drivers/tty/serial/sc26xx.c - linux - Git at Google

 /*
  * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
  *
  * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
 #include <linux/circ_buf.h>
 #include <linux/serial.h>
 #include <linux/sysrq.h>
 #include <linux/console.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/io.h>

 #warning "Please try migrate to use new driver SCCNXP and report the status" \
 	 "in the linux-serial mailing list."

 #if defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
 #endif

 #include <linux/serial_core.h>

 #define SC26XX_MAJOR         204
 #define SC26XX_MINOR_START   205
 #define SC26XX_NR            2

 struct uart_sc26xx_port {
 	struct uart_port      port[2];
 	u8     dsr_mask[2];
 	u8     cts_mask[2];
 	u8     dcd_mask[2];
 	u8     ri_mask[2];
 	u8     dtr_mask[2];
 	u8     rts_mask[2];
 	u8     imr;
 };

 /* register common to both ports */
 #define RD_ISR      0x14
 #define RD_IPR      0x34

 #define WR_ACR      0x10
 #define WR_IMR      0x14
 #define WR_OPCR     0x34
 #define WR_OPR_SET  0x38
 #define WR_OPR_CLR  0x3C

 /* access common register */
 #define READ_SC(p, r)        readb((p)->membase + RD_##r)
 #define WRITE_SC(p, r, v)    writeb((v), (p)->membase + WR_##r)

 /* register per port */
 #define RD_PORT_MRx 0x00
 #define RD_PORT_SR  0x04
 #define RD_PORT_RHR 0x0c

 #define WR_PORT_MRx 0x00
 #define WR_PORT_CSR 0x04
 #define WR_PORT_CR  0x08
 #define WR_PORT_THR 0x0c

 /* SR bits */
 #define SR_BREAK    (1 << 7)
 #define SR_FRAME    (1 << 6)
 #define SR_PARITY   (1 << 5)
 #define SR_OVERRUN  (1 << 4)
 #define SR_TXRDY    (1 << 2)
 #define SR_RXRDY    (1 << 0)

 #define CR_RES_MR   (1 << 4)
 #define CR_RES_RX   (2 << 4)
 #define CR_RES_TX   (3 << 4)
 #define CR_STRT_BRK (6 << 4)
 #define CR_STOP_BRK (7 << 4)
 #define CR_DIS_TX   (1 << 3)
 #define CR_ENA_TX   (1 << 2)
 #define CR_DIS_RX   (1 << 1)
 #define CR_ENA_RX   (1 << 0)

 /* ISR bits */
 #define ISR_RXRDYB  (1 << 5)
 #define ISR_TXRDYB  (1 << 4)
 #define ISR_RXRDYA  (1 << 1)
 #define ISR_TXRDYA  (1 << 0)

 /* IMR bits */
 #define IMR_RXRDY   (1 << 1)
 #define IMR_TXRDY   (1 << 0)

 /* access port register */
 static inline u8 read_sc_port(struct uart_port *p, u8 reg)
 {
 	return readb(p->membase + p->line * 0x20 + reg);
 }

 static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
 {
 	writeb(val, p->membase + p->line * 0x20 + reg);
 }

 #define READ_SC_PORT(p, r)     read_sc_port(p, RD_PORT_##r)
 #define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)

 static void sc26xx_enable_irq(struct uart_port *port, int mask)
 {
 	struct uart_sc26xx_port *up;
 	int line = port->line;

 	port -= line;
 	up = container_of(port, struct uart_sc26xx_port, port[0]);

 	up->imr |= mask << (line * 4);
 	WRITE_SC(port, IMR, up->imr);
 }

 static void sc26xx_disable_irq(struct uart_port *port, int mask)
 {
 	struct uart_sc26xx_port *up;
 	int line = port->line;

 	port -= line;
 	up = container_of(port, struct uart_sc26xx_port, port[0]);

 	up->imr &= ~(mask << (line * 4));
 	WRITE_SC(port, IMR, up->imr);
 }

 static struct tty_struct *receive_chars(struct uart_port *port)
 {
 	struct tty_struct *tty = NULL;
 	int limit = 10000;
 	unsigned char ch;
 	char flag;
 	u8 status;

 	if (port->state != NULL)		/* Unopened serial console */
 		tty = port->state->port.tty;

 	while (limit-- > 0) {
 		status = READ_SC_PORT(port, SR);
 		if (!(status & SR_RXRDY))
 			break;
 		ch = READ_SC_PORT(port, RHR);

 		flag = TTY_NORMAL;
 		port->icount.rx++;

 		if (unlikely(status & (SR_BREAK | SR_FRAME |
 				       SR_PARITY | SR_OVERRUN))) {
 			if (status & SR_BREAK) {
 				status &= ~(SR_PARITY | SR_FRAME);
 				port->icount.brk++;
 				if (uart_handle_break(port))
 					continue;
 			} else if (status & SR_PARITY)
 				port->icount.parity++;
 			else if (status & SR_FRAME)
 				port->icount.frame++;
 			if (status & SR_OVERRUN)
 				port->icount.overrun++;

 			status &= port->read_status_mask;
 			if (status & SR_BREAK)
 				flag = TTY_BREAK;
 			else if (status & SR_PARITY)
 				flag = TTY_PARITY;
 			else if (status & SR_FRAME)
 				flag = TTY_FRAME;
 		}

 		if (uart_handle_sysrq_char(port, ch))
 			continue;

 		if (status & port->ignore_status_mask)
 			continue;

 		tty_insert_flip_char(tty, ch, flag);
 	}
 	return tty;
 }

 static void transmit_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit;

 	if (!port->state)
 		return;

 	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		sc26xx_disable_irq(port, IMR_TXRDY);
 		return;
 	}
 	while (!uart_circ_empty(xmit)) {
 		if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
 			break;

 		WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 	}
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 }

 static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
 {
 	struct uart_sc26xx_port *up = dev_id;
 	struct tty_struct *tty;
 	unsigned long flags;
 	u8 isr;

 	spin_lock_irqsave(&up->port[0].lock, flags);

 	tty = NULL;
 	isr = READ_SC(&up->port[0], ISR);
 	if (isr & ISR_TXRDYA)
 	    transmit_chars(&up->port[0]);
 	if (isr & ISR_RXRDYA)
 	    tty = receive_chars(&up->port[0]);

 	spin_unlock(&up->port[0].lock);

 	if (tty)
 		tty_flip_buffer_push(tty);

 	spin_lock(&up->port[1].lock);

 	tty = NULL;
 	if (isr & ISR_TXRDYB)
 	    transmit_chars(&up->port[1]);
 	if (isr & ISR_RXRDYB)
 	    tty = receive_chars(&up->port[1]);

 	spin_unlock_irqrestore(&up->port[1].lock, flags);

 	if (tty)
 		tty_flip_buffer_push(tty);

 	return IRQ_HANDLED;
 }

 /* port->lock is not held.  */
 static unsigned int sc26xx_tx_empty(struct uart_port *port)
 {
 	return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
 }

 /* port->lock held by caller.  */
 static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	struct uart_sc26xx_port *up;
 	int line = port->line;

 	port -= line;
 	up = container_of(port, struct uart_sc26xx_port, port[0]);

 	if (up->dtr_mask[line]) {
 		if (mctrl & TIOCM_DTR)
 			WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
 		else
 			WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
 	}
 	if (up->rts_mask[line]) {
 		if (mctrl & TIOCM_RTS)
 			WRITE_SC(port, OPR_SET, up->rts_mask[line]);
 		else
 			WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
 	}
 }

 /* port->lock is held by caller and interrupts are disabled.  */
 static unsigned int sc26xx_get_mctrl(struct uart_port *port)
 {
 	struct uart_sc26xx_port *up;
 	int line = port->line;
 	unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
 	u8 ipr;

 	port -= line;
 	up = container_of(port, struct uart_sc26xx_port, port[0]);
 	ipr = READ_SC(port, IPR) ^ 0xff;

 	if (up->dsr_mask[line]) {
 		mctrl &= ~TIOCM_DSR;
 		mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
 	}
 	if (up->cts_mask[line]) {
 		mctrl &= ~TIOCM_CTS;
 		mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
 	}
 	if (up->dcd_mask[line]) {
 		mctrl &= ~TIOCM_CAR;
 		mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
 	}
 	if (up->ri_mask[line]) {
 		mctrl &= ~TIOCM_RNG;
 		mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
 	}
 	return mctrl;
 }

 /* port->lock held by caller.  */
 static void sc26xx_stop_tx(struct uart_port *port)
 {
 	return;
 }

 /* port->lock held by caller.  */
 static void sc26xx_start_tx(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->state->xmit;

 	while (!uart_circ_empty(xmit)) {
 		if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
 			sc26xx_enable_irq(port, IMR_TXRDY);
 			break;
 		}
 		WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
 	}
 }

 /* port->lock held by caller.  */
 static void sc26xx_stop_rx(struct uart_port *port)
 {
 }

 /* port->lock held by caller.  */
 static void sc26xx_enable_ms(struct uart_port *port)
 {
 }

 /* port->lock is not held.  */
 static void sc26xx_break_ctl(struct uart_port *port, int break_state)
 {
 	if (break_state == -1)
 		WRITE_SC_PORT(port, CR, CR_STRT_BRK);
 	else
 		WRITE_SC_PORT(port, CR, CR_STOP_BRK);
 }

 /* port->lock is not held.  */
 static int sc26xx_startup(struct uart_port *port)
 {
 	sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);
 	WRITE_SC(port, OPCR, 0);

 	/* reset tx and rx */
 	WRITE_SC_PORT(port, CR, CR_RES_RX);
 	WRITE_SC_PORT(port, CR, CR_RES_TX);

 	/* start rx/tx */
 	WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);

 	/* enable irqs */
 	sc26xx_enable_irq(port, IMR_RXRDY);
 	return 0;
 }

 /* port->lock is not held.  */
 static void sc26xx_shutdown(struct uart_port *port)
 {
 	/* disable interrupst */
 	sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY);

 	/* stop tx/rx */
 	WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);
 }

 /* port->lock is not held.  */
 static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios,
 			      struct ktermios *old)
 {
 	unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
 	unsigned int quot = uart_get_divisor(port, baud);
 	unsigned int iflag, cflag;
 	unsigned long flags;
 	u8 mr1, mr2, csr;

 	spin_lock_irqsave(&port->lock, flags);

 	while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
 		udelay(2);

 	WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX);

 	iflag = termios->c_iflag;
 	cflag = termios->c_cflag;

 	port->read_status_mask = SR_OVERRUN;
 	if (iflag & INPCK)
 		port->read_status_mask |= SR_PARITY | SR_FRAME;
 	if (iflag & (BRKINT | PARMRK))
 		port->read_status_mask |= SR_BREAK;

 	port->ignore_status_mask = 0;
 	if (iflag & IGNBRK)
 		port->ignore_status_mask |= SR_BREAK;
 	if ((cflag & CREAD) == 0)
 		port->ignore_status_mask |= SR_BREAK | SR_FRAME |
 					    SR_PARITY | SR_OVERRUN;

 	switch (cflag & CSIZE) {
 	case CS5:
 		mr1 = 0x00;
 		break;
 	case CS6:
 		mr1 = 0x01;
 		break;
 	case CS7:
 		mr1 = 0x02;
 		break;
 	default:
 	case CS8:
 		mr1 = 0x03;
 		break;
 	}
 	mr2 = 0x07;
 	if (cflag & CSTOPB)
 		mr2 = 0x0f;
 	if (cflag & PARENB) {
 		if (cflag & PARODD)
 			mr1 |= (1 << 2);
 	} else
 		mr1 |= (2 << 3);

 	switch (baud) {
 	case 50:
 		csr = 0x00;
 		break;
 	case 110:
 		csr = 0x11;
 		break;
 	case 134:
 		csr = 0x22;
 		break;
 	case 200:
 		csr = 0x33;
 		break;
 	case 300:
 		csr = 0x44;
 		break;
 	case 600:
 		csr = 0x55;
 		break;
 	case 1200:
 		csr = 0x66;
 		break;
 	case 2400:
 		csr = 0x88;
 		break;
 	case 4800:
 		csr = 0x99;
 		break;
 	default:
 	case 9600:
 		csr = 0xbb;
 		break;
 	case 19200:
 		csr = 0xcc;
 		break;
 	}

 	WRITE_SC_PORT(port, CR, CR_RES_MR);
 	WRITE_SC_PORT(port, MRx, mr1);
 	WRITE_SC_PORT(port, MRx, mr2);

 	WRITE_SC(port, ACR, 0x80);
 	WRITE_SC_PORT(port, CSR, csr);

 	/* reset tx and rx */
 	WRITE_SC_PORT(port, CR, CR_RES_RX);
 	WRITE_SC_PORT(port, CR, CR_RES_TX);

 	WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX);
 	while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc)
 		udelay(2);

 	/* XXX */
 	uart_update_timeout(port, cflag,
 			    (port->uartclk / (16 * quot)));

 	spin_unlock_irqrestore(&port->lock, flags);
 }

 static const char *sc26xx_type(struct uart_port *port)
 {
 	return "SC26XX";
 }

 static void sc26xx_release_port(struct uart_port *port)
 {
 }

 static int sc26xx_request_port(struct uart_port *port)
 {
 	return 0;
 }

 static void sc26xx_config_port(struct uart_port *port, int flags)
 {
 }

 static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
 	return -EINVAL;
 }

 static struct uart_ops sc26xx_ops = {
 	.tx_empty	= sc26xx_tx_empty,
 	.set_mctrl	= sc26xx_set_mctrl,
 	.get_mctrl	= sc26xx_get_mctrl,
 	.stop_tx	= sc26xx_stop_tx,
 	.start_tx	= sc26xx_start_tx,
 	.stop_rx	= sc26xx_stop_rx,
 	.enable_ms	= sc26xx_enable_ms,
 	.break_ctl	= sc26xx_break_ctl,
 	.startup	= sc26xx_startup,
 	.shutdown	= sc26xx_shutdown,
 	.set_termios	= sc26xx_set_termios,
 	.type		= sc26xx_type,
 	.release_port	= sc26xx_release_port,
 	.request_port	= sc26xx_request_port,
 	.config_port	= sc26xx_config_port,
 	.verify_port	= sc26xx_verify_port,
 };

 static struct uart_port *sc26xx_port;

 #ifdef CONFIG_SERIAL_SC26XX_CONSOLE
 static void sc26xx_console_putchar(struct uart_port *port, char c)
 {
 	unsigned long flags;
 	int limit = 1000000;

 	spin_lock_irqsave(&port->lock, flags);

 	while (limit-- > 0) {
 		if (READ_SC_PORT(port, SR) & SR_TXRDY) {
 			WRITE_SC_PORT(port, THR, c);
 			break;
 		}
 		udelay(2);
 	}

 	spin_unlock_irqrestore(&port->lock, flags);
 }

 static void sc26xx_console_write(struct console *con, const char *s, unsigned n)
 {
 	struct uart_port *port = sc26xx_port;
 	int i;

 	for (i = 0; i < n; i++) {
 		if (*s == '\n')
 			sc26xx_console_putchar(port, '\r');
 		sc26xx_console_putchar(port, *s++);
 	}
 }

 static int __init sc26xx_console_setup(struct console *con, char *options)
 {
 	struct uart_port *port = sc26xx_port;
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';

 	if (port->type != PORT_SC26XX)
 		return -1;

 	printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);

 	return uart_set_options(port, con, baud, parity, bits, flow);
 }

 static struct uart_driver sc26xx_reg;
 static struct console sc26xx_console = {
 	.name	=	"ttySC",
 	.write	=	sc26xx_console_write,
 	.device	=	uart_console_device,
 	.setup  =       sc26xx_console_setup,
 	.flags	=	CON_PRINTBUFFER,
 	.index	=	-1,
 	.data	=	&sc26xx_reg,
 };
 #define SC26XX_CONSOLE   &sc26xx_console
 #else
 #define SC26XX_CONSOLE   NULL
 #endif

 static struct uart_driver sc26xx_reg = {
 	.owner			= THIS_MODULE,
 	.driver_name		= "SC26xx",
 	.dev_name		= "ttySC",
 	.major			= SC26XX_MAJOR,
 	.minor			= SC26XX_MINOR_START,
 	.nr			= SC26XX_NR,
 	.cons                   = SC26XX_CONSOLE,
 };

 static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
 {
 	unsigned int bit = (flags >> bitpos) & 15;

 	return bit ? (1 << (bit - 1)) : 0;
 }

 static void sc26xx_init_masks(struct uart_sc26xx_port *up,
 					int line, unsigned int data)
 {
 	up->dtr_mask[line] = sc26xx_flags2mask(data,  0);
 	up->rts_mask[line] = sc26xx_flags2mask(data,  4);
 	up->dsr_mask[line] = sc26xx_flags2mask(data,  8);
 	up->cts_mask[line] = sc26xx_flags2mask(data, 12);
 	up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
 	up->ri_mask[line]  = sc26xx_flags2mask(data, 20);
 }

 static int sc26xx_probe(struct platform_device *dev)
 {
 	struct resource *res;
 	struct uart_sc26xx_port *up;
 	unsigned int *sc26xx_data = dev->dev.platform_data;
 	int err;

 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENODEV;

 	up = kzalloc(sizeof *up, GFP_KERNEL);
 	if (unlikely(!up))
 		return -ENOMEM;

 	up->port[0].line = 0;
 	up->port[0].ops = &sc26xx_ops;
 	up->port[0].type = PORT_SC26XX;
 	up->port[0].uartclk = (29491200 / 16); /* arbitrary */

 	up->port[0].mapbase = res->start;
 	up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
 	up->port[0].iotype = UPIO_MEM;
 	up->port[0].irq = platform_get_irq(dev, 0);

 	up->port[0].dev = &dev->dev;

 	sc26xx_init_masks(up, 0, sc26xx_data[0]);

 	sc26xx_port = &up->port[0];

 	up->port[1].line = 1;
 	up->port[1].ops = &sc26xx_ops;
 	up->port[1].type = PORT_SC26XX;
 	up->port[1].uartclk = (29491200 / 16); /* arbitrary */

 	up->port[1].mapbase = up->port[0].mapbase;
 	up->port[1].membase = up->port[0].membase;
 	up->port[1].iotype = UPIO_MEM;
 	up->port[1].irq = up->port[0].irq;

 	up->port[1].dev = &dev->dev;

 	sc26xx_init_masks(up, 1, sc26xx_data[1]);

 	err = uart_register_driver(&sc26xx_reg);
 	if (err)
 		goto out_free_port;

 	sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;

 	err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
 	if (err)
 		goto out_unregister_driver;

 	err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
 	if (err)
 		goto out_remove_port0;

 	err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
 	if (err)
 		goto out_remove_ports;

 	dev_set_drvdata(&dev->dev, up);
 	return 0;

 out_remove_ports:
 	uart_remove_one_port(&sc26xx_reg, &up->port[1]);
 out_remove_port0:
 	uart_remove_one_port(&sc26xx_reg, &up->port[0]);

 out_unregister_driver:
 	uart_unregister_driver(&sc26xx_reg);

 out_free_port:
 	kfree(up);
 	sc26xx_port = NULL;
 	return err;
 }


 static int __exit sc26xx_driver_remove(struct platform_device *dev)
 {
 	struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev);

 	free_irq(up->port[0].irq, up);

 	uart_remove_one_port(&sc26xx_reg, &up->port[0]);
 	uart_remove_one_port(&sc26xx_reg, &up->port[1]);

 	uart_unregister_driver(&sc26xx_reg);

 	kfree(up);
 	sc26xx_port = NULL;

 	dev_set_drvdata(&dev->dev, NULL);
 	return 0;
 }

 static struct platform_driver sc26xx_driver = {
 	.probe	= sc26xx_probe,
 	.remove	= sc26xx_driver_remove,
 	.driver	= {
 		.name	= "SC26xx",
 		.owner	= THIS_MODULE,
 	},
 };

 module_platform_driver(sc26xx_driver);

 MODULE_AUTHOR("Thomas Bogendörfer");
 MODULE_DESCRIPTION("SC681/SC2692 serial driver");
 MODULE_VERSION("1.0");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:SC26xx");
	/*
	* SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices.
	*
	* Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de)
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/errno.h>
	#include <linux/tty.h>
	#include <linux/tty_flip.h>
	#include <linux/major.h>
	#include <linux/circ_buf.h>
	#include <linux/serial.h>
	#include <linux/sysrq.h>
	#include <linux/console.h>
	#include <linux/spinlock.h>
	#include <linux/slab.h>
	#include <linux/delay.h>
	#include <linux/init.h>
	#include <linux/platform_device.h>
	#include <linux/irq.h>
	#include <linux/io.h>

	#warning "Please try migrate to use new driver SCCNXP and report the status" \
	"in the linux-serial mailing list."

	#if defined(CONFIG_MAGIC_SYSRQ)
	#define SUPPORT_SYSRQ
	#endif

	#include <linux/serial_core.h>

	#define SC26XX_MAJOR 204
	#define SC26XX_MINOR_START 205
	#define SC26XX_NR 2

	struct uart_sc26xx_port {
	struct uart_port port[2];
	u8 dsr_mask[2];
	u8 cts_mask[2];
	u8 dcd_mask[2];
	u8 ri_mask[2];
	u8 dtr_mask[2];
	u8 rts_mask[2];
	u8 imr;
	};

	/* register common to both ports */
	#define RD_ISR 0x14
	#define RD_IPR 0x34

	#define WR_ACR 0x10
	#define WR_IMR 0x14
	#define WR_OPCR 0x34
	#define WR_OPR_SET 0x38
	#define WR_OPR_CLR 0x3C

	/* access common register */
	#define READ_SC(p, r) readb((p)->membase + RD_##r)
	#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r)

	/* register per port */
	#define RD_PORT_MRx 0x00
	#define RD_PORT_SR 0x04
	#define RD_PORT_RHR 0x0c

	#define WR_PORT_MRx 0x00
	#define WR_PORT_CSR 0x04
	#define WR_PORT_CR 0x08
	#define WR_PORT_THR 0x0c

	/* SR bits */
	#define SR_BREAK (1 << 7)
	#define SR_FRAME (1 << 6)
	#define SR_PARITY (1 << 5)
	#define SR_OVERRUN (1 << 4)
	#define SR_TXRDY (1 << 2)
	#define SR_RXRDY (1 << 0)

	#define CR_RES_MR (1 << 4)
	#define CR_RES_RX (2 << 4)
	#define CR_RES_TX (3 << 4)
	#define CR_STRT_BRK (6 << 4)
	#define CR_STOP_BRK (7 << 4)
	#define CR_DIS_TX (1 << 3)
	#define CR_ENA_TX (1 << 2)
	#define CR_DIS_RX (1 << 1)
	#define CR_ENA_RX (1 << 0)

	/* ISR bits */
	#define ISR_RXRDYB (1 << 5)
	#define ISR_TXRDYB (1 << 4)
	#define ISR_RXRDYA (1 << 1)
	#define ISR_TXRDYA (1 << 0)

	/* IMR bits */
	#define IMR_RXRDY (1 << 1)
	#define IMR_TXRDY (1 << 0)

	/* access port register */
	static inline u8 read_sc_port(struct uart_port *p, u8 reg)
	{
	return readb(p->membase + p->line * 0x20 + reg);
	}

	static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val)
	{
	writeb(val, p->membase + p->line * 0x20 + reg);
	}

	#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r)
	#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v)

	static void sc26xx_enable_irq(struct uart_port *port, int mask)
	{
	struct uart_sc26xx_port *up;
	int line = port->line;

	port -= line;
	up = container_of(port, struct uart_sc26xx_port, port[0]);

	up->imr \|= mask << (line * 4);
	WRITE_SC(port, IMR, up->imr);
	}

	static void sc26xx_disable_irq(struct uart_port *port, int mask)
	{
	struct uart_sc26xx_port *up;
	int line = port->line;

	port -= line;
	up = container_of(port, struct uart_sc26xx_port, port[0]);

	up->imr &= ~(mask << (line * 4));
	WRITE_SC(port, IMR, up->imr);
	}

	static struct tty_struct receive_chars(struct uart_port port)
	{
	struct tty_struct *tty = NULL;
	int limit = 10000;
	unsigned char ch;
	char flag;
	u8 status;

	if (port->state != NULL) /* Unopened serial console */
	tty = port->state->port.tty;

	while (limit-- > 0) {
	status = READ_SC_PORT(port, SR);
	if (!(status & SR_RXRDY))
	break;
	ch = READ_SC_PORT(port, RHR);

	flag = TTY_NORMAL;
	port->icount.rx++;

	if (unlikely(status & (SR_BREAK \| SR_FRAME \|
	SR_PARITY \| SR_OVERRUN))) {
	if (status & SR_BREAK) {
	status &= ~(SR_PARITY \| SR_FRAME);
	port->icount.brk++;
	if (uart_handle_break(port))
	continue;
	} else if (status & SR_PARITY)
	port->icount.parity++;
	else if (status & SR_FRAME)
	port->icount.frame++;
	if (status & SR_OVERRUN)
	port->icount.overrun++;

	status &= port->read_status_mask;
	if (status & SR_BREAK)
	flag = TTY_BREAK;
	else if (status & SR_PARITY)
	flag = TTY_PARITY;
	else if (status & SR_FRAME)
	flag = TTY_FRAME;
	}

	if (uart_handle_sysrq_char(port, ch))
	continue;

	if (status & port->ignore_status_mask)
	continue;

	tty_insert_flip_char(tty, ch, flag);
	}
	return tty;
	}

	static void transmit_chars(struct uart_port *port)
	{
	struct circ_buf *xmit;

	if (!port->state)
	return;

	xmit = &port->state->xmit;
	if (uart_circ_empty(xmit) \|\| uart_tx_stopped(port)) {
	sc26xx_disable_irq(port, IMR_TXRDY);
	return;
	}
	while (!uart_circ_empty(xmit)) {
	if (!(READ_SC_PORT(port, SR) & SR_TXRDY))
	break;

	WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
	port->icount.tx++;
	}
	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
	uart_write_wakeup(port);
	}

	static irqreturn_t sc26xx_interrupt(int irq, void *dev_id)
	{
	struct uart_sc26xx_port *up = dev_id;
	struct tty_struct *tty;
	unsigned long flags;
	u8 isr;

	spin_lock_irqsave(&up->port[0].lock, flags);

	tty = NULL;
	isr = READ_SC(&up->port[0], ISR);
	if (isr & ISR_TXRDYA)
	transmit_chars(&up->port[0]);
	if (isr & ISR_RXRDYA)
	tty = receive_chars(&up->port[0]);

	spin_unlock(&up->port[0].lock);

	if (tty)
	tty_flip_buffer_push(tty);

	spin_lock(&up->port[1].lock);

	tty = NULL;
	if (isr & ISR_TXRDYB)
	transmit_chars(&up->port[1]);
	if (isr & ISR_RXRDYB)
	tty = receive_chars(&up->port[1]);

	spin_unlock_irqrestore(&up->port[1].lock, flags);

	if (tty)
	tty_flip_buffer_push(tty);

	return IRQ_HANDLED;
	}

	/* port->lock is not held. */
	static unsigned int sc26xx_tx_empty(struct uart_port *port)
	{
	return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0;
	}

	/* port->lock held by caller. */
	static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
	{
	struct uart_sc26xx_port *up;
	int line = port->line;

	port -= line;
	up = container_of(port, struct uart_sc26xx_port, port[0]);

	if (up->dtr_mask[line]) {
	if (mctrl & TIOCM_DTR)
	WRITE_SC(port, OPR_SET, up->dtr_mask[line]);
	else
	WRITE_SC(port, OPR_CLR, up->dtr_mask[line]);
	}
	if (up->rts_mask[line]) {
	if (mctrl & TIOCM_RTS)
	WRITE_SC(port, OPR_SET, up->rts_mask[line]);
	else
	WRITE_SC(port, OPR_CLR, up->rts_mask[line]);
	}
	}

	/* port->lock is held by caller and interrupts are disabled. */
	static unsigned int sc26xx_get_mctrl(struct uart_port *port)
	{
	struct uart_sc26xx_port *up;
	int line = port->line;
	unsigned int mctrl = TIOCM_DSR \| TIOCM_CTS \| TIOCM_CAR;
	u8 ipr;

	port -= line;
	up = container_of(port, struct uart_sc26xx_port, port[0]);
	ipr = READ_SC(port, IPR) ^ 0xff;

	if (up->dsr_mask[line]) {
	mctrl &= ~TIOCM_DSR;
	mctrl \|= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0;
	}
	if (up->cts_mask[line]) {
	mctrl &= ~TIOCM_CTS;
	mctrl \|= ipr & up->cts_mask[line] ? TIOCM_CTS : 0;
	}
	if (up->dcd_mask[line]) {
	mctrl &= ~TIOCM_CAR;
	mctrl \|= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0;
	}
	if (up->ri_mask[line]) {
	mctrl &= ~TIOCM_RNG;
	mctrl \|= ipr & up->ri_mask[line] ? TIOCM_RNG : 0;
	}
	return mctrl;
	}

	/* port->lock held by caller. */
	static void sc26xx_stop_tx(struct uart_port *port)
	{
	return;
	}

	/* port->lock held by caller. */
	static void sc26xx_start_tx(struct uart_port *port)
	{
	struct circ_buf *xmit = &port->state->xmit;

	while (!uart_circ_empty(xmit)) {
	if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
	sc26xx_enable_irq(port, IMR_TXRDY);
	break;
	}
	WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]);
	xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
	port->icount.tx++;
	}
	}

	/* port->lock held by caller. */
	static void sc26xx_stop_rx(struct uart_port *port)
	{
	}

	/* port->lock held by caller. */
	static void sc26xx_enable_ms(struct uart_port *port)
	{
	}

	/* port->lock is not held. */
	static void sc26xx_break_ctl(struct uart_port *port, int break_state)
	{
	if (break_state == -1)
	WRITE_SC_PORT(port, CR, CR_STRT_BRK);
	else
	WRITE_SC_PORT(port, CR, CR_STOP_BRK);
	}

	/* port->lock is not held. */
	static int sc26xx_startup(struct uart_port *port)
	{
	sc26xx_disable_irq(port, IMR_TXRDY \| IMR_RXRDY);
	WRITE_SC(port, OPCR, 0);

	/* reset tx and rx */
	WRITE_SC_PORT(port, CR, CR_RES_RX);
	WRITE_SC_PORT(port, CR, CR_RES_TX);

	/* start rx/tx */
	WRITE_SC_PORT(port, CR, CR_ENA_TX \| CR_ENA_RX);

	/* enable irqs */
	sc26xx_enable_irq(port, IMR_RXRDY);
	return 0;
	}

	/* port->lock is not held. */
	static void sc26xx_shutdown(struct uart_port *port)
	{
	/* disable interrupst */
	sc26xx_disable_irq(port, IMR_TXRDY \| IMR_RXRDY);

	/* stop tx/rx */
	WRITE_SC_PORT(port, CR, CR_DIS_TX \| CR_DIS_RX);
	}

	/* port->lock is not held. */
	static void sc26xx_set_termios(struct uart_port port, struct ktermios termios,
	struct ktermios *old)
	{
	unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
	unsigned int quot = uart_get_divisor(port, baud);
	unsigned int iflag, cflag;
	unsigned long flags;
	u8 mr1, mr2, csr;

	spin_lock_irqsave(&port->lock, flags);

	while ((READ_SC_PORT(port, SR) & ((1 << 3) \| (1 << 2))) != 0xc)
	udelay(2);

	WRITE_SC_PORT(port, CR, CR_DIS_TX \| CR_DIS_RX);

	iflag = termios->c_iflag;
	cflag = termios->c_cflag;

	port->read_status_mask = SR_OVERRUN;
	if (iflag & INPCK)
	port->read_status_mask \|= SR_PARITY \| SR_FRAME;
	if (iflag & (BRKINT \| PARMRK))
	port->read_status_mask \|= SR_BREAK;

	port->ignore_status_mask = 0;
	if (iflag & IGNBRK)
	port->ignore_status_mask \|= SR_BREAK;
	if ((cflag & CREAD) == 0)
	port->ignore_status_mask \|= SR_BREAK \| SR_FRAME \|
	SR_PARITY \| SR_OVERRUN;

	switch (cflag & CSIZE) {
	case CS5:
	mr1 = 0x00;
	break;
	case CS6:
	mr1 = 0x01;
	break;
	case CS7:
	mr1 = 0x02;
	break;
	default:
	case CS8:
	mr1 = 0x03;
	break;
	}
	mr2 = 0x07;
	if (cflag & CSTOPB)
	mr2 = 0x0f;
	if (cflag & PARENB) {
	if (cflag & PARODD)
	mr1 \|= (1 << 2);
	} else
	mr1 \|= (2 << 3);

	switch (baud) {
	case 50:
	csr = 0x00;
	break;
	case 110:
	csr = 0x11;
	break;
	case 134:
	csr = 0x22;
	break;
	case 200:
	csr = 0x33;
	break;
	case 300:
	csr = 0x44;
	break;
	case 600:
	csr = 0x55;
	break;
	case 1200:
	csr = 0x66;
	break;
	case 2400:
	csr = 0x88;
	break;
	case 4800:
	csr = 0x99;
	break;
	default:
	case 9600:
	csr = 0xbb;
	break;
	case 19200:
	csr = 0xcc;
	break;
	}

	WRITE_SC_PORT(port, CR, CR_RES_MR);
	WRITE_SC_PORT(port, MRx, mr1);
	WRITE_SC_PORT(port, MRx, mr2);

	WRITE_SC(port, ACR, 0x80);
	WRITE_SC_PORT(port, CSR, csr);

	/* reset tx and rx */
	WRITE_SC_PORT(port, CR, CR_RES_RX);
	WRITE_SC_PORT(port, CR, CR_RES_TX);

	WRITE_SC_PORT(port, CR, CR_ENA_TX \| CR_ENA_RX);
	while ((READ_SC_PORT(port, SR) & ((1 << 3) \| (1 << 2))) != 0xc)
	udelay(2);

	/* XXX */
	uart_update_timeout(port, cflag,
	(port->uartclk / (16 * quot)));

	spin_unlock_irqrestore(&port->lock, flags);
	}

	static const char sc26xx_type(struct uart_port port)
	{
	return "SC26XX";
	}

	static void sc26xx_release_port(struct uart_port *port)
	{
	}

	static int sc26xx_request_port(struct uart_port *port)
	{
	return 0;
	}

	static void sc26xx_config_port(struct uart_port *port, int flags)
	{
	}

	static int sc26xx_verify_port(struct uart_port port, struct serial_struct ser)
	{
	return -EINVAL;
	}

	static struct uart_ops sc26xx_ops = {
	.tx_empty = sc26xx_tx_empty,
	.set_mctrl = sc26xx_set_mctrl,
	.get_mctrl = sc26xx_get_mctrl,
	.stop_tx = sc26xx_stop_tx,
	.start_tx = sc26xx_start_tx,
	.stop_rx = sc26xx_stop_rx,
	.enable_ms = sc26xx_enable_ms,
	.break_ctl = sc26xx_break_ctl,
	.startup = sc26xx_startup,
	.shutdown = sc26xx_shutdown,
	.set_termios = sc26xx_set_termios,
	.type = sc26xx_type,
	.release_port = sc26xx_release_port,
	.request_port = sc26xx_request_port,
	.config_port = sc26xx_config_port,
	.verify_port = sc26xx_verify_port,
	};

	static struct uart_port *sc26xx_port;

	#ifdef CONFIG_SERIAL_SC26XX_CONSOLE
	static void sc26xx_console_putchar(struct uart_port *port, char c)
	{
	unsigned long flags;
	int limit = 1000000;

	spin_lock_irqsave(&port->lock, flags);

	while (limit-- > 0) {
	if (READ_SC_PORT(port, SR) & SR_TXRDY) {
	WRITE_SC_PORT(port, THR, c);
	break;
	}
	udelay(2);
	}

	spin_unlock_irqrestore(&port->lock, flags);
	}

	static void sc26xx_console_write(struct console con, const char s, unsigned n)
	{
	struct uart_port *port = sc26xx_port;
	int i;

	for (i = 0; i < n; i++) {
	if (*s == '\n')
	sc26xx_console_putchar(port, '\r');
	sc26xx_console_putchar(port, *s++);
	}
	}

	static int __init sc26xx_console_setup(struct console con, char options)
	{
	struct uart_port *port = sc26xx_port;
	int baud = 9600;
	int bits = 8;
	int parity = 'n';
	int flow = 'n';

	if (port->type != PORT_SC26XX)
	return -1;

	printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index);
	if (options)
	uart_parse_options(options, &baud, &parity, &bits, &flow);

	return uart_set_options(port, con, baud, parity, bits, flow);
	}

	static struct uart_driver sc26xx_reg;
	static struct console sc26xx_console = {
	.name = "ttySC",
	.write = sc26xx_console_write,
	.device = uart_console_device,
	.setup = sc26xx_console_setup,
	.flags = CON_PRINTBUFFER,
	.index = -1,
	.data = &sc26xx_reg,
	};
	#define SC26XX_CONSOLE &sc26xx_console
	#else
	#define SC26XX_CONSOLE NULL
	#endif

	static struct uart_driver sc26xx_reg = {
	.owner = THIS_MODULE,
	.driver_name = "SC26xx",
	.dev_name = "ttySC",
	.major = SC26XX_MAJOR,
	.minor = SC26XX_MINOR_START,
	.nr = SC26XX_NR,
	.cons = SC26XX_CONSOLE,
	};

	static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos)
	{
	unsigned int bit = (flags >> bitpos) & 15;

	return bit ? (1 << (bit - 1)) : 0;
	}

	static void sc26xx_init_masks(struct uart_sc26xx_port *up,
	int line, unsigned int data)
	{
	up->dtr_mask[line] = sc26xx_flags2mask(data, 0);
	up->rts_mask[line] = sc26xx_flags2mask(data, 4);
	up->dsr_mask[line] = sc26xx_flags2mask(data, 8);
	up->cts_mask[line] = sc26xx_flags2mask(data, 12);
	up->dcd_mask[line] = sc26xx_flags2mask(data, 16);
	up->ri_mask[line] = sc26xx_flags2mask(data, 20);
	}

	static int sc26xx_probe(struct platform_device *dev)
	{
	struct resource *res;
	struct uart_sc26xx_port *up;
	unsigned int *sc26xx_data = dev->dev.platform_data;
	int err;

	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (!res)
	return -ENODEV;

	up = kzalloc(sizeof *up, GFP_KERNEL);
	if (unlikely(!up))
	return -ENOMEM;

	up->port[0].line = 0;
	up->port[0].ops = &sc26xx_ops;
	up->port[0].type = PORT_SC26XX;
	up->port[0].uartclk = (29491200 / 16); /* arbitrary */

	up->port[0].mapbase = res->start;
	up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40);
	up->port[0].iotype = UPIO_MEM;
	up->port[0].irq = platform_get_irq(dev, 0);

	up->port[0].dev = &dev->dev;

	sc26xx_init_masks(up, 0, sc26xx_data[0]);

	sc26xx_port = &up->port[0];

	up->port[1].line = 1;
	up->port[1].ops = &sc26xx_ops;
	up->port[1].type = PORT_SC26XX;
	up->port[1].uartclk = (29491200 / 16); /* arbitrary */

	up->port[1].mapbase = up->port[0].mapbase;
	up->port[1].membase = up->port[0].membase;
	up->port[1].iotype = UPIO_MEM;
	up->port[1].irq = up->port[0].irq;

	up->port[1].dev = &dev->dev;

	sc26xx_init_masks(up, 1, sc26xx_data[1]);

	err = uart_register_driver(&sc26xx_reg);
	if (err)
	goto out_free_port;

	sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor;

	err = uart_add_one_port(&sc26xx_reg, &up->port[0]);
	if (err)
	goto out_unregister_driver;

	err = uart_add_one_port(&sc26xx_reg, &up->port[1]);
	if (err)
	goto out_remove_port0;

	err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up);
	if (err)
	goto out_remove_ports;

	dev_set_drvdata(&dev->dev, up);
	return 0;

	out_remove_ports:
	uart_remove_one_port(&sc26xx_reg, &up->port[1]);
	out_remove_port0:
	uart_remove_one_port(&sc26xx_reg, &up->port[0]);

	out_unregister_driver:
	uart_unregister_driver(&sc26xx_reg);

	out_free_port:
	kfree(up);
	sc26xx_port = NULL;
	return err;
	}


	static int __exit sc26xx_driver_remove(struct platform_device *dev)
	{
	struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev);

	free_irq(up->port[0].irq, up);

	uart_remove_one_port(&sc26xx_reg, &up->port[0]);
	uart_remove_one_port(&sc26xx_reg, &up->port[1]);

	uart_unregister_driver(&sc26xx_reg);

	kfree(up);
	sc26xx_port = NULL;

	dev_set_drvdata(&dev->dev, NULL);
	return 0;
	}

	static struct platform_driver sc26xx_driver = {
	.probe = sc26xx_probe,
	.remove = sc26xx_driver_remove,
	.driver = {
	.name = "SC26xx",
	.owner = THIS_MODULE,
	},
	};

	module_platform_driver(sc26xx_driver);

	MODULE_AUTHOR("Thomas Bogendörfer");
	MODULE_DESCRIPTION("SC681/SC2692 serial driver");
	MODULE_VERSION("1.0");
	MODULE_LICENSE("GPL");
	MODULE_ALIAS("platform:SC26xx");