| .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later |
| .. c:namespace:: CEC |
| |
| .. _CEC_ADAP_LOG_ADDRS: |
| .. _CEC_ADAP_G_LOG_ADDRS: |
| .. _CEC_ADAP_S_LOG_ADDRS: |
| |
| **************************************************** |
| ioctls CEC_ADAP_G_LOG_ADDRS and CEC_ADAP_S_LOG_ADDRS |
| **************************************************** |
| |
| Name |
| ==== |
| |
| CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS - Get or set the logical addresses |
| |
| Synopsis |
| ======== |
| |
| .. c:macro:: CEC_ADAP_G_LOG_ADDRS |
| |
| ``int ioctl(int fd, CEC_ADAP_G_LOG_ADDRS, struct cec_log_addrs *argp)`` |
| |
| .. c:macro:: CEC_ADAP_S_LOG_ADDRS |
| |
| ``int ioctl(int fd, CEC_ADAP_S_LOG_ADDRS, struct cec_log_addrs *argp)`` |
| |
| Arguments |
| ========= |
| |
| ``fd`` |
| File descriptor returned by :c:func:`open()`. |
| |
| ``argp`` |
| Pointer to struct :c:type:`cec_log_addrs`. |
| |
| Description |
| =========== |
| |
| To query the current CEC logical addresses, applications call |
| :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a |
| struct :c:type:`cec_log_addrs` where the driver stores the logical addresses. |
| |
| To set new logical addresses, applications fill in |
| struct :c:type:`cec_log_addrs` and call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` |
| with a pointer to this struct. The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` |
| is only available if ``CEC_CAP_LOG_ADDRS`` is set (the ``ENOTTY`` error code is |
| returned otherwise). The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` |
| can only be called by a file descriptor in initiator mode (see :ref:`CEC_S_MODE`), if not |
| the ``EBUSY`` error code will be returned. |
| |
| To clear existing logical addresses set ``num_log_addrs`` to 0. All other fields |
| will be ignored in that case. The adapter will go to the unconfigured state and the |
| ``cec_version``, ``vendor_id`` and ``osd_name`` fields are all reset to their default |
| values (CEC version 2.0, no vendor ID and an empty OSD name). |
| |
| If the physical address is valid (see :ref:`ioctl CEC_ADAP_S_PHYS_ADDR <CEC_ADAP_S_PHYS_ADDR>`), |
| then this ioctl will block until all requested logical |
| addresses have been claimed. If the file descriptor is in non-blocking mode then it will |
| not wait for the logical addresses to be claimed, instead it just returns 0. |
| |
| A :ref:`CEC_EVENT_STATE_CHANGE <CEC-EVENT-STATE-CHANGE>` event is sent when the |
| logical addresses are claimed or cleared. |
| |
| Attempting to call :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` when |
| logical address types are already defined will return with error ``EBUSY``. |
| |
| .. c:type:: cec_log_addrs |
| |
| .. tabularcolumns:: |p{1.0cm}|p{8.0cm}|p{7.5cm}| |
| |
| .. cssclass:: longtable |
| |
| .. flat-table:: struct cec_log_addrs |
| :header-rows: 0 |
| :stub-columns: 0 |
| :widths: 1 1 16 |
| |
| * - __u8 |
| - ``log_addr[CEC_MAX_LOG_ADDRS]`` |
| - The actual logical addresses that were claimed. This is set by the |
| driver. If no logical address could be claimed, then it is set to |
| ``CEC_LOG_ADDR_INVALID``. If this adapter is Unregistered, then |
| ``log_addr[0]`` is set to 0xf and all others to |
| ``CEC_LOG_ADDR_INVALID``. |
| * - __u16 |
| - ``log_addr_mask`` |
| - The bitmask of all logical addresses this adapter has claimed. If |
| this adapter is Unregistered then ``log_addr_mask`` sets bit 15 |
| and clears all other bits. If this adapter is not configured at |
| all, then ``log_addr_mask`` is set to 0. Set by the driver. |
| * - __u8 |
| - ``cec_version`` |
| - The CEC version that this adapter shall use. See |
| :ref:`cec-versions`. Used to implement the |
| ``CEC_MSG_CEC_VERSION`` and ``CEC_MSG_REPORT_FEATURES`` messages. |
| Note that :ref:`CEC_OP_CEC_VERSION_1_3A <CEC-OP-CEC-VERSION-1-3A>` is not allowed by the CEC |
| framework. |
| * - __u8 |
| - ``num_log_addrs`` |
| - Number of logical addresses to set up. Must be ≤ |
| ``available_log_addrs`` as returned by |
| :ref:`CEC_ADAP_G_CAPS`. All arrays in |
| this structure are only filled up to index |
| ``available_log_addrs``-1. The remaining array elements will be |
| ignored. Note that the CEC 2.0 standard allows for a maximum of 2 |
| logical addresses, although some hardware has support for more. |
| ``CEC_MAX_LOG_ADDRS`` is 4. The driver will return the actual |
| number of logical addresses it could claim, which may be less than |
| what was requested. If this field is set to 0, then the CEC |
| adapter shall clear all claimed logical addresses and all other |
| fields will be ignored. |
| * - __u32 |
| - ``vendor_id`` |
| - The vendor ID is a 24-bit number that identifies the specific |
| vendor or entity. Based on this ID vendor specific commands may be |
| defined. If you do not want a vendor ID then set it to |
| ``CEC_VENDOR_ID_NONE``. |
| * - __u32 |
| - ``flags`` |
| - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. |
| * - char |
| - ``osd_name[15]`` |
| - The On-Screen Display name as is returned by the |
| ``CEC_MSG_SET_OSD_NAME`` message. |
| * - __u8 |
| - ``primary_device_type[CEC_MAX_LOG_ADDRS]`` |
| - Primary device type for each logical address. See |
| :ref:`cec-prim-dev-types` for possible types. |
| * - __u8 |
| - ``log_addr_type[CEC_MAX_LOG_ADDRS]`` |
| - Logical address types. See :ref:`cec-log-addr-types` for |
| possible types. The driver will update this with the actual |
| logical address type that it claimed (e.g. it may have to fallback |
| to :ref:`CEC_LOG_ADDR_TYPE_UNREGISTERED <CEC-LOG-ADDR-TYPE-UNREGISTERED>`). |
| * - __u8 |
| - ``all_device_types[CEC_MAX_LOG_ADDRS]`` |
| - CEC 2.0 specific: the bit mask of all device types. See |
| :ref:`cec-all-dev-types-flags`. It is used in the CEC 2.0 |
| ``CEC_MSG_REPORT_FEATURES`` message. For CEC 1.4 you can either leave |
| this field to 0, or fill it in according to the CEC 2.0 guidelines to |
| give the CEC framework more information about the device type, even |
| though the framework won't use it directly in the CEC message. |
| * - __u8 |
| - ``features[CEC_MAX_LOG_ADDRS][12]`` |
| - Features for each logical address. It is used in the CEC 2.0 |
| ``CEC_MSG_REPORT_FEATURES`` message. The 12 bytes include both the |
| RC Profile and the Device Features. For CEC 1.4 you can either leave |
| this field to all 0, or fill it in according to the CEC 2.0 guidelines to |
| give the CEC framework more information about the device type, even |
| though the framework won't use it directly in the CEC message. |
| |
| .. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| |
| |
| .. _cec-log-addrs-flags: |
| |
| .. flat-table:: Flags for struct cec_log_addrs |
| :header-rows: 0 |
| :stub-columns: 0 |
| :widths: 3 1 4 |
| |
| * .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: |
| |
| - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` |
| - 1 |
| - By default if no logical address of the requested type can be claimed, then |
| it will go back to the unconfigured state. If this flag is set, then it will |
| fallback to the Unregistered logical address. Note that if the Unregistered |
| logical address was explicitly requested, then this flag has no effect. |
| * .. _`CEC-LOG-ADDRS-FL-ALLOW-RC-PASSTHRU`: |
| |
| - ``CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU`` |
| - 2 |
| - By default the ``CEC_MSG_USER_CONTROL_PRESSED`` and ``CEC_MSG_USER_CONTROL_RELEASED`` |
| messages are only passed on to the follower(s), if any. If this flag is set, |
| then these messages are also passed on to the remote control input subsystem |
| and will appear as keystrokes. This features needs to be enabled explicitly. |
| If CEC is used to enter e.g. passwords, then you may not want to enable this |
| to avoid trivial snooping of the keystrokes. |
| * .. _`CEC-LOG-ADDRS-FL-CDC-ONLY`: |
| |
| - ``CEC_LOG_ADDRS_FL_CDC_ONLY`` |
| - 4 |
| - If this flag is set, then the device is CDC-Only. CDC-Only CEC devices |
| are CEC devices that can only handle CDC messages. |
| |
| All other messages are ignored. |
| |
| .. tabularcolumns:: |p{7.8cm}|p{1.0cm}|p{8.7cm}| |
| |
| .. _cec-versions: |
| |
| .. flat-table:: CEC Versions |
| :header-rows: 0 |
| :stub-columns: 0 |
| :widths: 3 1 4 |
| |
| * .. _`CEC-OP-CEC-VERSION-1-3A`: |
| |
| - ``CEC_OP_CEC_VERSION_1_3A`` |
| - 4 |
| - CEC version according to the HDMI 1.3a standard. |
| * .. _`CEC-OP-CEC-VERSION-1-4B`: |
| |
| - ``CEC_OP_CEC_VERSION_1_4B`` |
| - 5 |
| - CEC version according to the HDMI 1.4b standard. |
| * .. _`CEC-OP-CEC-VERSION-2-0`: |
| |
| - ``CEC_OP_CEC_VERSION_2_0`` |
| - 6 |
| - CEC version according to the HDMI 2.0 standard. |
| |
| .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| |
| |
| .. _cec-prim-dev-types: |
| |
| .. flat-table:: CEC Primary Device Types |
| :header-rows: 0 |
| :stub-columns: 0 |
| :widths: 3 1 4 |
| |
| * .. _`CEC-OP-PRIM-DEVTYPE-TV`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_TV`` |
| - 0 |
| - Use for a TV. |
| * .. _`CEC-OP-PRIM-DEVTYPE-RECORD`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_RECORD`` |
| - 1 |
| - Use for a recording device. |
| * .. _`CEC-OP-PRIM-DEVTYPE-TUNER`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_TUNER`` |
| - 3 |
| - Use for a device with a tuner. |
| * .. _`CEC-OP-PRIM-DEVTYPE-PLAYBACK`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_PLAYBACK`` |
| - 4 |
| - Use for a playback device. |
| * .. _`CEC-OP-PRIM-DEVTYPE-AUDIOSYSTEM`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM`` |
| - 5 |
| - Use for an audio system (e.g. an audio/video receiver). |
| * .. _`CEC-OP-PRIM-DEVTYPE-SWITCH`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_SWITCH`` |
| - 6 |
| - Use for a CEC switch. |
| * .. _`CEC-OP-PRIM-DEVTYPE-VIDEOPROC`: |
| |
| - ``CEC_OP_PRIM_DEVTYPE_VIDEOPROC`` |
| - 7 |
| - Use for a video processor device. |
| |
| .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| |
| |
| .. _cec-log-addr-types: |
| |
| .. flat-table:: CEC Logical Address Types |
| :header-rows: 0 |
| :stub-columns: 0 |
| :widths: 3 1 16 |
| |
| * .. _`CEC-LOG-ADDR-TYPE-TV`: |
| |
| - ``CEC_LOG_ADDR_TYPE_TV`` |
| - 0 |
| - Use for a TV. |
| * .. _`CEC-LOG-ADDR-TYPE-RECORD`: |
| |
| - ``CEC_LOG_ADDR_TYPE_RECORD`` |
| - 1 |
| - Use for a recording device. |
| * .. _`CEC-LOG-ADDR-TYPE-TUNER`: |
| |
| - ``CEC_LOG_ADDR_TYPE_TUNER`` |
| - 2 |
| - Use for a tuner device. |
| * .. _`CEC-LOG-ADDR-TYPE-PLAYBACK`: |
| |
| - ``CEC_LOG_ADDR_TYPE_PLAYBACK`` |
| - 3 |
| - Use for a playback device. |
| * .. _`CEC-LOG-ADDR-TYPE-AUDIOSYSTEM`: |
| |
| - ``CEC_LOG_ADDR_TYPE_AUDIOSYSTEM`` |
| - 4 |
| - Use for an audio system device. |
| * .. _`CEC-LOG-ADDR-TYPE-SPECIFIC`: |
| |
| - ``CEC_LOG_ADDR_TYPE_SPECIFIC`` |
| - 5 |
| - Use for a second TV or for a video processor device. |
| * .. _`CEC-LOG-ADDR-TYPE-UNREGISTERED`: |
| |
| - ``CEC_LOG_ADDR_TYPE_UNREGISTERED`` |
| - 6 |
| - Use this if you just want to remain unregistered. Used for pure |
| CEC switches or CDC-only devices (CDC: Capability Discovery and |
| Control). |
| |
| |
| .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| |
| |
| .. _cec-all-dev-types-flags: |
| |
| .. flat-table:: CEC All Device Types Flags |
| :header-rows: 0 |
| :stub-columns: 0 |
| :widths: 3 1 4 |
| |
| * .. _`CEC-OP-ALL-DEVTYPE-TV`: |
| |
| - ``CEC_OP_ALL_DEVTYPE_TV`` |
| - 0x80 |
| - This supports the TV type. |
| * .. _`CEC-OP-ALL-DEVTYPE-RECORD`: |
| |
| - ``CEC_OP_ALL_DEVTYPE_RECORD`` |
| - 0x40 |
| - This supports the Recording type. |
| * .. _`CEC-OP-ALL-DEVTYPE-TUNER`: |
| |
| - ``CEC_OP_ALL_DEVTYPE_TUNER`` |
| - 0x20 |
| - This supports the Tuner type. |
| * .. _`CEC-OP-ALL-DEVTYPE-PLAYBACK`: |
| |
| - ``CEC_OP_ALL_DEVTYPE_PLAYBACK`` |
| - 0x10 |
| - This supports the Playback type. |
| * .. _`CEC-OP-ALL-DEVTYPE-AUDIOSYSTEM`: |
| |
| - ``CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM`` |
| - 0x08 |
| - This supports the Audio System type. |
| * .. _`CEC-OP-ALL-DEVTYPE-SWITCH`: |
| |
| - ``CEC_OP_ALL_DEVTYPE_SWITCH`` |
| - 0x04 |
| - This supports the CEC Switch or Video Processing type. |
| |
| |
| Return Value |
| ============ |
| |
| On success 0 is returned, on error -1 and the ``errno`` variable is set |
| appropriately. The generic error codes are described at the |
| :ref:`Generic Error Codes <gen-errors>` chapter. |
| |
| The :ref:`ioctl CEC_ADAP_S_LOG_ADDRS <CEC_ADAP_S_LOG_ADDRS>` can return the following |
| error codes: |
| |
| ENOTTY |
| The ``CEC_CAP_LOG_ADDRS`` capability wasn't set, so this ioctl is not supported. |
| |
| EBUSY |
| The CEC adapter is currently configuring itself, or it is already configured and |
| ``num_log_addrs`` is non-zero, or another filehandle is in exclusive follower or |
| initiator mode, or the filehandle is in mode ``CEC_MODE_NO_INITIATOR``. |
| |
| EINVAL |
| The contents of struct :c:type:`cec_log_addrs` is invalid. |
