| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * For License see notice in hfc_multi.c |
| * |
| * special IO and init functions for the embedded XHFC board |
| * from Speech Design |
| * |
| */ |
| |
| #include <asm/cpm1.h> |
| |
| /* Change this to the value used by your board */ |
| #ifndef IMAP_ADDR |
| #define IMAP_ADDR 0xFFF00000 |
| #endif |
| |
| static void |
| #ifdef HFC_REGISTER_DEBUG |
| HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val, |
| const char *function, int line) |
| #else |
| HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val) |
| #endif |
| { |
| hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; |
| writeb(reg, hc->xhfc_memaddr); |
| hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); |
| writeb(val, hc->xhfc_memdata); |
| } |
| static u_char |
| #ifdef HFC_REGISTER_DEBUG |
| HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) |
| #else |
| HFC_inb_embsd(struct hfc_multi *hc, u_char reg) |
| #endif |
| { |
| hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; |
| writeb(reg, hc->xhfc_memaddr); |
| hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); |
| return readb(hc->xhfc_memdata); |
| } |
| static u_short |
| #ifdef HFC_REGISTER_DEBUG |
| HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) |
| #else |
| HFC_inw_embsd(struct hfc_multi *hc, u_char reg) |
| #endif |
| { |
| hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; |
| writeb(reg, hc->xhfc_memaddr); |
| hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); |
| return readb(hc->xhfc_memdata); |
| } |
| static void |
| #ifdef HFC_REGISTER_DEBUG |
| HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line) |
| #else |
| HFC_wait_embsd(struct hfc_multi *hc) |
| #endif |
| { |
| hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; |
| writeb(R_STATUS, hc->xhfc_memaddr); |
| hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); |
| while (readb(hc->xhfc_memdata) & V_BUSY) |
| cpu_relax(); |
| } |
| |
| /* write fifo data (EMBSD) */ |
| void |
| write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) |
| { |
| hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; |
| *hc->xhfc_memaddr = A_FIFO_DATA0; |
| hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); |
| while (len) { |
| *hc->xhfc_memdata = *data; |
| data++; |
| len--; |
| } |
| } |
| |
| /* read fifo data (EMBSD) */ |
| void |
| read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) |
| { |
| hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; |
| *hc->xhfc_memaddr = A_FIFO_DATA0; |
| hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); |
| while (len) { |
| *data = (u_char)(*hc->xhfc_memdata); |
| data++; |
| len--; |
| } |
| } |
| |
| static int |
| setup_embedded(struct hfc_multi *hc, struct hm_map *m) |
| { |
| printk(KERN_INFO |
| "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n", |
| m->vendor_name, m->card_name, m->clock2 ? "double" : "normal"); |
| |
| hc->pci_dev = NULL; |
| if (m->clock2) |
| test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip); |
| |
| hc->leds = m->leds; |
| hc->ledstate = 0xAFFEAFFE; |
| hc->opticalsupport = m->opticalsupport; |
| |
| hc->pci_iobase = 0; |
| hc->pci_membase = 0; |
| hc->xhfc_membase = NULL; |
| hc->xhfc_memaddr = NULL; |
| hc->xhfc_memdata = NULL; |
| |
| /* set memory access methods */ |
| if (m->io_mode) /* use mode from card config */ |
| hc->io_mode = m->io_mode; |
| switch (hc->io_mode) { |
| case HFC_IO_MODE_EMBSD: |
| test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip); |
| hc->slots = 128; /* required */ |
| hc->HFC_outb = HFC_outb_embsd; |
| hc->HFC_inb = HFC_inb_embsd; |
| hc->HFC_inw = HFC_inw_embsd; |
| hc->HFC_wait = HFC_wait_embsd; |
| hc->read_fifo = read_fifo_embsd; |
| hc->write_fifo = write_fifo_embsd; |
| hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id; |
| hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase, |
| XHFC_MEMSIZE); |
| if (!hc->xhfc_membase) { |
| printk(KERN_WARNING |
| "HFC-multi: failed to remap xhfc address space. " |
| "(internal error)\n"); |
| return -EIO; |
| } |
| hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4); |
| hc->xhfc_memdata = (u_long *)(hc->xhfc_membase); |
| printk(KERN_INFO |
| "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx " |
| "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n", |
| (u_long)hc->xhfc_membase, hc->xhfc_origmembase, |
| (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata); |
| break; |
| default: |
| printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); |
| return -EIO; |
| } |
| |
| /* Prepare the MPC8XX PortA 10 as output (address/data selector) */ |
| hc->immap = (struct immap *)(IMAP_ADDR); |
| hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0); |
| hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0); |
| hc->immap->im_ioport.iop_padir |= PA_XHFC_A0; |
| |
| /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */ |
| hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id); |
| hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk); |
| hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk); |
| hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk); |
| |
| /* At this point the needed config is done */ |
| /* fifos are still not enabled */ |
| return 0; |
| } |