| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Scaler library |
| * |
| * Copyright (c) 2013 Texas Instruments Inc. |
| * |
| * David Griego, <dagriego@biglakesoftware.com> |
| * Dale Farnsworth, <dale@farnsworth.org> |
| * Archit Taneja, <archit@ti.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include "sc.h" |
| #include "sc_coeff.h" |
| |
| void sc_dump_regs(struct sc_data *sc) |
| { |
| struct device *dev = &sc->pdev->dev; |
| |
| #define DUMPREG(r) dev_dbg(dev, "%-35s %08x\n", #r, \ |
| ioread32(sc->base + CFG_##r)) |
| |
| dev_dbg(dev, "SC Registers @ %pa:\n", &sc->res->start); |
| |
| DUMPREG(SC0); |
| DUMPREG(SC1); |
| DUMPREG(SC2); |
| DUMPREG(SC3); |
| DUMPREG(SC4); |
| DUMPREG(SC5); |
| DUMPREG(SC6); |
| DUMPREG(SC8); |
| DUMPREG(SC9); |
| DUMPREG(SC10); |
| DUMPREG(SC11); |
| DUMPREG(SC12); |
| DUMPREG(SC13); |
| DUMPREG(SC17); |
| DUMPREG(SC18); |
| DUMPREG(SC19); |
| DUMPREG(SC20); |
| DUMPREG(SC21); |
| DUMPREG(SC22); |
| DUMPREG(SC23); |
| DUMPREG(SC24); |
| DUMPREG(SC25); |
| |
| #undef DUMPREG |
| } |
| EXPORT_SYMBOL(sc_dump_regs); |
| |
| /* |
| * set the horizontal scaler coefficients according to the ratio of output to |
| * input widths, after accounting for up to two levels of decimation |
| */ |
| void sc_set_hs_coeffs(struct sc_data *sc, void *addr, unsigned int src_w, |
| unsigned int dst_w) |
| { |
| int sixteenths; |
| int idx; |
| int i, j; |
| u16 *coeff_h = addr; |
| const u16 *cp; |
| |
| if (dst_w > src_w) { |
| idx = HS_UP_SCALE; |
| } else { |
| if ((dst_w << 1) < src_w) |
| dst_w <<= 1; /* first level decimation */ |
| if ((dst_w << 1) < src_w) |
| dst_w <<= 1; /* second level decimation */ |
| |
| if (dst_w == src_w) { |
| idx = HS_LE_16_16_SCALE; |
| } else { |
| sixteenths = (dst_w << 4) / src_w; |
| if (sixteenths < 8) |
| sixteenths = 8; |
| idx = HS_LT_9_16_SCALE + sixteenths - 8; |
| } |
| } |
| |
| cp = scaler_hs_coeffs[idx]; |
| |
| for (i = 0; i < SC_NUM_PHASES * 2; i++) { |
| for (j = 0; j < SC_H_NUM_TAPS; j++) |
| *coeff_h++ = *cp++; |
| /* |
| * for each phase, the scaler expects space for 8 coefficients |
| * in it's memory. For the horizontal scaler, we copy the first |
| * 7 coefficients and skip the last slot to move to the next |
| * row to hold coefficients for the next phase |
| */ |
| coeff_h += SC_NUM_TAPS_MEM_ALIGN - SC_H_NUM_TAPS; |
| } |
| |
| sc->load_coeff_h = true; |
| } |
| EXPORT_SYMBOL(sc_set_hs_coeffs); |
| |
| /* |
| * set the vertical scaler coefficients according to the ratio of output to |
| * input heights |
| */ |
| void sc_set_vs_coeffs(struct sc_data *sc, void *addr, unsigned int src_h, |
| unsigned int dst_h) |
| { |
| int sixteenths; |
| int idx; |
| int i, j; |
| u16 *coeff_v = addr; |
| const u16 *cp; |
| |
| if (dst_h > src_h) { |
| idx = VS_UP_SCALE; |
| } else if (dst_h == src_h) { |
| idx = VS_1_TO_1_SCALE; |
| } else { |
| sixteenths = (dst_h << 4) / src_h; |
| if (sixteenths < 8) |
| sixteenths = 8; |
| idx = VS_LT_9_16_SCALE + sixteenths - 8; |
| } |
| |
| cp = scaler_vs_coeffs[idx]; |
| |
| for (i = 0; i < SC_NUM_PHASES * 2; i++) { |
| for (j = 0; j < SC_V_NUM_TAPS; j++) |
| *coeff_v++ = *cp++; |
| /* |
| * for the vertical scaler, we copy the first 5 coefficients and |
| * skip the last 3 slots to move to the next row to hold |
| * coefficients for the next phase |
| */ |
| coeff_v += SC_NUM_TAPS_MEM_ALIGN - SC_V_NUM_TAPS; |
| } |
| |
| sc->load_coeff_v = true; |
| } |
| EXPORT_SYMBOL(sc_set_vs_coeffs); |
| |
| void sc_config_scaler(struct sc_data *sc, u32 *sc_reg0, u32 *sc_reg8, |
| u32 *sc_reg17, unsigned int src_w, unsigned int src_h, |
| unsigned int dst_w, unsigned int dst_h) |
| { |
| struct device *dev = &sc->pdev->dev; |
| u32 val; |
| int dcm_x, dcm_shift; |
| bool use_rav; |
| unsigned long lltmp; |
| u32 lin_acc_inc, lin_acc_inc_u; |
| u32 col_acc_offset; |
| u16 factor = 0; |
| int row_acc_init_rav = 0, row_acc_init_rav_b = 0; |
| u32 row_acc_inc = 0, row_acc_offset = 0, row_acc_offset_b = 0; |
| /* |
| * location of SC register in payload memory with respect to the first |
| * register in the mmr address data block |
| */ |
| u32 *sc_reg9 = sc_reg8 + 1; |
| u32 *sc_reg12 = sc_reg8 + 4; |
| u32 *sc_reg13 = sc_reg8 + 5; |
| u32 *sc_reg24 = sc_reg17 + 7; |
| |
| val = sc_reg0[0]; |
| |
| /* clear all the features(they may get enabled elsewhere later) */ |
| val &= ~(CFG_SELFGEN_FID | CFG_TRIM | CFG_ENABLE_SIN2_VER_INTP | |
| CFG_INTERLACE_I | CFG_DCM_4X | CFG_DCM_2X | CFG_AUTO_HS | |
| CFG_ENABLE_EV | CFG_USE_RAV | CFG_INVT_FID | CFG_SC_BYPASS | |
| CFG_INTERLACE_O | CFG_Y_PK_EN | CFG_HP_BYPASS | CFG_LINEAR); |
| |
| if (src_w == dst_w && src_h == dst_h) { |
| val |= CFG_SC_BYPASS; |
| sc_reg0[0] = val; |
| return; |
| } |
| |
| /* we only support linear scaling for now */ |
| val |= CFG_LINEAR; |
| |
| /* configure horizontal scaler */ |
| |
| /* enable 2X or 4X decimation */ |
| dcm_x = src_w / dst_w; |
| if (dcm_x > 4) { |
| val |= CFG_DCM_4X; |
| dcm_shift = 2; |
| } else if (dcm_x > 2) { |
| val |= CFG_DCM_2X; |
| dcm_shift = 1; |
| } else { |
| dcm_shift = 0; |
| } |
| |
| lltmp = dst_w - 1; |
| lin_acc_inc = div64_u64(((u64)(src_w >> dcm_shift) - 1) << 24, lltmp); |
| lin_acc_inc_u = 0; |
| col_acc_offset = 0; |
| |
| dev_dbg(dev, "hs config: src_w = %d, dst_w = %d, decimation = %s, lin_acc_inc = %08x\n", |
| src_w, dst_w, dcm_shift == 2 ? "4x" : |
| (dcm_shift == 1 ? "2x" : "none"), lin_acc_inc); |
| |
| /* configure vertical scaler */ |
| |
| /* use RAV for vertical scaler if vertical downscaling is > 4x */ |
| if (dst_h < (src_h >> 2)) { |
| use_rav = true; |
| val |= CFG_USE_RAV; |
| } else { |
| use_rav = false; |
| } |
| |
| if (use_rav) { |
| /* use RAV */ |
| factor = (u16) ((dst_h << 10) / src_h); |
| |
| row_acc_init_rav = factor + ((1 + factor) >> 1); |
| if (row_acc_init_rav >= 1024) |
| row_acc_init_rav -= 1024; |
| |
| row_acc_init_rav_b = row_acc_init_rav + |
| (1 + (row_acc_init_rav >> 1)) - |
| (1024 >> 1); |
| |
| if (row_acc_init_rav_b < 0) { |
| row_acc_init_rav_b += row_acc_init_rav; |
| row_acc_init_rav *= 2; |
| } |
| |
| dev_dbg(dev, "vs config(RAV): src_h = %d, dst_h = %d, factor = %d, acc_init = %08x, acc_init_b = %08x\n", |
| src_h, dst_h, factor, row_acc_init_rav, |
| row_acc_init_rav_b); |
| } else { |
| /* use polyphase */ |
| row_acc_inc = ((src_h - 1) << 16) / (dst_h - 1); |
| row_acc_offset = 0; |
| row_acc_offset_b = 0; |
| |
| dev_dbg(dev, "vs config(POLY): src_h = %d, dst_h = %d,row_acc_inc = %08x\n", |
| src_h, dst_h, row_acc_inc); |
| } |
| |
| |
| sc_reg0[0] = val; |
| sc_reg0[1] = row_acc_inc; |
| sc_reg0[2] = row_acc_offset; |
| sc_reg0[3] = row_acc_offset_b; |
| |
| sc_reg0[4] = ((lin_acc_inc_u & CFG_LIN_ACC_INC_U_MASK) << |
| CFG_LIN_ACC_INC_U_SHIFT) | (dst_w << CFG_TAR_W_SHIFT) | |
| (dst_h << CFG_TAR_H_SHIFT); |
| |
| sc_reg0[5] = (src_w << CFG_SRC_W_SHIFT) | (src_h << CFG_SRC_H_SHIFT); |
| |
| sc_reg0[6] = (row_acc_init_rav_b << CFG_ROW_ACC_INIT_RAV_B_SHIFT) | |
| (row_acc_init_rav << CFG_ROW_ACC_INIT_RAV_SHIFT); |
| |
| *sc_reg9 = lin_acc_inc; |
| |
| *sc_reg12 = col_acc_offset << CFG_COL_ACC_OFFSET_SHIFT; |
| |
| *sc_reg13 = factor; |
| |
| *sc_reg24 = (src_w << CFG_ORG_W_SHIFT) | (src_h << CFG_ORG_H_SHIFT); |
| } |
| EXPORT_SYMBOL(sc_config_scaler); |
| |
| struct sc_data *sc_create(struct platform_device *pdev, const char *res_name) |
| { |
| struct sc_data *sc; |
| |
| dev_dbg(&pdev->dev, "sc_create\n"); |
| |
| sc = devm_kzalloc(&pdev->dev, sizeof(*sc), GFP_KERNEL); |
| if (!sc) { |
| dev_err(&pdev->dev, "couldn't alloc sc_data\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| sc->pdev = pdev; |
| |
| sc->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); |
| if (!sc->res) { |
| dev_err(&pdev->dev, "missing '%s' platform resources data\n", |
| res_name); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| sc->base = devm_ioremap_resource(&pdev->dev, sc->res); |
| if (IS_ERR(sc->base)) { |
| dev_err(&pdev->dev, "failed to ioremap\n"); |
| return ERR_CAST(sc->base); |
| } |
| |
| return sc; |
| } |
| EXPORT_SYMBOL(sc_create); |
| |
| MODULE_DESCRIPTION("TI VIP/VPE Scaler"); |
| MODULE_AUTHOR("Texas Instruments Inc."); |
| MODULE_LICENSE("GPL v2"); |