| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * caiaq.c: ALSA driver for caiaq/NativeInstruments devices |
| * |
| * Copyright (c) 2007 Daniel Mack <daniel@caiaq.de> |
| * Karsten Wiese <fzu@wemgehoertderstaat.de> |
| */ |
| |
| #include <linux/moduleparam.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/gfp.h> |
| #include <linux/usb.h> |
| #include <sound/initval.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| |
| #include "device.h" |
| #include "audio.h" |
| #include "midi.h" |
| #include "control.h" |
| #include "input.h" |
| |
| MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); |
| MODULE_DESCRIPTION("caiaq USB audio"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{Native Instruments,RigKontrol2}," |
| "{Native Instruments,RigKontrol3}," |
| "{Native Instruments,Kore Controller}," |
| "{Native Instruments,Kore Controller 2}," |
| "{Native Instruments,Audio Kontrol 1}," |
| "{Native Instruments,Audio 2 DJ}," |
| "{Native Instruments,Audio 4 DJ}," |
| "{Native Instruments,Audio 8 DJ}," |
| "{Native Instruments,Traktor Audio 2}," |
| "{Native Instruments,Session I/O}," |
| "{Native Instruments,GuitarRig mobile}," |
| "{Native Instruments,Traktor Kontrol X1}," |
| "{Native Instruments,Traktor Kontrol S4}," |
| "{Native Instruments,Maschine Controller}}"); |
| |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ |
| static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ |
| static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for the caiaq sound device"); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for the caiaq soundcard."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable the caiaq soundcard."); |
| |
| enum { |
| SAMPLERATE_44100 = 0, |
| SAMPLERATE_48000 = 1, |
| SAMPLERATE_96000 = 2, |
| SAMPLERATE_192000 = 3, |
| SAMPLERATE_88200 = 4, |
| SAMPLERATE_INVALID = 0xff |
| }; |
| |
| enum { |
| DEPTH_NONE = 0, |
| DEPTH_16 = 1, |
| DEPTH_24 = 2, |
| DEPTH_32 = 3 |
| }; |
| |
| static const struct usb_device_id snd_usb_id_table[] = { |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_RIGKONTROL2 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_RIGKONTROL3 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_KORECONTROLLER |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_KORECONTROLLER2 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_AK1 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_AUDIO8DJ |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_SESSIONIO |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_GUITARRIGMOBILE |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_AUDIO4DJ |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_AUDIO2DJ |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_TRAKTORKONTROLX1 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_TRAKTORKONTROLS4 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_TRAKTORAUDIO2 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = USB_VID_NATIVEINSTRUMENTS, |
| .idProduct = USB_PID_MASCHINECONTROLLER |
| }, |
| { /* terminator */ } |
| }; |
| |
| static void usb_ep1_command_reply_dispatch (struct urb* urb) |
| { |
| int ret; |
| struct device *dev = &urb->dev->dev; |
| struct snd_usb_caiaqdev *cdev = urb->context; |
| unsigned char *buf = urb->transfer_buffer; |
| |
| if (urb->status || !cdev) { |
| dev_warn(dev, "received EP1 urb->status = %i\n", urb->status); |
| return; |
| } |
| |
| switch(buf[0]) { |
| case EP1_CMD_GET_DEVICE_INFO: |
| memcpy(&cdev->spec, buf+1, sizeof(struct caiaq_device_spec)); |
| cdev->spec.fw_version = le16_to_cpu(cdev->spec.fw_version); |
| dev_dbg(dev, "device spec (firmware %d): audio: %d in, %d out, " |
| "MIDI: %d in, %d out, data alignment %d\n", |
| cdev->spec.fw_version, |
| cdev->spec.num_analog_audio_in, |
| cdev->spec.num_analog_audio_out, |
| cdev->spec.num_midi_in, |
| cdev->spec.num_midi_out, |
| cdev->spec.data_alignment); |
| |
| cdev->spec_received++; |
| wake_up(&cdev->ep1_wait_queue); |
| break; |
| case EP1_CMD_AUDIO_PARAMS: |
| cdev->audio_parm_answer = buf[1]; |
| wake_up(&cdev->ep1_wait_queue); |
| break; |
| case EP1_CMD_MIDI_READ: |
| snd_usb_caiaq_midi_handle_input(cdev, buf[1], buf + 3, buf[2]); |
| break; |
| case EP1_CMD_READ_IO: |
| if (cdev->chip.usb_id == |
| USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) { |
| if (urb->actual_length > sizeof(cdev->control_state)) |
| urb->actual_length = sizeof(cdev->control_state); |
| memcpy(cdev->control_state, buf + 1, urb->actual_length); |
| wake_up(&cdev->ep1_wait_queue); |
| break; |
| } |
| #ifdef CONFIG_SND_USB_CAIAQ_INPUT |
| fallthrough; |
| case EP1_CMD_READ_ERP: |
| case EP1_CMD_READ_ANALOG: |
| snd_usb_caiaq_input_dispatch(cdev, buf, urb->actual_length); |
| #endif |
| break; |
| } |
| |
| cdev->ep1_in_urb.actual_length = 0; |
| ret = usb_submit_urb(&cdev->ep1_in_urb, GFP_ATOMIC); |
| if (ret < 0) |
| dev_err(dev, "unable to submit urb. OOM!?\n"); |
| } |
| |
| int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *cdev, |
| unsigned char command, |
| const unsigned char *buffer, |
| int len) |
| { |
| int actual_len; |
| struct usb_device *usb_dev = cdev->chip.dev; |
| |
| if (!usb_dev) |
| return -EIO; |
| |
| if (len > EP1_BUFSIZE - 1) |
| len = EP1_BUFSIZE - 1; |
| |
| if (buffer && len > 0) |
| memcpy(cdev->ep1_out_buf+1, buffer, len); |
| |
| cdev->ep1_out_buf[0] = command; |
| return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1), |
| cdev->ep1_out_buf, len+1, &actual_len, 200); |
| } |
| |
| int snd_usb_caiaq_send_command_bank(struct snd_usb_caiaqdev *cdev, |
| unsigned char command, |
| unsigned char bank, |
| const unsigned char *buffer, |
| int len) |
| { |
| int actual_len; |
| struct usb_device *usb_dev = cdev->chip.dev; |
| |
| if (!usb_dev) |
| return -EIO; |
| |
| if (len > EP1_BUFSIZE - 2) |
| len = EP1_BUFSIZE - 2; |
| |
| if (buffer && len > 0) |
| memcpy(cdev->ep1_out_buf+2, buffer, len); |
| |
| cdev->ep1_out_buf[0] = command; |
| cdev->ep1_out_buf[1] = bank; |
| |
| return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1), |
| cdev->ep1_out_buf, len+2, &actual_len, 200); |
| } |
| |
| int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *cdev, |
| int rate, int depth, int bpp) |
| { |
| int ret; |
| char tmp[5]; |
| struct device *dev = caiaqdev_to_dev(cdev); |
| |
| switch (rate) { |
| case 44100: tmp[0] = SAMPLERATE_44100; break; |
| case 48000: tmp[0] = SAMPLERATE_48000; break; |
| case 88200: tmp[0] = SAMPLERATE_88200; break; |
| case 96000: tmp[0] = SAMPLERATE_96000; break; |
| case 192000: tmp[0] = SAMPLERATE_192000; break; |
| default: return -EINVAL; |
| } |
| |
| switch (depth) { |
| case 16: tmp[1] = DEPTH_16; break; |
| case 24: tmp[1] = DEPTH_24; break; |
| default: return -EINVAL; |
| } |
| |
| tmp[2] = bpp & 0xff; |
| tmp[3] = bpp >> 8; |
| tmp[4] = 1; /* packets per microframe */ |
| |
| dev_dbg(dev, "setting audio params: %d Hz, %d bits, %d bpp\n", |
| rate, depth, bpp); |
| |
| cdev->audio_parm_answer = -1; |
| ret = snd_usb_caiaq_send_command(cdev, EP1_CMD_AUDIO_PARAMS, |
| tmp, sizeof(tmp)); |
| |
| if (ret) |
| return ret; |
| |
| if (!wait_event_timeout(cdev->ep1_wait_queue, |
| cdev->audio_parm_answer >= 0, HZ)) |
| return -EPIPE; |
| |
| if (cdev->audio_parm_answer != 1) |
| dev_dbg(dev, "unable to set the device's audio params\n"); |
| else |
| cdev->bpp = bpp; |
| |
| return cdev->audio_parm_answer == 1 ? 0 : -EINVAL; |
| } |
| |
| int snd_usb_caiaq_set_auto_msg(struct snd_usb_caiaqdev *cdev, |
| int digital, int analog, int erp) |
| { |
| char tmp[3] = { digital, analog, erp }; |
| return snd_usb_caiaq_send_command(cdev, EP1_CMD_AUTO_MSG, |
| tmp, sizeof(tmp)); |
| } |
| |
| static void setup_card(struct snd_usb_caiaqdev *cdev) |
| { |
| int ret; |
| char val[4]; |
| struct device *dev = caiaqdev_to_dev(cdev); |
| |
| /* device-specific startup specials */ |
| switch (cdev->chip.usb_id) { |
| case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): |
| /* RigKontrol2 - display centered dash ('-') */ |
| val[0] = 0x00; |
| val[1] = 0x00; |
| val[2] = 0x01; |
| snd_usb_caiaq_send_command(cdev, EP1_CMD_WRITE_IO, val, 3); |
| break; |
| case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): |
| /* RigKontrol2 - display two centered dashes ('--') */ |
| val[0] = 0x00; |
| val[1] = 0x40; |
| val[2] = 0x40; |
| val[3] = 0x00; |
| snd_usb_caiaq_send_command(cdev, EP1_CMD_WRITE_IO, val, 4); |
| break; |
| case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): |
| /* Audio Kontrol 1 - make USB-LED stop blinking */ |
| val[0] = 0x00; |
| snd_usb_caiaq_send_command(cdev, EP1_CMD_WRITE_IO, val, 1); |
| break; |
| case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ): |
| /* Audio 8 DJ - trigger read of current settings */ |
| cdev->control_state[0] = 0xff; |
| snd_usb_caiaq_set_auto_msg(cdev, 1, 0, 0); |
| snd_usb_caiaq_send_command(cdev, EP1_CMD_READ_IO, NULL, 0); |
| |
| if (!wait_event_timeout(cdev->ep1_wait_queue, |
| cdev->control_state[0] != 0xff, HZ)) |
| return; |
| |
| /* fix up some defaults */ |
| if ((cdev->control_state[1] != 2) || |
| (cdev->control_state[2] != 3) || |
| (cdev->control_state[4] != 2)) { |
| cdev->control_state[1] = 2; |
| cdev->control_state[2] = 3; |
| cdev->control_state[4] = 2; |
| snd_usb_caiaq_send_command(cdev, |
| EP1_CMD_WRITE_IO, cdev->control_state, 6); |
| } |
| |
| break; |
| } |
| |
| if (cdev->spec.num_analog_audio_out + |
| cdev->spec.num_analog_audio_in + |
| cdev->spec.num_digital_audio_out + |
| cdev->spec.num_digital_audio_in > 0) { |
| ret = snd_usb_caiaq_audio_init(cdev); |
| if (ret < 0) |
| dev_err(dev, "Unable to set up audio system (ret=%d)\n", ret); |
| } |
| |
| if (cdev->spec.num_midi_in + |
| cdev->spec.num_midi_out > 0) { |
| ret = snd_usb_caiaq_midi_init(cdev); |
| if (ret < 0) |
| dev_err(dev, "Unable to set up MIDI system (ret=%d)\n", ret); |
| } |
| |
| #ifdef CONFIG_SND_USB_CAIAQ_INPUT |
| ret = snd_usb_caiaq_input_init(cdev); |
| if (ret < 0) |
| dev_err(dev, "Unable to set up input system (ret=%d)\n", ret); |
| #endif |
| |
| /* finally, register the card and all its sub-instances */ |
| ret = snd_card_register(cdev->chip.card); |
| if (ret < 0) { |
| dev_err(dev, "snd_card_register() returned %d\n", ret); |
| snd_card_free(cdev->chip.card); |
| } |
| |
| ret = snd_usb_caiaq_control_init(cdev); |
| if (ret < 0) |
| dev_err(dev, "Unable to set up control system (ret=%d)\n", ret); |
| } |
| |
| static int create_card(struct usb_device *usb_dev, |
| struct usb_interface *intf, |
| struct snd_card **cardp) |
| { |
| int devnum; |
| int err; |
| struct snd_card *card; |
| struct snd_usb_caiaqdev *cdev; |
| |
| for (devnum = 0; devnum < SNDRV_CARDS; devnum++) |
| if (enable[devnum]) |
| break; |
| |
| if (devnum >= SNDRV_CARDS) |
| return -ENODEV; |
| |
| err = snd_card_new(&intf->dev, |
| index[devnum], id[devnum], THIS_MODULE, |
| sizeof(struct snd_usb_caiaqdev), &card); |
| if (err < 0) |
| return err; |
| |
| cdev = caiaqdev(card); |
| cdev->chip.dev = usb_dev; |
| cdev->chip.card = card; |
| cdev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor), |
| le16_to_cpu(usb_dev->descriptor.idProduct)); |
| spin_lock_init(&cdev->spinlock); |
| |
| *cardp = card; |
| return 0; |
| } |
| |
| static int init_card(struct snd_usb_caiaqdev *cdev) |
| { |
| char *c, usbpath[32]; |
| struct usb_device *usb_dev = cdev->chip.dev; |
| struct snd_card *card = cdev->chip.card; |
| struct device *dev = caiaqdev_to_dev(cdev); |
| int err, len; |
| |
| if (usb_set_interface(usb_dev, 0, 1) != 0) { |
| dev_err(dev, "can't set alt interface.\n"); |
| return -EIO; |
| } |
| |
| usb_init_urb(&cdev->ep1_in_urb); |
| usb_init_urb(&cdev->midi_out_urb); |
| |
| usb_fill_bulk_urb(&cdev->ep1_in_urb, usb_dev, |
| usb_rcvbulkpipe(usb_dev, 0x1), |
| cdev->ep1_in_buf, EP1_BUFSIZE, |
| usb_ep1_command_reply_dispatch, cdev); |
| |
| usb_fill_bulk_urb(&cdev->midi_out_urb, usb_dev, |
| usb_sndbulkpipe(usb_dev, 0x1), |
| cdev->midi_out_buf, EP1_BUFSIZE, |
| snd_usb_caiaq_midi_output_done, cdev); |
| |
| /* sanity checks of EPs before actually submitting */ |
| if (usb_urb_ep_type_check(&cdev->ep1_in_urb) || |
| usb_urb_ep_type_check(&cdev->midi_out_urb)) { |
| dev_err(dev, "invalid EPs\n"); |
| return -EINVAL; |
| } |
| |
| init_waitqueue_head(&cdev->ep1_wait_queue); |
| init_waitqueue_head(&cdev->prepare_wait_queue); |
| |
| if (usb_submit_urb(&cdev->ep1_in_urb, GFP_KERNEL) != 0) |
| return -EIO; |
| |
| err = snd_usb_caiaq_send_command(cdev, EP1_CMD_GET_DEVICE_INFO, NULL, 0); |
| if (err) |
| goto err_kill_urb; |
| |
| if (!wait_event_timeout(cdev->ep1_wait_queue, cdev->spec_received, HZ)) { |
| err = -ENODEV; |
| goto err_kill_urb; |
| } |
| |
| usb_string(usb_dev, usb_dev->descriptor.iManufacturer, |
| cdev->vendor_name, CAIAQ_USB_STR_LEN); |
| |
| usb_string(usb_dev, usb_dev->descriptor.iProduct, |
| cdev->product_name, CAIAQ_USB_STR_LEN); |
| |
| strlcpy(card->driver, MODNAME, sizeof(card->driver)); |
| strlcpy(card->shortname, cdev->product_name, sizeof(card->shortname)); |
| strlcpy(card->mixername, cdev->product_name, sizeof(card->mixername)); |
| |
| /* if the id was not passed as module option, fill it with a shortened |
| * version of the product string which does not contain any |
| * whitespaces */ |
| |
| if (*card->id == '\0') { |
| char id[sizeof(card->id)]; |
| |
| memset(id, 0, sizeof(id)); |
| |
| for (c = card->shortname, len = 0; |
| *c && len < sizeof(card->id); c++) |
| if (*c != ' ') |
| id[len++] = *c; |
| |
| snd_card_set_id(card, id); |
| } |
| |
| usb_make_path(usb_dev, usbpath, sizeof(usbpath)); |
| snprintf(card->longname, sizeof(card->longname), "%s %s (%s)", |
| cdev->vendor_name, cdev->product_name, usbpath); |
| |
| setup_card(cdev); |
| return 0; |
| |
| err_kill_urb: |
| usb_kill_urb(&cdev->ep1_in_urb); |
| return err; |
| } |
| |
| static int snd_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| int ret; |
| struct snd_card *card = NULL; |
| struct usb_device *usb_dev = interface_to_usbdev(intf); |
| |
| ret = create_card(usb_dev, intf, &card); |
| |
| if (ret < 0) |
| return ret; |
| |
| usb_set_intfdata(intf, card); |
| ret = init_card(caiaqdev(card)); |
| if (ret < 0) { |
| dev_err(&usb_dev->dev, "unable to init card! (ret=%d)\n", ret); |
| snd_card_free(card); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void snd_disconnect(struct usb_interface *intf) |
| { |
| struct snd_card *card = usb_get_intfdata(intf); |
| struct device *dev = intf->usb_dev; |
| struct snd_usb_caiaqdev *cdev; |
| |
| if (!card) |
| return; |
| |
| cdev = caiaqdev(card); |
| dev_dbg(dev, "%s(%p)\n", __func__, intf); |
| |
| snd_card_disconnect(card); |
| |
| #ifdef CONFIG_SND_USB_CAIAQ_INPUT |
| snd_usb_caiaq_input_free(cdev); |
| #endif |
| snd_usb_caiaq_audio_free(cdev); |
| |
| usb_kill_urb(&cdev->ep1_in_urb); |
| usb_kill_urb(&cdev->midi_out_urb); |
| |
| snd_card_free(card); |
| usb_reset_device(interface_to_usbdev(intf)); |
| } |
| |
| |
| MODULE_DEVICE_TABLE(usb, snd_usb_id_table); |
| static struct usb_driver snd_usb_driver = { |
| .name = MODNAME, |
| .probe = snd_probe, |
| .disconnect = snd_disconnect, |
| .id_table = snd_usb_id_table, |
| }; |
| |
| module_usb_driver(snd_usb_driver); |