drivers/tty/serial/8250/8250.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  *  Driver for 8250/16550-type serial ports
  *
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *
  *  Copyright (C) 2001 Russell King.
  */

 #include <linux/bits.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/dmaengine.h>

 #include "../serial_mctrl_gpio.h"

 struct uart_8250_dma {
 	int (*tx_dma)(struct uart_8250_port *p);
 	int (*rx_dma)(struct uart_8250_port *p);
 	void (*prepare_tx_dma)(struct uart_8250_port *p);
 	void (*prepare_rx_dma)(struct uart_8250_port *p);

 	/* Filter function */
 	dma_filter_fn		fn;
 	/* Parameter to the filter function */
 	void			*rx_param;
 	void			*tx_param;

 	struct dma_slave_config	rxconf;
 	struct dma_slave_config	txconf;

 	struct dma_chan		*rxchan;
 	struct dma_chan		*txchan;

 	/* Device address base for DMA operations */
 	phys_addr_t		rx_dma_addr;
 	phys_addr_t		tx_dma_addr;

 	/* DMA address of the buffer in memory */
 	dma_addr_t		rx_addr;
 	dma_addr_t		tx_addr;

 	dma_cookie_t		rx_cookie;
 	dma_cookie_t		tx_cookie;

 	void			*rx_buf;

 	size_t			rx_size;
 	size_t			tx_size;

 	unsigned char		tx_running;
 	unsigned char		tx_err;
 	unsigned char		rx_running;
 };

 struct old_serial_port {
 	unsigned int uart;
 	unsigned int baud_base;
 	unsigned int port;
 	unsigned int irq;
 	upf_t        flags;
 	unsigned char io_type;
 	unsigned char __iomem *iomem_base;
 	unsigned short iomem_reg_shift;
 };

 struct serial8250_config {
 	const char	*name;
 	unsigned short	fifo_size;
 	unsigned short	tx_loadsz;
 	unsigned char	fcr;
 	unsigned char	rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE];
 	unsigned int	flags;
 };

 #define UART_CAP_FIFO	BIT(8)	/* UART has FIFO */
 #define UART_CAP_EFR	BIT(9)	/* UART has EFR */
 #define UART_CAP_SLEEP	BIT(10)	/* UART has IER sleep */
 #define UART_CAP_AFE	BIT(11)	/* MCR-based hw flow control */
 #define UART_CAP_UUE	BIT(12)	/* UART needs IER bit 6 set (Xscale) */
 #define UART_CAP_RTOIE	BIT(13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
 #define UART_CAP_HFIFO	BIT(14)	/* UART has a "hidden" FIFO */
 #define UART_CAP_RPM	BIT(15)	/* Runtime PM is active while idle */
 #define UART_CAP_IRDA	BIT(16)	/* UART supports IrDA line discipline */
 #define UART_CAP_MINI	BIT(17)	/* Mini UART on BCM283X family lacks:
 					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
 					 */
 #define UART_CAP_NOTEMT	BIT(18)	/* UART without interrupt on TEMT available */

 #define UART_BUG_QUOT	BIT(0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	BIT(1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	BIT(2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
 #define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */


 #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
 #define SERIAL8250_SHARE_IRQS 1
 #else
 #define SERIAL8250_SHARE_IRQS 0
 #endif

 #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags)		\
 	{							\
 		.iobase		= _base,			\
 		.irq		= _irq,				\
 		.uartclk	= 1843200,			\
 		.iotype		= UPIO_PORT,			\
 		.flags		= UPF_BOOT_AUTOCONF | (_flags),	\
 	}

 #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)


 static inline int serial_in(struct uart_8250_port *up, int offset)
 {
 	return up->port.serial_in(&up->port, offset);
 }

 static inline void serial_out(struct uart_8250_port *up, int offset, int value)
 {
 	up->port.serial_out(&up->port, offset, value);
 }

 /**
  *	serial_lsr_in - Read LSR register and preserve flags across reads
  *	@up:	uart 8250 port
  *
  *	Read LSR register and handle saving non-preserved flags across reads.
  *	The flags that are not preserved across reads are stored into
  *	up->lsr_saved_flags.
  *
  *	Returns LSR value or'ed with the preserved flags (if any).
  */
 static inline u16 serial_lsr_in(struct uart_8250_port *up)
 {
 	u16 lsr = up->lsr_saved_flags;

 	lsr |= serial_in(up, UART_LSR);
 	up->lsr_saved_flags = lsr & up->lsr_save_mask;

 	return lsr;
 }

 /*
  * For the 16C950
  */
 static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
 {
 	serial_out(up, UART_SCR, offset);
 	serial_out(up, UART_ICR, value);
 }

 static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up,
 						   int offset)
 {
 	unsigned int value;

 	serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
 	serial_out(up, UART_SCR, offset);
 	value = serial_in(up, UART_ICR);
 	serial_icr_write(up, UART_ACR, up->acr);

 	return value;
 }

 void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);

 static inline u32 serial_dl_read(struct uart_8250_port *up)
 {
 	return up->dl_read(up);
 }

 static inline void serial_dl_write(struct uart_8250_port *up, u32 value)
 {
 	up->dl_write(up, value);
 }

 static inline bool serial8250_set_THRI(struct uart_8250_port *up)
 {
 	/* Port locked to synchronize UART_IER access against the console. */
 	lockdep_assert_held_once(&up->port.lock);

 	if (up->ier & UART_IER_THRI)
 		return false;
 	up->ier |= UART_IER_THRI;
 	serial_out(up, UART_IER, up->ier);
 	return true;
 }

 static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
 {
 	/* Port locked to synchronize UART_IER access against the console. */
 	lockdep_assert_held_once(&up->port.lock);

 	if (!(up->ier & UART_IER_THRI))
 		return false;
 	up->ier &= ~UART_IER_THRI;
 	serial_out(up, UART_IER, up->ier);
 	return true;
 }

 struct uart_8250_port *serial8250_get_port(int line);

 void serial8250_rpm_get(struct uart_8250_port *p);
 void serial8250_rpm_put(struct uart_8250_port *p);

 void serial8250_rpm_get_tx(struct uart_8250_port *p);
 void serial8250_rpm_put_tx(struct uart_8250_port *p);

 int serial8250_em485_config(struct uart_port *port, struct ktermios *termios,
 			    struct serial_rs485 *rs485);
 void serial8250_em485_start_tx(struct uart_8250_port *p);
 void serial8250_em485_stop_tx(struct uart_8250_port *p);
 void serial8250_em485_destroy(struct uart_8250_port *p);
 extern struct serial_rs485 serial8250_em485_supported;

 /* MCR <-> TIOCM conversion */
 static inline int serial8250_TIOCM_to_MCR(int tiocm)
 {
 	int mcr = 0;

 	if (tiocm & TIOCM_RTS)
 		mcr |= UART_MCR_RTS;
 	if (tiocm & TIOCM_DTR)
 		mcr |= UART_MCR_DTR;
 	if (tiocm & TIOCM_OUT1)
 		mcr |= UART_MCR_OUT1;
 	if (tiocm & TIOCM_OUT2)
 		mcr |= UART_MCR_OUT2;
 	if (tiocm & TIOCM_LOOP)
 		mcr |= UART_MCR_LOOP;

 	return mcr;
 }

 static inline int serial8250_MCR_to_TIOCM(int mcr)
 {
 	int tiocm = 0;

 	if (mcr & UART_MCR_RTS)
 		tiocm |= TIOCM_RTS;
 	if (mcr & UART_MCR_DTR)
 		tiocm |= TIOCM_DTR;
 	if (mcr & UART_MCR_OUT1)
 		tiocm |= TIOCM_OUT1;
 	if (mcr & UART_MCR_OUT2)
 		tiocm |= TIOCM_OUT2;
 	if (mcr & UART_MCR_LOOP)
 		tiocm |= TIOCM_LOOP;

 	return tiocm;
 }

 /* MSR <-> TIOCM conversion */
 static inline int serial8250_MSR_to_TIOCM(int msr)
 {
 	int tiocm = 0;

 	if (msr & UART_MSR_DCD)
 		tiocm |= TIOCM_CAR;
 	if (msr & UART_MSR_RI)
 		tiocm |= TIOCM_RNG;
 	if (msr & UART_MSR_DSR)
 		tiocm |= TIOCM_DSR;
 	if (msr & UART_MSR_CTS)
 		tiocm |= TIOCM_CTS;

 	return tiocm;
 }

 static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
 {
 	serial_out(up, UART_MCR, value);

 	if (up->gpios)
 		mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value));
 }

 static inline int serial8250_in_MCR(struct uart_8250_port *up)
 {
 	int mctrl;

 	mctrl = serial_in(up, UART_MCR);

 	if (up->gpios) {
 		unsigned int mctrl_gpio = 0;

 		mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
 		mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio);
 	}

 	return mctrl;
 }

 bool alpha_jensen(void);
 void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl);

 #ifdef CONFIG_SERIAL_8250_PNP
 int serial8250_pnp_init(void);
 void serial8250_pnp_exit(void);
 #else
 static inline int serial8250_pnp_init(void) { return 0; }
 static inline void serial8250_pnp_exit(void) { }
 #endif

 #ifdef CONFIG_SERIAL_8250_FINTEK
 int fintek_8250_probe(struct uart_8250_port *uart);
 #else
 static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
 #endif

 #ifdef CONFIG_ARCH_OMAP1
 #include <linux/soc/ti/omap1-soc.h>
 static inline int is_omap1_8250(struct uart_8250_port *pt)
 {
 	int res;

 	switch (pt->port.mapbase) {
 	case OMAP1_UART1_BASE:
 	case OMAP1_UART2_BASE:
 	case OMAP1_UART3_BASE:
 		res = 1;
 		break;
 	default:
 		res = 0;
 		break;
 	}

 	return res;
 }

 static inline int is_omap1510_8250(struct uart_8250_port *pt)
 {
 	if (!cpu_is_omap1510())
 		return 0;

 	return is_omap1_8250(pt);
 }
 #else
 static inline int is_omap1_8250(struct uart_8250_port *pt)
 {
 	return 0;
 }
 static inline int is_omap1510_8250(struct uart_8250_port *pt)
 {
 	return 0;
 }
 #endif

 #ifdef CONFIG_SERIAL_8250_DMA
 extern int serial8250_tx_dma(struct uart_8250_port *);
 extern int serial8250_rx_dma(struct uart_8250_port *);
 extern void serial8250_rx_dma_flush(struct uart_8250_port *);
 extern int serial8250_request_dma(struct uart_8250_port *);
 extern void serial8250_release_dma(struct uart_8250_port *);

 static inline void serial8250_do_prepare_tx_dma(struct uart_8250_port *p)
 {
 	struct uart_8250_dma *dma = p->dma;

 	if (dma->prepare_tx_dma)
 		dma->prepare_tx_dma(p);
 }

 static inline void serial8250_do_prepare_rx_dma(struct uart_8250_port *p)
 {
 	struct uart_8250_dma *dma = p->dma;

 	if (dma->prepare_rx_dma)
 		dma->prepare_rx_dma(p);
 }

 static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
 {
 	struct uart_8250_dma *dma = p->dma;

 	return dma && dma->tx_running;
 }
 #else
 static inline int serial8250_tx_dma(struct uart_8250_port *p)
 {
 	return -1;
 }
 static inline int serial8250_rx_dma(struct uart_8250_port *p)
 {
 	return -1;
 }
 static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { }
 static inline int serial8250_request_dma(struct uart_8250_port *p)
 {
 	return -1;
 }
 static inline void serial8250_release_dma(struct uart_8250_port *p) { }

 static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
 {
 	return false;
 }
 #endif

 static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
 {
 	unsigned char status;

 	status = serial_in(up, 0x04); /* EXCR2 */
 #define PRESL(x) ((x) & 0x30)
 	if (PRESL(status) == 0x10) {
 		/* already in high speed mode */
 		return 0;
 	} else {
 		status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
 		status |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
 		serial_out(up, 0x04, status);
 	}
 	return 1;
 }

 static inline int serial_index(struct uart_port *port)
 {
 	return port->minor - 64;
 }
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Driver for 8250/16550-type serial ports
	*
	* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
	*
	* Copyright (C) 2001 Russell King.
	*/

	#include <linux/bits.h>
	#include <linux/serial_8250.h>
	#include <linux/serial_reg.h>
	#include <linux/dmaengine.h>

	#include "../serial_mctrl_gpio.h"

	struct uart_8250_dma {
	int (tx_dma)(struct uart_8250_port p);
	int (rx_dma)(struct uart_8250_port p);
	void (prepare_tx_dma)(struct uart_8250_port p);
	void (prepare_rx_dma)(struct uart_8250_port p);

	/* Filter function */
	dma_filter_fn fn;
	/* Parameter to the filter function */
	void *rx_param;
	void *tx_param;

	struct dma_slave_config rxconf;
	struct dma_slave_config txconf;

	struct dma_chan *rxchan;
	struct dma_chan *txchan;

	/* Device address base for DMA operations */
	phys_addr_t rx_dma_addr;
	phys_addr_t tx_dma_addr;

	/* DMA address of the buffer in memory */
	dma_addr_t rx_addr;
	dma_addr_t tx_addr;

	dma_cookie_t rx_cookie;
	dma_cookie_t tx_cookie;

	void *rx_buf;

	size_t rx_size;
	size_t tx_size;

	unsigned char tx_running;
	unsigned char tx_err;
	unsigned char rx_running;
	};

	struct old_serial_port {
	unsigned int uart;
	unsigned int baud_base;
	unsigned int port;
	unsigned int irq;
	upf_t flags;
	unsigned char io_type;
	unsigned char __iomem *iomem_base;
	unsigned short iomem_reg_shift;
	};

	struct serial8250_config {
	const char *name;
	unsigned short fifo_size;
	unsigned short tx_loadsz;
	unsigned char fcr;
	unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE];
	unsigned int flags;
	};

	#define UART_CAP_FIFO BIT(8) /* UART has FIFO */
	#define UART_CAP_EFR BIT(9) /* UART has EFR */
	#define UART_CAP_SLEEP BIT(10) /* UART has IER sleep */
	#define UART_CAP_AFE BIT(11) /* MCR-based hw flow control */
	#define UART_CAP_UUE BIT(12) /* UART needs IER bit 6 set (Xscale) */
	#define UART_CAP_RTOIE BIT(13) /* UART needs IER bit 4 set (Xscale, Tegra) */
	#define UART_CAP_HFIFO BIT(14) /* UART has a "hidden" FIFO */
	#define UART_CAP_RPM BIT(15) /* Runtime PM is active while idle */
	#define UART_CAP_IRDA BIT(16) /* UART supports IrDA line discipline */
	#define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks:
	* STOP PARITY EPAR SPAR WLEN5 WLEN6
	*/
	#define UART_CAP_NOTEMT BIT(18) /* UART without interrupt on TEMT available */

	#define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */
	#define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */
	#define UART_BUG_NOMSR BIT(2) /* UART has buggy MSR status bits (Au1x00) */
	#define UART_BUG_THRE BIT(3) /* UART has buggy THRE reassertion */
	#define UART_BUG_TXRACE BIT(5) /* UART Tx fails to set remote DR */


	#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
	#define SERIAL8250_SHARE_IRQS 1
	#else
	#define SERIAL8250_SHARE_IRQS 0
	#endif

	#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \
	{ \
	.iobase = _base, \
	.irq = _irq, \
	.uartclk = 1843200, \
	.iotype = UPIO_PORT, \
	.flags = UPF_BOOT_AUTOCONF \| (_flags), \
	}

	#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)


	static inline int serial_in(struct uart_8250_port *up, int offset)
	{
	return up->port.serial_in(&up->port, offset);
	}

	static inline void serial_out(struct uart_8250_port *up, int offset, int value)
	{
	up->port.serial_out(&up->port, offset, value);
	}

	/**
	* serial_lsr_in - Read LSR register and preserve flags across reads
	* @up: uart 8250 port
	*
	* Read LSR register and handle saving non-preserved flags across reads.
	* The flags that are not preserved across reads are stored into
	* up->lsr_saved_flags.
	*
	* Returns LSR value or'ed with the preserved flags (if any).
	*/
	static inline u16 serial_lsr_in(struct uart_8250_port *up)
	{
	u16 lsr = up->lsr_saved_flags;

	lsr \|= serial_in(up, UART_LSR);
	up->lsr_saved_flags = lsr & up->lsr_save_mask;

	return lsr;
	}

	/*
	* For the 16C950
	*/
	static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
	{
	serial_out(up, UART_SCR, offset);
	serial_out(up, UART_ICR, value);
	}

	static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up,
	int offset)
	{
	unsigned int value;

	serial_icr_write(up, UART_ACR, up->acr \| UART_ACR_ICRRD);
	serial_out(up, UART_SCR, offset);
	value = serial_in(up, UART_ICR);
	serial_icr_write(up, UART_ACR, up->acr);

	return value;
	}

	void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p);

	static inline u32 serial_dl_read(struct uart_8250_port *up)
	{
	return up->dl_read(up);
	}

	static inline void serial_dl_write(struct uart_8250_port *up, u32 value)
	{
	up->dl_write(up, value);
	}

	static inline bool serial8250_set_THRI(struct uart_8250_port *up)
	{
	/* Port locked to synchronize UART_IER access against the console. */
	lockdep_assert_held_once(&up->port.lock);

	if (up->ier & UART_IER_THRI)
	return false;
	up->ier \|= UART_IER_THRI;
	serial_out(up, UART_IER, up->ier);
	return true;
	}

	static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
	{
	/* Port locked to synchronize UART_IER access against the console. */
	lockdep_assert_held_once(&up->port.lock);

	if (!(up->ier & UART_IER_THRI))
	return false;
	up->ier &= ~UART_IER_THRI;
	serial_out(up, UART_IER, up->ier);
	return true;
	}

	struct uart_8250_port *serial8250_get_port(int line);

	void serial8250_rpm_get(struct uart_8250_port *p);
	void serial8250_rpm_put(struct uart_8250_port *p);

	void serial8250_rpm_get_tx(struct uart_8250_port *p);
	void serial8250_rpm_put_tx(struct uart_8250_port *p);

	int serial8250_em485_config(struct uart_port port, struct ktermios termios,
	struct serial_rs485 *rs485);
	void serial8250_em485_start_tx(struct uart_8250_port *p);
	void serial8250_em485_stop_tx(struct uart_8250_port *p);
	void serial8250_em485_destroy(struct uart_8250_port *p);
	extern struct serial_rs485 serial8250_em485_supported;

	/* MCR <-> TIOCM conversion */
	static inline int serial8250_TIOCM_to_MCR(int tiocm)
	{
	int mcr = 0;

	if (tiocm & TIOCM_RTS)
	mcr \|= UART_MCR_RTS;
	if (tiocm & TIOCM_DTR)
	mcr \|= UART_MCR_DTR;
	if (tiocm & TIOCM_OUT1)
	mcr \|= UART_MCR_OUT1;
	if (tiocm & TIOCM_OUT2)
	mcr \|= UART_MCR_OUT2;
	if (tiocm & TIOCM_LOOP)
	mcr \|= UART_MCR_LOOP;

	return mcr;
	}

	static inline int serial8250_MCR_to_TIOCM(int mcr)
	{
	int tiocm = 0;

	if (mcr & UART_MCR_RTS)
	tiocm \|= TIOCM_RTS;
	if (mcr & UART_MCR_DTR)
	tiocm \|= TIOCM_DTR;
	if (mcr & UART_MCR_OUT1)
	tiocm \|= TIOCM_OUT1;
	if (mcr & UART_MCR_OUT2)
	tiocm \|= TIOCM_OUT2;
	if (mcr & UART_MCR_LOOP)
	tiocm \|= TIOCM_LOOP;

	return tiocm;
	}

	/* MSR <-> TIOCM conversion */
	static inline int serial8250_MSR_to_TIOCM(int msr)
	{
	int tiocm = 0;

	if (msr & UART_MSR_DCD)
	tiocm \|= TIOCM_CAR;
	if (msr & UART_MSR_RI)
	tiocm \|= TIOCM_RNG;
	if (msr & UART_MSR_DSR)
	tiocm \|= TIOCM_DSR;
	if (msr & UART_MSR_CTS)
	tiocm \|= TIOCM_CTS;

	return tiocm;
	}

	static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
	{
	serial_out(up, UART_MCR, value);

	if (up->gpios)
	mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value));
	}

	static inline int serial8250_in_MCR(struct uart_8250_port *up)
	{
	int mctrl;

	mctrl = serial_in(up, UART_MCR);

	if (up->gpios) {
	unsigned int mctrl_gpio = 0;

	mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio);
	mctrl \|= serial8250_TIOCM_to_MCR(mctrl_gpio);
	}

	return mctrl;
	}

	bool alpha_jensen(void);
	void alpha_jensen_set_mctrl(struct uart_port *port, unsigned int mctrl);

	#ifdef CONFIG_SERIAL_8250_PNP
	int serial8250_pnp_init(void);
	void serial8250_pnp_exit(void);
	#else
	static inline int serial8250_pnp_init(void) { return 0; }
	static inline void serial8250_pnp_exit(void) { }
	#endif

	#ifdef CONFIG_SERIAL_8250_FINTEK
	int fintek_8250_probe(struct uart_8250_port *uart);
	#else
	static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
	#endif

	#ifdef CONFIG_ARCH_OMAP1
	#include <linux/soc/ti/omap1-soc.h>
	static inline int is_omap1_8250(struct uart_8250_port *pt)
	{
	int res;

	switch (pt->port.mapbase) {
	case OMAP1_UART1_BASE:
	case OMAP1_UART2_BASE:
	case OMAP1_UART3_BASE:
	res = 1;
	break;
	default:
	res = 0;
	break;
	}

	return res;
	}

	static inline int is_omap1510_8250(struct uart_8250_port *pt)
	{
	if (!cpu_is_omap1510())
	return 0;

	return is_omap1_8250(pt);
	}
	#else
	static inline int is_omap1_8250(struct uart_8250_port *pt)
	{
	return 0;
	}
	static inline int is_omap1510_8250(struct uart_8250_port *pt)
	{
	return 0;
	}
	#endif

	#ifdef CONFIG_SERIAL_8250_DMA
	extern int serial8250_tx_dma(struct uart_8250_port *);
	extern int serial8250_rx_dma(struct uart_8250_port *);
	extern void serial8250_rx_dma_flush(struct uart_8250_port *);
	extern int serial8250_request_dma(struct uart_8250_port *);
	extern void serial8250_release_dma(struct uart_8250_port *);

	static inline void serial8250_do_prepare_tx_dma(struct uart_8250_port *p)
	{
	struct uart_8250_dma *dma = p->dma;

	if (dma->prepare_tx_dma)
	dma->prepare_tx_dma(p);
	}

	static inline void serial8250_do_prepare_rx_dma(struct uart_8250_port *p)
	{
	struct uart_8250_dma *dma = p->dma;

	if (dma->prepare_rx_dma)
	dma->prepare_rx_dma(p);
	}

	static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
	{
	struct uart_8250_dma *dma = p->dma;

	return dma && dma->tx_running;
	}
	#else
	static inline int serial8250_tx_dma(struct uart_8250_port *p)
	{
	return -1;
	}
	static inline int serial8250_rx_dma(struct uart_8250_port *p)
	{
	return -1;
	}
	static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { }
	static inline int serial8250_request_dma(struct uart_8250_port *p)
	{
	return -1;
	}
	static inline void serial8250_release_dma(struct uart_8250_port *p) { }

	static inline bool serial8250_tx_dma_running(struct uart_8250_port *p)
	{
	return false;
	}
	#endif

	static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
	{
	unsigned char status;

	status = serial_in(up, 0x04); /* EXCR2 */
	#define PRESL(x) ((x) & 0x30)
	if (PRESL(status) == 0x10) {
	/* already in high speed mode */
	return 0;
	} else {
	status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
	status \|= 0x10; /* 1.625 divisor for baud_base --> 921600 */
	serial_out(up, 0x04, status);
	}
	return 1;
	}

	static inline int serial_index(struct uart_port *port)
	{
	return port->minor - 64;
	}