| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/etherdevice.h> |
| #include <linux/module.h> |
| #include <linux/inetdevice.h> |
| #include <net/cfg80211.h> |
| #include <net/rtnetlink.h> |
| #include <net/addrconf.h> |
| #include <net/ieee80211_radiotap.h> |
| #include <net/ipv6.h> |
| #include <brcmu_utils.h> |
| #include <brcmu_wifi.h> |
| |
| #include "core.h" |
| #include "bus.h" |
| #include "debug.h" |
| #include "fwil_types.h" |
| #include "p2p.h" |
| #include "pno.h" |
| #include "cfg80211.h" |
| #include "fwil.h" |
| #include "feature.h" |
| #include "proto.h" |
| #include "pcie.h" |
| #include "common.h" |
| |
| #define MAX_WAIT_FOR_8021X_TX msecs_to_jiffies(950) |
| |
| #define BRCMF_BSSIDX_INVALID -1 |
| |
| #define RXS_PBPRES BIT(2) |
| |
| #define D11_PHY_HDR_LEN 6 |
| |
| struct d11rxhdr_le { |
| __le16 RxFrameSize; |
| u16 PAD; |
| __le16 PhyRxStatus_0; |
| __le16 PhyRxStatus_1; |
| __le16 PhyRxStatus_2; |
| __le16 PhyRxStatus_3; |
| __le16 PhyRxStatus_4; |
| __le16 PhyRxStatus_5; |
| __le16 RxStatus1; |
| __le16 RxStatus2; |
| __le16 RxTSFTime; |
| __le16 RxChan; |
| u8 unknown[12]; |
| } __packed; |
| |
| struct wlc_d11rxhdr { |
| struct d11rxhdr_le rxhdr; |
| __le32 tsf_l; |
| s8 rssi; |
| s8 rxpwr0; |
| s8 rxpwr1; |
| s8 do_rssi_ma; |
| s8 rxpwr[4]; |
| } __packed; |
| |
| char *brcmf_ifname(struct brcmf_if *ifp) |
| { |
| if (!ifp) |
| return "<if_null>"; |
| |
| if (ifp->ndev) |
| return ifp->ndev->name; |
| |
| return "<if_none>"; |
| } |
| |
| struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx) |
| { |
| struct brcmf_if *ifp; |
| s32 bsscfgidx; |
| |
| if (ifidx < 0 || ifidx >= BRCMF_MAX_IFS) { |
| bphy_err(drvr, "ifidx %d out of range\n", ifidx); |
| return NULL; |
| } |
| |
| ifp = NULL; |
| bsscfgidx = drvr->if2bss[ifidx]; |
| if (bsscfgidx >= 0) |
| ifp = drvr->iflist[bsscfgidx]; |
| |
| return ifp; |
| } |
| |
| void brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable) |
| { |
| s32 err; |
| u32 mode; |
| |
| if (enable) |
| mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY; |
| else |
| mode = 0; |
| |
| /* Try to set and enable ARP offload feature, this may fail, then it */ |
| /* is simply not supported and err 0 will be returned */ |
| err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode); |
| if (err) { |
| brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", |
| mode, err); |
| } else { |
| err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable); |
| if (err) { |
| brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n", |
| enable, err); |
| } else { |
| brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n", |
| enable, mode); |
| } |
| } |
| |
| err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable); |
| if (err) { |
| brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n", |
| enable, err); |
| } else { |
| brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n", |
| enable, mode); |
| } |
| } |
| |
| static void _brcmf_set_multicast_list(struct work_struct *work) |
| { |
| struct brcmf_if *ifp = container_of(work, struct brcmf_if, |
| multicast_work); |
| struct brcmf_pub *drvr = ifp->drvr; |
| struct net_device *ndev; |
| struct netdev_hw_addr *ha; |
| u32 cmd_value, cnt; |
| __le32 cnt_le; |
| char *buf, *bufp; |
| u32 buflen; |
| s32 err; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); |
| |
| ndev = ifp->ndev; |
| |
| /* Determine initial value of allmulti flag */ |
| cmd_value = (ndev->flags & IFF_ALLMULTI) ? true : false; |
| |
| /* Send down the multicast list first. */ |
| cnt = netdev_mc_count(ndev); |
| buflen = sizeof(cnt) + (cnt * ETH_ALEN); |
| buf = kmalloc(buflen, GFP_ATOMIC); |
| if (!buf) |
| return; |
| bufp = buf; |
| |
| cnt_le = cpu_to_le32(cnt); |
| memcpy(bufp, &cnt_le, sizeof(cnt_le)); |
| bufp += sizeof(cnt_le); |
| |
| netdev_for_each_mc_addr(ha, ndev) { |
| if (!cnt) |
| break; |
| memcpy(bufp, ha->addr, ETH_ALEN); |
| bufp += ETH_ALEN; |
| cnt--; |
| } |
| |
| err = brcmf_fil_iovar_data_set(ifp, "mcast_list", buf, buflen); |
| if (err < 0) { |
| bphy_err(drvr, "Setting mcast_list failed, %d\n", err); |
| cmd_value = cnt ? true : cmd_value; |
| } |
| |
| kfree(buf); |
| |
| /* |
| * Now send the allmulti setting. This is based on the setting in the |
| * net_device flags, but might be modified above to be turned on if we |
| * were trying to set some addresses and dongle rejected it... |
| */ |
| err = brcmf_fil_iovar_int_set(ifp, "allmulti", cmd_value); |
| if (err < 0) |
| bphy_err(drvr, "Setting allmulti failed, %d\n", err); |
| |
| /*Finally, pick up the PROMISC flag */ |
| cmd_value = (ndev->flags & IFF_PROMISC) ? true : false; |
| err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PROMISC, cmd_value); |
| if (err < 0) |
| bphy_err(drvr, "Setting BRCMF_C_SET_PROMISC failed, %d\n", |
| err); |
| brcmf_configure_arp_nd_offload(ifp, !cmd_value); |
| } |
| |
| #if IS_ENABLED(CONFIG_IPV6) |
| static void _brcmf_update_ndtable(struct work_struct *work) |
| { |
| struct brcmf_if *ifp = container_of(work, struct brcmf_if, |
| ndoffload_work); |
| struct brcmf_pub *drvr = ifp->drvr; |
| int i, ret; |
| |
| /* clear the table in firmware */ |
| ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip_clear", NULL, 0); |
| if (ret) { |
| brcmf_dbg(TRACE, "fail to clear nd ip table err:%d\n", ret); |
| return; |
| } |
| |
| for (i = 0; i < ifp->ipv6addr_idx; i++) { |
| ret = brcmf_fil_iovar_data_set(ifp, "nd_hostip", |
| &ifp->ipv6_addr_tbl[i], |
| sizeof(struct in6_addr)); |
| if (ret) |
| bphy_err(drvr, "add nd ip err %d\n", ret); |
| } |
| } |
| #else |
| static void _brcmf_update_ndtable(struct work_struct *work) |
| { |
| } |
| #endif |
| |
| static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr) |
| { |
| struct brcmf_if *ifp = netdev_priv(ndev); |
| struct sockaddr *sa = (struct sockaddr *)addr; |
| struct brcmf_pub *drvr = ifp->drvr; |
| int err; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); |
| |
| err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", sa->sa_data, |
| ETH_ALEN); |
| if (err < 0) { |
| bphy_err(drvr, "Setting cur_etheraddr failed, %d\n", err); |
| } else { |
| brcmf_dbg(TRACE, "updated to %pM\n", sa->sa_data); |
| memcpy(ifp->mac_addr, sa->sa_data, ETH_ALEN); |
| memcpy(ifp->ndev->dev_addr, ifp->mac_addr, ETH_ALEN); |
| } |
| return err; |
| } |
| |
| static void brcmf_netdev_set_multicast_list(struct net_device *ndev) |
| { |
| struct brcmf_if *ifp = netdev_priv(ndev); |
| |
| schedule_work(&ifp->multicast_work); |
| } |
| |
| /** |
| * brcmf_skb_is_iapp - checks if skb is an IAPP packet |
| * |
| * @skb: skb to check |
| */ |
| static bool brcmf_skb_is_iapp(struct sk_buff *skb) |
| { |
| static const u8 iapp_l2_update_packet[6] __aligned(2) = { |
| 0x00, 0x01, 0xaf, 0x81, 0x01, 0x00, |
| }; |
| unsigned char *eth_data; |
| #if !defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) |
| const u16 *a, *b; |
| #endif |
| |
| if (skb->len - skb->mac_len != 6 || |
| !is_multicast_ether_addr(eth_hdr(skb)->h_dest)) |
| return false; |
| |
| eth_data = skb_mac_header(skb) + ETH_HLEN; |
| #if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) |
| return !(((*(const u32 *)eth_data) ^ (*(const u32 *)iapp_l2_update_packet)) | |
| ((*(const u16 *)(eth_data + 4)) ^ (*(const u16 *)(iapp_l2_update_packet + 4)))); |
| #else |
| a = (const u16 *)eth_data; |
| b = (const u16 *)iapp_l2_update_packet; |
| |
| return !((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])); |
| #endif |
| } |
| |
| static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, |
| struct net_device *ndev) |
| { |
| int ret; |
| struct brcmf_if *ifp = netdev_priv(ndev); |
| struct brcmf_pub *drvr = ifp->drvr; |
| struct ethhdr *eh; |
| int head_delta; |
| |
| brcmf_dbg(DATA, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); |
| |
| /* Can the device send data? */ |
| if (drvr->bus_if->state != BRCMF_BUS_UP) { |
| bphy_err(drvr, "xmit rejected state=%d\n", drvr->bus_if->state); |
| netif_stop_queue(ndev); |
| dev_kfree_skb(skb); |
| ret = -ENODEV; |
| goto done; |
| } |
| |
| /* Some recent Broadcom's firmwares disassociate STA when they receive |
| * an 802.11f ADD frame. This behavior can lead to a local DoS security |
| * issue. Attacker may trigger disassociation of any STA by sending a |
| * proper Ethernet frame to the wireless interface. |
| * |
| * Moreover this feature may break AP interfaces in some specific |
| * setups. This applies e.g. to the bridge with hairpin mode enabled and |
| * IFLA_BRPORT_MCAST_TO_UCAST set. IAPP packet generated by a firmware |
| * will get passed back to the wireless interface and cause immediate |
| * disassociation of a just-connected STA. |
| */ |
| if (!drvr->settings->iapp && brcmf_skb_is_iapp(skb)) { |
| dev_kfree_skb(skb); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| /* Make sure there's enough writeable headroom */ |
| if (skb_headroom(skb) < drvr->hdrlen || skb_header_cloned(skb)) { |
| head_delta = max_t(int, drvr->hdrlen - skb_headroom(skb), 0); |
| |
| brcmf_dbg(INFO, "%s: insufficient headroom (%d)\n", |
| brcmf_ifname(ifp), head_delta); |
| atomic_inc(&drvr->bus_if->stats.pktcowed); |
| ret = pskb_expand_head(skb, ALIGN(head_delta, NET_SKB_PAD), 0, |
| GFP_ATOMIC); |
| if (ret < 0) { |
| bphy_err(drvr, "%s: failed to expand headroom\n", |
| brcmf_ifname(ifp)); |
| atomic_inc(&drvr->bus_if->stats.pktcow_failed); |
| goto done; |
| } |
| } |
| |
| /* validate length for ether packet */ |
| if (skb->len < sizeof(*eh)) { |
| ret = -EINVAL; |
| dev_kfree_skb(skb); |
| goto done; |
| } |
| |
| eh = (struct ethhdr *)(skb->data); |
| |
| if (eh->h_proto == htons(ETH_P_PAE)) |
| atomic_inc(&ifp->pend_8021x_cnt); |
| |
| /* determine the priority */ |
| if ((skb->priority == 0) || (skb->priority > 7)) |
| skb->priority = cfg80211_classify8021d(skb, NULL); |
| |
| ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb); |
| if (ret < 0) |
| brcmf_txfinalize(ifp, skb, false); |
| |
| done: |
| if (ret) { |
| ndev->stats.tx_dropped++; |
| } else { |
| ndev->stats.tx_packets++; |
| ndev->stats.tx_bytes += skb->len; |
| } |
| |
| /* Return ok: we always eat the packet */ |
| return NETDEV_TX_OK; |
| } |
| |
| void brcmf_txflowblock_if(struct brcmf_if *ifp, |
| enum brcmf_netif_stop_reason reason, bool state) |
| { |
| unsigned long flags; |
| |
| if (!ifp || !ifp->ndev) |
| return; |
| |
| brcmf_dbg(TRACE, "enter: bsscfgidx=%d stop=0x%X reason=%d state=%d\n", |
| ifp->bsscfgidx, ifp->netif_stop, reason, state); |
| |
| spin_lock_irqsave(&ifp->netif_stop_lock, flags); |
| if (state) { |
| if (!ifp->netif_stop) |
| netif_stop_queue(ifp->ndev); |
| ifp->netif_stop |= reason; |
| } else { |
| ifp->netif_stop &= ~reason; |
| if (!ifp->netif_stop) |
| netif_wake_queue(ifp->ndev); |
| } |
| spin_unlock_irqrestore(&ifp->netif_stop_lock, flags); |
| } |
| |
| void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) |
| { |
| /* Most of Broadcom's firmwares send 802.11f ADD frame every time a new |
| * STA connects to the AP interface. This is an obsoleted standard most |
| * users don't use, so don't pass these frames up unless requested. |
| */ |
| if (!ifp->drvr->settings->iapp && brcmf_skb_is_iapp(skb)) { |
| brcmu_pkt_buf_free_skb(skb); |
| return; |
| } |
| |
| if (skb->pkt_type == PACKET_MULTICAST) |
| ifp->ndev->stats.multicast++; |
| |
| if (!(ifp->ndev->flags & IFF_UP)) { |
| brcmu_pkt_buf_free_skb(skb); |
| return; |
| } |
| |
| ifp->ndev->stats.rx_bytes += skb->len; |
| ifp->ndev->stats.rx_packets++; |
| |
| brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol)); |
| if (in_interrupt()) |
| netif_rx(skb); |
| else |
| /* If the receive is not processed inside an ISR, |
| * the softirqd must be woken explicitly to service |
| * the NET_RX_SOFTIRQ. This is handled by netif_rx_ni(). |
| */ |
| netif_rx_ni(skb); |
| } |
| |
| void brcmf_netif_mon_rx(struct brcmf_if *ifp, struct sk_buff *skb) |
| { |
| if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_RADIOTAP)) { |
| /* Do nothing */ |
| } else if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_MONITOR_FMT_HW_RX_HDR)) { |
| struct wlc_d11rxhdr *wlc_rxhdr = (struct wlc_d11rxhdr *)skb->data; |
| struct ieee80211_radiotap_header *radiotap; |
| unsigned int offset; |
| u16 RxStatus1; |
| |
| RxStatus1 = le16_to_cpu(wlc_rxhdr->rxhdr.RxStatus1); |
| |
| offset = sizeof(struct wlc_d11rxhdr); |
| /* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU |
| * subframes |
| */ |
| if (RxStatus1 & RXS_PBPRES) |
| offset += 2; |
| offset += D11_PHY_HDR_LEN; |
| |
| skb_pull(skb, offset); |
| |
| /* TODO: use RX header to fill some radiotap data */ |
| radiotap = skb_push(skb, sizeof(*radiotap)); |
| memset(radiotap, 0, sizeof(*radiotap)); |
| radiotap->it_len = cpu_to_le16(sizeof(*radiotap)); |
| |
| /* TODO: 4 bytes with receive status? */ |
| skb->len -= 4; |
| } else { |
| struct ieee80211_radiotap_header *radiotap; |
| |
| /* TODO: use RX status to fill some radiotap data */ |
| radiotap = skb_push(skb, sizeof(*radiotap)); |
| memset(radiotap, 0, sizeof(*radiotap)); |
| radiotap->it_len = cpu_to_le16(sizeof(*radiotap)); |
| |
| /* TODO: 4 bytes with receive status? */ |
| skb->len -= 4; |
| } |
| |
| skb->dev = ifp->ndev; |
| skb_reset_mac_header(skb); |
| skb->pkt_type = PACKET_OTHERHOST; |
| skb->protocol = htons(ETH_P_802_2); |
| |
| brcmf_netif_rx(ifp, skb); |
| } |
| |
| static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb, |
| struct brcmf_if **ifp) |
| { |
| int ret; |
| |
| /* process and remove protocol-specific header */ |
| ret = brcmf_proto_hdrpull(drvr, true, skb, ifp); |
| |
| if (ret || !(*ifp) || !(*ifp)->ndev) { |
| if (ret != -ENODATA && *ifp) |
| (*ifp)->ndev->stats.rx_errors++; |
| brcmu_pkt_buf_free_skb(skb); |
| return -ENODATA; |
| } |
| |
| skb->protocol = eth_type_trans(skb, (*ifp)->ndev); |
| return 0; |
| } |
| |
| void brcmf_rx_frame(struct device *dev, struct sk_buff *skb, bool handle_event) |
| { |
| struct brcmf_if *ifp; |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_pub *drvr = bus_if->drvr; |
| |
| brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb); |
| |
| if (brcmf_rx_hdrpull(drvr, skb, &ifp)) |
| return; |
| |
| if (brcmf_proto_is_reorder_skb(skb)) { |
| brcmf_proto_rxreorder(ifp, skb); |
| } else { |
| /* Process special event packets */ |
| if (handle_event) |
| brcmf_fweh_process_skb(ifp->drvr, skb, |
| BCMILCP_SUBTYPE_VENDOR_LONG); |
| |
| brcmf_netif_rx(ifp, skb); |
| } |
| } |
| |
| void brcmf_rx_event(struct device *dev, struct sk_buff *skb) |
| { |
| struct brcmf_if *ifp; |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_pub *drvr = bus_if->drvr; |
| |
| brcmf_dbg(EVENT, "Enter: %s: rxp=%p\n", dev_name(dev), skb); |
| |
| if (brcmf_rx_hdrpull(drvr, skb, &ifp)) |
| return; |
| |
| brcmf_fweh_process_skb(ifp->drvr, skb, 0); |
| brcmu_pkt_buf_free_skb(skb); |
| } |
| |
| void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success) |
| { |
| struct ethhdr *eh; |
| u16 type; |
| |
| eh = (struct ethhdr *)(txp->data); |
| type = ntohs(eh->h_proto); |
| |
| if (type == ETH_P_PAE) { |
| atomic_dec(&ifp->pend_8021x_cnt); |
| if (waitqueue_active(&ifp->pend_8021x_wait)) |
| wake_up(&ifp->pend_8021x_wait); |
| } |
| |
| if (!success) |
| ifp->ndev->stats.tx_errors++; |
| |
| brcmu_pkt_buf_free_skb(txp); |
| } |
| |
| static void brcmf_ethtool_get_drvinfo(struct net_device *ndev, |
| struct ethtool_drvinfo *info) |
| { |
| struct brcmf_if *ifp = netdev_priv(ndev); |
| struct brcmf_pub *drvr = ifp->drvr; |
| char drev[BRCMU_DOTREV_LEN] = "n/a"; |
| |
| if (drvr->revinfo.result == 0) |
| brcmu_dotrev_str(drvr->revinfo.driverrev, drev); |
| strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); |
| strlcpy(info->version, drev, sizeof(info->version)); |
| strlcpy(info->fw_version, drvr->fwver, sizeof(info->fw_version)); |
| strlcpy(info->bus_info, dev_name(drvr->bus_if->dev), |
| sizeof(info->bus_info)); |
| } |
| |
| static const struct ethtool_ops brcmf_ethtool_ops = { |
| .get_drvinfo = brcmf_ethtool_get_drvinfo, |
| }; |
| |
| static int brcmf_netdev_stop(struct net_device *ndev) |
| { |
| struct brcmf_if *ifp = netdev_priv(ndev); |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); |
| |
| brcmf_cfg80211_down(ndev); |
| |
| brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear", NULL, 0); |
| |
| brcmf_net_setcarrier(ifp, false); |
| |
| return 0; |
| } |
| |
| static int brcmf_netdev_open(struct net_device *ndev) |
| { |
| struct brcmf_if *ifp = netdev_priv(ndev); |
| struct brcmf_pub *drvr = ifp->drvr; |
| struct brcmf_bus *bus_if = drvr->bus_if; |
| u32 toe_ol; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); |
| |
| /* If bus is not ready, can't continue */ |
| if (bus_if->state != BRCMF_BUS_UP) { |
| bphy_err(drvr, "failed bus is not ready\n"); |
| return -EAGAIN; |
| } |
| |
| atomic_set(&ifp->pend_8021x_cnt, 0); |
| |
| /* Get current TOE mode from dongle */ |
| if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 |
| && (toe_ol & TOE_TX_CSUM_OL) != 0) |
| ndev->features |= NETIF_F_IP_CSUM; |
| else |
| ndev->features &= ~NETIF_F_IP_CSUM; |
| |
| if (brcmf_cfg80211_up(ndev)) { |
| bphy_err(drvr, "failed to bring up cfg80211\n"); |
| return -EIO; |
| } |
| |
| /* Clear, carrier, set when connected or AP mode. */ |
| netif_carrier_off(ndev); |
| return 0; |
| } |
| |
| static const struct net_device_ops brcmf_netdev_ops_pri = { |
| .ndo_open = brcmf_netdev_open, |
| .ndo_stop = brcmf_netdev_stop, |
| .ndo_start_xmit = brcmf_netdev_start_xmit, |
| .ndo_set_mac_address = brcmf_netdev_set_mac_address, |
| .ndo_set_rx_mode = brcmf_netdev_set_multicast_list |
| }; |
| |
| int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) |
| { |
| struct brcmf_pub *drvr = ifp->drvr; |
| struct net_device *ndev; |
| s32 err; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx, |
| ifp->mac_addr); |
| ndev = ifp->ndev; |
| |
| /* set appropriate operations */ |
| ndev->netdev_ops = &brcmf_netdev_ops_pri; |
| |
| ndev->needed_headroom += drvr->hdrlen; |
| ndev->ethtool_ops = &brcmf_ethtool_ops; |
| |
| /* set the mac address & netns */ |
| memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN); |
| dev_net_set(ndev, wiphy_net(cfg_to_wiphy(drvr->config))); |
| |
| INIT_WORK(&ifp->multicast_work, _brcmf_set_multicast_list); |
| INIT_WORK(&ifp->ndoffload_work, _brcmf_update_ndtable); |
| |
| if (rtnl_locked) |
| err = register_netdevice(ndev); |
| else |
| err = register_netdev(ndev); |
| if (err != 0) { |
| bphy_err(drvr, "couldn't register the net device\n"); |
| goto fail; |
| } |
| |
| ndev->priv_destructor = brcmf_cfg80211_free_netdev; |
| brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); |
| return 0; |
| |
| fail: |
| drvr->iflist[ifp->bsscfgidx] = NULL; |
| ndev->netdev_ops = NULL; |
| return -EBADE; |
| } |
| |
| static void brcmf_net_detach(struct net_device *ndev, bool rtnl_locked) |
| { |
| if (ndev->reg_state == NETREG_REGISTERED) { |
| if (rtnl_locked) |
| unregister_netdevice(ndev); |
| else |
| unregister_netdev(ndev); |
| } else { |
| brcmf_cfg80211_free_netdev(ndev); |
| free_netdev(ndev); |
| } |
| } |
| |
| void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on) |
| { |
| struct net_device *ndev; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d carrier=%d\n", ifp->bsscfgidx, |
| on); |
| |
| ndev = ifp->ndev; |
| brcmf_txflowblock_if(ifp, BRCMF_NETIF_STOP_REASON_DISCONNECTED, !on); |
| if (on) { |
| if (!netif_carrier_ok(ndev)) |
| netif_carrier_on(ndev); |
| |
| } else { |
| if (netif_carrier_ok(ndev)) |
| netif_carrier_off(ndev); |
| } |
| } |
| |
| static int brcmf_net_p2p_open(struct net_device *ndev) |
| { |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| return brcmf_cfg80211_up(ndev); |
| } |
| |
| static int brcmf_net_p2p_stop(struct net_device *ndev) |
| { |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| return brcmf_cfg80211_down(ndev); |
| } |
| |
| static netdev_tx_t brcmf_net_p2p_start_xmit(struct sk_buff *skb, |
| struct net_device *ndev) |
| { |
| if (skb) |
| dev_kfree_skb_any(skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static const struct net_device_ops brcmf_netdev_ops_p2p = { |
| .ndo_open = brcmf_net_p2p_open, |
| .ndo_stop = brcmf_net_p2p_stop, |
| .ndo_start_xmit = brcmf_net_p2p_start_xmit |
| }; |
| |
| static int brcmf_net_p2p_attach(struct brcmf_if *ifp) |
| { |
| struct brcmf_pub *drvr = ifp->drvr; |
| struct net_device *ndev; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d mac=%pM\n", ifp->bsscfgidx, |
| ifp->mac_addr); |
| ndev = ifp->ndev; |
| |
| ndev->netdev_ops = &brcmf_netdev_ops_p2p; |
| |
| /* set the mac address */ |
| memcpy(ndev->dev_addr, ifp->mac_addr, ETH_ALEN); |
| |
| if (register_netdev(ndev) != 0) { |
| bphy_err(drvr, "couldn't register the p2p net device\n"); |
| goto fail; |
| } |
| |
| brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); |
| |
| return 0; |
| |
| fail: |
| ifp->drvr->iflist[ifp->bsscfgidx] = NULL; |
| ndev->netdev_ops = NULL; |
| return -EBADE; |
| } |
| |
| struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx, |
| bool is_p2pdev, const char *name, u8 *mac_addr) |
| { |
| struct brcmf_if *ifp; |
| struct net_device *ndev; |
| |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx, ifidx); |
| |
| ifp = drvr->iflist[bsscfgidx]; |
| /* |
| * Delete the existing interface before overwriting it |
| * in case we missed the BRCMF_E_IF_DEL event. |
| */ |
| if (ifp) { |
| if (ifidx) { |
| bphy_err(drvr, "ERROR: netdev:%s already exists\n", |
| ifp->ndev->name); |
| netif_stop_queue(ifp->ndev); |
| brcmf_net_detach(ifp->ndev, false); |
| drvr->iflist[bsscfgidx] = NULL; |
| } else { |
| brcmf_dbg(INFO, "netdev:%s ignore IF event\n", |
| ifp->ndev->name); |
| return ERR_PTR(-EINVAL); |
| } |
| } |
| |
| if (!drvr->settings->p2p_enable && is_p2pdev) { |
| /* this is P2P_DEVICE interface */ |
| brcmf_dbg(INFO, "allocate non-netdev interface\n"); |
| ifp = kzalloc(sizeof(*ifp), GFP_KERNEL); |
| if (!ifp) |
| return ERR_PTR(-ENOMEM); |
| } else { |
| brcmf_dbg(INFO, "allocate netdev interface\n"); |
| /* Allocate netdev, including space for private structure */ |
| ndev = alloc_netdev(sizeof(*ifp), is_p2pdev ? "p2p%d" : name, |
| NET_NAME_UNKNOWN, ether_setup); |
| if (!ndev) |
| return ERR_PTR(-ENOMEM); |
| |
| ndev->needs_free_netdev = true; |
| ifp = netdev_priv(ndev); |
| ifp->ndev = ndev; |
| /* store mapping ifidx to bsscfgidx */ |
| if (drvr->if2bss[ifidx] == BRCMF_BSSIDX_INVALID) |
| drvr->if2bss[ifidx] = bsscfgidx; |
| } |
| |
| ifp->drvr = drvr; |
| drvr->iflist[bsscfgidx] = ifp; |
| ifp->ifidx = ifidx; |
| ifp->bsscfgidx = bsscfgidx; |
| |
| init_waitqueue_head(&ifp->pend_8021x_wait); |
| spin_lock_init(&ifp->netif_stop_lock); |
| |
| if (mac_addr != NULL) |
| memcpy(ifp->mac_addr, mac_addr, ETH_ALEN); |
| |
| brcmf_dbg(TRACE, " ==== pid:%x, if:%s (%pM) created ===\n", |
| current->pid, name, ifp->mac_addr); |
| |
| return ifp; |
| } |
| |
| static void brcmf_del_if(struct brcmf_pub *drvr, s32 bsscfgidx, |
| bool rtnl_locked) |
| { |
| struct brcmf_if *ifp; |
| |
| ifp = drvr->iflist[bsscfgidx]; |
| drvr->iflist[bsscfgidx] = NULL; |
| if (!ifp) { |
| bphy_err(drvr, "Null interface, bsscfgidx=%d\n", bsscfgidx); |
| return; |
| } |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", bsscfgidx, |
| ifp->ifidx); |
| if (drvr->if2bss[ifp->ifidx] == bsscfgidx) |
| drvr->if2bss[ifp->ifidx] = BRCMF_BSSIDX_INVALID; |
| if (ifp->ndev) { |
| if (bsscfgidx == 0) { |
| if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { |
| rtnl_lock(); |
| brcmf_netdev_stop(ifp->ndev); |
| rtnl_unlock(); |
| } |
| } else { |
| netif_stop_queue(ifp->ndev); |
| } |
| |
| if (ifp->ndev->netdev_ops == &brcmf_netdev_ops_pri) { |
| cancel_work_sync(&ifp->multicast_work); |
| cancel_work_sync(&ifp->ndoffload_work); |
| } |
| brcmf_net_detach(ifp->ndev, rtnl_locked); |
| } else { |
| /* Only p2p device interfaces which get dynamically created |
| * end up here. In this case the p2p module should be informed |
| * about the removal of the interface within the firmware. If |
| * not then p2p commands towards the firmware will cause some |
| * serious troublesome side effects. The p2p module will clean |
| * up the ifp if needed. |
| */ |
| brcmf_p2p_ifp_removed(ifp, rtnl_locked); |
| kfree(ifp); |
| } |
| } |
| |
| void brcmf_remove_interface(struct brcmf_if *ifp, bool rtnl_locked) |
| { |
| if (!ifp || WARN_ON(ifp->drvr->iflist[ifp->bsscfgidx] != ifp)) |
| return; |
| brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", ifp->bsscfgidx, |
| ifp->ifidx); |
| brcmf_proto_del_if(ifp->drvr, ifp); |
| brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked); |
| } |
| |
| static int brcmf_psm_watchdog_notify(struct brcmf_if *ifp, |
| const struct brcmf_event_msg *evtmsg, |
| void *data) |
| { |
| struct brcmf_pub *drvr = ifp->drvr; |
| int err; |
| |
| brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx); |
| |
| bphy_err(drvr, "PSM's watchdog has fired!\n"); |
| |
| err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data, |
| evtmsg->datalen); |
| if (err) |
| bphy_err(drvr, "Failed to get memory dump, %d\n", err); |
| |
| return err; |
| } |
| |
| #ifdef CONFIG_INET |
| #define ARPOL_MAX_ENTRIES 8 |
| static int brcmf_inetaddr_changed(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct brcmf_pub *drvr = container_of(nb, struct brcmf_pub, |
| inetaddr_notifier); |
| struct in_ifaddr *ifa = data; |
| struct net_device *ndev = ifa->ifa_dev->dev; |
| struct brcmf_if *ifp; |
| int idx, i, ret; |
| u32 val; |
| __be32 addr_table[ARPOL_MAX_ENTRIES] = {0}; |
| |
| /* Find out if the notification is meant for us */ |
| for (idx = 0; idx < BRCMF_MAX_IFS; idx++) { |
| ifp = drvr->iflist[idx]; |
| if (ifp && ifp->ndev == ndev) |
| break; |
| if (idx == BRCMF_MAX_IFS - 1) |
| return NOTIFY_DONE; |
| } |
| |
| /* check if arp offload is supported */ |
| ret = brcmf_fil_iovar_int_get(ifp, "arpoe", &val); |
| if (ret) |
| return NOTIFY_OK; |
| |
| /* old version only support primary index */ |
| ret = brcmf_fil_iovar_int_get(ifp, "arp_version", &val); |
| if (ret) |
| val = 1; |
| if (val == 1) |
| ifp = drvr->iflist[0]; |
| |
| /* retrieve the table from firmware */ |
| ret = brcmf_fil_iovar_data_get(ifp, "arp_hostip", addr_table, |
| sizeof(addr_table)); |
| if (ret) { |
| bphy_err(drvr, "fail to get arp ip table err:%d\n", ret); |
| return NOTIFY_OK; |
| } |
| |
| for (i = 0; i < ARPOL_MAX_ENTRIES; i++) |
| if (ifa->ifa_address == addr_table[i]) |
| break; |
| |
| switch (action) { |
| case NETDEV_UP: |
| if (i == ARPOL_MAX_ENTRIES) { |
| brcmf_dbg(TRACE, "add %pI4 to arp table\n", |
| &ifa->ifa_address); |
| /* set it directly */ |
| ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip", |
| &ifa->ifa_address, sizeof(ifa->ifa_address)); |
| if (ret) |
| bphy_err(drvr, "add arp ip err %d\n", ret); |
| } |
| break; |
| case NETDEV_DOWN: |
| if (i < ARPOL_MAX_ENTRIES) { |
| addr_table[i] = 0; |
| brcmf_dbg(TRACE, "remove %pI4 from arp table\n", |
| &ifa->ifa_address); |
| /* clear the table in firmware */ |
| ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear", |
| NULL, 0); |
| if (ret) { |
| bphy_err(drvr, "fail to clear arp ip table err:%d\n", |
| ret); |
| return NOTIFY_OK; |
| } |
| for (i = 0; i < ARPOL_MAX_ENTRIES; i++) { |
| if (addr_table[i] == 0) |
| continue; |
| ret = brcmf_fil_iovar_data_set(ifp, "arp_hostip", |
| &addr_table[i], |
| sizeof(addr_table[i])); |
| if (ret) |
| bphy_err(drvr, "add arp ip err %d\n", |
| ret); |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return NOTIFY_OK; |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_IPV6) |
| static int brcmf_inet6addr_changed(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct brcmf_pub *drvr = container_of(nb, struct brcmf_pub, |
| inet6addr_notifier); |
| struct inet6_ifaddr *ifa = data; |
| struct brcmf_if *ifp; |
| int i; |
| struct in6_addr *table; |
| |
| /* Only handle primary interface */ |
| ifp = drvr->iflist[0]; |
| if (!ifp) |
| return NOTIFY_DONE; |
| if (ifp->ndev != ifa->idev->dev) |
| return NOTIFY_DONE; |
| |
| table = ifp->ipv6_addr_tbl; |
| for (i = 0; i < NDOL_MAX_ENTRIES; i++) |
| if (ipv6_addr_equal(&ifa->addr, &table[i])) |
| break; |
| |
| switch (action) { |
| case NETDEV_UP: |
| if (i == NDOL_MAX_ENTRIES) { |
| if (ifp->ipv6addr_idx < NDOL_MAX_ENTRIES) { |
| table[ifp->ipv6addr_idx++] = ifa->addr; |
| } else { |
| for (i = 0; i < NDOL_MAX_ENTRIES - 1; i++) |
| table[i] = table[i + 1]; |
| table[NDOL_MAX_ENTRIES - 1] = ifa->addr; |
| } |
| } |
| break; |
| case NETDEV_DOWN: |
| if (i < NDOL_MAX_ENTRIES) { |
| for (; i < ifp->ipv6addr_idx - 1; i++) |
| table[i] = table[i + 1]; |
| memset(&table[i], 0, sizeof(table[i])); |
| ifp->ipv6addr_idx--; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| schedule_work(&ifp->ndoffload_work); |
| |
| return NOTIFY_OK; |
| } |
| #endif |
| |
| static int brcmf_revinfo_read(struct seq_file *s, void *data) |
| { |
| struct brcmf_bus *bus_if = dev_get_drvdata(s->private); |
| struct brcmf_rev_info *ri = &bus_if->drvr->revinfo; |
| char drev[BRCMU_DOTREV_LEN]; |
| char brev[BRCMU_BOARDREV_LEN]; |
| |
| seq_printf(s, "vendorid: 0x%04x\n", ri->vendorid); |
| seq_printf(s, "deviceid: 0x%04x\n", ri->deviceid); |
| seq_printf(s, "radiorev: %s\n", brcmu_dotrev_str(ri->radiorev, drev)); |
| seq_printf(s, "chip: %s\n", ri->chipname); |
| seq_printf(s, "chippkg: %u\n", ri->chippkg); |
| seq_printf(s, "corerev: %u\n", ri->corerev); |
| seq_printf(s, "boardid: 0x%04x\n", ri->boardid); |
| seq_printf(s, "boardvendor: 0x%04x\n", ri->boardvendor); |
| seq_printf(s, "boardrev: %s\n", brcmu_boardrev_str(ri->boardrev, brev)); |
| seq_printf(s, "driverrev: %s\n", brcmu_dotrev_str(ri->driverrev, drev)); |
| seq_printf(s, "ucoderev: %u\n", ri->ucoderev); |
| seq_printf(s, "bus: %u\n", ri->bus); |
| seq_printf(s, "phytype: %u\n", ri->phytype); |
| seq_printf(s, "phyrev: %u\n", ri->phyrev); |
| seq_printf(s, "anarev: %u\n", ri->anarev); |
| seq_printf(s, "nvramrev: %08x\n", ri->nvramrev); |
| |
| seq_printf(s, "clmver: %s\n", bus_if->drvr->clmver); |
| |
| return 0; |
| } |
| |
| static int brcmf_bus_started(struct brcmf_pub *drvr, struct cfg80211_ops *ops) |
| { |
| int ret = -1; |
| struct brcmf_bus *bus_if = drvr->bus_if; |
| struct brcmf_if *ifp; |
| struct brcmf_if *p2p_ifp; |
| |
| brcmf_dbg(TRACE, "\n"); |
| |
| /* add primary networking interface */ |
| ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL); |
| if (IS_ERR(ifp)) |
| return PTR_ERR(ifp); |
| |
| p2p_ifp = NULL; |
| |
| /* signal bus ready */ |
| brcmf_bus_change_state(bus_if, BRCMF_BUS_UP); |
| |
| /* do bus specific preinit here */ |
| ret = brcmf_bus_preinit(bus_if); |
| if (ret < 0) |
| goto fail; |
| |
| /* Bus is ready, do any initialization */ |
| ret = brcmf_c_preinit_dcmds(ifp); |
| if (ret < 0) |
| goto fail; |
| |
| brcmf_feat_attach(drvr); |
| |
| ret = brcmf_proto_init_done(drvr); |
| if (ret < 0) |
| goto fail; |
| |
| brcmf_proto_add_if(drvr, ifp); |
| |
| drvr->config = brcmf_cfg80211_attach(drvr, ops, |
| drvr->settings->p2p_enable); |
| if (drvr->config == NULL) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| ret = brcmf_net_attach(ifp, false); |
| |
| if ((!ret) && (drvr->settings->p2p_enable)) { |
| p2p_ifp = drvr->iflist[1]; |
| if (p2p_ifp) |
| ret = brcmf_net_p2p_attach(p2p_ifp); |
| } |
| |
| if (ret) |
| goto fail; |
| |
| #ifdef CONFIG_INET |
| drvr->inetaddr_notifier.notifier_call = brcmf_inetaddr_changed; |
| ret = register_inetaddr_notifier(&drvr->inetaddr_notifier); |
| if (ret) |
| goto fail; |
| |
| #if IS_ENABLED(CONFIG_IPV6) |
| drvr->inet6addr_notifier.notifier_call = brcmf_inet6addr_changed; |
| ret = register_inet6addr_notifier(&drvr->inet6addr_notifier); |
| if (ret) { |
| unregister_inetaddr_notifier(&drvr->inetaddr_notifier); |
| goto fail; |
| } |
| #endif |
| #endif /* CONFIG_INET */ |
| |
| /* populate debugfs */ |
| brcmf_debugfs_add_entry(drvr, "revinfo", brcmf_revinfo_read); |
| brcmf_feat_debugfs_create(drvr); |
| brcmf_proto_debugfs_create(drvr); |
| brcmf_bus_debugfs_create(bus_if); |
| |
| return 0; |
| |
| fail: |
| bphy_err(drvr, "failed: %d\n", ret); |
| if (drvr->config) { |
| brcmf_cfg80211_detach(drvr->config); |
| drvr->config = NULL; |
| } |
| brcmf_net_detach(ifp->ndev, false); |
| if (p2p_ifp) |
| brcmf_net_detach(p2p_ifp->ndev, false); |
| drvr->iflist[0] = NULL; |
| drvr->iflist[1] = NULL; |
| if (drvr->settings->ignore_probe_fail) |
| ret = 0; |
| |
| return ret; |
| } |
| |
| int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings) |
| { |
| struct wiphy *wiphy; |
| struct cfg80211_ops *ops; |
| struct brcmf_pub *drvr = NULL; |
| int ret = 0; |
| int i; |
| |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| ops = brcmf_cfg80211_get_ops(settings); |
| if (!ops) |
| return -ENOMEM; |
| |
| wiphy = wiphy_new(ops, sizeof(*drvr)); |
| if (!wiphy) |
| return -ENOMEM; |
| |
| set_wiphy_dev(wiphy, dev); |
| drvr = wiphy_priv(wiphy); |
| drvr->wiphy = wiphy; |
| |
| for (i = 0; i < ARRAY_SIZE(drvr->if2bss); i++) |
| drvr->if2bss[i] = BRCMF_BSSIDX_INVALID; |
| |
| mutex_init(&drvr->proto_block); |
| |
| /* Link to bus module */ |
| drvr->hdrlen = 0; |
| drvr->bus_if = dev_get_drvdata(dev); |
| drvr->bus_if->drvr = drvr; |
| drvr->settings = settings; |
| |
| /* Attach and link in the protocol */ |
| ret = brcmf_proto_attach(drvr); |
| if (ret != 0) { |
| bphy_err(drvr, "brcmf_prot_attach failed\n"); |
| goto fail; |
| } |
| |
| /* Attach to events important for core code */ |
| brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG, |
| brcmf_psm_watchdog_notify); |
| |
| /* attach firmware event handler */ |
| brcmf_fweh_attach(drvr); |
| |
| ret = brcmf_bus_started(drvr, ops); |
| if (ret != 0) { |
| bphy_err(drvr, "dongle is not responding: err=%d\n", ret); |
| goto fail; |
| } |
| |
| drvr->config->ops = ops; |
| return 0; |
| |
| fail: |
| brcmf_detach(dev); |
| kfree(ops); |
| |
| return ret; |
| } |
| |
| void brcmf_bus_add_txhdrlen(struct device *dev, uint len) |
| { |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_pub *drvr = bus_if->drvr; |
| |
| if (drvr) { |
| drvr->hdrlen += len; |
| } |
| } |
| |
| void brcmf_dev_reset(struct device *dev) |
| { |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_pub *drvr = bus_if->drvr; |
| |
| if (drvr == NULL) |
| return; |
| |
| if (drvr->iflist[0]) |
| brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); |
| } |
| |
| void brcmf_dev_coredump(struct device *dev) |
| { |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| |
| if (brcmf_debug_create_memdump(bus_if, NULL, 0) < 0) |
| brcmf_dbg(TRACE, "failed to create coredump\n"); |
| } |
| |
| void brcmf_detach(struct device *dev) |
| { |
| s32 i; |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_pub *drvr = bus_if->drvr; |
| |
| brcmf_dbg(TRACE, "Enter\n"); |
| |
| if (drvr == NULL) |
| return; |
| |
| #ifdef CONFIG_INET |
| unregister_inetaddr_notifier(&drvr->inetaddr_notifier); |
| #endif |
| |
| #if IS_ENABLED(CONFIG_IPV6) |
| unregister_inet6addr_notifier(&drvr->inet6addr_notifier); |
| #endif |
| |
| /* stop firmware event handling */ |
| brcmf_fweh_detach(drvr); |
| if (drvr->config) |
| brcmf_p2p_detach(&drvr->config->p2p); |
| |
| brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN); |
| |
| /* make sure primary interface removed last */ |
| for (i = BRCMF_MAX_IFS-1; i > -1; i--) |
| brcmf_remove_interface(drvr->iflist[i], false); |
| |
| brcmf_cfg80211_detach(drvr->config); |
| drvr->config = NULL; |
| |
| brcmf_bus_stop(drvr->bus_if); |
| |
| brcmf_proto_detach(drvr); |
| |
| bus_if->drvr = NULL; |
| wiphy_free(drvr->wiphy); |
| } |
| |
| s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len) |
| { |
| struct brcmf_bus *bus_if = dev_get_drvdata(dev); |
| struct brcmf_if *ifp = bus_if->drvr->iflist[0]; |
| |
| return brcmf_fil_iovar_data_set(ifp, name, data, len); |
| } |
| |
| static int brcmf_get_pend_8021x_cnt(struct brcmf_if *ifp) |
| { |
| return atomic_read(&ifp->pend_8021x_cnt); |
| } |
| |
| int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp) |
| { |
| struct brcmf_pub *drvr = ifp->drvr; |
| int err; |
| |
| err = wait_event_timeout(ifp->pend_8021x_wait, |
| !brcmf_get_pend_8021x_cnt(ifp), |
| MAX_WAIT_FOR_8021X_TX); |
| |
| if (!err) |
| bphy_err(drvr, "Timed out waiting for no pending 802.1x packets\n"); |
| |
| return !err; |
| } |
| |
| void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state) |
| { |
| struct brcmf_pub *drvr = bus->drvr; |
| struct net_device *ndev; |
| int ifidx; |
| |
| brcmf_dbg(TRACE, "%d -> %d\n", bus->state, state); |
| |
| if (!drvr) { |
| brcmf_dbg(INFO, "ignoring transition, bus not attached yet\n"); |
| return; |
| } |
| |
| bus->state = state; |
| |
| if (state == BRCMF_BUS_UP) { |
| for (ifidx = 0; ifidx < BRCMF_MAX_IFS; ifidx++) { |
| if ((drvr->iflist[ifidx]) && |
| (drvr->iflist[ifidx]->ndev)) { |
| ndev = drvr->iflist[ifidx]->ndev; |
| if (netif_queue_stopped(ndev)) |
| netif_wake_queue(ndev); |
| } |
| } |
| } |
| } |
| |
| static void brcmf_driver_register(struct work_struct *work) |
| { |
| #ifdef CONFIG_BRCMFMAC_SDIO |
| brcmf_sdio_register(); |
| #endif |
| #ifdef CONFIG_BRCMFMAC_USB |
| brcmf_usb_register(); |
| #endif |
| #ifdef CONFIG_BRCMFMAC_PCIE |
| brcmf_pcie_register(); |
| #endif |
| } |
| static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register); |
| |
| int __init brcmf_core_init(void) |
| { |
| if (!schedule_work(&brcmf_driver_work)) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| void __exit brcmf_core_exit(void) |
| { |
| cancel_work_sync(&brcmf_driver_work); |
| |
| #ifdef CONFIG_BRCMFMAC_SDIO |
| brcmf_sdio_exit(); |
| #endif |
| #ifdef CONFIG_BRCMFMAC_USB |
| brcmf_usb_exit(); |
| #endif |
| #ifdef CONFIG_BRCMFMAC_PCIE |
| brcmf_pcie_exit(); |
| #endif |
| } |
| |