| Monolithic Power Systems MP8867/MP8869 voltage regulator |
| |
| Required properties: |
| - compatible: Must be one of the following. |
| "mps,mp8867" |
| "mps,mp8869" |
| - reg: I2C slave address. |
| - enable-gpios: enable gpios. |
| - mps,fb-voltage-divider: An array of two integers containing the resistor |
| values R1 and R2 of the feedback voltage divider in kilo ohms. |
| |
| Any property defined as part of the core regulator binding, defined in |
| ./regulator.txt, can also be used. |
| |
| Example: |
| |
| vcpu: regulator@62 { |
| compatible = "mps,mp8869"; |
| regulator-name = "vcpu"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <850000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-gpios = <&porta 1 GPIO_ACTIVE_LOW>; |
| mps,fb-voltage-divider = <80 240>; |
| reg = <0x62>; |
| }; |
