| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Hycon HY46XX series touchscreen controller |
| |
| description: | |
| There are 6 variants of the chip for various touch panel sizes and cover lens material |
| Glass: 0.3mm--4.0mm |
| PET/PMMA: 0.2mm--2.0mm |
| HY4613(B)-N048 < 6" |
| HY4614(B)-N068 7" .. 10.1" |
| HY4621-NS32 < 5" |
| HY4623-NS48 5.1" .. 7" |
| Glass: 0.3mm--8.0mm |
| PET/PMMA: 0.2mm--4.0mm |
| HY4633(B)-N048 < 6" |
| HY4635(B)-N048 < 7" .. 10.1" |
| |
| maintainers: |
| - Giulio Benetti <giulio.benetti@benettiengineering.com> |
| |
| allOf: |
| - $ref: touchscreen.yaml# |
| |
| properties: |
| compatible: |
| enum: |
| - hycon,hy4613 |
| - hycon,hy4614 |
| - hycon,hy4621 |
| - hycon,hy4623 |
| - hycon,hy4633 |
| - hycon,hy4635 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| vcc-supply: true |
| |
| hycon,threshold: |
| description: Allows setting the sensitivity in the range from 0 to 255. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 0 |
| maximum: 255 |
| |
| hycon,glove-enable: |
| type: boolean |
| description: Allows enabling glove setting. |
| |
| hycon,report-speed-hz: |
| description: Allows setting the report speed in Hertz. |
| minimum: 1 |
| maximum: 255 |
| |
| hycon,noise-filter-enable: |
| type: boolean |
| description: Allows enabling power noise filter. |
| |
| hycon,filter-data: |
| description: Allows setting how many samples throw before reporting touch |
| in the range from 0 to 5. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 0 |
| maximum: 5 |
| |
| hycon,gain: |
| description: Allows setting the sensitivity distance in the range from 0 to 5. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 0 |
| maximum: 5 |
| |
| hycon,edge-offset: |
| description: Allows setting the edge compensation in the range from 0 to 16. |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 0 |
| maximum: 16 |
| |
| touchscreen-size-x: true |
| touchscreen-size-y: true |
| touchscreen-fuzz-x: true |
| touchscreen-fuzz-y: true |
| touchscreen-inverted-x: true |
| touchscreen-inverted-y: true |
| touchscreen-swapped-x-y: true |
| interrupt-controller: true |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| touchscreen@1c { |
| compatible = "hycon,hy4633"; |
| reg = <0x1c>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <5 IRQ_TYPE_EDGE_FALLING>; |
| reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| ... |