| /* SPDX-License-Identifier: GPL-2.0 */ |
| /*---------------------------------------------------------------------------+ |
| | fpu_emu.h | |
| | | |
| | Copyright (C) 1992,1993,1994,1997 | |
| | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, | |
| | Australia. E-mail billm@suburbia.net | |
| | | |
| +---------------------------------------------------------------------------*/ |
| |
| #ifndef _FPU_EMU_H_ |
| #define _FPU_EMU_H_ |
| |
| /* |
| * Define PECULIAR_486 to get a closer approximation to 80486 behaviour, |
| * rather than behaviour which appears to be cleaner. |
| * This is a matter of opinion: for all I know, the 80486 may simply |
| * be complying with the IEEE spec. Maybe one day I'll get to see the |
| * spec... |
| */ |
| #define PECULIAR_486 |
| |
| #ifdef __ASSEMBLY__ |
| #include "fpu_asm.h" |
| #define Const(x) $##x |
| #else |
| #define Const(x) x |
| #endif |
| |
| #define EXP_BIAS Const(0) |
| #define EXP_OVER Const(0x4000) /* smallest invalid large exponent */ |
| #define EXP_UNDER Const(-0x3fff) /* largest invalid small exponent */ |
| #define EXP_WAY_UNDER Const(-0x6000) /* Below the smallest denormal, but |
| still a 16 bit nr. */ |
| #define EXP_Infinity EXP_OVER |
| #define EXP_NaN EXP_OVER |
| |
| #define EXTENDED_Ebias Const(0x3fff) |
| #define EXTENDED_Emin (-0x3ffe) /* smallest valid exponent */ |
| |
| #define SIGN_POS Const(0) |
| #define SIGN_NEG Const(0x80) |
| |
| #define SIGN_Positive Const(0) |
| #define SIGN_Negative Const(0x8000) |
| |
| /* Keep the order TAG_Valid, TAG_Zero, TW_Denormal */ |
| /* The following fold to 2 (Special) in the Tag Word */ |
| #define TW_Denormal Const(4) /* De-normal */ |
| #define TW_Infinity Const(5) /* + or - infinity */ |
| #define TW_NaN Const(6) /* Not a Number */ |
| #define TW_Unsupported Const(7) /* Not supported by an 80486 */ |
| |
| #define TAG_Valid Const(0) /* valid */ |
| #define TAG_Zero Const(1) /* zero */ |
| #define TAG_Special Const(2) /* De-normal, + or - infinity, |
| or Not a Number */ |
| #define TAG_Empty Const(3) /* empty */ |
| #define TAG_Error Const(0x80) /* probably need to abort */ |
| |
| #define LOADED_DATA Const(10101) /* Special st() number to identify |
| loaded data (not on stack). */ |
| |
| /* A few flags (must be >= 0x10). */ |
| #define REV 0x10 |
| #define DEST_RM 0x20 |
| #define LOADED 0x40 |
| |
| #define FPU_Exception Const(0x80000000) /* Added to tag returns. */ |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include "fpu_system.h" |
| |
| #include <uapi/asm/sigcontext.h> /* for struct _fpstate */ |
| #include <asm/math_emu.h> |
| #include <linux/linkage.h> |
| |
| /* |
| #define RE_ENTRANT_CHECKING |
| */ |
| |
| #ifdef RE_ENTRANT_CHECKING |
| extern u_char emulating; |
| # define RE_ENTRANT_CHECK_OFF emulating = 0 |
| # define RE_ENTRANT_CHECK_ON emulating = 1 |
| #else |
| # define RE_ENTRANT_CHECK_OFF |
| # define RE_ENTRANT_CHECK_ON |
| #endif /* RE_ENTRANT_CHECKING */ |
| |
| #define FWAIT_OPCODE 0x9b |
| #define OP_SIZE_PREFIX 0x66 |
| #define ADDR_SIZE_PREFIX 0x67 |
| #define PREFIX_CS 0x2e |
| #define PREFIX_DS 0x3e |
| #define PREFIX_ES 0x26 |
| #define PREFIX_SS 0x36 |
| #define PREFIX_FS 0x64 |
| #define PREFIX_GS 0x65 |
| #define PREFIX_REPE 0xf3 |
| #define PREFIX_REPNE 0xf2 |
| #define PREFIX_LOCK 0xf0 |
| #define PREFIX_CS_ 1 |
| #define PREFIX_DS_ 2 |
| #define PREFIX_ES_ 3 |
| #define PREFIX_FS_ 4 |
| #define PREFIX_GS_ 5 |
| #define PREFIX_SS_ 6 |
| #define PREFIX_DEFAULT 7 |
| |
| struct address { |
| unsigned int offset; |
| unsigned int selector:16; |
| unsigned int opcode:11; |
| unsigned int empty:5; |
| }; |
| struct fpu__reg { |
| unsigned sigl; |
| unsigned sigh; |
| short exp; |
| }; |
| |
| typedef void (*FUNC) (void); |
| typedef struct fpu__reg FPU_REG; |
| typedef void (*FUNC_ST0) (FPU_REG *st0_ptr, u_char st0_tag); |
| typedef struct { |
| u_char address_size, operand_size, segment; |
| } overrides; |
| /* This structure is 32 bits: */ |
| typedef struct { |
| overrides override; |
| u_char default_mode; |
| } fpu_addr_modes; |
| /* PROTECTED has a restricted meaning in the emulator; it is used |
| to signal that the emulator needs to do special things to ensure |
| that protection is respected in a segmented model. */ |
| #define PROTECTED 4 |
| #define SIXTEEN 1 /* We rely upon this being 1 (true) */ |
| #define VM86 SIXTEEN |
| #define PM16 (SIXTEEN | PROTECTED) |
| #define SEG32 PROTECTED |
| extern u_char const data_sizes_16[32]; |
| |
| #define register_base ((u_char *) registers ) |
| #define fpu_register(x) ( * ((FPU_REG *)( register_base + 10 * (x & 7) )) ) |
| #define st(x) ( * ((FPU_REG *)( register_base + 10 * ((top+x) & 7) )) ) |
| |
| #define STACK_OVERFLOW (FPU_stackoverflow(&st_new_ptr)) |
| #define NOT_EMPTY(i) (!FPU_empty_i(i)) |
| |
| #define NOT_EMPTY_ST0 (st0_tag ^ TAG_Empty) |
| |
| #define poppop() { FPU_pop(); FPU_pop(); } |
| |
| /* push() does not affect the tags */ |
| #define push() { top--; } |
| |
| #define signbyte(a) (((u_char *)(a))[9]) |
| #define getsign(a) (signbyte(a) & 0x80) |
| #define setsign(a,b) { if ((b) != 0) signbyte(a) |= 0x80; else signbyte(a) &= 0x7f; } |
| #define copysign(a,b) { if (getsign(a)) signbyte(b) |= 0x80; \ |
| else signbyte(b) &= 0x7f; } |
| #define changesign(a) { signbyte(a) ^= 0x80; } |
| #define setpositive(a) { signbyte(a) &= 0x7f; } |
| #define setnegative(a) { signbyte(a) |= 0x80; } |
| #define signpositive(a) ( (signbyte(a) & 0x80) == 0 ) |
| #define signnegative(a) (signbyte(a) & 0x80) |
| |
| static inline void reg_copy(FPU_REG const *x, FPU_REG *y) |
| { |
| *(short *)&(y->exp) = *(const short *)&(x->exp); |
| *(long long *)&(y->sigl) = *(const long long *)&(x->sigl); |
| } |
| |
| #define exponent(x) (((*(short *)&((x)->exp)) & 0x7fff) - EXTENDED_Ebias) |
| #define setexponentpos(x,y) { (*(short *)&((x)->exp)) = \ |
| ((y) + EXTENDED_Ebias) & 0x7fff; } |
| #define exponent16(x) (*(short *)&((x)->exp)) |
| #define setexponent16(x,y) { (*(short *)&((x)->exp)) = (u16)(y); } |
| #define addexponent(x,y) { (*(short *)&((x)->exp)) += (y); } |
| #define stdexp(x) { (*(short *)&((x)->exp)) += EXTENDED_Ebias; } |
| |
| #define isdenormal(ptr) (exponent(ptr) == EXP_BIAS+EXP_UNDER) |
| |
| #define significand(x) ( ((unsigned long long *)&((x)->sigl))[0] ) |
| |
| /*----- Prototypes for functions written in assembler -----*/ |
| /* extern void reg_move(FPU_REG *a, FPU_REG *b); */ |
| |
| asmlinkage int FPU_normalize(FPU_REG *x); |
| asmlinkage int FPU_normalize_nuo(FPU_REG *x); |
| asmlinkage int FPU_u_sub(FPU_REG const *arg1, FPU_REG const *arg2, |
| FPU_REG * answ, unsigned int control_w, u_char sign, |
| int expa, int expb); |
| asmlinkage int FPU_u_mul(FPU_REG const *arg1, FPU_REG const *arg2, |
| FPU_REG * answ, unsigned int control_w, u_char sign, |
| int expon); |
| asmlinkage int FPU_u_div(FPU_REG const *arg1, FPU_REG const *arg2, |
| FPU_REG * answ, unsigned int control_w, u_char sign); |
| asmlinkage int FPU_u_add(FPU_REG const *arg1, FPU_REG const *arg2, |
| FPU_REG * answ, unsigned int control_w, u_char sign, |
| int expa, int expb); |
| asmlinkage int wm_sqrt(FPU_REG *n, int dummy1, int dummy2, |
| unsigned int control_w, u_char sign); |
| asmlinkage unsigned FPU_shrx(void *l, unsigned x); |
| asmlinkage unsigned FPU_shrxs(void *v, unsigned x); |
| asmlinkage unsigned long FPU_div_small(unsigned long long *x, unsigned long y); |
| asmlinkage int FPU_round(FPU_REG *arg, unsigned int extent, int dummy, |
| unsigned int control_w, u_char sign); |
| |
| #ifndef MAKING_PROTO |
| #include "fpu_proto.h" |
| #endif |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* _FPU_EMU_H_ */ |