| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (C) 2018 Intel Corporation |
| |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| |
| #define AK7375_MAX_FOCUS_POS 4095 |
| /* |
| * This sets the minimum granularity for the focus positions. |
| * A value of 1 gives maximum accuracy for a desired focus position |
| */ |
| #define AK7375_FOCUS_STEPS 1 |
| /* |
| * This acts as the minimum granularity of lens movement. |
| * Keep this value power of 2, so the control steps can be |
| * uniformly adjusted for gradual lens movement, with desired |
| * number of control steps. |
| */ |
| #define AK7375_CTRL_STEPS 64 |
| #define AK7375_CTRL_DELAY_US 1000 |
| /* |
| * The vcm may take up 10 ms (tDELAY) to power on and start taking |
| * I2C messages. Based on AK7371 datasheet. |
| */ |
| #define AK7375_POWER_DELAY_US 10000 |
| |
| #define AK7375_REG_POSITION 0x0 |
| #define AK7375_REG_CONT 0x2 |
| #define AK7375_MODE_ACTIVE 0x0 |
| #define AK7375_MODE_STANDBY 0x40 |
| |
| static const char * const ak7375_supply_names[] = { |
| "vdd", |
| "vio", |
| }; |
| |
| /* ak7375 device structure */ |
| struct ak7375_device { |
| struct v4l2_ctrl_handler ctrls_vcm; |
| struct v4l2_subdev sd; |
| struct v4l2_ctrl *focus; |
| struct regulator_bulk_data supplies[ARRAY_SIZE(ak7375_supply_names)]; |
| |
| /* active or standby mode */ |
| bool active; |
| }; |
| |
| static inline struct ak7375_device *to_ak7375_vcm(struct v4l2_ctrl *ctrl) |
| { |
| return container_of(ctrl->handler, struct ak7375_device, ctrls_vcm); |
| } |
| |
| static inline struct ak7375_device *sd_to_ak7375_vcm(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct ak7375_device, sd); |
| } |
| |
| static int ak7375_i2c_write(struct ak7375_device *ak7375, |
| u8 addr, u16 data, u8 size) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&ak7375->sd); |
| u8 buf[3]; |
| int ret; |
| |
| if (size != 1 && size != 2) |
| return -EINVAL; |
| buf[0] = addr; |
| buf[size] = data & 0xff; |
| if (size == 2) |
| buf[1] = (data >> 8) & 0xff; |
| ret = i2c_master_send(client, (const char *)buf, size + 1); |
| if (ret < 0) |
| return ret; |
| if (ret != size + 1) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int ak7375_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct ak7375_device *dev_vcm = to_ak7375_vcm(ctrl); |
| |
| if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) |
| return ak7375_i2c_write(dev_vcm, AK7375_REG_POSITION, |
| ctrl->val << 4, 2); |
| |
| return -EINVAL; |
| } |
| |
| static const struct v4l2_ctrl_ops ak7375_vcm_ctrl_ops = { |
| .s_ctrl = ak7375_set_ctrl, |
| }; |
| |
| static int ak7375_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| return pm_runtime_resume_and_get(sd->dev); |
| } |
| |
| static int ak7375_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| pm_runtime_put(sd->dev); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_internal_ops ak7375_int_ops = { |
| .open = ak7375_open, |
| .close = ak7375_close, |
| }; |
| |
| static const struct v4l2_subdev_ops ak7375_ops = { }; |
| |
| static void ak7375_subdev_cleanup(struct ak7375_device *ak7375_dev) |
| { |
| v4l2_async_unregister_subdev(&ak7375_dev->sd); |
| v4l2_ctrl_handler_free(&ak7375_dev->ctrls_vcm); |
| media_entity_cleanup(&ak7375_dev->sd.entity); |
| } |
| |
| static int ak7375_init_controls(struct ak7375_device *dev_vcm) |
| { |
| struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm; |
| const struct v4l2_ctrl_ops *ops = &ak7375_vcm_ctrl_ops; |
| |
| v4l2_ctrl_handler_init(hdl, 1); |
| |
| dev_vcm->focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE, |
| 0, AK7375_MAX_FOCUS_POS, AK7375_FOCUS_STEPS, 0); |
| |
| if (hdl->error) |
| dev_err(dev_vcm->sd.dev, "%s fail error: 0x%x\n", |
| __func__, hdl->error); |
| dev_vcm->sd.ctrl_handler = hdl; |
| |
| return hdl->error; |
| } |
| |
| static int ak7375_probe(struct i2c_client *client) |
| { |
| struct ak7375_device *ak7375_dev; |
| int ret; |
| unsigned int i; |
| |
| ak7375_dev = devm_kzalloc(&client->dev, sizeof(*ak7375_dev), |
| GFP_KERNEL); |
| if (!ak7375_dev) |
| return -ENOMEM; |
| |
| for (i = 0; i < ARRAY_SIZE(ak7375_supply_names); i++) |
| ak7375_dev->supplies[i].supply = ak7375_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(&client->dev, |
| ARRAY_SIZE(ak7375_supply_names), |
| ak7375_dev->supplies); |
| if (ret) { |
| dev_err_probe(&client->dev, ret, "Failed to get regulators\n"); |
| return ret; |
| } |
| |
| v4l2_i2c_subdev_init(&ak7375_dev->sd, client, &ak7375_ops); |
| ak7375_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| ak7375_dev->sd.internal_ops = &ak7375_int_ops; |
| ak7375_dev->sd.entity.function = MEDIA_ENT_F_LENS; |
| |
| ret = ak7375_init_controls(ak7375_dev); |
| if (ret) |
| goto err_cleanup; |
| |
| ret = media_entity_pads_init(&ak7375_dev->sd.entity, 0, NULL); |
| if (ret < 0) |
| goto err_cleanup; |
| |
| ret = v4l2_async_register_subdev(&ak7375_dev->sd); |
| if (ret < 0) |
| goto err_cleanup; |
| |
| pm_runtime_set_active(&client->dev); |
| pm_runtime_enable(&client->dev); |
| pm_runtime_idle(&client->dev); |
| |
| return 0; |
| |
| err_cleanup: |
| v4l2_ctrl_handler_free(&ak7375_dev->ctrls_vcm); |
| media_entity_cleanup(&ak7375_dev->sd.entity); |
| |
| return ret; |
| } |
| |
| static void ak7375_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct ak7375_device *ak7375_dev = sd_to_ak7375_vcm(sd); |
| |
| ak7375_subdev_cleanup(ak7375_dev); |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| } |
| |
| /* |
| * This function sets the vcm position, so it consumes least current |
| * The lens position is gradually moved in units of AK7375_CTRL_STEPS, |
| * to make the movements smoothly. |
| */ |
| static int __maybe_unused ak7375_vcm_suspend(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct ak7375_device *ak7375_dev = sd_to_ak7375_vcm(sd); |
| int ret, val; |
| |
| if (!ak7375_dev->active) |
| return 0; |
| |
| for (val = ak7375_dev->focus->val & ~(AK7375_CTRL_STEPS - 1); |
| val >= 0; val -= AK7375_CTRL_STEPS) { |
| ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_POSITION, |
| val << 4, 2); |
| if (ret) |
| dev_err_once(dev, "%s I2C failure: %d\n", |
| __func__, ret); |
| usleep_range(AK7375_CTRL_DELAY_US, AK7375_CTRL_DELAY_US + 10); |
| } |
| |
| ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_CONT, |
| AK7375_MODE_STANDBY, 1); |
| if (ret) |
| dev_err(dev, "%s I2C failure: %d\n", __func__, ret); |
| |
| ret = regulator_bulk_disable(ARRAY_SIZE(ak7375_supply_names), |
| ak7375_dev->supplies); |
| if (ret) |
| return ret; |
| |
| ak7375_dev->active = false; |
| |
| return 0; |
| } |
| |
| /* |
| * This function sets the vcm position to the value set by the user |
| * through v4l2_ctrl_ops s_ctrl handler |
| * The lens position is gradually moved in units of AK7375_CTRL_STEPS, |
| * to make the movements smoothly. |
| */ |
| static int __maybe_unused ak7375_vcm_resume(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct ak7375_device *ak7375_dev = sd_to_ak7375_vcm(sd); |
| int ret, val; |
| |
| if (ak7375_dev->active) |
| return 0; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ak7375_supply_names), |
| ak7375_dev->supplies); |
| if (ret) |
| return ret; |
| |
| /* Wait for vcm to become ready */ |
| usleep_range(AK7375_POWER_DELAY_US, AK7375_POWER_DELAY_US + 500); |
| |
| ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_CONT, |
| AK7375_MODE_ACTIVE, 1); |
| if (ret) { |
| dev_err(dev, "%s I2C failure: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| for (val = ak7375_dev->focus->val % AK7375_CTRL_STEPS; |
| val <= ak7375_dev->focus->val; |
| val += AK7375_CTRL_STEPS) { |
| ret = ak7375_i2c_write(ak7375_dev, AK7375_REG_POSITION, |
| val << 4, 2); |
| if (ret) |
| dev_err_ratelimited(dev, "%s I2C failure: %d\n", |
| __func__, ret); |
| usleep_range(AK7375_CTRL_DELAY_US, AK7375_CTRL_DELAY_US + 10); |
| } |
| |
| ak7375_dev->active = true; |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ak7375_of_table[] = { |
| { .compatible = "asahi-kasei,ak7375" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, ak7375_of_table); |
| |
| static const struct dev_pm_ops ak7375_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(ak7375_vcm_suspend, ak7375_vcm_resume) |
| SET_RUNTIME_PM_OPS(ak7375_vcm_suspend, ak7375_vcm_resume, NULL) |
| }; |
| |
| static struct i2c_driver ak7375_i2c_driver = { |
| .driver = { |
| .name = "ak7375", |
| .pm = &ak7375_pm_ops, |
| .of_match_table = ak7375_of_table, |
| }, |
| .probe_new = ak7375_probe, |
| .remove = ak7375_remove, |
| }; |
| module_i2c_driver(ak7375_i2c_driver); |
| |
| MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@intel.com>"); |
| MODULE_AUTHOR("Bingbu Cao <bingbu.cao@intel.com>"); |
| MODULE_DESCRIPTION("AK7375 VCM driver"); |
| MODULE_LICENSE("GPL v2"); |