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/acpi.h> | 
|  |  | 
|  | #include "xhci.h" | 
|  | #include "xhci-plat.h" | 
|  | #include "xhci-mvebu.h" | 
|  | #include "xhci-rcar.h" | 
|  |  | 
|  | static struct hc_driver __read_mostly xhci_plat_hc_driver; | 
|  |  | 
|  | static int xhci_plat_setup(struct usb_hcd *hcd); | 
|  | static int xhci_plat_start(struct usb_hcd *hcd); | 
|  |  | 
|  | static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { | 
|  | .extra_priv_size = sizeof(struct xhci_plat_priv), | 
|  | .reset = xhci_plat_setup, | 
|  | .start = xhci_plat_start, | 
|  | }; | 
|  |  | 
|  | static void xhci_priv_plat_start(struct usb_hcd *hcd) | 
|  | { | 
|  | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | 
|  |  | 
|  | if (priv->plat_start) | 
|  | priv->plat_start(hcd); | 
|  | } | 
|  |  | 
|  | static int xhci_priv_init_quirk(struct usb_hcd *hcd) | 
|  | { | 
|  | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | 
|  |  | 
|  | if (!priv->init_quirk) | 
|  | return 0; | 
|  |  | 
|  | return priv->init_quirk(hcd); | 
|  | } | 
|  |  | 
|  | static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) | 
|  | { | 
|  | /* | 
|  | * As of now platform drivers don't provide MSI support so we ensure | 
|  | * here that the generic code does not try to make a pci_dev from our | 
|  | * dev struct in order to setup MSI | 
|  | */ | 
|  | xhci->quirks |= XHCI_PLAT; | 
|  | } | 
|  |  | 
|  | /* called during probe() after chip reset completes */ | 
|  | static int xhci_plat_setup(struct usb_hcd *hcd) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  |  | 
|  | ret = xhci_priv_init_quirk(hcd); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return xhci_gen_setup(hcd, xhci_plat_quirks); | 
|  | } | 
|  |  | 
|  | static int xhci_plat_start(struct usb_hcd *hcd) | 
|  | { | 
|  | xhci_priv_plat_start(hcd); | 
|  | return xhci_run(hcd); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct xhci_plat_priv xhci_plat_marvell_armada = { | 
|  | .init_quirk = xhci_mvebu_mbus_init_quirk, | 
|  | }; | 
|  |  | 
|  | static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { | 
|  | .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, | 
|  | .init_quirk = xhci_rcar_init_quirk, | 
|  | .plat_start = xhci_rcar_start, | 
|  | }; | 
|  |  | 
|  | static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { | 
|  | .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2, | 
|  | .init_quirk = xhci_rcar_init_quirk, | 
|  | .plat_start = xhci_rcar_start, | 
|  | }; | 
|  |  | 
|  | static const struct xhci_plat_priv xhci_plat_renesas_rcar_r8a7796 = { | 
|  | .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3, | 
|  | .init_quirk = xhci_rcar_init_quirk, | 
|  | .plat_start = xhci_rcar_start, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id usb_xhci_of_match[] = { | 
|  | { | 
|  | .compatible = "generic-xhci", | 
|  | }, { | 
|  | .compatible = "xhci-platform", | 
|  | }, { | 
|  | .compatible = "marvell,armada-375-xhci", | 
|  | .data = &xhci_plat_marvell_armada, | 
|  | }, { | 
|  | .compatible = "marvell,armada-380-xhci", | 
|  | .data = &xhci_plat_marvell_armada, | 
|  | }, { | 
|  | .compatible = "renesas,xhci-r8a7790", | 
|  | .data = &xhci_plat_renesas_rcar_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,xhci-r8a7791", | 
|  | .data = &xhci_plat_renesas_rcar_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,xhci-r8a7793", | 
|  | .data = &xhci_plat_renesas_rcar_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,xhci-r8a7795", | 
|  | .data = &xhci_plat_renesas_rcar_gen3, | 
|  | }, { | 
|  | .compatible = "renesas,xhci-r8a7796", | 
|  | .data = &xhci_plat_renesas_rcar_r8a7796, | 
|  | }, { | 
|  | .compatible = "renesas,rcar-gen2-xhci", | 
|  | .data = &xhci_plat_renesas_rcar_gen2, | 
|  | }, { | 
|  | .compatible = "renesas,rcar-gen3-xhci", | 
|  | .data = &xhci_plat_renesas_rcar_gen3, | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, usb_xhci_of_match); | 
|  | #endif | 
|  |  | 
|  | static int xhci_plat_probe(struct platform_device *pdev) | 
|  | { | 
|  | const struct of_device_id *match; | 
|  | const struct hc_driver	*driver; | 
|  | struct xhci_hcd		*xhci; | 
|  | struct resource         *res; | 
|  | struct usb_hcd		*hcd; | 
|  | struct clk              *clk; | 
|  | int			ret; | 
|  | int			irq; | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | driver = &xhci_plat_hc_driver; | 
|  |  | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Try to set 64-bit DMA first */ | 
|  | if (!pdev->dev.dma_mask) | 
|  | /* Platform did not initialize dma_mask */ | 
|  | ret = dma_coerce_mask_and_coherent(&pdev->dev, | 
|  | DMA_BIT_MASK(64)); | 
|  | else | 
|  | ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); | 
|  |  | 
|  | /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ | 
|  | if (ret) { | 
|  | ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); | 
|  | if (!hcd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | hcd->regs = devm_ioremap_resource(&pdev->dev, res); | 
|  | if (IS_ERR(hcd->regs)) { | 
|  | ret = PTR_ERR(hcd->regs); | 
|  | goto put_hcd; | 
|  | } | 
|  |  | 
|  | hcd->rsrc_start = res->start; | 
|  | hcd->rsrc_len = resource_size(res); | 
|  |  | 
|  | /* | 
|  | * Not all platforms have a clk so it is not an error if the | 
|  | * clock does not exists. | 
|  | */ | 
|  | clk = devm_clk_get(&pdev->dev, NULL); | 
|  | if (!IS_ERR(clk)) { | 
|  | ret = clk_prepare_enable(clk); | 
|  | if (ret) | 
|  | goto put_hcd; | 
|  | } else if (PTR_ERR(clk) == -EPROBE_DEFER) { | 
|  | ret = -EPROBE_DEFER; | 
|  | goto put_hcd; | 
|  | } | 
|  |  | 
|  | xhci = hcd_to_xhci(hcd); | 
|  | match = of_match_node(usb_xhci_of_match, pdev->dev.of_node); | 
|  | if (match) { | 
|  | const struct xhci_plat_priv *priv_match = match->data; | 
|  | struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); | 
|  |  | 
|  | /* Just copy data for now */ | 
|  | if (priv_match) | 
|  | *priv = *priv_match; | 
|  | } | 
|  |  | 
|  | device_wakeup_enable(hcd->self.controller); | 
|  |  | 
|  | xhci->clk = clk; | 
|  | xhci->main_hcd = hcd; | 
|  | xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, | 
|  | dev_name(&pdev->dev), hcd); | 
|  | if (!xhci->shared_hcd) { | 
|  | ret = -ENOMEM; | 
|  | goto disable_clk; | 
|  | } | 
|  |  | 
|  | if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable")) | 
|  | xhci->quirks |= XHCI_LPM_SUPPORT; | 
|  |  | 
|  | if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped")) | 
|  | xhci->quirks |= XHCI_BROKEN_PORT_PED; | 
|  |  | 
|  | hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); | 
|  | if (IS_ERR(hcd->usb_phy)) { | 
|  | ret = PTR_ERR(hcd->usb_phy); | 
|  | if (ret == -EPROBE_DEFER) | 
|  | goto put_usb3_hcd; | 
|  | hcd->usb_phy = NULL; | 
|  | } else { | 
|  | ret = usb_phy_init(hcd->usb_phy); | 
|  | if (ret) | 
|  | goto put_usb3_hcd; | 
|  | } | 
|  |  | 
|  | ret = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
|  | if (ret) | 
|  | goto disable_usb_phy; | 
|  |  | 
|  | if (HCC_MAX_PSA(xhci->hcc_params) >= 4) | 
|  | xhci->shared_hcd->can_do_streams = 1; | 
|  |  | 
|  | ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); | 
|  | if (ret) | 
|  | goto dealloc_usb2_hcd; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  |  | 
|  | dealloc_usb2_hcd: | 
|  | usb_remove_hcd(hcd); | 
|  |  | 
|  | disable_usb_phy: | 
|  | usb_phy_shutdown(hcd->usb_phy); | 
|  |  | 
|  | put_usb3_hcd: | 
|  | usb_put_hcd(xhci->shared_hcd); | 
|  |  | 
|  | disable_clk: | 
|  | if (!IS_ERR(clk)) | 
|  | clk_disable_unprepare(clk); | 
|  |  | 
|  | put_hcd: | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int xhci_plat_remove(struct platform_device *dev) | 
|  | { | 
|  | struct usb_hcd	*hcd = platform_get_drvdata(dev); | 
|  | struct xhci_hcd	*xhci = hcd_to_xhci(hcd); | 
|  | struct clk *clk = xhci->clk; | 
|  |  | 
|  | xhci->xhc_state |= XHCI_STATE_REMOVING; | 
|  |  | 
|  | usb_remove_hcd(xhci->shared_hcd); | 
|  | usb_phy_shutdown(hcd->usb_phy); | 
|  |  | 
|  | usb_remove_hcd(hcd); | 
|  | usb_put_hcd(xhci->shared_hcd); | 
|  |  | 
|  | if (!IS_ERR(clk)) | 
|  | clk_disable_unprepare(clk); | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int xhci_plat_suspend(struct device *dev) | 
|  | { | 
|  | struct usb_hcd	*hcd = dev_get_drvdata(dev); | 
|  | struct xhci_hcd	*xhci = hcd_to_xhci(hcd); | 
|  |  | 
|  | /* | 
|  | * xhci_suspend() needs `do_wakeup` to know whether host is allowed | 
|  | * to do wakeup during suspend. Since xhci_plat_suspend is currently | 
|  | * only designed for system suspend, device_may_wakeup() is enough | 
|  | * to dertermine whether host is allowed to do wakeup. Need to | 
|  | * reconsider this when xhci_plat_suspend enlarges its scope, e.g., | 
|  | * also applies to runtime suspend. | 
|  | */ | 
|  | return xhci_suspend(xhci, device_may_wakeup(dev)); | 
|  | } | 
|  |  | 
|  | static int xhci_plat_resume(struct device *dev) | 
|  | { | 
|  | struct usb_hcd	*hcd = dev_get_drvdata(dev); | 
|  | struct xhci_hcd	*xhci = hcd_to_xhci(hcd); | 
|  |  | 
|  | return xhci_resume(xhci, 0); | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops xhci_plat_pm_ops = { | 
|  | SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) | 
|  | }; | 
|  | #define DEV_PM_OPS	(&xhci_plat_pm_ops) | 
|  | #else | 
|  | #define DEV_PM_OPS	NULL | 
|  | #endif /* CONFIG_PM */ | 
|  |  | 
|  | static const struct acpi_device_id usb_xhci_acpi_match[] = { | 
|  | /* XHCI-compliant USB Controller */ | 
|  | { "PNP0D10", }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); | 
|  |  | 
|  | static struct platform_driver usb_xhci_driver = { | 
|  | .probe	= xhci_plat_probe, | 
|  | .remove	= xhci_plat_remove, | 
|  | .driver	= { | 
|  | .name = "xhci-hcd", | 
|  | .pm = DEV_PM_OPS, | 
|  | .of_match_table = of_match_ptr(usb_xhci_of_match), | 
|  | .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), | 
|  | }, | 
|  | }; | 
|  | MODULE_ALIAS("platform:xhci-hcd"); | 
|  |  | 
|  | static int __init xhci_plat_init(void) | 
|  | { | 
|  | xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); | 
|  | return platform_driver_register(&usb_xhci_driver); | 
|  | } | 
|  | module_init(xhci_plat_init); | 
|  |  | 
|  | static void __exit xhci_plat_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&usb_xhci_driver); | 
|  | } | 
|  | module_exit(xhci_plat_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); | 
|  | MODULE_LICENSE("GPL"); |