| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm CAMSS ISP |
| |
| maintainers: |
| - Robert Foss <robert.foss@linaro.org> |
| - Todor Tomov <todor.too@gmail.com> |
| |
| description: | |
| The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms |
| |
| properties: |
| compatible: |
| const: qcom,msm8996-camss |
| |
| clocks: |
| minItems: 36 |
| maxItems: 36 |
| |
| clock-names: |
| items: |
| - const: top_ahb |
| - const: ispif_ahb |
| - const: csiphy0_timer |
| - const: csiphy1_timer |
| - const: csiphy2_timer |
| - const: csi0_ahb |
| - const: csi0 |
| - const: csi0_phy |
| - const: csi0_pix |
| - const: csi0_rdi |
| - const: csi1_ahb |
| - const: csi1 |
| - const: csi1_phy |
| - const: csi1_pix |
| - const: csi1_rdi |
| - const: csi2_ahb |
| - const: csi2 |
| - const: csi2_phy |
| - const: csi2_pix |
| - const: csi2_rdi |
| - const: csi3_ahb |
| - const: csi3 |
| - const: csi3_phy |
| - const: csi3_pix |
| - const: csi3_rdi |
| - const: ahb |
| - const: vfe0 |
| - const: csi_vfe0 |
| - const: vfe0_ahb |
| - const: vfe0_stream |
| - const: vfe1 |
| - const: csi_vfe1 |
| - const: vfe1_ahb |
| - const: vfe1_stream |
| - const: vfe_ahb |
| - const: vfe_axi |
| |
| interrupts: |
| minItems: 10 |
| maxItems: 10 |
| |
| interrupt-names: |
| items: |
| - const: csiphy0 |
| - const: csiphy1 |
| - const: csiphy2 |
| - const: csid0 |
| - const: csid1 |
| - const: csid2 |
| - const: csid3 |
| - const: ispif |
| - const: vfe0 |
| - const: vfe1 |
| |
| iommus: |
| maxItems: 4 |
| |
| power-domains: |
| items: |
| - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller. |
| - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller. |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| description: |
| CSI input ports. |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| Input port for receiving CSI data. |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| description: |
| An array of physical data lanes indexes. |
| Position of an entry determines the logical |
| lane number, while the value of an entry |
| indicates physical lane index. Lane swapping |
| is supported. Physical lane indexes are; |
| 0, 1, 2, 3 |
| minItems: 1 |
| maxItems: 4 |
| |
| required: |
| - data-lanes |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| Input port for receiving CSI data. |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| minItems: 1 |
| maxItems: 4 |
| |
| required: |
| - data-lanes |
| |
| port@2: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| Input port for receiving CSI data. |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| minItems: 1 |
| maxItems: 4 |
| |
| required: |
| - data-lanes |
| |
| port@3: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| Input port for receiving CSI data. |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| data-lanes: |
| minItems: 1 |
| maxItems: 4 |
| |
| required: |
| - data-lanes |
| |
| reg: |
| minItems: 14 |
| maxItems: 14 |
| |
| reg-names: |
| items: |
| - const: csiphy0 |
| - const: csiphy0_clk_mux |
| - const: csiphy1 |
| - const: csiphy1_clk_mux |
| - const: csiphy2 |
| - const: csiphy2_clk_mux |
| - const: csid0 |
| - const: csid1 |
| - const: csid2 |
| - const: csid3 |
| - const: ispif |
| - const: csi_clk_mux |
| - const: vfe0 |
| - const: vfe1 |
| |
| vdda-supply: |
| description: |
| Definition of the regulator used as analog power supply. |
| |
| required: |
| - clock-names |
| - clocks |
| - compatible |
| - interrupt-names |
| - interrupts |
| - iommus |
| - power-domains |
| - reg |
| - reg-names |
| - vdda-supply |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-msm8996.h> |
| #include <dt-bindings/clock/qcom,mmcc-msm8996.h> |
| |
| camss: camss@a34000 { |
| compatible = "qcom,msm8996-camss"; |
| |
| clocks = <&mmcc CAMSS_TOP_AHB_CLK>, |
| <&mmcc CAMSS_ISPIF_AHB_CLK>, |
| <&mmcc CAMSS_CSI0PHYTIMER_CLK>, |
| <&mmcc CAMSS_CSI1PHYTIMER_CLK>, |
| <&mmcc CAMSS_CSI2PHYTIMER_CLK>, |
| <&mmcc CAMSS_CSI0_AHB_CLK>, |
| <&mmcc CAMSS_CSI0_CLK>, |
| <&mmcc CAMSS_CSI0PHY_CLK>, |
| <&mmcc CAMSS_CSI0PIX_CLK>, |
| <&mmcc CAMSS_CSI0RDI_CLK>, |
| <&mmcc CAMSS_CSI1_AHB_CLK>, |
| <&mmcc CAMSS_CSI1_CLK>, |
| <&mmcc CAMSS_CSI1PHY_CLK>, |
| <&mmcc CAMSS_CSI1PIX_CLK>, |
| <&mmcc CAMSS_CSI1RDI_CLK>, |
| <&mmcc CAMSS_CSI2_AHB_CLK>, |
| <&mmcc CAMSS_CSI2_CLK>, |
| <&mmcc CAMSS_CSI2PHY_CLK>, |
| <&mmcc CAMSS_CSI2PIX_CLK>, |
| <&mmcc CAMSS_CSI2RDI_CLK>, |
| <&mmcc CAMSS_CSI3_AHB_CLK>, |
| <&mmcc CAMSS_CSI3_CLK>, |
| <&mmcc CAMSS_CSI3PHY_CLK>, |
| <&mmcc CAMSS_CSI3PIX_CLK>, |
| <&mmcc CAMSS_CSI3RDI_CLK>, |
| <&mmcc CAMSS_AHB_CLK>, |
| <&mmcc CAMSS_VFE0_CLK>, |
| <&mmcc CAMSS_CSI_VFE0_CLK>, |
| <&mmcc CAMSS_VFE0_AHB_CLK>, |
| <&mmcc CAMSS_VFE0_STREAM_CLK>, |
| <&mmcc CAMSS_VFE1_CLK>, |
| <&mmcc CAMSS_CSI_VFE1_CLK>, |
| <&mmcc CAMSS_VFE1_AHB_CLK>, |
| <&mmcc CAMSS_VFE1_STREAM_CLK>, |
| <&mmcc CAMSS_VFE_AHB_CLK>, |
| <&mmcc CAMSS_VFE_AXI_CLK>; |
| |
| clock-names = "top_ahb", |
| "ispif_ahb", |
| "csiphy0_timer", |
| "csiphy1_timer", |
| "csiphy2_timer", |
| "csi0_ahb", |
| "csi0", |
| "csi0_phy", |
| "csi0_pix", |
| "csi0_rdi", |
| "csi1_ahb", |
| "csi1", |
| "csi1_phy", |
| "csi1_pix", |
| "csi1_rdi", |
| "csi2_ahb", |
| "csi2", |
| "csi2_phy", |
| "csi2_pix", |
| "csi2_rdi", |
| "csi3_ahb", |
| "csi3", |
| "csi3_phy", |
| "csi3_pix", |
| "csi3_rdi", |
| "ahb", |
| "vfe0", |
| "csi_vfe0", |
| "vfe0_ahb", |
| "vfe0_stream", |
| "vfe1", |
| "csi_vfe1", |
| "vfe1_ahb", |
| "vfe1_stream", |
| "vfe_ahb", |
| "vfe_axi"; |
| |
| interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-names = "csiphy0", |
| "csiphy1", |
| "csiphy2", |
| "csid0", |
| "csid1", |
| "csid2", |
| "csid3", |
| "ispif", |
| "vfe0", |
| "vfe1"; |
| |
| iommus = <&vfe_smmu 0>, |
| <&vfe_smmu 1>, |
| <&vfe_smmu 2>, |
| <&vfe_smmu 3>; |
| |
| power-domains = <&mmcc VFE0_GDSC>, |
| <&mmcc VFE1_GDSC>; |
| |
| reg = <0x00a34000 0x1000>, |
| <0x00a00030 0x4>, |
| <0x00a35000 0x1000>, |
| <0x00a00038 0x4>, |
| <0x00a36000 0x1000>, |
| <0x00a00040 0x4>, |
| <0x00a30000 0x100>, |
| <0x00a30400 0x100>, |
| <0x00a30800 0x100>, |
| <0x00a30c00 0x100>, |
| <0x00a31000 0x500>, |
| <0x00a00020 0x10>, |
| <0x00a10000 0x1000>, |
| <0x00a14000 0x1000>; |
| |
| reg-names = "csiphy0", |
| "csiphy0_clk_mux", |
| "csiphy1", |
| "csiphy1_clk_mux", |
| "csiphy2", |
| "csiphy2_clk_mux", |
| "csid0", |
| "csid1", |
| "csid2", |
| "csid3", |
| "ispif", |
| "csi_clk_mux", |
| "vfe0", |
| "vfe1"; |
| |
| vdda-supply = <®_2v8>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
