drivers/i2c/i2c-smbus.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * i2c-smbus.c - SMBus extensions to the I2C protocol
  *
  * Copyright (C) 2008 David Brownell
  * Copyright (C) 2010-2019 Jean Delvare <jdelvare@suse.de>
  */

 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/i2c-smbus.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>

 struct i2c_smbus_alert {
 	struct work_struct	alert;
 	struct i2c_client	*ara;		/* Alert response address */
 };

 struct alert_data {
 	unsigned short		addr;
 	enum i2c_alert_protocol	type;
 	unsigned int		data;
 };

 /* If this is the alerting device, notify its driver */
 static int smbus_do_alert(struct device *dev, void *addrp)
 {
 	struct i2c_client *client = i2c_verify_client(dev);
 	struct alert_data *data = addrp;
 	struct i2c_driver *driver;

 	if (!client || client->addr != data->addr)
 		return 0;
 	if (client->flags & I2C_CLIENT_TEN)
 		return 0;

 	/*
 	 * Drivers should either disable alerts, or provide at least
 	 * a minimal handler.  Lock so the driver won't change.
 	 */
 	device_lock(dev);
 	if (client->dev.driver) {
 		driver = to_i2c_driver(client->dev.driver);
 		if (driver->alert)
 			driver->alert(client, data->type, data->data);
 		else
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
 		dev_dbg(&client->dev, "alert with no driver\n");
 	device_unlock(dev);

 	/* Stop iterating after we find the device */
 	return -EBUSY;
 }

 /*
  * The alert IRQ handler needs to hand work off to a task which can issue
  * SMBus calls, because those sleeping calls can't be made in IRQ context.
  */
 static irqreturn_t smbus_alert(int irq, void *d)
 {
 	struct i2c_smbus_alert *alert = d;
 	struct i2c_client *ara;

 	ara = alert->ara;

 	for (;;) {
 		s32 status;
 		struct alert_data data;

 		/*
 		 * Devices with pending alerts reply in address order, low
 		 * to high, because of slave transmit arbitration.  After
 		 * responding, an SMBus device stops asserting SMBALERT#.
 		 *
 		 * Note that SMBus 2.0 reserves 10-bit addresses for future
 		 * use.  We neither handle them, nor try to use PEC here.
 		 */
 		status = i2c_smbus_read_byte(ara);
 		if (status < 0)
 			break;

 		data.data = status & 1;
 		data.addr = status >> 1;
 		data.type = I2C_PROTOCOL_SMBUS_ALERT;

 		dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n",
 			data.addr, data.data);

 		/* Notify driver for the device which issued the alert */
 		device_for_each_child(&ara->adapter->dev, &data,
 				      smbus_do_alert);
 	}

 	return IRQ_HANDLED;
 }

 static void smbalert_work(struct work_struct *work)
 {
 	struct i2c_smbus_alert *alert;

 	alert = container_of(work, struct i2c_smbus_alert, alert);

 	smbus_alert(0, alert);

 }

 /* Setup SMBALERT# infrastructure */
 static int smbalert_probe(struct i2c_client *ara,
 			  const struct i2c_device_id *id)
 {
 	struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
 	struct i2c_smbus_alert *alert;
 	struct i2c_adapter *adapter = ara->adapter;
 	int res, irq;

 	alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert),
 			     GFP_KERNEL);
 	if (!alert)
 		return -ENOMEM;

 	if (setup) {
 		irq = setup->irq;
 	} else {
 		irq = fwnode_irq_get_byname(dev_fwnode(adapter->dev.parent),
 					    "smbus_alert");
 		if (irq <= 0)
 			return irq;
 	}

 	INIT_WORK(&alert->alert, smbalert_work);
 	alert->ara = ara;

 	if (irq > 0) {
 		res = devm_request_threaded_irq(&ara->dev, irq,
 						NULL, smbus_alert,
 						IRQF_SHARED | IRQF_ONESHOT,
 						"smbus_alert", alert);
 		if (res)
 			return res;
 	}

 	i2c_set_clientdata(ara, alert);
 	dev_info(&adapter->dev, "supports SMBALERT#\n");

 	return 0;
 }

 /* IRQ and memory resources are managed so they are freed automatically */
 static int smbalert_remove(struct i2c_client *ara)
 {
 	struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);

 	cancel_work_sync(&alert->alert);
 	return 0;
 }

 static const struct i2c_device_id smbalert_ids[] = {
 	{ "smbus_alert", 0 },
 	{ /* LIST END */ }
 };
 MODULE_DEVICE_TABLE(i2c, smbalert_ids);

 static struct i2c_driver smbalert_driver = {
 	.driver = {
 		.name	= "smbus_alert",
 	},
 	.probe		= smbalert_probe,
 	.remove		= smbalert_remove,
 	.id_table	= smbalert_ids,
 };

 /**
  * i2c_handle_smbus_alert - Handle an SMBus alert
  * @ara: the ARA client on the relevant adapter
  * Context: can't sleep
  *
  * Helper function to be called from an I2C bus driver's interrupt
  * handler. It will schedule the alert work, in turn calling the
  * corresponding I2C device driver's alert function.
  *
  * It is assumed that ara is a valid i2c client previously returned by
  * i2c_new_smbus_alert_device().
  */
 int i2c_handle_smbus_alert(struct i2c_client *ara)
 {
 	struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);

 	return schedule_work(&alert->alert);
 }
 EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);

 module_i2c_driver(smbalert_driver);

 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 #define SMBUS_HOST_NOTIFY_LEN	3
 struct i2c_slave_host_notify_status {
 	u8 index;
 	u8 addr;
 };

 static int i2c_slave_host_notify_cb(struct i2c_client *client,
 				    enum i2c_slave_event event, u8 *val)
 {
 	struct i2c_slave_host_notify_status *status = client->dev.platform_data;

 	switch (event) {
 	case I2C_SLAVE_WRITE_RECEIVED:
 		/* We only retrieve the first byte received (addr)
 		 * since there is currently no support to retrieve the data
 		 * parameter from the client.
 		 */
 		if (status->index == 0)
 			status->addr = *val;
 		if (status->index < U8_MAX)
 			status->index++;
 		break;
 	case I2C_SLAVE_STOP:
 		if (status->index == SMBUS_HOST_NOTIFY_LEN)
 			i2c_handle_smbus_host_notify(client->adapter,
 						     status->addr);
 		fallthrough;
 	case I2C_SLAVE_WRITE_REQUESTED:
 		status->index = 0;
 		break;
 	case I2C_SLAVE_READ_REQUESTED:
 	case I2C_SLAVE_READ_PROCESSED:
 		*val = 0xff;
 		break;
 	}

 	return 0;
 }

 /**
  * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
  * @adapter: the target adapter
  * Context: can sleep
  *
  * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
  *
  * Handling is done by creating a device and its callback and handling data
  * received via the SMBus host-notify address (0x8)
  *
  * This returns the client, which should be ultimately freed using
  * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
  */
 struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
 {
 	struct i2c_board_info host_notify_board_info = {
 		I2C_BOARD_INFO("smbus_host_notify", 0x08),
 		.flags  = I2C_CLIENT_SLAVE,
 	};
 	struct i2c_slave_host_notify_status *status;
 	struct i2c_client *client;
 	int ret;

 	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
 			 GFP_KERNEL);
 	if (!status)
 		return ERR_PTR(-ENOMEM);

 	host_notify_board_info.platform_data = status;

 	client = i2c_new_client_device(adapter, &host_notify_board_info);
 	if (IS_ERR(client)) {
 		kfree(status);
 		return client;
 	}

 	ret = i2c_slave_register(client, i2c_slave_host_notify_cb);
 	if (ret) {
 		i2c_unregister_device(client);
 		kfree(status);
 		return ERR_PTR(ret);
 	}

 	return client;
 }
 EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device);

 /**
  * i2c_free_slave_host_notify_device - free the client for SMBus host-notify
  * support
  * @client: the client to free
  * Context: can sleep
  *
  * Free the i2c_client allocated via i2c_new_slave_host_notify_device
  */
 void i2c_free_slave_host_notify_device(struct i2c_client *client)
 {
 	if (IS_ERR_OR_NULL(client))
 		return;

 	i2c_slave_unregister(client);
 	kfree(client->dev.platform_data);
 	i2c_unregister_device(client);
 }
 EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
 #endif

 /*
  * SPD is not part of SMBus but we include it here for convenience as the
  * target systems are the same.
  * Restrictions to automatic SPD instantiation:
  *  - Only works if all filled slots have the same memory type
  *  - Only works for DDR2, DDR3 and DDR4 for now
  *  - Only works on systems with 1 to 4 memory slots
  */
 #if IS_ENABLED(CONFIG_DMI)
 void i2c_register_spd(struct i2c_adapter *adap)
 {
 	int n, slot_count = 0, dimm_count = 0;
 	u16 handle;
 	u8 common_mem_type = 0x0, mem_type;
 	u64 mem_size;
 	const char *name;

 	while ((handle = dmi_memdev_handle(slot_count)) != 0xffff) {
 		slot_count++;

 		/* Skip empty slots */
 		mem_size = dmi_memdev_size(handle);
 		if (!mem_size)
 			continue;

 		/* Skip undefined memory type */
 		mem_type = dmi_memdev_type(handle);
 		if (mem_type <= 0x02)		/* Invalid, Other, Unknown */
 			continue;

 		if (!common_mem_type) {
 			/* First filled slot */
 			common_mem_type = mem_type;
 		} else {
 			/* Check that all filled slots have the same type */
 			if (mem_type != common_mem_type) {
 				dev_warn(&adap->dev,
 					 "Different memory types mixed, not instantiating SPD\n");
 				return;
 			}
 		}
 		dimm_count++;
 	}

 	/* No useful DMI data, bail out */
 	if (!dimm_count)
 		return;

 	dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
 		 dimm_count, slot_count);

 	if (slot_count > 4) {
 		dev_warn(&adap->dev,
 			 "Systems with more than 4 memory slots not supported yet, not instantiating SPD\n");
 		return;
 	}

 	switch (common_mem_type) {
 	case 0x13:	/* DDR2 */
 	case 0x18:	/* DDR3 */
 	case 0x1C:	/* LPDDR2 */
 	case 0x1D:	/* LPDDR3 */
 		name = "spd";
 		break;
 	case 0x1A:	/* DDR4 */
 	case 0x1E:	/* LPDDR4 */
 		name = "ee1004";
 		break;
 	default:
 		dev_info(&adap->dev,
 			 "Memory type 0x%02x not supported yet, not instantiating SPD\n",
 			 common_mem_type);
 		return;
 	}

 	/*
 	 * We don't know in which slots the memory modules are. We could
 	 * try to guess from the slot names, but that would be rather complex
 	 * and unreliable, so better probe all possible addresses until we
 	 * have found all memory modules.
 	 */
 	for (n = 0; n < slot_count && dimm_count; n++) {
 		struct i2c_board_info info;
 		unsigned short addr_list[2];

 		memset(&info, 0, sizeof(struct i2c_board_info));
 		strlcpy(info.type, name, I2C_NAME_SIZE);
 		addr_list[0] = 0x50 + n;
 		addr_list[1] = I2C_CLIENT_END;

 		if (!IS_ERR(i2c_new_scanned_device(adap, &info, addr_list, NULL))) {
 			dev_info(&adap->dev,
 				 "Successfully instantiated SPD at 0x%hx\n",
 				 addr_list[0]);
 			dimm_count--;
 		}
 	}
 }
 EXPORT_SYMBOL_GPL(i2c_register_spd);
 #endif

 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
 MODULE_DESCRIPTION("SMBus protocol extensions support");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* i2c-smbus.c - SMBus extensions to the I2C protocol
	*
	* Copyright (C) 2008 David Brownell
	* Copyright (C) 2010-2019 Jean Delvare <jdelvare@suse.de>
	*/

	#include <linux/device.h>
	#include <linux/dmi.h>
	#include <linux/i2c.h>
	#include <linux/i2c-smbus.h>
	#include <linux/interrupt.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/property.h>
	#include <linux/slab.h>
	#include <linux/workqueue.h>

	struct i2c_smbus_alert {
	struct work_struct alert;
	struct i2c_client ara; / Alert response address */
	};

	struct alert_data {
	unsigned short addr;
	enum i2c_alert_protocol type;
	unsigned int data;
	};

	/* If this is the alerting device, notify its driver */
	static int smbus_do_alert(struct device dev, void addrp)
	{
	struct i2c_client *client = i2c_verify_client(dev);
	struct alert_data *data = addrp;
	struct i2c_driver *driver;

	if (!client \|\| client->addr != data->addr)
	return 0;
	if (client->flags & I2C_CLIENT_TEN)
	return 0;

	/*
	* Drivers should either disable alerts, or provide at least
	* a minimal handler. Lock so the driver won't change.
	*/
	device_lock(dev);
	if (client->dev.driver) {
	driver = to_i2c_driver(client->dev.driver);
	if (driver->alert)
	driver->alert(client, data->type, data->data);
	else
	dev_warn(&client->dev, "no driver alert()!\n");
	} else
	dev_dbg(&client->dev, "alert with no driver\n");
	device_unlock(dev);

	/* Stop iterating after we find the device */
	return -EBUSY;
	}

	/*
	* The alert IRQ handler needs to hand work off to a task which can issue
	* SMBus calls, because those sleeping calls can't be made in IRQ context.
	*/
	static irqreturn_t smbus_alert(int irq, void *d)
	{
	struct i2c_smbus_alert *alert = d;
	struct i2c_client *ara;

	ara = alert->ara;

	for (;;) {
	s32 status;
	struct alert_data data;

	/*
	* Devices with pending alerts reply in address order, low
	* to high, because of slave transmit arbitration. After
	* responding, an SMBus device stops asserting SMBALERT#.
	*
	* Note that SMBus 2.0 reserves 10-bit addresses for future
	* use. We neither handle them, nor try to use PEC here.
	*/
	status = i2c_smbus_read_byte(ara);
	if (status < 0)
	break;

	data.data = status & 1;
	data.addr = status >> 1;
	data.type = I2C_PROTOCOL_SMBUS_ALERT;

	dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n",
	data.addr, data.data);

	/* Notify driver for the device which issued the alert */
	device_for_each_child(&ara->adapter->dev, &data,
	smbus_do_alert);
	}

	return IRQ_HANDLED;
	}

	static void smbalert_work(struct work_struct *work)
	{
	struct i2c_smbus_alert *alert;

	alert = container_of(work, struct i2c_smbus_alert, alert);

	smbus_alert(0, alert);

	}

	/* Setup SMBALERT# infrastructure */
	static int smbalert_probe(struct i2c_client *ara,
	const struct i2c_device_id *id)
	{
	struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
	struct i2c_smbus_alert *alert;
	struct i2c_adapter *adapter = ara->adapter;
	int res, irq;

	alert = devm_kzalloc(&ara->dev, sizeof(struct i2c_smbus_alert),
	GFP_KERNEL);
	if (!alert)
	return -ENOMEM;

	if (setup) {
	irq = setup->irq;
	} else {
	irq = fwnode_irq_get_byname(dev_fwnode(adapter->dev.parent),
	"smbus_alert");
	if (irq <= 0)
	return irq;
	}

	INIT_WORK(&alert->alert, smbalert_work);
	alert->ara = ara;

	if (irq > 0) {
	res = devm_request_threaded_irq(&ara->dev, irq,
	NULL, smbus_alert,
	IRQF_SHARED \| IRQF_ONESHOT,
	"smbus_alert", alert);
	if (res)
	return res;
	}

	i2c_set_clientdata(ara, alert);
	dev_info(&adapter->dev, "supports SMBALERT#\n");

	return 0;
	}

	/* IRQ and memory resources are managed so they are freed automatically */
	static int smbalert_remove(struct i2c_client *ara)
	{
	struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);

	cancel_work_sync(&alert->alert);
	return 0;
	}

	static const struct i2c_device_id smbalert_ids[] = {
	{ "smbus_alert", 0 },
	{ /* LIST END */ }
	};
	MODULE_DEVICE_TABLE(i2c, smbalert_ids);

	static struct i2c_driver smbalert_driver = {
	.driver = {
	.name = "smbus_alert",
	},
	.probe = smbalert_probe,
	.remove = smbalert_remove,
	.id_table = smbalert_ids,
	};

	/**
	* i2c_handle_smbus_alert - Handle an SMBus alert
	* @ara: the ARA client on the relevant adapter
	* Context: can't sleep
	*
	* Helper function to be called from an I2C bus driver's interrupt
	* handler. It will schedule the alert work, in turn calling the
	* corresponding I2C device driver's alert function.
	*
	* It is assumed that ara is a valid i2c client previously returned by
	* i2c_new_smbus_alert_device().
	*/
	int i2c_handle_smbus_alert(struct i2c_client *ara)
	{
	struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);

	return schedule_work(&alert->alert);
	}
	EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);

	module_i2c_driver(smbalert_driver);

	#if IS_ENABLED(CONFIG_I2C_SLAVE)
	#define SMBUS_HOST_NOTIFY_LEN 3
	struct i2c_slave_host_notify_status {
	u8 index;
	u8 addr;
	};

	static int i2c_slave_host_notify_cb(struct i2c_client *client,
	enum i2c_slave_event event, u8 *val)
	{
	struct i2c_slave_host_notify_status *status = client->dev.platform_data;

	switch (event) {
	case I2C_SLAVE_WRITE_RECEIVED:
	/* We only retrieve the first byte received (addr)
	* since there is currently no support to retrieve the data
	* parameter from the client.
	*/
	if (status->index == 0)
	status->addr = *val;
	if (status->index < U8_MAX)
	status->index++;
	break;
	case I2C_SLAVE_STOP:
	if (status->index == SMBUS_HOST_NOTIFY_LEN)
	i2c_handle_smbus_host_notify(client->adapter,
	status->addr);
	fallthrough;
	case I2C_SLAVE_WRITE_REQUESTED:
	status->index = 0;
	break;
	case I2C_SLAVE_READ_REQUESTED:
	case I2C_SLAVE_READ_PROCESSED:
	*val = 0xff;
	break;
	}

	return 0;
	}

	/**
	* i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
	* @adapter: the target adapter
	* Context: can sleep
	*
	* Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
	*
	* Handling is done by creating a device and its callback and handling data
	* received via the SMBus host-notify address (0x8)
	*
	* This returns the client, which should be ultimately freed using
	* i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
	*/
	struct i2c_client i2c_new_slave_host_notify_device(struct i2c_adapter adapter)
	{
	struct i2c_board_info host_notify_board_info = {
	I2C_BOARD_INFO("smbus_host_notify", 0x08),
	.flags = I2C_CLIENT_SLAVE,
	};
	struct i2c_slave_host_notify_status *status;
	struct i2c_client *client;
	int ret;

	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
	GFP_KERNEL);
	if (!status)
	return ERR_PTR(-ENOMEM);

	host_notify_board_info.platform_data = status;

	client = i2c_new_client_device(adapter, &host_notify_board_info);
	if (IS_ERR(client)) {
	kfree(status);
	return client;
	}

	ret = i2c_slave_register(client, i2c_slave_host_notify_cb);
	if (ret) {
	i2c_unregister_device(client);
	kfree(status);
	return ERR_PTR(ret);
	}

	return client;
	}
	EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device);

	/**
	* i2c_free_slave_host_notify_device - free the client for SMBus host-notify
	* support
	* @client: the client to free
	* Context: can sleep
	*
	* Free the i2c_client allocated via i2c_new_slave_host_notify_device
	*/
	void i2c_free_slave_host_notify_device(struct i2c_client *client)
	{
	if (IS_ERR_OR_NULL(client))
	return;

	i2c_slave_unregister(client);
	kfree(client->dev.platform_data);
	i2c_unregister_device(client);
	}
	EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
	#endif

	/*
	* SPD is not part of SMBus but we include it here for convenience as the
	* target systems are the same.
	* Restrictions to automatic SPD instantiation:
	* - Only works if all filled slots have the same memory type
	* - Only works for DDR2, DDR3 and DDR4 for now
	* - Only works on systems with 1 to 4 memory slots
	*/
	#if IS_ENABLED(CONFIG_DMI)
	void i2c_register_spd(struct i2c_adapter *adap)
	{
	int n, slot_count = 0, dimm_count = 0;
	u16 handle;
	u8 common_mem_type = 0x0, mem_type;
	u64 mem_size;
	const char *name;

	while ((handle = dmi_memdev_handle(slot_count)) != 0xffff) {
	slot_count++;

	/* Skip empty slots */
	mem_size = dmi_memdev_size(handle);
	if (!mem_size)
	continue;

	/* Skip undefined memory type */
	mem_type = dmi_memdev_type(handle);
	if (mem_type <= 0x02) /* Invalid, Other, Unknown */
	continue;

	if (!common_mem_type) {
	/* First filled slot */
	common_mem_type = mem_type;
	} else {
	/* Check that all filled slots have the same type */
	if (mem_type != common_mem_type) {
	dev_warn(&adap->dev,
	"Different memory types mixed, not instantiating SPD\n");
	return;
	}
	}
	dimm_count++;
	}

	/* No useful DMI data, bail out */
	if (!dimm_count)
	return;

	dev_info(&adap->dev, "%d/%d memory slots populated (from DMI)\n",
	dimm_count, slot_count);

	if (slot_count > 4) {
	dev_warn(&adap->dev,
	"Systems with more than 4 memory slots not supported yet, not instantiating SPD\n");
	return;
	}

	switch (common_mem_type) {
	case 0x13: /* DDR2 */
	case 0x18: /* DDR3 */
	case 0x1C: /* LPDDR2 */
	case 0x1D: /* LPDDR3 */
	name = "spd";
	break;
	case 0x1A: /* DDR4 */
	case 0x1E: /* LPDDR4 */
	name = "ee1004";
	break;
	default:
	dev_info(&adap->dev,
	"Memory type 0x%02x not supported yet, not instantiating SPD\n",
	common_mem_type);
	return;
	}

	/*
	* We don't know in which slots the memory modules are. We could
	* try to guess from the slot names, but that would be rather complex
	* and unreliable, so better probe all possible addresses until we
	* have found all memory modules.
	*/
	for (n = 0; n < slot_count && dimm_count; n++) {
	struct i2c_board_info info;
	unsigned short addr_list[2];

	memset(&info, 0, sizeof(struct i2c_board_info));
	strlcpy(info.type, name, I2C_NAME_SIZE);
	addr_list[0] = 0x50 + n;
	addr_list[1] = I2C_CLIENT_END;

	if (!IS_ERR(i2c_new_scanned_device(adap, &info, addr_list, NULL))) {
	dev_info(&adap->dev,
	"Successfully instantiated SPD at 0x%hx\n",
	addr_list[0]);
	dimm_count--;
	}
	}
	}
	EXPORT_SYMBOL_GPL(i2c_register_spd);
	#endif

	MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
	MODULE_DESCRIPTION("SMBus protocol extensions support");
	MODULE_LICENSE("GPL");