| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LP5521/LP5523/LP55231/LP5562 Common Driver |
| * |
| * Copyright 2012 Texas Instruments |
| * |
| * Author: Milo(Woogyom) Kim <milo.kim@ti.com> |
| * |
| * Derived from leds-lp5521.c, leds-lp5523.c |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/leds-lp55xx.h> |
| #include <linux/slab.h> |
| #include <linux/gpio/consumer.h> |
| |
| #include "leds-lp55xx-common.h" |
| |
| /* External clock rate */ |
| #define LP55XX_CLK_32K 32768 |
| |
| static struct lp55xx_led *cdev_to_lp55xx_led(struct led_classdev *cdev) |
| { |
| return container_of(cdev, struct lp55xx_led, cdev); |
| } |
| |
| static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev) |
| { |
| return cdev_to_lp55xx_led(dev_get_drvdata(dev)); |
| } |
| |
| static struct lp55xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) |
| { |
| return container_of(mc_cdev, struct lp55xx_led, mc_cdev); |
| } |
| |
| static void lp55xx_reset_device(struct lp55xx_chip *chip) |
| { |
| struct lp55xx_device_config *cfg = chip->cfg; |
| u8 addr = cfg->reset.addr; |
| u8 val = cfg->reset.val; |
| |
| /* no error checking here because no ACK from the device after reset */ |
| lp55xx_write(chip, addr, val); |
| } |
| |
| static int lp55xx_detect_device(struct lp55xx_chip *chip) |
| { |
| struct lp55xx_device_config *cfg = chip->cfg; |
| u8 addr = cfg->enable.addr; |
| u8 val = cfg->enable.val; |
| int ret; |
| |
| ret = lp55xx_write(chip, addr, val); |
| if (ret) |
| return ret; |
| |
| usleep_range(1000, 2000); |
| |
| ret = lp55xx_read(chip, addr, &val); |
| if (ret) |
| return ret; |
| |
| if (val != cfg->enable.val) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int lp55xx_post_init_device(struct lp55xx_chip *chip) |
| { |
| struct lp55xx_device_config *cfg = chip->cfg; |
| |
| if (!cfg->post_init_device) |
| return 0; |
| |
| return cfg->post_init_device(chip); |
| } |
| |
| static ssize_t led_current_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct lp55xx_led *led = dev_to_lp55xx_led(dev); |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", led->led_current); |
| } |
| |
| static ssize_t led_current_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct lp55xx_led *led = dev_to_lp55xx_led(dev); |
| struct lp55xx_chip *chip = led->chip; |
| unsigned long curr; |
| |
| if (kstrtoul(buf, 0, &curr)) |
| return -EINVAL; |
| |
| if (curr > led->max_current) |
| return -EINVAL; |
| |
| if (!chip->cfg->set_led_current) |
| return len; |
| |
| mutex_lock(&chip->lock); |
| chip->cfg->set_led_current(led, (u8)curr); |
| mutex_unlock(&chip->lock); |
| |
| return len; |
| } |
| |
| static ssize_t max_current_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct lp55xx_led *led = dev_to_lp55xx_led(dev); |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", led->max_current); |
| } |
| |
| static DEVICE_ATTR_RW(led_current); |
| static DEVICE_ATTR_RO(max_current); |
| |
| static struct attribute *lp55xx_led_attrs[] = { |
| &dev_attr_led_current.attr, |
| &dev_attr_max_current.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(lp55xx_led); |
| |
| static int lp55xx_set_mc_brightness(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); |
| struct lp55xx_led *led = mcled_cdev_to_led(mc_dev); |
| struct lp55xx_device_config *cfg = led->chip->cfg; |
| |
| led_mc_calc_color_components(&led->mc_cdev, brightness); |
| return cfg->multicolor_brightness_fn(led); |
| |
| } |
| |
| static int lp55xx_set_brightness(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct lp55xx_led *led = cdev_to_lp55xx_led(cdev); |
| struct lp55xx_device_config *cfg = led->chip->cfg; |
| |
| led->brightness = (u8)brightness; |
| return cfg->brightness_fn(led); |
| } |
| |
| static int lp55xx_init_led(struct lp55xx_led *led, |
| struct lp55xx_chip *chip, int chan) |
| { |
| struct lp55xx_platform_data *pdata = chip->pdata; |
| struct lp55xx_device_config *cfg = chip->cfg; |
| struct device *dev = &chip->cl->dev; |
| int max_channel = cfg->max_channel; |
| struct mc_subled *mc_led_info; |
| struct led_classdev *led_cdev; |
| char name[32]; |
| int i, j = 0; |
| int ret; |
| |
| if (chan >= max_channel) { |
| dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel); |
| return -EINVAL; |
| } |
| |
| if (pdata->led_config[chan].led_current == 0) |
| return 0; |
| |
| if (pdata->led_config[chan].name) { |
| led->cdev.name = pdata->led_config[chan].name; |
| } else { |
| snprintf(name, sizeof(name), "%s:channel%d", |
| pdata->label ? : chip->cl->name, chan); |
| led->cdev.name = name; |
| } |
| |
| if (pdata->led_config[chan].num_colors > 1) { |
| mc_led_info = devm_kcalloc(dev, |
| pdata->led_config[chan].num_colors, |
| sizeof(*mc_led_info), GFP_KERNEL); |
| if (!mc_led_info) |
| return -ENOMEM; |
| |
| led_cdev = &led->mc_cdev.led_cdev; |
| led_cdev->name = led->cdev.name; |
| led_cdev->brightness_set_blocking = lp55xx_set_mc_brightness; |
| led->mc_cdev.num_colors = pdata->led_config[chan].num_colors; |
| for (i = 0; i < led->mc_cdev.num_colors; i++) { |
| mc_led_info[i].color_index = |
| pdata->led_config[chan].color_id[i]; |
| mc_led_info[i].channel = |
| pdata->led_config[chan].output_num[i]; |
| j++; |
| } |
| |
| led->mc_cdev.subled_info = mc_led_info; |
| } else { |
| led->cdev.brightness_set_blocking = lp55xx_set_brightness; |
| } |
| |
| led->cdev.groups = lp55xx_led_groups; |
| led->cdev.default_trigger = pdata->led_config[chan].default_trigger; |
| led->led_current = pdata->led_config[chan].led_current; |
| led->max_current = pdata->led_config[chan].max_current; |
| led->chan_nr = pdata->led_config[chan].chan_nr; |
| |
| if (led->chan_nr >= max_channel) { |
| dev_err(dev, "Use channel numbers between 0 and %d\n", |
| max_channel - 1); |
| return -EINVAL; |
| } |
| |
| if (pdata->led_config[chan].num_colors > 1) |
| ret = devm_led_classdev_multicolor_register(dev, &led->mc_cdev); |
| else |
| ret = devm_led_classdev_register(dev, &led->cdev); |
| |
| if (ret) { |
| dev_err(dev, "led register err: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void lp55xx_firmware_loaded(const struct firmware *fw, void *context) |
| { |
| struct lp55xx_chip *chip = context; |
| struct device *dev = &chip->cl->dev; |
| enum lp55xx_engine_index idx = chip->engine_idx; |
| |
| if (!fw) { |
| dev_err(dev, "firmware request failed\n"); |
| return; |
| } |
| |
| /* handling firmware data is chip dependent */ |
| mutex_lock(&chip->lock); |
| |
| chip->engines[idx - 1].mode = LP55XX_ENGINE_LOAD; |
| chip->fw = fw; |
| if (chip->cfg->firmware_cb) |
| chip->cfg->firmware_cb(chip); |
| |
| mutex_unlock(&chip->lock); |
| |
| /* firmware should be released for other channel use */ |
| release_firmware(chip->fw); |
| chip->fw = NULL; |
| } |
| |
| static int lp55xx_request_firmware(struct lp55xx_chip *chip) |
| { |
| const char *name = chip->cl->name; |
| struct device *dev = &chip->cl->dev; |
| |
| return request_firmware_nowait(THIS_MODULE, false, name, dev, |
| GFP_KERNEL, chip, lp55xx_firmware_loaded); |
| } |
| |
| static ssize_t select_engine_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| struct lp55xx_chip *chip = led->chip; |
| |
| return sprintf(buf, "%d\n", chip->engine_idx); |
| } |
| |
| static ssize_t select_engine_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| struct lp55xx_chip *chip = led->chip; |
| unsigned long val; |
| int ret; |
| |
| if (kstrtoul(buf, 0, &val)) |
| return -EINVAL; |
| |
| /* select the engine to be run */ |
| |
| switch (val) { |
| case LP55XX_ENGINE_1: |
| case LP55XX_ENGINE_2: |
| case LP55XX_ENGINE_3: |
| mutex_lock(&chip->lock); |
| chip->engine_idx = val; |
| ret = lp55xx_request_firmware(chip); |
| mutex_unlock(&chip->lock); |
| break; |
| default: |
| dev_err(dev, "%lu: invalid engine index. (1, 2, 3)\n", val); |
| return -EINVAL; |
| } |
| |
| if (ret) { |
| dev_err(dev, "request firmware err: %d\n", ret); |
| return ret; |
| } |
| |
| return len; |
| } |
| |
| static inline void lp55xx_run_engine(struct lp55xx_chip *chip, bool start) |
| { |
| if (chip->cfg->run_engine) |
| chip->cfg->run_engine(chip, start); |
| } |
| |
| static ssize_t run_engine_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); |
| struct lp55xx_chip *chip = led->chip; |
| unsigned long val; |
| |
| if (kstrtoul(buf, 0, &val)) |
| return -EINVAL; |
| |
| /* run or stop the selected engine */ |
| |
| if (val <= 0) { |
| lp55xx_run_engine(chip, false); |
| return len; |
| } |
| |
| mutex_lock(&chip->lock); |
| lp55xx_run_engine(chip, true); |
| mutex_unlock(&chip->lock); |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR_RW(select_engine); |
| static DEVICE_ATTR_WO(run_engine); |
| |
| static struct attribute *lp55xx_engine_attributes[] = { |
| &dev_attr_select_engine.attr, |
| &dev_attr_run_engine.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group lp55xx_engine_attr_group = { |
| .attrs = lp55xx_engine_attributes, |
| }; |
| |
| int lp55xx_write(struct lp55xx_chip *chip, u8 reg, u8 val) |
| { |
| return i2c_smbus_write_byte_data(chip->cl, reg, val); |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_write); |
| |
| int lp55xx_read(struct lp55xx_chip *chip, u8 reg, u8 *val) |
| { |
| s32 ret; |
| |
| ret = i2c_smbus_read_byte_data(chip->cl, reg); |
| if (ret < 0) |
| return ret; |
| |
| *val = ret; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_read); |
| |
| int lp55xx_update_bits(struct lp55xx_chip *chip, u8 reg, u8 mask, u8 val) |
| { |
| int ret; |
| u8 tmp; |
| |
| ret = lp55xx_read(chip, reg, &tmp); |
| if (ret) |
| return ret; |
| |
| tmp &= ~mask; |
| tmp |= val & mask; |
| |
| return lp55xx_write(chip, reg, tmp); |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_update_bits); |
| |
| bool lp55xx_is_extclk_used(struct lp55xx_chip *chip) |
| { |
| struct clk *clk; |
| int err; |
| |
| clk = devm_clk_get(&chip->cl->dev, "32k_clk"); |
| if (IS_ERR(clk)) |
| goto use_internal_clk; |
| |
| err = clk_prepare_enable(clk); |
| if (err) |
| goto use_internal_clk; |
| |
| if (clk_get_rate(clk) != LP55XX_CLK_32K) { |
| clk_disable_unprepare(clk); |
| goto use_internal_clk; |
| } |
| |
| dev_info(&chip->cl->dev, "%dHz external clock used\n", LP55XX_CLK_32K); |
| |
| chip->clk = clk; |
| return true; |
| |
| use_internal_clk: |
| dev_info(&chip->cl->dev, "internal clock used\n"); |
| return false; |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_is_extclk_used); |
| |
| int lp55xx_init_device(struct lp55xx_chip *chip) |
| { |
| struct lp55xx_platform_data *pdata; |
| struct lp55xx_device_config *cfg; |
| struct device *dev = &chip->cl->dev; |
| int ret = 0; |
| |
| WARN_ON(!chip); |
| |
| pdata = chip->pdata; |
| cfg = chip->cfg; |
| |
| if (!pdata || !cfg) |
| return -EINVAL; |
| |
| if (pdata->enable_gpiod) { |
| gpiod_set_consumer_name(pdata->enable_gpiod, "LP55xx enable"); |
| gpiod_set_value(pdata->enable_gpiod, 0); |
| usleep_range(1000, 2000); /* Keep enable down at least 1ms */ |
| gpiod_set_value(pdata->enable_gpiod, 1); |
| usleep_range(1000, 2000); /* 500us abs min. */ |
| } |
| |
| lp55xx_reset_device(chip); |
| |
| /* |
| * Exact value is not available. 10 - 20ms |
| * appears to be enough for reset. |
| */ |
| usleep_range(10000, 20000); |
| |
| ret = lp55xx_detect_device(chip); |
| if (ret) { |
| dev_err(dev, "device detection err: %d\n", ret); |
| goto err; |
| } |
| |
| /* chip specific initialization */ |
| ret = lp55xx_post_init_device(chip); |
| if (ret) { |
| dev_err(dev, "post init device err: %d\n", ret); |
| goto err_post_init; |
| } |
| |
| return 0; |
| |
| err_post_init: |
| lp55xx_deinit_device(chip); |
| err: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_init_device); |
| |
| void lp55xx_deinit_device(struct lp55xx_chip *chip) |
| { |
| struct lp55xx_platform_data *pdata = chip->pdata; |
| |
| if (chip->clk) |
| clk_disable_unprepare(chip->clk); |
| |
| if (pdata->enable_gpiod) |
| gpiod_set_value(pdata->enable_gpiod, 0); |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_deinit_device); |
| |
| int lp55xx_register_leds(struct lp55xx_led *led, struct lp55xx_chip *chip) |
| { |
| struct lp55xx_platform_data *pdata = chip->pdata; |
| struct lp55xx_device_config *cfg = chip->cfg; |
| int num_channels = pdata->num_channels; |
| struct lp55xx_led *each; |
| u8 led_current; |
| int ret; |
| int i; |
| |
| if (!cfg->brightness_fn) { |
| dev_err(&chip->cl->dev, "empty brightness configuration\n"); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < num_channels; i++) { |
| |
| /* do not initialize channels that are not connected */ |
| if (pdata->led_config[i].led_current == 0) |
| continue; |
| |
| led_current = pdata->led_config[i].led_current; |
| each = led + i; |
| ret = lp55xx_init_led(each, chip, i); |
| if (ret) |
| goto err_init_led; |
| |
| chip->num_leds++; |
| each->chip = chip; |
| |
| /* setting led current at each channel */ |
| if (cfg->set_led_current) |
| cfg->set_led_current(each, led_current); |
| } |
| |
| return 0; |
| |
| err_init_led: |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_register_leds); |
| |
| int lp55xx_register_sysfs(struct lp55xx_chip *chip) |
| { |
| struct device *dev = &chip->cl->dev; |
| struct lp55xx_device_config *cfg = chip->cfg; |
| int ret; |
| |
| if (!cfg->run_engine || !cfg->firmware_cb) |
| goto dev_specific_attrs; |
| |
| ret = sysfs_create_group(&dev->kobj, &lp55xx_engine_attr_group); |
| if (ret) |
| return ret; |
| |
| dev_specific_attrs: |
| return cfg->dev_attr_group ? |
| sysfs_create_group(&dev->kobj, cfg->dev_attr_group) : 0; |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_register_sysfs); |
| |
| void lp55xx_unregister_sysfs(struct lp55xx_chip *chip) |
| { |
| struct device *dev = &chip->cl->dev; |
| struct lp55xx_device_config *cfg = chip->cfg; |
| |
| if (cfg->dev_attr_group) |
| sysfs_remove_group(&dev->kobj, cfg->dev_attr_group); |
| |
| sysfs_remove_group(&dev->kobj, &lp55xx_engine_attr_group); |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs); |
| |
| static int lp55xx_parse_common_child(struct device_node *np, |
| struct lp55xx_led_config *cfg, |
| int led_number, int *chan_nr) |
| { |
| int ret; |
| |
| of_property_read_string(np, "chan-name", |
| &cfg[led_number].name); |
| of_property_read_u8(np, "led-cur", |
| &cfg[led_number].led_current); |
| of_property_read_u8(np, "max-cur", |
| &cfg[led_number].max_current); |
| |
| ret = of_property_read_u32(np, "reg", chan_nr); |
| if (ret) |
| return ret; |
| |
| if (*chan_nr < 0 || *chan_nr > cfg->max_channel) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int lp55xx_parse_multi_led_child(struct device_node *child, |
| struct lp55xx_led_config *cfg, |
| int child_number, int color_number) |
| { |
| int chan_nr, color_id, ret; |
| |
| ret = lp55xx_parse_common_child(child, cfg, child_number, &chan_nr); |
| if (ret) |
| return ret; |
| |
| ret = of_property_read_u32(child, "color", &color_id); |
| if (ret) |
| return ret; |
| |
| cfg[child_number].color_id[color_number] = color_id; |
| cfg[child_number].output_num[color_number] = chan_nr; |
| |
| return 0; |
| } |
| |
| static int lp55xx_parse_multi_led(struct device_node *np, |
| struct lp55xx_led_config *cfg, |
| int child_number) |
| { |
| struct device_node *child; |
| int num_colors = 0, ret; |
| |
| for_each_available_child_of_node(np, child) { |
| ret = lp55xx_parse_multi_led_child(child, cfg, child_number, |
| num_colors); |
| if (ret) { |
| of_node_put(child); |
| return ret; |
| } |
| num_colors++; |
| } |
| |
| cfg[child_number].num_colors = num_colors; |
| |
| return 0; |
| } |
| |
| static int lp55xx_parse_logical_led(struct device_node *np, |
| struct lp55xx_led_config *cfg, |
| int child_number) |
| { |
| int led_color, ret; |
| int chan_nr = 0; |
| |
| cfg[child_number].default_trigger = |
| of_get_property(np, "linux,default-trigger", NULL); |
| |
| ret = of_property_read_u32(np, "color", &led_color); |
| if (ret) |
| return ret; |
| |
| if (led_color == LED_COLOR_ID_RGB) |
| return lp55xx_parse_multi_led(np, cfg, child_number); |
| |
| ret = lp55xx_parse_common_child(np, cfg, child_number, &chan_nr); |
| if (ret < 0) |
| return ret; |
| |
| cfg[child_number].chan_nr = chan_nr; |
| |
| return ret; |
| } |
| |
| struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, |
| struct device_node *np, |
| struct lp55xx_chip *chip) |
| { |
| struct device_node *child; |
| struct lp55xx_platform_data *pdata; |
| struct lp55xx_led_config *cfg; |
| int num_channels; |
| int i = 0; |
| int ret; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return ERR_PTR(-ENOMEM); |
| |
| num_channels = of_get_available_child_count(np); |
| if (num_channels == 0) { |
| dev_err(dev, "no LED channels\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| cfg = devm_kcalloc(dev, num_channels, sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) |
| return ERR_PTR(-ENOMEM); |
| |
| pdata->led_config = &cfg[0]; |
| pdata->num_channels = num_channels; |
| cfg->max_channel = chip->cfg->max_channel; |
| |
| for_each_available_child_of_node(np, child) { |
| ret = lp55xx_parse_logical_led(child, cfg, i); |
| if (ret) { |
| of_node_put(child); |
| return ERR_PTR(-EINVAL); |
| } |
| i++; |
| } |
| |
| of_property_read_string(np, "label", &pdata->label); |
| of_property_read_u8(np, "clock-mode", &pdata->clock_mode); |
| |
| pdata->enable_gpiod = devm_gpiod_get_optional(dev, "enable", |
| GPIOD_ASIS); |
| if (IS_ERR(pdata->enable_gpiod)) |
| return ERR_CAST(pdata->enable_gpiod); |
| |
| /* LP8501 specific */ |
| of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel); |
| |
| return pdata; |
| } |
| EXPORT_SYMBOL_GPL(lp55xx_of_populate_pdata); |
| |
| MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); |
| MODULE_DESCRIPTION("LP55xx Common Driver"); |
| MODULE_LICENSE("GPL"); |