| /* | 
 |  * ST's LPC Watchdog | 
 |  * | 
 |  * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved | 
 |  * | 
 |  * Author: David Paris <david.paris@st.com> for STMicroelectronics | 
 |  *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public Licence | 
 |  * as published by the Free Software Foundation; either version | 
 |  * 2 of the Licence, or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/init.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/mfd/syscon.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/watchdog.h> | 
 |  | 
 | #include <dt-bindings/mfd/st-lpc.h> | 
 |  | 
 | /* Low Power Alarm */ | 
 | #define LPC_LPA_LSB_OFF			0x410 | 
 | #define LPC_LPA_START_OFF		0x418 | 
 |  | 
 | /* LPC as WDT */ | 
 | #define LPC_WDT_OFF			0x510 | 
 |  | 
 | static struct watchdog_device st_wdog_dev; | 
 |  | 
 | struct st_wdog_syscfg { | 
 | 	unsigned int reset_type_reg; | 
 | 	unsigned int reset_type_mask; | 
 | 	unsigned int enable_reg; | 
 | 	unsigned int enable_mask; | 
 | }; | 
 |  | 
 | struct st_wdog { | 
 | 	void __iomem *base; | 
 | 	struct device *dev; | 
 | 	struct regmap *regmap; | 
 | 	struct st_wdog_syscfg *syscfg; | 
 | 	struct clk *clk; | 
 | 	unsigned long clkrate; | 
 | 	bool warm_reset; | 
 | }; | 
 |  | 
 | static struct st_wdog_syscfg stih407_syscfg = { | 
 | 	.enable_reg		= 0x204, | 
 | 	.enable_mask		= BIT(19), | 
 | }; | 
 |  | 
 | static const struct of_device_id st_wdog_match[] = { | 
 | 	{ | 
 | 		.compatible = "st,stih407-lpc", | 
 | 		.data = &stih407_syscfg, | 
 | 	}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, st_wdog_match); | 
 |  | 
 | static void st_wdog_setup(struct st_wdog *st_wdog, bool enable) | 
 | { | 
 | 	/* Type of watchdog reset - 0: Cold 1: Warm */ | 
 | 	if (st_wdog->syscfg->reset_type_reg) | 
 | 		regmap_update_bits(st_wdog->regmap, | 
 | 				   st_wdog->syscfg->reset_type_reg, | 
 | 				   st_wdog->syscfg->reset_type_mask, | 
 | 				   st_wdog->warm_reset); | 
 |  | 
 | 	/* Mask/unmask watchdog reset */ | 
 | 	regmap_update_bits(st_wdog->regmap, | 
 | 			   st_wdog->syscfg->enable_reg, | 
 | 			   st_wdog->syscfg->enable_mask, | 
 | 			   enable ? 0 : st_wdog->syscfg->enable_mask); | 
 | } | 
 |  | 
 | static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout) | 
 | { | 
 | 	unsigned long clkrate = st_wdog->clkrate; | 
 |  | 
 | 	writel_relaxed(timeout * clkrate, st_wdog->base + LPC_LPA_LSB_OFF); | 
 | 	writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF); | 
 | } | 
 |  | 
 | static int st_wdog_start(struct watchdog_device *wdd) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	writel_relaxed(1, st_wdog->base + LPC_WDT_OFF); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int st_wdog_stop(struct watchdog_device *wdd) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	writel_relaxed(0, st_wdog->base + LPC_WDT_OFF); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int st_wdog_set_timeout(struct watchdog_device *wdd, | 
 | 			       unsigned int timeout) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	wdd->timeout = timeout; | 
 | 	st_wdog_load_timer(st_wdog, timeout); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int st_wdog_keepalive(struct watchdog_device *wdd) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	st_wdog_load_timer(st_wdog, wdd->timeout); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct watchdog_info st_wdog_info = { | 
 | 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | 
 | 	.identity = "ST LPC WDT", | 
 | }; | 
 |  | 
 | static const struct watchdog_ops st_wdog_ops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.start		= st_wdog_start, | 
 | 	.stop		= st_wdog_stop, | 
 | 	.ping		= st_wdog_keepalive, | 
 | 	.set_timeout	= st_wdog_set_timeout, | 
 | }; | 
 |  | 
 | static struct watchdog_device st_wdog_dev = { | 
 | 	.info		= &st_wdog_info, | 
 | 	.ops		= &st_wdog_ops, | 
 | }; | 
 |  | 
 | static int st_wdog_probe(struct platform_device *pdev) | 
 | { | 
 | 	const struct of_device_id *match; | 
 | 	struct device_node *np = pdev->dev.of_node; | 
 | 	struct st_wdog *st_wdog; | 
 | 	struct regmap *regmap; | 
 | 	struct resource *res; | 
 | 	struct clk *clk; | 
 | 	void __iomem *base; | 
 | 	uint32_t mode; | 
 | 	int ret; | 
 |  | 
 | 	ret = of_property_read_u32(np, "st,lpc-mode", &mode); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "An LPC mode must be provided\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* LPC can either run as a Clocksource or in RTC or WDT mode */ | 
 | 	if (mode != ST_LPC_MODE_WDT) | 
 | 		return -ENODEV; | 
 |  | 
 | 	st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL); | 
 | 	if (!st_wdog) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	match = of_match_device(st_wdog_match, &pdev->dev); | 
 | 	if (!match) { | 
 | 		dev_err(&pdev->dev, "Couldn't match device\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	st_wdog->syscfg	= (struct st_wdog_syscfg *)match->data; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	base = devm_ioremap_resource(&pdev->dev, res); | 
 | 	if (IS_ERR(base)) | 
 | 		return PTR_ERR(base); | 
 |  | 
 | 	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); | 
 | 	if (IS_ERR(regmap)) { | 
 | 		dev_err(&pdev->dev, "No syscfg phandle specified\n"); | 
 | 		return PTR_ERR(regmap); | 
 | 	} | 
 |  | 
 | 	clk = devm_clk_get(&pdev->dev, NULL); | 
 | 	if (IS_ERR(clk)) { | 
 | 		dev_err(&pdev->dev, "Unable to request clock\n"); | 
 | 		return PTR_ERR(clk); | 
 | 	} | 
 |  | 
 | 	st_wdog->dev		= &pdev->dev; | 
 | 	st_wdog->base		= base; | 
 | 	st_wdog->clk		= clk; | 
 | 	st_wdog->regmap		= regmap; | 
 | 	st_wdog->warm_reset	= of_property_read_bool(np, "st,warm_reset"); | 
 | 	st_wdog->clkrate	= clk_get_rate(st_wdog->clk); | 
 |  | 
 | 	if (!st_wdog->clkrate) { | 
 | 		dev_err(&pdev->dev, "Unable to fetch clock rate\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	st_wdog_dev.max_timeout = 0xFFFFFFFF / st_wdog->clkrate; | 
 | 	st_wdog_dev.parent = &pdev->dev; | 
 |  | 
 | 	ret = clk_prepare_enable(clk); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "Unable to enable clock\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	watchdog_set_drvdata(&st_wdog_dev, st_wdog); | 
 | 	watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT); | 
 |  | 
 | 	/* Init Watchdog timeout with value in DT */ | 
 | 	ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n"); | 
 | 		clk_disable_unprepare(clk); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = watchdog_register_device(&st_wdog_dev); | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "Unable to register watchdog\n"); | 
 | 		clk_disable_unprepare(clk); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	st_wdog_setup(st_wdog, true); | 
 |  | 
 | 	dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s", | 
 | 		 st_wdog->warm_reset ? "warm" : "cold"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int st_wdog_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); | 
 |  | 
 | 	st_wdog_setup(st_wdog, false); | 
 | 	watchdog_unregister_device(&st_wdog_dev); | 
 | 	clk_disable_unprepare(st_wdog->clk); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM_SLEEP | 
 | static int st_wdog_suspend(struct device *dev) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); | 
 |  | 
 | 	if (watchdog_active(&st_wdog_dev)) | 
 | 		st_wdog_stop(&st_wdog_dev); | 
 |  | 
 | 	st_wdog_setup(st_wdog, false); | 
 |  | 
 | 	clk_disable(st_wdog->clk); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int st_wdog_resume(struct device *dev) | 
 | { | 
 | 	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev); | 
 | 	int ret; | 
 |  | 
 | 	ret = clk_enable(st_wdog->clk); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "Unable to re-enable clock\n"); | 
 | 		watchdog_unregister_device(&st_wdog_dev); | 
 | 		clk_unprepare(st_wdog->clk); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	st_wdog_setup(st_wdog, true); | 
 |  | 
 | 	if (watchdog_active(&st_wdog_dev)) { | 
 | 		st_wdog_load_timer(st_wdog, st_wdog_dev.timeout); | 
 | 		st_wdog_start(&st_wdog_dev); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops, | 
 | 			 st_wdog_suspend, | 
 | 			 st_wdog_resume); | 
 |  | 
 | static struct platform_driver st_wdog_driver = { | 
 | 	.driver	= { | 
 | 		.name = "st-lpc-wdt", | 
 | 		.pm = &st_wdog_pm_ops, | 
 | 		.of_match_table = st_wdog_match, | 
 | 	}, | 
 | 	.probe = st_wdog_probe, | 
 | 	.remove = st_wdog_remove, | 
 | }; | 
 | module_platform_driver(st_wdog_driver); | 
 |  | 
 | MODULE_AUTHOR("David Paris <david.paris@st.com>"); | 
 | MODULE_DESCRIPTION("ST LPC Watchdog Driver"); | 
 | MODULE_LICENSE("GPL"); |