| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015 Endless Mobile, Inc. |
| * Author: Carlo Caione <carlo@endlessm.com> |
| * |
| * Copyright (c) 2018 Baylibre, SAS. |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| /* |
| * In the most basic form, a Meson PLL is composed as follows: |
| * |
| * PLL |
| * +--------------------------------+ |
| * | | |
| * | +--+ | |
| * in >>-----[ /N ]--->| | +-----+ | |
| * | | |------| DCO |---->> out |
| * | +--------->| | +--v--+ | |
| * | | +--+ | | |
| * | | | | |
| * | +--[ *(M + (F/Fmax) ]<--+ | |
| * | | |
| * +--------------------------------+ |
| * |
| * out = in * (m + frac / frac_max) / n |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/math64.h> |
| #include <linux/module.h> |
| #include <linux/rational.h> |
| |
| #include "clk-regmap.h" |
| #include "clk-pll.h" |
| |
| static inline struct meson_clk_pll_data * |
| meson_clk_pll_data(struct clk_regmap *clk) |
| { |
| return (struct meson_clk_pll_data *)clk->data; |
| } |
| |
| static int __pll_round_closest_mult(struct meson_clk_pll_data *pll) |
| { |
| if ((pll->flags & CLK_MESON_PLL_ROUND_CLOSEST) && |
| !MESON_PARM_APPLICABLE(&pll->frac)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static unsigned long __pll_params_to_rate(unsigned long parent_rate, |
| unsigned int m, unsigned int n, |
| unsigned int frac, |
| struct meson_clk_pll_data *pll) |
| { |
| u64 rate = (u64)parent_rate * m; |
| |
| if (frac && MESON_PARM_APPLICABLE(&pll->frac)) { |
| u64 frac_rate = (u64)parent_rate * frac; |
| |
| rate += DIV_ROUND_UP_ULL(frac_rate, |
| (1 << pll->frac.width)); |
| } |
| |
| return DIV_ROUND_UP_ULL(rate, n); |
| } |
| |
| static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| unsigned int m, n, frac; |
| |
| n = meson_parm_read(clk->map, &pll->n); |
| |
| /* |
| * On some HW, N is set to zero on init. This value is invalid as |
| * it would result in a division by zero. The rate can't be |
| * calculated in this case |
| */ |
| if (n == 0) |
| return 0; |
| |
| m = meson_parm_read(clk->map, &pll->m); |
| |
| frac = MESON_PARM_APPLICABLE(&pll->frac) ? |
| meson_parm_read(clk->map, &pll->frac) : |
| 0; |
| |
| return __pll_params_to_rate(parent_rate, m, n, frac, pll); |
| } |
| |
| static unsigned int __pll_params_with_frac(unsigned long rate, |
| unsigned long parent_rate, |
| unsigned int m, |
| unsigned int n, |
| struct meson_clk_pll_data *pll) |
| { |
| unsigned int frac_max = (1 << pll->frac.width); |
| u64 val = (u64)rate * n; |
| |
| /* Bail out if we are already over the requested rate */ |
| if (rate < parent_rate * m / n) |
| return 0; |
| |
| if (pll->flags & CLK_MESON_PLL_ROUND_CLOSEST) |
| val = DIV_ROUND_CLOSEST_ULL(val * frac_max, parent_rate); |
| else |
| val = div_u64(val * frac_max, parent_rate); |
| |
| val -= m * frac_max; |
| |
| return min((unsigned int)val, (frac_max - 1)); |
| } |
| |
| static bool meson_clk_pll_is_better(unsigned long rate, |
| unsigned long best, |
| unsigned long now, |
| struct meson_clk_pll_data *pll) |
| { |
| if (__pll_round_closest_mult(pll)) { |
| /* Round Closest */ |
| if (abs(now - rate) < abs(best - rate)) |
| return true; |
| } else { |
| /* Round down */ |
| if (now <= rate && best < now) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int meson_clk_get_pll_table_index(unsigned int index, |
| unsigned int *m, |
| unsigned int *n, |
| struct meson_clk_pll_data *pll) |
| { |
| if (!pll->table[index].n) |
| return -EINVAL; |
| |
| *m = pll->table[index].m; |
| *n = pll->table[index].n; |
| |
| return 0; |
| } |
| |
| static unsigned int meson_clk_get_pll_range_m(unsigned long rate, |
| unsigned long parent_rate, |
| unsigned int n, |
| struct meson_clk_pll_data *pll) |
| { |
| u64 val = (u64)rate * n; |
| |
| if (__pll_round_closest_mult(pll)) |
| return DIV_ROUND_CLOSEST_ULL(val, parent_rate); |
| |
| return div_u64(val, parent_rate); |
| } |
| |
| static int meson_clk_get_pll_range_index(unsigned long rate, |
| unsigned long parent_rate, |
| unsigned int index, |
| unsigned int *m, |
| unsigned int *n, |
| struct meson_clk_pll_data *pll) |
| { |
| *n = index + 1; |
| |
| /* Check the predivider range */ |
| if (*n >= (1 << pll->n.width)) |
| return -EINVAL; |
| |
| if (*n == 1) { |
| /* Get the boundaries out the way */ |
| if (rate <= pll->range->min * parent_rate) { |
| *m = pll->range->min; |
| return -ENODATA; |
| } else if (rate >= pll->range->max * parent_rate) { |
| *m = pll->range->max; |
| return -ENODATA; |
| } |
| } |
| |
| *m = meson_clk_get_pll_range_m(rate, parent_rate, *n, pll); |
| |
| /* the pre-divider gives a multiplier too big - stop */ |
| if (*m >= (1 << pll->m.width)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int meson_clk_get_pll_get_index(unsigned long rate, |
| unsigned long parent_rate, |
| unsigned int index, |
| unsigned int *m, |
| unsigned int *n, |
| struct meson_clk_pll_data *pll) |
| { |
| if (pll->range) |
| return meson_clk_get_pll_range_index(rate, parent_rate, |
| index, m, n, pll); |
| else if (pll->table) |
| return meson_clk_get_pll_table_index(index, m, n, pll); |
| |
| return -EINVAL; |
| } |
| |
| static int meson_clk_get_pll_settings(unsigned long rate, |
| unsigned long parent_rate, |
| unsigned int *best_m, |
| unsigned int *best_n, |
| struct meson_clk_pll_data *pll) |
| { |
| unsigned long best = 0, now = 0; |
| unsigned int i, m, n; |
| int ret; |
| |
| for (i = 0, ret = 0; !ret; i++) { |
| ret = meson_clk_get_pll_get_index(rate, parent_rate, |
| i, &m, &n, pll); |
| if (ret == -EINVAL) |
| break; |
| |
| now = __pll_params_to_rate(parent_rate, m, n, 0, pll); |
| if (meson_clk_pll_is_better(rate, best, now, pll)) { |
| best = now; |
| *best_m = m; |
| *best_n = n; |
| |
| if (now == rate) |
| break; |
| } |
| } |
| |
| return best ? 0 : -EINVAL; |
| } |
| |
| static long meson_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| unsigned int m, n, frac; |
| unsigned long round; |
| int ret; |
| |
| ret = meson_clk_get_pll_settings(rate, *parent_rate, &m, &n, pll); |
| if (ret) |
| return meson_clk_pll_recalc_rate(hw, *parent_rate); |
| |
| round = __pll_params_to_rate(*parent_rate, m, n, 0, pll); |
| |
| if (!MESON_PARM_APPLICABLE(&pll->frac) || rate == round) |
| return round; |
| |
| /* |
| * The rate provided by the setting is not an exact match, let's |
| * try to improve the result using the fractional parameter |
| */ |
| frac = __pll_params_with_frac(rate, *parent_rate, m, n, pll); |
| |
| return __pll_params_to_rate(*parent_rate, m, n, frac, pll); |
| } |
| |
| static int meson_clk_pll_wait_lock(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| int delay = 24000000; |
| |
| do { |
| /* Is the clock locked now ? */ |
| if (meson_parm_read(clk->map, &pll->l)) |
| return 0; |
| |
| delay--; |
| } while (delay > 0); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int meson_clk_pll_init(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| |
| if (pll->init_count) { |
| meson_parm_write(clk->map, &pll->rst, 1); |
| regmap_multi_reg_write(clk->map, pll->init_regs, |
| pll->init_count); |
| meson_parm_write(clk->map, &pll->rst, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int meson_clk_pll_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| |
| if (meson_parm_read(clk->map, &pll->rst) || |
| !meson_parm_read(clk->map, &pll->en) || |
| !meson_parm_read(clk->map, &pll->l)) |
| return 0; |
| |
| return 1; |
| } |
| |
| static int meson_clk_pcie_pll_enable(struct clk_hw *hw) |
| { |
| meson_clk_pll_init(hw); |
| |
| if (meson_clk_pll_wait_lock(hw)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int meson_clk_pll_enable(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| |
| /* do nothing if the PLL is already enabled */ |
| if (clk_hw_is_enabled(hw)) |
| return 0; |
| |
| /* Make sure the pll is in reset */ |
| meson_parm_write(clk->map, &pll->rst, 1); |
| |
| /* Enable the pll */ |
| meson_parm_write(clk->map, &pll->en, 1); |
| |
| /* Take the pll out reset */ |
| meson_parm_write(clk->map, &pll->rst, 0); |
| |
| if (meson_clk_pll_wait_lock(hw)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static void meson_clk_pll_disable(struct clk_hw *hw) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| |
| /* Put the pll is in reset */ |
| meson_parm_write(clk->map, &pll->rst, 1); |
| |
| /* Disable the pll */ |
| meson_parm_write(clk->map, &pll->en, 0); |
| } |
| |
| static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_regmap *clk = to_clk_regmap(hw); |
| struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); |
| unsigned int enabled, m, n, frac = 0, ret; |
| unsigned long old_rate; |
| |
| if (parent_rate == 0 || rate == 0) |
| return -EINVAL; |
| |
| old_rate = rate; |
| |
| ret = meson_clk_get_pll_settings(rate, parent_rate, &m, &n, pll); |
| if (ret) |
| return ret; |
| |
| enabled = meson_parm_read(clk->map, &pll->en); |
| if (enabled) |
| meson_clk_pll_disable(hw); |
| |
| meson_parm_write(clk->map, &pll->n, n); |
| meson_parm_write(clk->map, &pll->m, m); |
| |
| if (MESON_PARM_APPLICABLE(&pll->frac)) { |
| frac = __pll_params_with_frac(rate, parent_rate, m, n, pll); |
| meson_parm_write(clk->map, &pll->frac, frac); |
| } |
| |
| /* If the pll is stopped, bail out now */ |
| if (!enabled) |
| return 0; |
| |
| if (meson_clk_pll_enable(hw)) { |
| pr_warn("%s: pll did not lock, trying to restore old rate %lu\n", |
| __func__, old_rate); |
| /* |
| * FIXME: Do we really need/want this HACK ? |
| * It looks unsafe. what happens if the clock gets into a |
| * broken state and we can't lock back on the old_rate ? Looks |
| * like an infinite recursion is possible |
| */ |
| meson_clk_pll_set_rate(hw, old_rate, parent_rate); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * The Meson G12A PCIE PLL is fined tuned to deliver a very precise |
| * 100MHz reference clock for the PCIe Analog PHY, and thus requires |
| * a strict register sequence to enable the PLL. |
| * To simplify, re-use the _init() op to enable the PLL and keep |
| * the other ops except set_rate since the rate is fixed. |
| */ |
| const struct clk_ops meson_clk_pcie_pll_ops = { |
| .recalc_rate = meson_clk_pll_recalc_rate, |
| .round_rate = meson_clk_pll_round_rate, |
| .is_enabled = meson_clk_pll_is_enabled, |
| .enable = meson_clk_pcie_pll_enable, |
| .disable = meson_clk_pll_disable |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_pcie_pll_ops); |
| |
| const struct clk_ops meson_clk_pll_ops = { |
| .init = meson_clk_pll_init, |
| .recalc_rate = meson_clk_pll_recalc_rate, |
| .round_rate = meson_clk_pll_round_rate, |
| .set_rate = meson_clk_pll_set_rate, |
| .is_enabled = meson_clk_pll_is_enabled, |
| .enable = meson_clk_pll_enable, |
| .disable = meson_clk_pll_disable |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_pll_ops); |
| |
| const struct clk_ops meson_clk_pll_ro_ops = { |
| .recalc_rate = meson_clk_pll_recalc_rate, |
| .is_enabled = meson_clk_pll_is_enabled, |
| }; |
| EXPORT_SYMBOL_GPL(meson_clk_pll_ro_ops); |
| |
| MODULE_DESCRIPTION("Amlogic PLL driver"); |
| MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>"); |
| MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); |
| MODULE_LICENSE("GPL v2"); |