blob: 3725f2b0d60bd2ca037158e28757decbb835ceea [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
*/
/dts-v1/;
#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
model = "Linksys EA9500";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
};
gpio-keys {
compatible = "gpio-keys";
wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
};
usb2 {
label = "bcm53xx:green:usb2";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
};
power {
label = "bcm53xx:white:power";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
};
wifi-disabled {
label = "bcm53xx:amber:wifi-disabled";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
};
wifi-enabled {
label = "bcm53xx:white:wifi-enabled";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
};
bluebar1 {
label = "bcm53xx:white:bluebar1";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
};
bluebar2 {
label = "bcm53xx:white:bluebar2";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
};
bluebar3 {
label = "bcm53xx:white:bluebar3";
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
};
bluebar4 {
label = "bcm53xx:white:bluebar4";
gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
bluebar5 {
label = "bcm53xx:white:bluebar5";
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
};
bluebar6 {
label = "bcm53xx:white:bluebar6";
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
};
bluebar7 {
label = "bcm53xx:white:bluebar7";
gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
};
bluebar8 {
label = "bcm53xx:white:bluebar8";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
};
};
mdio-bus-mux@18003000 {
/* BIT(9) = 1 => external mdio */
mdio@200 {
reg = <0x200>;
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
compatible = "brcm,bcm53125";
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
reset-names = "robo_reset";
reg = <0>;
dsa,member = <1 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_mdio>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan5";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan6";
};
port@4 {
reg = <4>;
label = "lan3";
};
sw1_p8: port@8 {
reg = <8>;
ethernet = <&sw0_p0>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
};
&srab {
compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
status = "okay";
dsa,member = <0 0>;
ports {
port@1 {
reg = <1>;
label = "lan7";
};
port@2 {
reg = <2>;
label = "lan4";
};
port@3 {
reg = <3>;
label = "lan8";
};
port@4 {
reg = <4>;
label = "wan";
};
port@5 {
reg = <5>;
ethernet = <&gmac0>;
label = "cpu";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@7 {
reg = <7>;
ethernet = <&gmac1>;
label = "cpu";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@8 {
reg = <8>;
ethernet = <&gmac2>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
};
sw0_p0: port@0 {
reg = <0>;
label = "extsw";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&usb3_phy {
status = "okay";
};
&nandcs {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0000000 0x0080000>;
read-only;
};
partition@80000 {
label = "nvram";
reg = <0x080000 0x0100000>;
};
partition@180000{
label = "devinfo";
reg = <0x0180000 0x080000>;
};
partition@200000 {
label = "firmware";
reg = <0x0200000 0x01D00000>;
compatible = "brcm,trx";
};
partition@1F00000 {
label = "failsafe";
reg = <0x01F00000 0x01D00000>;
read-only;
};
partition@5200000 {
label = "system";
reg = <0x05200000 0x02E00000>;
};
};
};