| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2016, Linaro Limited |
| * Copyright (c) 2014, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/mfd/qcom_rpm.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| |
| #include <dt-bindings/mfd/qcom-rpm.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| |
| #define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63 |
| #define QCOM_RPM_SCALING_ENABLE_ID 0x2 |
| #define QCOM_RPM_XO_MODE_ON 0x2 |
| |
| static const struct clk_parent_data gcc_pxo[] = { |
| { .fw_name = "pxo", .name = "pxo_board" }, |
| }; |
| |
| static const struct clk_parent_data gcc_cxo[] = { |
| { .fw_name = "cxo", .name = "cxo_board" }, |
| }; |
| |
| #define DEFINE_CLK_RPM(_name, r_id) \ |
| static struct clk_rpm clk_rpm_##_name##_a_clk; \ |
| static struct clk_rpm clk_rpm_##_name##_clk = { \ |
| .rpm_clk_id = (r_id), \ |
| .peer = &clk_rpm_##_name##_a_clk, \ |
| .rate = INT_MAX, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_rpm_ops, \ |
| .name = #_name "_clk", \ |
| .parent_data = gcc_pxo, \ |
| .num_parents = ARRAY_SIZE(gcc_pxo), \ |
| }, \ |
| }; \ |
| static struct clk_rpm clk_rpm_##_name##_a_clk = { \ |
| .rpm_clk_id = (r_id), \ |
| .peer = &clk_rpm_##_name##_clk, \ |
| .active_only = true, \ |
| .rate = INT_MAX, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_rpm_ops, \ |
| .name = #_name "_a_clk", \ |
| .parent_data = gcc_pxo, \ |
| .num_parents = ARRAY_SIZE(gcc_pxo), \ |
| }, \ |
| } |
| |
| #define DEFINE_CLK_RPM_XO_BUFFER(_name, offset) \ |
| static struct clk_rpm clk_rpm_##_name##_clk = { \ |
| .rpm_clk_id = QCOM_RPM_CXO_BUFFERS, \ |
| .xo_offset = (offset), \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_rpm_xo_ops, \ |
| .name = #_name "_clk", \ |
| .parent_data = gcc_cxo, \ |
| .num_parents = ARRAY_SIZE(gcc_cxo), \ |
| }, \ |
| } |
| |
| #define DEFINE_CLK_RPM_FIXED(_name, r_id, r) \ |
| static struct clk_rpm clk_rpm_##_name##_clk = { \ |
| .rpm_clk_id = (r_id), \ |
| .rate = (r), \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_rpm_fixed_ops, \ |
| .name = #_name "_clk", \ |
| .parent_data = gcc_pxo, \ |
| .num_parents = ARRAY_SIZE(gcc_pxo), \ |
| }, \ |
| } |
| |
| #define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw) |
| |
| struct rpm_cc; |
| |
| struct clk_rpm { |
| const int rpm_clk_id; |
| const int xo_offset; |
| const bool active_only; |
| unsigned long rate; |
| bool enabled; |
| bool branch; |
| struct clk_rpm *peer; |
| struct clk_hw hw; |
| struct qcom_rpm *rpm; |
| struct rpm_cc *rpm_cc; |
| }; |
| |
| struct rpm_cc { |
| struct qcom_rpm *rpm; |
| struct clk_rpm **clks; |
| size_t num_clks; |
| u32 xo_buffer_value; |
| struct mutex xo_lock; |
| }; |
| |
| struct rpm_clk_desc { |
| struct clk_rpm **clks; |
| size_t num_clks; |
| }; |
| |
| static DEFINE_MUTEX(rpm_clk_lock); |
| |
| static int clk_rpm_handoff(struct clk_rpm *r) |
| { |
| int ret; |
| u32 value = INT_MAX; |
| |
| /* |
| * The vendor tree simply reads the status for this |
| * RPM clock. |
| */ |
| if (r->rpm_clk_id == QCOM_RPM_PLL_4 || |
| r->rpm_clk_id == QCOM_RPM_CXO_BUFFERS) |
| return 0; |
| |
| ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, |
| r->rpm_clk_id, &value, 1); |
| if (ret) |
| return ret; |
| ret = qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE, |
| r->rpm_clk_id, &value, 1); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long rate) |
| { |
| u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */ |
| |
| return qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, |
| r->rpm_clk_id, &value, 1); |
| } |
| |
| static int clk_rpm_set_rate_sleep(struct clk_rpm *r, unsigned long rate) |
| { |
| u32 value = DIV_ROUND_UP(rate, 1000); /* to kHz */ |
| |
| return qcom_rpm_write(r->rpm, QCOM_RPM_SLEEP_STATE, |
| r->rpm_clk_id, &value, 1); |
| } |
| |
| static void to_active_sleep(struct clk_rpm *r, unsigned long rate, |
| unsigned long *active, unsigned long *sleep) |
| { |
| *active = rate; |
| |
| /* |
| * Active-only clocks don't care what the rate is during sleep. So, |
| * they vote for zero. |
| */ |
| if (r->active_only) |
| *sleep = 0; |
| else |
| *sleep = *active; |
| } |
| |
| static int clk_rpm_prepare(struct clk_hw *hw) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| struct clk_rpm *peer = r->peer; |
| unsigned long this_rate = 0, this_sleep_rate = 0; |
| unsigned long peer_rate = 0, peer_sleep_rate = 0; |
| unsigned long active_rate, sleep_rate; |
| int ret = 0; |
| |
| mutex_lock(&rpm_clk_lock); |
| |
| /* Don't send requests to the RPM if the rate has not been set. */ |
| if (!r->rate) |
| goto out; |
| |
| to_active_sleep(r, r->rate, &this_rate, &this_sleep_rate); |
| |
| /* Take peer clock's rate into account only if it's enabled. */ |
| if (peer->enabled) |
| to_active_sleep(peer, peer->rate, |
| &peer_rate, &peer_sleep_rate); |
| |
| active_rate = max(this_rate, peer_rate); |
| |
| if (r->branch) |
| active_rate = !!active_rate; |
| |
| ret = clk_rpm_set_rate_active(r, active_rate); |
| if (ret) |
| goto out; |
| |
| sleep_rate = max(this_sleep_rate, peer_sleep_rate); |
| if (r->branch) |
| sleep_rate = !!sleep_rate; |
| |
| ret = clk_rpm_set_rate_sleep(r, sleep_rate); |
| if (ret) |
| /* Undo the active set vote and restore it */ |
| ret = clk_rpm_set_rate_active(r, peer_rate); |
| |
| out: |
| if (!ret) |
| r->enabled = true; |
| |
| mutex_unlock(&rpm_clk_lock); |
| |
| return ret; |
| } |
| |
| static void clk_rpm_unprepare(struct clk_hw *hw) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| struct clk_rpm *peer = r->peer; |
| unsigned long peer_rate = 0, peer_sleep_rate = 0; |
| unsigned long active_rate, sleep_rate; |
| int ret; |
| |
| mutex_lock(&rpm_clk_lock); |
| |
| if (!r->rate) |
| goto out; |
| |
| /* Take peer clock's rate into account only if it's enabled. */ |
| if (peer->enabled) |
| to_active_sleep(peer, peer->rate, &peer_rate, |
| &peer_sleep_rate); |
| |
| active_rate = r->branch ? !!peer_rate : peer_rate; |
| ret = clk_rpm_set_rate_active(r, active_rate); |
| if (ret) |
| goto out; |
| |
| sleep_rate = r->branch ? !!peer_sleep_rate : peer_sleep_rate; |
| ret = clk_rpm_set_rate_sleep(r, sleep_rate); |
| if (ret) |
| goto out; |
| |
| r->enabled = false; |
| |
| out: |
| mutex_unlock(&rpm_clk_lock); |
| } |
| |
| static int clk_rpm_xo_prepare(struct clk_hw *hw) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| struct rpm_cc *rcc = r->rpm_cc; |
| int ret, clk_id = r->rpm_clk_id; |
| u32 value; |
| |
| mutex_lock(&rcc->xo_lock); |
| |
| value = rcc->xo_buffer_value | (QCOM_RPM_XO_MODE_ON << r->xo_offset); |
| ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, clk_id, &value, 1); |
| if (!ret) { |
| r->enabled = true; |
| rcc->xo_buffer_value = value; |
| } |
| |
| mutex_unlock(&rcc->xo_lock); |
| |
| return ret; |
| } |
| |
| static void clk_rpm_xo_unprepare(struct clk_hw *hw) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| struct rpm_cc *rcc = r->rpm_cc; |
| int ret, clk_id = r->rpm_clk_id; |
| u32 value; |
| |
| mutex_lock(&rcc->xo_lock); |
| |
| value = rcc->xo_buffer_value & ~(QCOM_RPM_XO_MODE_ON << r->xo_offset); |
| ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, clk_id, &value, 1); |
| if (!ret) { |
| r->enabled = false; |
| rcc->xo_buffer_value = value; |
| } |
| |
| mutex_unlock(&rcc->xo_lock); |
| } |
| |
| static int clk_rpm_fixed_prepare(struct clk_hw *hw) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| u32 value = 1; |
| int ret; |
| |
| ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, |
| r->rpm_clk_id, &value, 1); |
| if (!ret) |
| r->enabled = true; |
| |
| return ret; |
| } |
| |
| static void clk_rpm_fixed_unprepare(struct clk_hw *hw) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| u32 value = 0; |
| int ret; |
| |
| ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, |
| r->rpm_clk_id, &value, 1); |
| if (!ret) |
| r->enabled = false; |
| } |
| |
| static int clk_rpm_set_rate(struct clk_hw *hw, |
| unsigned long rate, unsigned long parent_rate) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| struct clk_rpm *peer = r->peer; |
| unsigned long active_rate, sleep_rate; |
| unsigned long this_rate = 0, this_sleep_rate = 0; |
| unsigned long peer_rate = 0, peer_sleep_rate = 0; |
| int ret = 0; |
| |
| mutex_lock(&rpm_clk_lock); |
| |
| if (!r->enabled) |
| goto out; |
| |
| to_active_sleep(r, rate, &this_rate, &this_sleep_rate); |
| |
| /* Take peer clock's rate into account only if it's enabled. */ |
| if (peer->enabled) |
| to_active_sleep(peer, peer->rate, |
| &peer_rate, &peer_sleep_rate); |
| |
| active_rate = max(this_rate, peer_rate); |
| ret = clk_rpm_set_rate_active(r, active_rate); |
| if (ret) |
| goto out; |
| |
| sleep_rate = max(this_sleep_rate, peer_sleep_rate); |
| ret = clk_rpm_set_rate_sleep(r, sleep_rate); |
| if (ret) |
| goto out; |
| |
| r->rate = rate; |
| |
| out: |
| mutex_unlock(&rpm_clk_lock); |
| |
| return ret; |
| } |
| |
| static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| /* |
| * RPM handles rate rounding and we don't have a way to |
| * know what the rate will be, so just return whatever |
| * rate is requested. |
| */ |
| return rate; |
| } |
| |
| static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_rpm *r = to_clk_rpm(hw); |
| |
| /* |
| * RPM handles rate rounding and we don't have a way to |
| * know what the rate will be, so just return whatever |
| * rate was set. |
| */ |
| return r->rate; |
| } |
| |
| static const struct clk_ops clk_rpm_xo_ops = { |
| .prepare = clk_rpm_xo_prepare, |
| .unprepare = clk_rpm_xo_unprepare, |
| }; |
| |
| static const struct clk_ops clk_rpm_fixed_ops = { |
| .prepare = clk_rpm_fixed_prepare, |
| .unprepare = clk_rpm_fixed_unprepare, |
| .round_rate = clk_rpm_round_rate, |
| .recalc_rate = clk_rpm_recalc_rate, |
| }; |
| |
| static const struct clk_ops clk_rpm_ops = { |
| .prepare = clk_rpm_prepare, |
| .unprepare = clk_rpm_unprepare, |
| .set_rate = clk_rpm_set_rate, |
| .round_rate = clk_rpm_round_rate, |
| .recalc_rate = clk_rpm_recalc_rate, |
| }; |
| |
| DEFINE_CLK_RPM(afab, QCOM_RPM_APPS_FABRIC_CLK); |
| DEFINE_CLK_RPM(sfab, QCOM_RPM_SYS_FABRIC_CLK); |
| DEFINE_CLK_RPM(mmfab, QCOM_RPM_MM_FABRIC_CLK); |
| DEFINE_CLK_RPM(daytona, QCOM_RPM_DAYTONA_FABRIC_CLK); |
| DEFINE_CLK_RPM(sfpb, QCOM_RPM_SFPB_CLK); |
| DEFINE_CLK_RPM(cfpb, QCOM_RPM_CFPB_CLK); |
| DEFINE_CLK_RPM(mmfpb, QCOM_RPM_MMFPB_CLK); |
| DEFINE_CLK_RPM(smi, QCOM_RPM_SMI_CLK); |
| DEFINE_CLK_RPM(ebi1, QCOM_RPM_EBI1_CLK); |
| |
| DEFINE_CLK_RPM(qdss, QCOM_RPM_QDSS_CLK); |
| DEFINE_CLK_RPM(nss_fabric_0, QCOM_RPM_NSS_FABRIC_0_CLK); |
| DEFINE_CLK_RPM(nss_fabric_1, QCOM_RPM_NSS_FABRIC_1_CLK); |
| |
| DEFINE_CLK_RPM_FIXED(pll4, QCOM_RPM_PLL_4, 540672000); |
| |
| DEFINE_CLK_RPM_XO_BUFFER(xo_d0, 0); |
| DEFINE_CLK_RPM_XO_BUFFER(xo_d1, 8); |
| DEFINE_CLK_RPM_XO_BUFFER(xo_a0, 16); |
| DEFINE_CLK_RPM_XO_BUFFER(xo_a1, 24); |
| DEFINE_CLK_RPM_XO_BUFFER(xo_a2, 28); |
| |
| static struct clk_rpm *msm8660_clks[] = { |
| [RPM_APPS_FABRIC_CLK] = &clk_rpm_afab_clk, |
| [RPM_APPS_FABRIC_A_CLK] = &clk_rpm_afab_a_clk, |
| [RPM_SYS_FABRIC_CLK] = &clk_rpm_sfab_clk, |
| [RPM_SYS_FABRIC_A_CLK] = &clk_rpm_sfab_a_clk, |
| [RPM_MM_FABRIC_CLK] = &clk_rpm_mmfab_clk, |
| [RPM_MM_FABRIC_A_CLK] = &clk_rpm_mmfab_a_clk, |
| [RPM_DAYTONA_FABRIC_CLK] = &clk_rpm_daytona_clk, |
| [RPM_DAYTONA_FABRIC_A_CLK] = &clk_rpm_daytona_a_clk, |
| [RPM_SFPB_CLK] = &clk_rpm_sfpb_clk, |
| [RPM_SFPB_A_CLK] = &clk_rpm_sfpb_a_clk, |
| [RPM_CFPB_CLK] = &clk_rpm_cfpb_clk, |
| [RPM_CFPB_A_CLK] = &clk_rpm_cfpb_a_clk, |
| [RPM_MMFPB_CLK] = &clk_rpm_mmfpb_clk, |
| [RPM_MMFPB_A_CLK] = &clk_rpm_mmfpb_a_clk, |
| [RPM_SMI_CLK] = &clk_rpm_smi_clk, |
| [RPM_SMI_A_CLK] = &clk_rpm_smi_a_clk, |
| [RPM_EBI1_CLK] = &clk_rpm_ebi1_clk, |
| [RPM_EBI1_A_CLK] = &clk_rpm_ebi1_a_clk, |
| [RPM_PLL4_CLK] = &clk_rpm_pll4_clk, |
| }; |
| |
| static const struct rpm_clk_desc rpm_clk_msm8660 = { |
| .clks = msm8660_clks, |
| .num_clks = ARRAY_SIZE(msm8660_clks), |
| }; |
| |
| static struct clk_rpm *apq8064_clks[] = { |
| [RPM_APPS_FABRIC_CLK] = &clk_rpm_afab_clk, |
| [RPM_APPS_FABRIC_A_CLK] = &clk_rpm_afab_a_clk, |
| [RPM_CFPB_CLK] = &clk_rpm_cfpb_clk, |
| [RPM_CFPB_A_CLK] = &clk_rpm_cfpb_a_clk, |
| [RPM_DAYTONA_FABRIC_CLK] = &clk_rpm_daytona_clk, |
| [RPM_DAYTONA_FABRIC_A_CLK] = &clk_rpm_daytona_a_clk, |
| [RPM_EBI1_CLK] = &clk_rpm_ebi1_clk, |
| [RPM_EBI1_A_CLK] = &clk_rpm_ebi1_a_clk, |
| [RPM_MM_FABRIC_CLK] = &clk_rpm_mmfab_clk, |
| [RPM_MM_FABRIC_A_CLK] = &clk_rpm_mmfab_a_clk, |
| [RPM_MMFPB_CLK] = &clk_rpm_mmfpb_clk, |
| [RPM_MMFPB_A_CLK] = &clk_rpm_mmfpb_a_clk, |
| [RPM_SYS_FABRIC_CLK] = &clk_rpm_sfab_clk, |
| [RPM_SYS_FABRIC_A_CLK] = &clk_rpm_sfab_a_clk, |
| [RPM_SFPB_CLK] = &clk_rpm_sfpb_clk, |
| [RPM_SFPB_A_CLK] = &clk_rpm_sfpb_a_clk, |
| [RPM_QDSS_CLK] = &clk_rpm_qdss_clk, |
| [RPM_QDSS_A_CLK] = &clk_rpm_qdss_a_clk, |
| [RPM_XO_D0] = &clk_rpm_xo_d0_clk, |
| [RPM_XO_D1] = &clk_rpm_xo_d1_clk, |
| [RPM_XO_A0] = &clk_rpm_xo_a0_clk, |
| [RPM_XO_A1] = &clk_rpm_xo_a1_clk, |
| [RPM_XO_A2] = &clk_rpm_xo_a2_clk, |
| }; |
| |
| static const struct rpm_clk_desc rpm_clk_apq8064 = { |
| .clks = apq8064_clks, |
| .num_clks = ARRAY_SIZE(apq8064_clks), |
| }; |
| |
| static struct clk_rpm *ipq806x_clks[] = { |
| [RPM_APPS_FABRIC_CLK] = &clk_rpm_afab_clk, |
| [RPM_APPS_FABRIC_A_CLK] = &clk_rpm_afab_a_clk, |
| [RPM_CFPB_CLK] = &clk_rpm_cfpb_clk, |
| [RPM_CFPB_A_CLK] = &clk_rpm_cfpb_a_clk, |
| [RPM_DAYTONA_FABRIC_CLK] = &clk_rpm_daytona_clk, |
| [RPM_DAYTONA_FABRIC_A_CLK] = &clk_rpm_daytona_a_clk, |
| [RPM_EBI1_CLK] = &clk_rpm_ebi1_clk, |
| [RPM_EBI1_A_CLK] = &clk_rpm_ebi1_a_clk, |
| [RPM_SYS_FABRIC_CLK] = &clk_rpm_sfab_clk, |
| [RPM_SYS_FABRIC_A_CLK] = &clk_rpm_sfab_a_clk, |
| [RPM_SFPB_CLK] = &clk_rpm_sfpb_clk, |
| [RPM_SFPB_A_CLK] = &clk_rpm_sfpb_a_clk, |
| [RPM_NSS_FABRIC_0_CLK] = &clk_rpm_nss_fabric_0_clk, |
| [RPM_NSS_FABRIC_0_A_CLK] = &clk_rpm_nss_fabric_0_a_clk, |
| [RPM_NSS_FABRIC_1_CLK] = &clk_rpm_nss_fabric_1_clk, |
| [RPM_NSS_FABRIC_1_A_CLK] = &clk_rpm_nss_fabric_1_a_clk, |
| }; |
| |
| static const struct rpm_clk_desc rpm_clk_ipq806x = { |
| .clks = ipq806x_clks, |
| .num_clks = ARRAY_SIZE(ipq806x_clks), |
| }; |
| |
| static const struct of_device_id rpm_clk_match_table[] = { |
| { .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 }, |
| { .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 }, |
| { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 }, |
| { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, rpm_clk_match_table); |
| |
| static struct clk_hw *qcom_rpm_clk_hw_get(struct of_phandle_args *clkspec, |
| void *data) |
| { |
| struct rpm_cc *rcc = data; |
| unsigned int idx = clkspec->args[0]; |
| |
| if (idx >= rcc->num_clks) { |
| pr_err("%s: invalid index %u\n", __func__, idx); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| return rcc->clks[idx] ? &rcc->clks[idx]->hw : ERR_PTR(-ENOENT); |
| } |
| |
| static int rpm_clk_probe(struct platform_device *pdev) |
| { |
| struct rpm_cc *rcc; |
| int ret; |
| size_t num_clks, i; |
| struct qcom_rpm *rpm; |
| struct clk_rpm **rpm_clks; |
| const struct rpm_clk_desc *desc; |
| |
| rpm = dev_get_drvdata(pdev->dev.parent); |
| if (!rpm) { |
| dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n"); |
| return -ENODEV; |
| } |
| |
| desc = of_device_get_match_data(&pdev->dev); |
| if (!desc) |
| return -EINVAL; |
| |
| rpm_clks = desc->clks; |
| num_clks = desc->num_clks; |
| |
| rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc), GFP_KERNEL); |
| if (!rcc) |
| return -ENOMEM; |
| |
| rcc->clks = rpm_clks; |
| rcc->num_clks = num_clks; |
| mutex_init(&rcc->xo_lock); |
| |
| for (i = 0; i < num_clks; i++) { |
| if (!rpm_clks[i]) |
| continue; |
| |
| rpm_clks[i]->rpm = rpm; |
| rpm_clks[i]->rpm_cc = rcc; |
| |
| ret = clk_rpm_handoff(rpm_clks[i]); |
| if (ret) |
| goto err; |
| } |
| |
| for (i = 0; i < num_clks; i++) { |
| if (!rpm_clks[i]) |
| continue; |
| |
| ret = devm_clk_hw_register(&pdev->dev, &rpm_clks[i]->hw); |
| if (ret) |
| goto err; |
| } |
| |
| ret = of_clk_add_hw_provider(pdev->dev.of_node, qcom_rpm_clk_hw_get, |
| rcc); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_err(&pdev->dev, "Error registering RPM Clock driver (%d)\n", ret); |
| return ret; |
| } |
| |
| static int rpm_clk_remove(struct platform_device *pdev) |
| { |
| of_clk_del_provider(pdev->dev.of_node); |
| return 0; |
| } |
| |
| static struct platform_driver rpm_clk_driver = { |
| .driver = { |
| .name = "qcom-clk-rpm", |
| .of_match_table = rpm_clk_match_table, |
| }, |
| .probe = rpm_clk_probe, |
| .remove = rpm_clk_remove, |
| }; |
| |
| static int __init rpm_clk_init(void) |
| { |
| return platform_driver_register(&rpm_clk_driver); |
| } |
| core_initcall(rpm_clk_init); |
| |
| static void __exit rpm_clk_exit(void) |
| { |
| platform_driver_unregister(&rpm_clk_driver); |
| } |
| module_exit(rpm_clk_exit); |
| |
| MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:qcom-clk-rpm"); |