| /* |
| * MPC8323E EMDS Device Tree Source |
| * |
| * Copyright 2006 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| / { |
| model = "MPC8323EMDS"; |
| compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8323@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <20>; // 32 bytes |
| i-cache-line-size = <20>; // 32 bytes |
| d-cache-size = <4000>; // L1, 16K |
| i-cache-size = <4000>; // L1, 16K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <00000000 08000000>; |
| }; |
| |
| bcsr@f8000000 { |
| device_type = "board-control"; |
| reg = <f8000000 8000>; |
| }; |
| |
| soc8323@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0 e0000000 00100000>; |
| reg = <e0000000 00000200>; |
| bus-frequency = <7DE2900>; |
| |
| wdt@200 { |
| device_type = "watchdog"; |
| compatible = "mpc83xx_wdt"; |
| reg = <200 100>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| device_type = "i2c"; |
| compatible = "fsl-i2c"; |
| reg = <3000 100>; |
| interrupts = <e 8>; |
| interrupt-parent = < &ipic >; |
| dfsrr; |
| |
| rtc@68 { |
| compatible = "dallas,ds1374"; |
| reg = <68>; |
| }; |
| }; |
| |
| serial@4500 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4500 100>; |
| clock-frequency = <0>; |
| interrupts = <9 8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| serial@4600 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4600 100>; |
| clock-frequency = <0>; |
| interrupts = <a 8>; |
| interrupt-parent = < &ipic >; |
| }; |
| |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "talitos"; |
| reg = <30000 7000>; |
| interrupts = <b 8>; |
| interrupt-parent = < &ipic >; |
| /* Rev. 2.2 */ |
| num-channels = <1>; |
| channel-fifo-len = <18>; |
| exec-units-mask = <0000004c>; |
| descriptor-types-mask = <0122003f>; |
| }; |
| |
| ipic: pic@700 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <700 100>; |
| device_type = "ipic"; |
| }; |
| |
| par_io@1400 { |
| reg = <1400 100>; |
| device_type = "par_io"; |
| num-ports = <7>; |
| |
| pio3: ucc_pin@03 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 3 4 3 0 2 0 /* MDIO */ |
| 3 5 1 0 2 0 /* MDC */ |
| 0 d 2 0 1 0 /* RX_CLK (CLK9) */ |
| 3 18 2 0 1 0 /* TX_CLK (CLK10) */ |
| 1 0 1 0 1 0 /* TxD0 */ |
| 1 1 1 0 1 0 /* TxD1 */ |
| 1 2 1 0 1 0 /* TxD2 */ |
| 1 3 1 0 1 0 /* TxD3 */ |
| 1 4 2 0 1 0 /* RxD0 */ |
| 1 5 2 0 1 0 /* RxD1 */ |
| 1 6 2 0 1 0 /* RxD2 */ |
| 1 7 2 0 1 0 /* RxD3 */ |
| 1 8 2 0 1 0 /* RX_ER */ |
| 1 9 1 0 1 0 /* TX_ER */ |
| 1 a 2 0 1 0 /* RX_DV */ |
| 1 b 2 0 1 0 /* COL */ |
| 1 c 1 0 1 0 /* TX_EN */ |
| 1 d 2 0 1 0>;/* CRS */ |
| }; |
| pio4: ucc_pin@04 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 3 1f 2 0 1 0 /* RX_CLK (CLK7) */ |
| 3 6 2 0 1 0 /* TX_CLK (CLK8) */ |
| 1 12 1 0 1 0 /* TxD0 */ |
| 1 13 1 0 1 0 /* TxD1 */ |
| 1 14 1 0 1 0 /* TxD2 */ |
| 1 15 1 0 1 0 /* TxD3 */ |
| 1 16 2 0 1 0 /* RxD0 */ |
| 1 17 2 0 1 0 /* RxD1 */ |
| 1 18 2 0 1 0 /* RxD2 */ |
| 1 19 2 0 1 0 /* RxD3 */ |
| 1 1a 2 0 1 0 /* RX_ER */ |
| 1 1b 1 0 1 0 /* TX_ER */ |
| 1 1c 2 0 1 0 /* RX_DV */ |
| 1 1d 2 0 1 0 /* COL */ |
| 1 1e 1 0 1 0 /* TX_EN */ |
| 1 1f 2 0 1 0>;/* CRS */ |
| }; |
| }; |
| }; |
| |
| qe@e0100000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "qe"; |
| model = "QE"; |
| ranges = <0 e0100000 00100000>; |
| reg = <e0100000 480>; |
| brg-frequency = <0>; |
| bus-frequency = <BCD3D80>; |
| |
| muram@10000 { |
| device_type = "muram"; |
| ranges = <0 00010000 00004000>; |
| |
| data-only@0 { |
| reg = <0 4000>; |
| }; |
| }; |
| |
| spi@4c0 { |
| device_type = "spi"; |
| compatible = "fsl_spi"; |
| reg = <4c0 40>; |
| interrupts = <2>; |
| interrupt-parent = < &qeic >; |
| mode = "cpu"; |
| }; |
| |
| spi@500 { |
| device_type = "spi"; |
| compatible = "fsl_spi"; |
| reg = <500 40>; |
| interrupts = <1>; |
| interrupt-parent = < &qeic >; |
| mode = "cpu"; |
| }; |
| |
| usb@6c0 { |
| device_type = "usb"; |
| compatible = "qe_udc"; |
| reg = <6c0 40 8B00 100>; |
| interrupts = <b>; |
| interrupt-parent = < &qeic >; |
| mode = "slave"; |
| }; |
| |
| ucc@2200 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| model = "UCC"; |
| device-id = <3>; |
| reg = <2200 200>; |
| interrupts = <22>; |
| interrupt-parent = < &qeic >; |
| /* |
| * mac-address is deprecated and will be removed |
| * in 2.6.25. Only recent versions of |
| * U-Boot support local-mac-address, however. |
| */ |
| mac-address = [ 00 00 00 00 00 00 ]; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock = <19>; |
| tx-clock = <1a>; |
| phy-handle = < &phy3 >; |
| pio-handle = < &pio3 >; |
| }; |
| |
| ucc@3200 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| model = "UCC"; |
| device-id = <4>; |
| reg = <3200 200>; |
| interrupts = <23>; |
| interrupt-parent = < &qeic >; |
| /* |
| * mac-address is deprecated and will be removed |
| * in 2.6.25. Only recent versions of |
| * U-Boot support local-mac-address, however. |
| */ |
| mac-address = [ 00 00 00 00 00 00 ]; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock = <17>; |
| tx-clock = <18>; |
| phy-handle = < &phy4 >; |
| pio-handle = < &pio4 >; |
| }; |
| |
| mdio@2320 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2320 18>; |
| device_type = "mdio"; |
| compatible = "ucc_geth_phy"; |
| |
| phy3: ethernet-phy@03 { |
| interrupt-parent = < &ipic >; |
| interrupts = <11 8>; |
| reg = <3>; |
| device_type = "ethernet-phy"; |
| }; |
| phy4: ethernet-phy@04 { |
| interrupt-parent = < &ipic >; |
| interrupts = <12 8>; |
| reg = <4>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| qeic: qeic@80 { |
| interrupt-controller; |
| device_type = "qeic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <80 80>; |
| big-endian; |
| interrupts = <20 8 21 8>; //high:32 low:33 |
| interrupt-parent = < &ipic >; |
| }; |
| }; |
| |
| pci@e0008500 { |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x11 AD17 */ |
| 8800 0 0 1 &ipic 14 8 |
| 8800 0 0 2 &ipic 15 8 |
| 8800 0 0 3 &ipic 16 8 |
| 8800 0 0 4 &ipic 17 8 |
| |
| /* IDSEL 0x12 AD18 */ |
| 9000 0 0 1 &ipic 16 8 |
| 9000 0 0 2 &ipic 17 8 |
| 9000 0 0 3 &ipic 14 8 |
| 9000 0 0 4 &ipic 15 8 |
| |
| /* IDSEL 0x13 AD19 */ |
| 9800 0 0 1 &ipic 17 8 |
| 9800 0 0 2 &ipic 14 8 |
| 9800 0 0 3 &ipic 15 8 |
| 9800 0 0 4 &ipic 16 8 |
| |
| /* IDSEL 0x15 AD21*/ |
| a800 0 0 1 &ipic 14 8 |
| a800 0 0 2 &ipic 15 8 |
| a800 0 0 3 &ipic 16 8 |
| a800 0 0 4 &ipic 17 8 |
| |
| /* IDSEL 0x16 AD22*/ |
| b000 0 0 1 &ipic 17 8 |
| b000 0 0 2 &ipic 14 8 |
| b000 0 0 3 &ipic 15 8 |
| b000 0 0 4 &ipic 16 8 |
| |
| /* IDSEL 0x17 AD23*/ |
| b800 0 0 1 &ipic 16 8 |
| b800 0 0 2 &ipic 17 8 |
| b800 0 0 3 &ipic 14 8 |
| b800 0 0 4 &ipic 15 8 |
| |
| /* IDSEL 0x18 AD24*/ |
| c000 0 0 1 &ipic 15 8 |
| c000 0 0 2 &ipic 16 8 |
| c000 0 0 3 &ipic 17 8 |
| c000 0 0 4 &ipic 14 8>; |
| interrupt-parent = < &ipic >; |
| interrupts = <42 8>; |
| bus-range = <0 0>; |
| ranges = <02000000 0 90000000 90000000 0 10000000 |
| 42000000 0 80000000 80000000 0 10000000 |
| 01000000 0 00000000 d0000000 0 00100000>; |
| clock-frequency = <0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <e0008500 100>; |
| compatible = "fsl,mpc8349-pci"; |
| device_type = "pci"; |
| }; |
| }; |