| // SPDX-License-Identifier: GPL-2.0-only |
| /****************************************************************************** |
| ******************************************************************************* |
| ** |
| ** Copyright (C) 2005-2007 Red Hat, Inc. All rights reserved. |
| ** |
| ** |
| ******************************************************************************* |
| ******************************************************************************/ |
| |
| #include "dlm_internal.h" |
| #include "member.h" |
| #include "lock.h" |
| #include "dir.h" |
| #include "config.h" |
| #include "requestqueue.h" |
| #include "util.h" |
| |
| struct rq_entry { |
| struct list_head list; |
| uint32_t recover_seq; |
| int nodeid; |
| struct dlm_message request; |
| }; |
| |
| /* |
| * Requests received while the lockspace is in recovery get added to the |
| * request queue and processed when recovery is complete. This happens when |
| * the lockspace is suspended on some nodes before it is on others, or the |
| * lockspace is enabled on some while still suspended on others. |
| */ |
| |
| void dlm_add_requestqueue(struct dlm_ls *ls, int nodeid, struct dlm_message *ms) |
| { |
| struct rq_entry *e; |
| int length = le16_to_cpu(ms->m_header.h_length) - |
| sizeof(struct dlm_message); |
| |
| e = kmalloc(sizeof(struct rq_entry) + length, GFP_NOFS); |
| if (!e) { |
| log_print("dlm_add_requestqueue: out of memory len %d", length); |
| return; |
| } |
| |
| e->recover_seq = ls->ls_recover_seq & 0xFFFFFFFF; |
| e->nodeid = nodeid; |
| memcpy(&e->request, ms, le16_to_cpu(ms->m_header.h_length)); |
| |
| atomic_inc(&ls->ls_requestqueue_cnt); |
| mutex_lock(&ls->ls_requestqueue_mutex); |
| list_add_tail(&e->list, &ls->ls_requestqueue); |
| mutex_unlock(&ls->ls_requestqueue_mutex); |
| } |
| |
| /* |
| * Called by dlm_recoverd to process normal messages saved while recovery was |
| * happening. Normal locking has been enabled before this is called. dlm_recv |
| * upon receiving a message, will wait for all saved messages to be drained |
| * here before processing the message it got. If a new dlm_ls_stop() arrives |
| * while we're processing these saved messages, it may block trying to suspend |
| * dlm_recv if dlm_recv is waiting for us in dlm_wait_requestqueue. In that |
| * case, we don't abort since locking_stopped is still 0. If dlm_recv is not |
| * waiting for us, then this processing may be aborted due to locking_stopped. |
| */ |
| |
| int dlm_process_requestqueue(struct dlm_ls *ls) |
| { |
| struct rq_entry *e; |
| struct dlm_message *ms; |
| int error = 0; |
| |
| mutex_lock(&ls->ls_requestqueue_mutex); |
| |
| for (;;) { |
| if (list_empty(&ls->ls_requestqueue)) { |
| mutex_unlock(&ls->ls_requestqueue_mutex); |
| error = 0; |
| break; |
| } |
| e = list_entry(ls->ls_requestqueue.next, struct rq_entry, list); |
| mutex_unlock(&ls->ls_requestqueue_mutex); |
| |
| ms = &e->request; |
| |
| log_limit(ls, "dlm_process_requestqueue msg %d from %d " |
| "lkid %x remid %x result %d seq %u", |
| le32_to_cpu(ms->m_type), |
| le32_to_cpu(ms->m_header.h_nodeid), |
| le32_to_cpu(ms->m_lkid), le32_to_cpu(ms->m_remid), |
| from_dlm_errno(le32_to_cpu(ms->m_result)), |
| e->recover_seq); |
| |
| dlm_receive_message_saved(ls, &e->request, e->recover_seq); |
| |
| mutex_lock(&ls->ls_requestqueue_mutex); |
| list_del(&e->list); |
| if (atomic_dec_and_test(&ls->ls_requestqueue_cnt)) |
| wake_up(&ls->ls_requestqueue_wait); |
| kfree(e); |
| |
| if (dlm_locking_stopped(ls)) { |
| log_debug(ls, "process_requestqueue abort running"); |
| mutex_unlock(&ls->ls_requestqueue_mutex); |
| error = -EINTR; |
| break; |
| } |
| schedule(); |
| } |
| |
| return error; |
| } |
| |
| /* |
| * After recovery is done, locking is resumed and dlm_recoverd takes all the |
| * saved requests and processes them as they would have been by dlm_recv. At |
| * the same time, dlm_recv will start receiving new requests from remote nodes. |
| * We want to delay dlm_recv processing new requests until dlm_recoverd has |
| * finished processing the old saved requests. We don't check for locking |
| * stopped here because dlm_ls_stop won't stop locking until it's suspended us |
| * (dlm_recv). |
| */ |
| |
| void dlm_wait_requestqueue(struct dlm_ls *ls) |
| { |
| wait_event(ls->ls_requestqueue_wait, |
| atomic_read(&ls->ls_requestqueue_cnt) == 0); |
| } |
| |
| static int purge_request(struct dlm_ls *ls, struct dlm_message *ms, int nodeid) |
| { |
| __le32 type = ms->m_type; |
| |
| /* the ls is being cleaned up and freed by release_lockspace */ |
| if (!atomic_read(&ls->ls_count)) |
| return 1; |
| |
| if (dlm_is_removed(ls, nodeid)) |
| return 1; |
| |
| /* directory operations are always purged because the directory is |
| always rebuilt during recovery and the lookups resent */ |
| |
| if (type == cpu_to_le32(DLM_MSG_REMOVE) || |
| type == cpu_to_le32(DLM_MSG_LOOKUP) || |
| type == cpu_to_le32(DLM_MSG_LOOKUP_REPLY)) |
| return 1; |
| |
| if (!dlm_no_directory(ls)) |
| return 0; |
| |
| return 1; |
| } |
| |
| void dlm_purge_requestqueue(struct dlm_ls *ls) |
| { |
| struct dlm_message *ms; |
| struct rq_entry *e, *safe; |
| |
| mutex_lock(&ls->ls_requestqueue_mutex); |
| list_for_each_entry_safe(e, safe, &ls->ls_requestqueue, list) { |
| ms = &e->request; |
| |
| if (purge_request(ls, ms, e->nodeid)) { |
| list_del(&e->list); |
| if (atomic_dec_and_test(&ls->ls_requestqueue_cnt)) |
| wake_up(&ls->ls_requestqueue_wait); |
| kfree(e); |
| } |
| } |
| mutex_unlock(&ls->ls_requestqueue_mutex); |
| } |
| |