| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032) |
| * |
| * Copyright (C) 2018 Renesas Electronics Europe Limited |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/r9a06g032-sysctrl.h> |
| |
| / { |
| compatible = "renesas,r9a06g032"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0>; |
| clocks = <&sysctrl R9A06G032_CLK_A7MP>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <1>; |
| clocks = <&sysctrl R9A06G032_CLK_A7MP>; |
| enable-method = "renesas,r9a06g032-smp"; |
| cpu-release-addr = <0 0x4000c204>; |
| }; |
| }; |
| |
| ext_jtag_clk: extjtagclk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| ext_mclk: extmclk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <40000000>; |
| }; |
| |
| ext_rgmii_ref: extrgmiiref { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| ext_rtc_clk: extrtcclk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| sysctrl: system-controller@4000c000 { |
| compatible = "renesas,r9a06g032-sysctrl"; |
| reg = <0x4000c000 0x1000>; |
| status = "okay"; |
| #clock-cells = <1>; |
| |
| clocks = <&ext_mclk>, <&ext_rtc_clk>, |
| <&ext_jtag_clk>, <&ext_rgmii_ref>; |
| clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; |
| }; |
| |
| uart0: serial@40060000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; |
| reg = <0x40060000 0x400>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@40061000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; |
| reg = <0x40061000 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@40062000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; |
| reg = <0x40062000 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@50000000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50000000 0x400>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@50001000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50001000 0x400>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@50002000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50002000 0x400>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart6: serial@50003000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50003000 0x400>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart7: serial@50004000 { |
| compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; |
| reg = <0x50004000 0x400>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; |
| clock-names = "baudclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| pinctrl: pinctrl@40067000 { |
| compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; |
| reg = <0x40067000 0x1000>, <0x51000000 0x480>; |
| clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>; |
| clock-names = "bus"; |
| status = "okay"; |
| }; |
| |
| gic: interrupt-controller@44101000 { |
| compatible = "arm,gic-400", "arm,cortex-a7-gic"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0x44101000 0x1000>, /* Distributer */ |
| <0x44102000 0x2000>, /* CPU interface */ |
| <0x44104000 0x2000>, /* Virt interface control */ |
| <0x44106000 0x2000>; /* Virt CPU interface */ |
| interrupts = |
| <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,cortex-a7-timer", |
| "arm,armv7-timer"; |
| interrupt-parent = <&gic>; |
| arm,cpu-registers-not-fw-configured; |
| always-on; |
| interrupts = |
| <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |