| # SPDX-License-Identifier: GPL-2.0-only |
| menu "ARM System Control and Management Interface Protocol" |
| |
| config ARM_SCMI_PROTOCOL |
| tristate "ARM System Control and Management Interface (SCMI) Message Protocol" |
| depends on ARM || ARM64 || COMPILE_TEST |
| help |
| ARM System Control and Management Interface (SCMI) protocol is a |
| set of operating system-independent software interfaces that are |
| used in system management. SCMI is extensible and currently provides |
| interfaces for: Discovery and self-description of the interfaces |
| it supports, Power domain management which is the ability to place |
| a given device or domain into the various power-saving states that |
| it supports, Performance management which is the ability to control |
| the performance of a domain that is composed of compute engines |
| such as application processors and other accelerators, Clock |
| management which is the ability to set and inquire rates on platform |
| managed clocks and Sensor management which is the ability to read |
| sensor data, and be notified of sensor value. |
| |
| This protocol library provides interface for all the client drivers |
| making use of the features offered by the SCMI. |
| |
| if ARM_SCMI_PROTOCOL |
| |
| config ARM_SCMI_NEED_DEBUGFS |
| bool |
| help |
| This declares whether at least one SCMI facility is configured |
| which needs debugfs support. When selected causess the creation |
| of a common SCMI debugfs root directory. |
| |
| config ARM_SCMI_RAW_MODE_SUPPORT |
| bool "Enable support for SCMI Raw transmission mode" |
| depends on DEBUG_FS |
| select ARM_SCMI_NEED_DEBUGFS |
| help |
| Enable support for SCMI Raw transmission mode. |
| |
| If enabled allows the direct injection and snooping of SCMI bare |
| messages through a dedicated debugfs interface. |
| It is meant to be used by SCMI compliance/testing suites. |
| |
| When enabled regular SCMI drivers interactions are inhibited in |
| order to avoid unexpected interactions with the SCMI Raw message |
| flow. If unsure say N. |
| |
| config ARM_SCMI_RAW_MODE_SUPPORT_COEX |
| bool "Allow SCMI Raw mode coexistence with normal SCMI stack" |
| depends on ARM_SCMI_RAW_MODE_SUPPORT |
| help |
| Allow SCMI Raw transmission mode to coexist with normal SCMI stack. |
| |
| This will allow regular SCMI drivers to register with the core and |
| operate normally, thing which could make an SCMI test suite using the |
| SCMI Raw mode support unreliable. If unsure, say N. |
| |
| config ARM_SCMI_HAVE_TRANSPORT |
| bool |
| help |
| This declares whether at least one SCMI transport has been configured. |
| Used to trigger a build bug when trying to build SCMI without any |
| configured transport. |
| |
| config ARM_SCMI_HAVE_SHMEM |
| bool |
| help |
| This declares whether a shared memory based transport for SCMI is |
| available. |
| |
| config ARM_SCMI_HAVE_MSG |
| bool |
| help |
| This declares whether a message passing based transport for SCMI is |
| available. |
| |
| config ARM_SCMI_TRANSPORT_MAILBOX |
| bool "SCMI transport based on Mailbox" |
| depends on MAILBOX |
| select ARM_SCMI_HAVE_TRANSPORT |
| select ARM_SCMI_HAVE_SHMEM |
| default y |
| help |
| Enable mailbox based transport for SCMI. |
| |
| If you want the ARM SCMI PROTOCOL stack to include support for a |
| transport based on mailboxes, answer Y. |
| |
| config ARM_SCMI_TRANSPORT_OPTEE |
| bool "SCMI transport based on OP-TEE service" |
| depends on OPTEE=y || OPTEE=ARM_SCMI_PROTOCOL |
| select ARM_SCMI_HAVE_TRANSPORT |
| select ARM_SCMI_HAVE_SHMEM |
| select ARM_SCMI_HAVE_MSG |
| default y |
| help |
| This enables the OP-TEE service based transport for SCMI. |
| |
| If you want the ARM SCMI PROTOCOL stack to include support for a |
| transport based on OP-TEE SCMI service, answer Y. |
| |
| config ARM_SCMI_TRANSPORT_SMC |
| bool "SCMI transport based on SMC" |
| depends on HAVE_ARM_SMCCC_DISCOVERY |
| select ARM_SCMI_HAVE_TRANSPORT |
| select ARM_SCMI_HAVE_SHMEM |
| default y |
| help |
| Enable SMC based transport for SCMI. |
| |
| If you want the ARM SCMI PROTOCOL stack to include support for a |
| transport based on SMC, answer Y. |
| |
| config ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE |
| bool "Enable atomic mode support for SCMI SMC transport" |
| depends on ARM_SCMI_TRANSPORT_SMC |
| help |
| Enable support of atomic operation for SCMI SMC based transport. |
| |
| If you want the SCMI SMC based transport to operate in atomic |
| mode, avoiding any kind of sleeping behaviour for selected |
| transactions on the TX path, answer Y. |
| Enabling atomic mode operations allows any SCMI driver using this |
| transport to optionally ask for atomic SCMI transactions and operate |
| in atomic context too, at the price of using a number of busy-waiting |
| primitives all over instead. If unsure say N. |
| |
| config ARM_SCMI_TRANSPORT_VIRTIO |
| bool "SCMI transport based on VirtIO" |
| depends on VIRTIO=y || VIRTIO=ARM_SCMI_PROTOCOL |
| select ARM_SCMI_HAVE_TRANSPORT |
| select ARM_SCMI_HAVE_MSG |
| help |
| This enables the virtio based transport for SCMI. |
| |
| If you want the ARM SCMI PROTOCOL stack to include support for a |
| transport based on VirtIO, answer Y. |
| |
| config ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE |
| bool "SCMI VirtIO transport Version 1 compliance" |
| depends on ARM_SCMI_TRANSPORT_VIRTIO |
| default y |
| help |
| This enforces strict compliance with VirtIO Version 1 specification. |
| |
| If you want the ARM SCMI VirtIO transport layer to refuse to work |
| with Legacy VirtIO backends and instead support only VirtIO Version 1 |
| devices (or above), answer Y. |
| |
| If you want instead to support also old Legacy VirtIO backends (like |
| the ones implemented by kvmtool) and let the core Kernel VirtIO layer |
| take care of the needed conversions, say N. |
| |
| config ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE |
| bool "Enable atomic mode for SCMI VirtIO transport" |
| depends on ARM_SCMI_TRANSPORT_VIRTIO |
| help |
| Enable support of atomic operation for SCMI VirtIO based transport. |
| |
| If you want the SCMI VirtIO based transport to operate in atomic |
| mode, avoiding any kind of sleeping behaviour for selected |
| transactions on the TX path, answer Y. |
| |
| Enabling atomic mode operations allows any SCMI driver using this |
| transport to optionally ask for atomic SCMI transactions and operate |
| in atomic context too, at the price of using a number of busy-waiting |
| primitives all over instead. If unsure say N. |
| |
| endif #ARM_SCMI_PROTOCOL |
| |
| config ARM_SCMI_POWER_DOMAIN |
| tristate "SCMI power domain driver" |
| depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) |
| default y |
| select PM_GENERIC_DOMAINS if PM |
| help |
| This enables support for the SCMI power domains which can be |
| enabled or disabled via the SCP firmware |
| |
| This driver can also be built as a module. If so, the module |
| will be called scmi_pm_domain. Note this may needed early in boot |
| before rootfs may be available. |
| |
| config ARM_SCMI_POWER_CONTROL |
| tristate "SCMI system power control driver" |
| depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) |
| help |
| This enables System Power control logic which binds system shutdown or |
| reboot actions to SCMI System Power notifications generated by SCP |
| firmware. |
| |
| This driver can also be built as a module. If so, the module will be |
| called scmi_power_control. Note this may needed early in boot to catch |
| early shutdown/reboot SCMI requests. |
| |
| endmenu |