| *st-asc(Serial Port) |
| |
| Required properties: |
| - compatible : Should be "st,asc". |
| - reg, reg-names, interrupts, interrupt-names : Standard way to define device |
| resources with names. look in |
| Documentation/devicetree/bindings/resource-names.txt |
| |
| Optional properties: |
| - st,hw-flow-ctrl bool flag to enable hardware flow control. |
| - st,force-m1 bool flat to force asc to be in Mode-1 recommended |
| for high bit rates (above 19.2K) |
| Example: |
| serial@fe440000{ |
| compatible = "st,asc"; |
| reg = <0xfe440000 0x2c>; |
| interrupts = <0 209 0>; |
| }; |
