| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com) |
| */ |
| /dts-v1/; |
| |
| /include/ "skeleton_hs.dtsi" |
| |
| / { |
| model = "snps,zebu_hs"; |
| compatible = "snps,zebu_hs"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&core_intc>; |
| |
| memory { |
| device_type = "memory"; |
| /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ |
| reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ |
| 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ |
| }; |
| |
| chosen { |
| bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; |
| }; |
| |
| aliases { |
| serial0 = &uart0; |
| }; |
| |
| fpga { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* only perip space at end of low mem accessible |
| bus addr, parent bus addr, size */ |
| ranges = <0x80000000 0x0 0x80000000 0x80000000>; |
| |
| core_clk: core_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <50000000>; |
| }; |
| |
| core_intc: interrupt-controller { |
| compatible = "snps,archs-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| uart0: serial@f0000000 { |
| compatible = "ns16550a"; |
| reg = <0xf0000000 0x2000>; |
| interrupts = <24>; |
| clock-frequency = <50000000>; |
| baud = <115200>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| no-loopback-test = <1>; |
| }; |
| |
| arcpct0: pct { |
| compatible = "snps,archs-pct"; |
| #interrupt-cells = <1>; |
| interrupts = <20>; |
| }; |
| |
| virtio0: virtio@f0100000 { |
| compatible = "virtio,mmio"; |
| reg = <0xf0100000 0x2000>; |
| interrupts = <31>; |
| }; |
| |
| virtio1: virtio@f0102000 { |
| compatible = "virtio,mmio"; |
| reg = <0xf0102000 0x2000>; |
| interrupts = <32>; |
| }; |
| |
| virtio2: virtio@f0104000 { |
| compatible = "virtio,mmio"; |
| reg = <0xf0104000 0x2000>; |
| interrupts = <33>; |
| }; |
| |
| virtio3: virtio@f0106000 { |
| compatible = "virtio,mmio"; |
| reg = <0xf0106000 0x2000>; |
| interrupts = <34>; |
| }; |
| |
| virtio4: virtio@f0108000 { |
| compatible = "virtio,mmio"; |
| reg = <0xf0108000 0x2000>; |
| interrupts = <35>; |
| }; |
| }; |
| }; |