| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Maxim DS2760 |
| |
| maintainers: |
| - Sebastian Reichel <sre@kernel.org> |
| |
| description: | |
| The ds2760 is a w1 slave device and must hence have its sub-node in |
| DT under a w1 bus master node. |
| |
| allOf: |
| - $ref: power-supply.yaml# |
| |
| properties: |
| compatible: |
| const: maxim,ds2760 |
| |
| maxim,pmod-enabled: |
| description: | |
| Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds |
| and leave sleep Mode when the DQ line goes high. |
| type: boolean |
| |
| maxim,cache-time-ms: |
| description: | |
| Time im milliseconds to cache the data for. |
| When this time expires, the values are read again from the hardware. |
| Defaults to 1000. |
| |
| rated-capacity-microamp-hours: |
| description: | |
| The rated capacity of the battery, in mAh. |
| If not specified, the value stored in the non-volatile chip memory is used. |
| |
| required: |
| - compatible |
| |
| unevaluatedProperties: false |
