| /* |
| * linux/drivers/video/omap2/omapfb-ioctl.c |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * Some code and ideas taken from drivers/video/omap/ driver |
| * by Imre Deak. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/fb.h> |
| #include <linux/device.h> |
| #include <linux/uaccess.h> |
| #include <linux/platform_device.h> |
| #include <linux/mm.h> |
| #include <linux/omapfb.h> |
| #include <linux/vmalloc.h> |
| |
| #include <plat/display.h> |
| #include <plat/vrfb.h> |
| #include <plat/vram.h> |
| |
| #include "omapfb.h" |
| |
| static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omap_overlay *ovl; |
| struct omap_overlay_info info; |
| int r = 0; |
| |
| DBG("omapfb_setup_plane\n"); |
| |
| if (ofbi->num_overlays != 1) { |
| r = -EINVAL; |
| goto out; |
| } |
| |
| /* XXX uses only the first overlay */ |
| ovl = ofbi->overlays[0]; |
| |
| if (pi->enabled && !ofbi->region.size) { |
| /* |
| * This plane's memory was freed, can't enable it |
| * until it's reallocated. |
| */ |
| r = -EINVAL; |
| goto out; |
| } |
| |
| ovl->get_overlay_info(ovl, &info); |
| |
| info.pos_x = pi->pos_x; |
| info.pos_y = pi->pos_y; |
| info.out_width = pi->out_width; |
| info.out_height = pi->out_height; |
| info.enabled = pi->enabled; |
| |
| r = ovl->set_overlay_info(ovl, &info); |
| if (r) |
| goto out; |
| |
| if (ovl->manager) { |
| r = ovl->manager->apply(ovl->manager); |
| if (r) |
| goto out; |
| } |
| |
| out: |
| if (r) |
| dev_err(fbdev->dev, "setup_plane failed\n"); |
| return r; |
| } |
| |
| static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| |
| if (ofbi->num_overlays != 1) { |
| memset(pi, 0, sizeof(*pi)); |
| } else { |
| struct omap_overlay_info *ovli; |
| struct omap_overlay *ovl; |
| |
| ovl = ofbi->overlays[0]; |
| ovli = &ovl->info; |
| |
| pi->pos_x = ovli->pos_x; |
| pi->pos_y = ovli->pos_y; |
| pi->enabled = ovli->enabled; |
| pi->channel_out = 0; /* xxx */ |
| pi->mirror = 0; |
| pi->out_width = ovli->out_width; |
| pi->out_height = ovli->out_height; |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omapfb2_mem_region *rg; |
| int r, i; |
| size_t size; |
| |
| if (mi->type > OMAPFB_MEMTYPE_MAX) |
| return -EINVAL; |
| |
| size = PAGE_ALIGN(mi->size); |
| |
| rg = &ofbi->region; |
| |
| for (i = 0; i < ofbi->num_overlays; i++) { |
| if (ofbi->overlays[i]->info.enabled) |
| return -EBUSY; |
| } |
| |
| if (rg->size != size || rg->type != mi->type) { |
| r = omapfb_realloc_fbmem(fbi, size, mi->type); |
| if (r) { |
| dev_err(fbdev->dev, "realloc fbmem failed\n"); |
| return r; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_mem_region *rg; |
| |
| rg = &ofbi->region; |
| memset(mi, 0, sizeof(*mi)); |
| |
| mi->size = rg->size; |
| mi->type = rg->type; |
| |
| return 0; |
| } |
| |
| static int omapfb_update_window_nolock(struct fb_info *fbi, |
| u32 x, u32 y, u32 w, u32 h) |
| { |
| struct omap_dss_device *display = fb2display(fbi); |
| u16 dw, dh; |
| |
| if (!display) |
| return 0; |
| |
| if (w == 0 || h == 0) |
| return 0; |
| |
| display->get_resolution(display, &dw, &dh); |
| |
| if (x + w > dw || y + h > dh) |
| return -EINVAL; |
| |
| return display->update(display, x, y, w, h); |
| } |
| |
| /* This function is exported for SGX driver use */ |
| int omapfb_update_window(struct fb_info *fbi, |
| u32 x, u32 y, u32 w, u32 h) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| int r; |
| |
| omapfb_lock(fbdev); |
| lock_fb_info(fbi); |
| |
| r = omapfb_update_window_nolock(fbi, x, y, w, h); |
| |
| unlock_fb_info(fbi); |
| omapfb_unlock(fbdev); |
| |
| return r; |
| } |
| EXPORT_SYMBOL(omapfb_update_window); |
| |
| static int omapfb_set_update_mode(struct fb_info *fbi, |
| enum omapfb_update_mode mode) |
| { |
| struct omap_dss_device *display = fb2display(fbi); |
| enum omap_dss_update_mode um; |
| int r; |
| |
| if (!display || !display->set_update_mode) |
| return -EINVAL; |
| |
| switch (mode) { |
| case OMAPFB_UPDATE_DISABLED: |
| um = OMAP_DSS_UPDATE_DISABLED; |
| break; |
| |
| case OMAPFB_AUTO_UPDATE: |
| um = OMAP_DSS_UPDATE_AUTO; |
| break; |
| |
| case OMAPFB_MANUAL_UPDATE: |
| um = OMAP_DSS_UPDATE_MANUAL; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| r = display->set_update_mode(display, um); |
| |
| return r; |
| } |
| |
| static int omapfb_get_update_mode(struct fb_info *fbi, |
| enum omapfb_update_mode *mode) |
| { |
| struct omap_dss_device *display = fb2display(fbi); |
| enum omap_dss_update_mode m; |
| |
| if (!display || !display->get_update_mode) |
| return -EINVAL; |
| |
| m = display->get_update_mode(display); |
| |
| switch (m) { |
| case OMAP_DSS_UPDATE_DISABLED: |
| *mode = OMAPFB_UPDATE_DISABLED; |
| break; |
| case OMAP_DSS_UPDATE_AUTO: |
| *mode = OMAPFB_AUTO_UPDATE; |
| break; |
| case OMAP_DSS_UPDATE_MANUAL: |
| *mode = OMAPFB_MANUAL_UPDATE; |
| break; |
| default: |
| BUG(); |
| } |
| |
| return 0; |
| } |
| |
| /* XXX this color key handling is a hack... */ |
| static struct omapfb_color_key omapfb_color_keys[2]; |
| |
| static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, |
| struct omapfb_color_key *ck) |
| { |
| struct omap_overlay_manager_info info; |
| enum omap_dss_trans_key_type kt; |
| int r; |
| |
| mgr->get_manager_info(mgr, &info); |
| |
| if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) { |
| info.trans_enabled = false; |
| omapfb_color_keys[mgr->id] = *ck; |
| |
| r = mgr->set_manager_info(mgr, &info); |
| if (r) |
| return r; |
| |
| r = mgr->apply(mgr); |
| |
| return r; |
| } |
| |
| switch (ck->key_type) { |
| case OMAPFB_COLOR_KEY_GFX_DST: |
| kt = OMAP_DSS_COLOR_KEY_GFX_DST; |
| break; |
| case OMAPFB_COLOR_KEY_VID_SRC: |
| kt = OMAP_DSS_COLOR_KEY_VID_SRC; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| info.default_color = ck->background; |
| info.trans_key = ck->trans_key; |
| info.trans_key_type = kt; |
| info.trans_enabled = true; |
| |
| omapfb_color_keys[mgr->id] = *ck; |
| |
| r = mgr->set_manager_info(mgr, &info); |
| if (r) |
| return r; |
| |
| r = mgr->apply(mgr); |
| |
| return r; |
| } |
| |
| static int omapfb_set_color_key(struct fb_info *fbi, |
| struct omapfb_color_key *ck) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| int r; |
| int i; |
| struct omap_overlay_manager *mgr = NULL; |
| |
| omapfb_lock(fbdev); |
| |
| for (i = 0; i < ofbi->num_overlays; i++) { |
| if (ofbi->overlays[i]->manager) { |
| mgr = ofbi->overlays[i]->manager; |
| break; |
| } |
| } |
| |
| if (!mgr) { |
| r = -EINVAL; |
| goto err; |
| } |
| |
| r = _omapfb_set_color_key(mgr, ck); |
| err: |
| omapfb_unlock(fbdev); |
| |
| return r; |
| } |
| |
| static int omapfb_get_color_key(struct fb_info *fbi, |
| struct omapfb_color_key *ck) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omap_overlay_manager *mgr = NULL; |
| int r = 0; |
| int i; |
| |
| omapfb_lock(fbdev); |
| |
| for (i = 0; i < ofbi->num_overlays; i++) { |
| if (ofbi->overlays[i]->manager) { |
| mgr = ofbi->overlays[i]->manager; |
| break; |
| } |
| } |
| |
| if (!mgr) { |
| r = -EINVAL; |
| goto err; |
| } |
| |
| *ck = omapfb_color_keys[mgr->id]; |
| err: |
| omapfb_unlock(fbdev); |
| |
| return r; |
| } |
| |
| static int omapfb_memory_read(struct fb_info *fbi, |
| struct omapfb_memory_read *mr) |
| { |
| struct omap_dss_device *display = fb2display(fbi); |
| void *buf; |
| int r; |
| |
| if (!display || !display->memory_read) |
| return -ENOENT; |
| |
| if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size)) |
| return -EFAULT; |
| |
| if (mr->w * mr->h * 3 > mr->buffer_size) |
| return -EINVAL; |
| |
| buf = vmalloc(mr->buffer_size); |
| if (!buf) { |
| DBG("vmalloc failed\n"); |
| return -ENOMEM; |
| } |
| |
| r = display->memory_read(display, buf, mr->buffer_size, |
| mr->x, mr->y, mr->w, mr->h); |
| |
| if (r > 0) { |
| if (copy_to_user(mr->buffer, buf, mr->buffer_size)) |
| r = -EFAULT; |
| } |
| |
| vfree(buf); |
| |
| return r; |
| } |
| |
| static int omapfb_get_ovl_colormode(struct omapfb2_device *fbdev, |
| struct omapfb_ovl_colormode *mode) |
| { |
| int ovl_idx = mode->overlay_idx; |
| int mode_idx = mode->mode_idx; |
| struct omap_overlay *ovl; |
| enum omap_color_mode supported_modes; |
| struct fb_var_screeninfo var; |
| int i; |
| |
| if (ovl_idx >= fbdev->num_overlays) |
| return -ENODEV; |
| ovl = fbdev->overlays[ovl_idx]; |
| supported_modes = ovl->supported_modes; |
| |
| mode_idx = mode->mode_idx; |
| |
| for (i = 0; i < sizeof(supported_modes) * 8; i++) { |
| if (!(supported_modes & (1 << i))) |
| continue; |
| /* |
| * It's possible that the FB doesn't support a mode |
| * that is supported by the overlay, so call the |
| * following here. |
| */ |
| if (dss_mode_to_fb_mode(1 << i, &var) < 0) |
| continue; |
| |
| mode_idx--; |
| if (mode_idx < 0) |
| break; |
| } |
| |
| if (i == sizeof(supported_modes) * 8) |
| return -ENOENT; |
| |
| mode->bits_per_pixel = var.bits_per_pixel; |
| mode->nonstd = var.nonstd; |
| mode->red = var.red; |
| mode->green = var.green; |
| mode->blue = var.blue; |
| mode->transp = var.transp; |
| |
| return 0; |
| } |
| |
| static int omapfb_wait_for_go(struct fb_info *fbi) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| int r = 0; |
| int i; |
| |
| for (i = 0; i < ofbi->num_overlays; ++i) { |
| struct omap_overlay *ovl = ofbi->overlays[i]; |
| r = ovl->wait_for_go(ovl); |
| if (r) |
| break; |
| } |
| |
| return r; |
| } |
| |
| int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) |
| { |
| struct omapfb_info *ofbi = FB2OFB(fbi); |
| struct omapfb2_device *fbdev = ofbi->fbdev; |
| struct omap_dss_device *display = fb2display(fbi); |
| |
| union { |
| struct omapfb_update_window_old uwnd_o; |
| struct omapfb_update_window uwnd; |
| struct omapfb_plane_info plane_info; |
| struct omapfb_caps caps; |
| struct omapfb_mem_info mem_info; |
| struct omapfb_color_key color_key; |
| struct omapfb_ovl_colormode ovl_colormode; |
| enum omapfb_update_mode update_mode; |
| int test_num; |
| struct omapfb_memory_read memory_read; |
| struct omapfb_vram_info vram_info; |
| struct omapfb_tearsync_info tearsync_info; |
| } p; |
| |
| int r = 0; |
| |
| switch (cmd) { |
| case OMAPFB_SYNC_GFX: |
| DBG("ioctl SYNC_GFX\n"); |
| if (!display || !display->sync) { |
| /* DSS1 never returns an error here, so we neither */ |
| /*r = -EINVAL;*/ |
| break; |
| } |
| |
| r = display->sync(display); |
| break; |
| |
| case OMAPFB_UPDATE_WINDOW_OLD: |
| DBG("ioctl UPDATE_WINDOW_OLD\n"); |
| if (!display || !display->update) { |
| r = -EINVAL; |
| break; |
| } |
| |
| if (copy_from_user(&p.uwnd_o, |
| (void __user *)arg, |
| sizeof(p.uwnd_o))) { |
| r = -EFAULT; |
| break; |
| } |
| |
| r = omapfb_update_window_nolock(fbi, p.uwnd_o.x, p.uwnd_o.y, |
| p.uwnd_o.width, p.uwnd_o.height); |
| break; |
| |
| case OMAPFB_UPDATE_WINDOW: |
| DBG("ioctl UPDATE_WINDOW\n"); |
| if (!display || !display->update) { |
| r = -EINVAL; |
| break; |
| } |
| |
| if (copy_from_user(&p.uwnd, (void __user *)arg, |
| sizeof(p.uwnd))) { |
| r = -EFAULT; |
| break; |
| } |
| |
| r = omapfb_update_window_nolock(fbi, p.uwnd.x, p.uwnd.y, |
| p.uwnd.width, p.uwnd.height); |
| break; |
| |
| case OMAPFB_SETUP_PLANE: |
| DBG("ioctl SETUP_PLANE\n"); |
| if (copy_from_user(&p.plane_info, (void __user *)arg, |
| sizeof(p.plane_info))) |
| r = -EFAULT; |
| else |
| r = omapfb_setup_plane(fbi, &p.plane_info); |
| break; |
| |
| case OMAPFB_QUERY_PLANE: |
| DBG("ioctl QUERY_PLANE\n"); |
| r = omapfb_query_plane(fbi, &p.plane_info); |
| if (r < 0) |
| break; |
| if (copy_to_user((void __user *)arg, &p.plane_info, |
| sizeof(p.plane_info))) |
| r = -EFAULT; |
| break; |
| |
| case OMAPFB_SETUP_MEM: |
| DBG("ioctl SETUP_MEM\n"); |
| if (copy_from_user(&p.mem_info, (void __user *)arg, |
| sizeof(p.mem_info))) |
| r = -EFAULT; |
| else |
| r = omapfb_setup_mem(fbi, &p.mem_info); |
| break; |
| |
| case OMAPFB_QUERY_MEM: |
| DBG("ioctl QUERY_MEM\n"); |
| r = omapfb_query_mem(fbi, &p.mem_info); |
| if (r < 0) |
| break; |
| if (copy_to_user((void __user *)arg, &p.mem_info, |
| sizeof(p.mem_info))) |
| r = -EFAULT; |
| break; |
| |
| case OMAPFB_GET_CAPS: |
| DBG("ioctl GET_CAPS\n"); |
| if (!display) { |
| r = -EINVAL; |
| break; |
| } |
| |
| memset(&p.caps, 0, sizeof(p.caps)); |
| if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) |
| p.caps.ctrl |= OMAPFB_CAPS_MANUAL_UPDATE; |
| if (display->caps & OMAP_DSS_DISPLAY_CAP_TEAR_ELIM) |
| p.caps.ctrl |= OMAPFB_CAPS_TEARSYNC; |
| |
| if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) |
| r = -EFAULT; |
| break; |
| |
| case OMAPFB_GET_OVERLAY_COLORMODE: |
| DBG("ioctl GET_OVERLAY_COLORMODE\n"); |
| if (copy_from_user(&p.ovl_colormode, (void __user *)arg, |
| sizeof(p.ovl_colormode))) { |
| r = -EFAULT; |
| break; |
| } |
| r = omapfb_get_ovl_colormode(fbdev, &p.ovl_colormode); |
| if (r < 0) |
| break; |
| if (copy_to_user((void __user *)arg, &p.ovl_colormode, |
| sizeof(p.ovl_colormode))) |
| r = -EFAULT; |
| break; |
| |
| case OMAPFB_SET_UPDATE_MODE: |
| DBG("ioctl SET_UPDATE_MODE\n"); |
| if (get_user(p.update_mode, (int __user *)arg)) |
| r = -EFAULT; |
| else |
| r = omapfb_set_update_mode(fbi, p.update_mode); |
| break; |
| |
| case OMAPFB_GET_UPDATE_MODE: |
| DBG("ioctl GET_UPDATE_MODE\n"); |
| r = omapfb_get_update_mode(fbi, &p.update_mode); |
| if (r) |
| break; |
| if (put_user(p.update_mode, |
| (enum omapfb_update_mode __user *)arg)) |
| r = -EFAULT; |
| break; |
| |
| case OMAPFB_SET_COLOR_KEY: |
| DBG("ioctl SET_COLOR_KEY\n"); |
| if (copy_from_user(&p.color_key, (void __user *)arg, |
| sizeof(p.color_key))) |
| r = -EFAULT; |
| else |
| r = omapfb_set_color_key(fbi, &p.color_key); |
| break; |
| |
| case OMAPFB_GET_COLOR_KEY: |
| DBG("ioctl GET_COLOR_KEY\n"); |
| r = omapfb_get_color_key(fbi, &p.color_key); |
| if (r) |
| break; |
| if (copy_to_user((void __user *)arg, &p.color_key, |
| sizeof(p.color_key))) |
| r = -EFAULT; |
| break; |
| |
| case OMAPFB_WAITFORVSYNC: |
| DBG("ioctl WAITFORVSYNC\n"); |
| if (!display) { |
| r = -EINVAL; |
| break; |
| } |
| |
| r = display->wait_vsync(display); |
| break; |
| |
| case OMAPFB_WAITFORGO: |
| DBG("ioctl WAITFORGO\n"); |
| if (!display) { |
| r = -EINVAL; |
| break; |
| } |
| |
| r = omapfb_wait_for_go(fbi); |
| break; |
| |
| /* LCD and CTRL tests do the same thing for backward |
| * compatibility */ |
| case OMAPFB_LCD_TEST: |
| DBG("ioctl LCD_TEST\n"); |
| if (get_user(p.test_num, (int __user *)arg)) { |
| r = -EFAULT; |
| break; |
| } |
| if (!display || !display->run_test) { |
| r = -EINVAL; |
| break; |
| } |
| |
| r = display->run_test(display, p.test_num); |
| |
| break; |
| |
| case OMAPFB_CTRL_TEST: |
| DBG("ioctl CTRL_TEST\n"); |
| if (get_user(p.test_num, (int __user *)arg)) { |
| r = -EFAULT; |
| break; |
| } |
| if (!display || !display->run_test) { |
| r = -EINVAL; |
| break; |
| } |
| |
| r = display->run_test(display, p.test_num); |
| |
| break; |
| |
| case OMAPFB_MEMORY_READ: |
| DBG("ioctl MEMORY_READ\n"); |
| |
| if (copy_from_user(&p.memory_read, (void __user *)arg, |
| sizeof(p.memory_read))) { |
| r = -EFAULT; |
| break; |
| } |
| |
| r = omapfb_memory_read(fbi, &p.memory_read); |
| |
| break; |
| |
| case OMAPFB_GET_VRAM_INFO: { |
| unsigned long vram, free, largest; |
| |
| DBG("ioctl GET_VRAM_INFO\n"); |
| |
| omap_vram_get_info(&vram, &free, &largest); |
| p.vram_info.total = vram; |
| p.vram_info.free = free; |
| p.vram_info.largest_free_block = largest; |
| |
| if (copy_to_user((void __user *)arg, &p.vram_info, |
| sizeof(p.vram_info))) |
| r = -EFAULT; |
| break; |
| } |
| |
| case OMAPFB_SET_TEARSYNC: { |
| DBG("ioctl SET_TEARSYNC\n"); |
| |
| if (copy_from_user(&p.tearsync_info, (void __user *)arg, |
| sizeof(p.tearsync_info))) { |
| r = -EFAULT; |
| break; |
| } |
| |
| if (!display->enable_te) { |
| r = -ENODEV; |
| break; |
| } |
| |
| r = display->enable_te(display, !!p.tearsync_info.enabled); |
| |
| break; |
| } |
| |
| default: |
| dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd); |
| r = -EINVAL; |
| } |
| |
| if (r < 0) |
| DBG("ioctl failed: %d\n", r); |
| |
| return r; |
| } |
| |
| |