| /* Intel Ethernet Switch Host Interface Driver |
| * Copyright(c) 2013 - 2015 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/aer.h> |
| |
| #include "fm10k.h" |
| |
| static const struct fm10k_info *fm10k_info_tbl[] = { |
| [fm10k_device_pf] = &fm10k_pf_info, |
| [fm10k_device_vf] = &fm10k_vf_info, |
| }; |
| |
| /** |
| * fm10k_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static const struct pci_device_id fm10k_pci_tbl[] = { |
| { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf }, |
| { PCI_VDEVICE(INTEL, FM10K_DEV_ID_VF), fm10k_device_vf }, |
| /* required last entry */ |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, fm10k_pci_tbl); |
| |
| u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg) |
| { |
| struct fm10k_intfc *interface = hw->back; |
| u16 value = 0; |
| |
| if (FM10K_REMOVED(hw->hw_addr)) |
| return ~value; |
| |
| pci_read_config_word(interface->pdev, reg, &value); |
| if (value == 0xFFFF) |
| fm10k_write_flush(hw); |
| |
| return value; |
| } |
| |
| u32 fm10k_read_reg(struct fm10k_hw *hw, int reg) |
| { |
| u32 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr); |
| u32 value = 0; |
| |
| if (FM10K_REMOVED(hw_addr)) |
| return ~value; |
| |
| value = readl(&hw_addr[reg]); |
| if (!(~value) && (!reg || !(~readl(hw_addr)))) { |
| struct fm10k_intfc *interface = hw->back; |
| struct net_device *netdev = interface->netdev; |
| |
| hw->hw_addr = NULL; |
| netif_device_detach(netdev); |
| netdev_err(netdev, "PCIe link lost, device now detached\n"); |
| } |
| |
| return value; |
| } |
| |
| static int fm10k_hw_ready(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| |
| fm10k_write_flush(hw); |
| |
| return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0; |
| } |
| |
| void fm10k_service_event_schedule(struct fm10k_intfc *interface) |
| { |
| if (!test_bit(__FM10K_SERVICE_DISABLE, &interface->state) && |
| !test_and_set_bit(__FM10K_SERVICE_SCHED, &interface->state)) |
| queue_work(fm10k_workqueue, &interface->service_task); |
| } |
| |
| static void fm10k_service_event_complete(struct fm10k_intfc *interface) |
| { |
| BUG_ON(!test_bit(__FM10K_SERVICE_SCHED, &interface->state)); |
| |
| /* flush memory to make sure state is correct before next watchog */ |
| smp_mb__before_atomic(); |
| clear_bit(__FM10K_SERVICE_SCHED, &interface->state); |
| } |
| |
| /** |
| * fm10k_service_timer - Timer Call-back |
| * @data: pointer to interface cast into an unsigned long |
| **/ |
| static void fm10k_service_timer(unsigned long data) |
| { |
| struct fm10k_intfc *interface = (struct fm10k_intfc *)data; |
| |
| /* Reset the timer */ |
| mod_timer(&interface->service_timer, (HZ * 2) + jiffies); |
| |
| fm10k_service_event_schedule(interface); |
| } |
| |
| static void fm10k_detach_subtask(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| |
| /* do nothing if device is still present or hw_addr is set */ |
| if (netif_device_present(netdev) || interface->hw.hw_addr) |
| return; |
| |
| rtnl_lock(); |
| |
| if (netif_running(netdev)) |
| dev_close(netdev); |
| |
| rtnl_unlock(); |
| } |
| |
| static void fm10k_reinit(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| int err; |
| |
| WARN_ON(in_interrupt()); |
| |
| /* put off any impending NetWatchDogTimeout */ |
| netdev->trans_start = jiffies; |
| |
| while (test_and_set_bit(__FM10K_RESETTING, &interface->state)) |
| usleep_range(1000, 2000); |
| |
| rtnl_lock(); |
| |
| fm10k_iov_suspend(interface->pdev); |
| |
| if (netif_running(netdev)) |
| fm10k_close(netdev); |
| |
| fm10k_mbx_free_irq(interface); |
| |
| /* delay any future reset requests */ |
| interface->last_reset = jiffies + (10 * HZ); |
| |
| /* reset and initialize the hardware so it is in a known state */ |
| err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw); |
| if (err) |
| dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err); |
| |
| /* reassociate interrupts */ |
| fm10k_mbx_request_irq(interface); |
| |
| /* reset clock */ |
| fm10k_ts_reset(interface); |
| |
| if (netif_running(netdev)) |
| fm10k_open(netdev); |
| |
| fm10k_iov_resume(interface->pdev); |
| |
| rtnl_unlock(); |
| |
| clear_bit(__FM10K_RESETTING, &interface->state); |
| } |
| |
| static void fm10k_reset_subtask(struct fm10k_intfc *interface) |
| { |
| if (!(interface->flags & FM10K_FLAG_RESET_REQUESTED)) |
| return; |
| |
| interface->flags &= ~FM10K_FLAG_RESET_REQUESTED; |
| |
| netdev_err(interface->netdev, "Reset interface\n"); |
| |
| fm10k_reinit(interface); |
| } |
| |
| /** |
| * fm10k_configure_swpri_map - Configure Receive SWPRI to PC mapping |
| * @interface: board private structure |
| * |
| * Configure the SWPRI to PC mapping for the port. |
| **/ |
| static void fm10k_configure_swpri_map(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| int i; |
| |
| /* clear flag indicating update is needed */ |
| interface->flags &= ~FM10K_FLAG_SWPRI_CONFIG; |
| |
| /* these registers are only available on the PF */ |
| if (hw->mac.type != fm10k_mac_pf) |
| return; |
| |
| /* configure SWPRI to PC map */ |
| for (i = 0; i < FM10K_SWPRI_MAX; i++) |
| fm10k_write_reg(hw, FM10K_SWPRI_MAP(i), |
| netdev_get_prio_tc_map(netdev, i)); |
| } |
| |
| /** |
| * fm10k_watchdog_update_host_state - Update the link status based on host. |
| * @interface: board private structure |
| **/ |
| static void fm10k_watchdog_update_host_state(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| s32 err; |
| |
| if (test_bit(__FM10K_LINK_DOWN, &interface->state)) { |
| interface->host_ready = false; |
| if (time_is_after_jiffies(interface->link_down_event)) |
| return; |
| clear_bit(__FM10K_LINK_DOWN, &interface->state); |
| } |
| |
| if (interface->flags & FM10K_FLAG_SWPRI_CONFIG) { |
| if (rtnl_trylock()) { |
| fm10k_configure_swpri_map(interface); |
| rtnl_unlock(); |
| } |
| } |
| |
| /* lock the mailbox for transmit and receive */ |
| fm10k_mbx_lock(interface); |
| |
| err = hw->mac.ops.get_host_state(hw, &interface->host_ready); |
| if (err && time_is_before_jiffies(interface->last_reset)) |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| |
| /* free the lock */ |
| fm10k_mbx_unlock(interface); |
| } |
| |
| /** |
| * fm10k_mbx_subtask - Process upstream and downstream mailboxes |
| * @interface: board private structure |
| * |
| * This function will process both the upstream and downstream mailboxes. |
| * It is necessary for us to hold the rtnl_lock while doing this as the |
| * mailbox accesses are protected by this lock. |
| **/ |
| static void fm10k_mbx_subtask(struct fm10k_intfc *interface) |
| { |
| /* process upstream mailbox and update device state */ |
| fm10k_watchdog_update_host_state(interface); |
| |
| /* process downstream mailboxes */ |
| fm10k_iov_mbx(interface); |
| } |
| |
| /** |
| * fm10k_watchdog_host_is_ready - Update netdev status based on host ready |
| * @interface: board private structure |
| **/ |
| static void fm10k_watchdog_host_is_ready(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| |
| /* only continue if link state is currently down */ |
| if (netif_carrier_ok(netdev)) |
| return; |
| |
| netif_info(interface, drv, netdev, "NIC Link is up\n"); |
| |
| netif_carrier_on(netdev); |
| netif_tx_wake_all_queues(netdev); |
| } |
| |
| /** |
| * fm10k_watchdog_host_not_ready - Update netdev status based on host not ready |
| * @interface: board private structure |
| **/ |
| static void fm10k_watchdog_host_not_ready(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| |
| /* only continue if link state is currently up */ |
| if (!netif_carrier_ok(netdev)) |
| return; |
| |
| netif_info(interface, drv, netdev, "NIC Link is down\n"); |
| |
| netif_carrier_off(netdev); |
| netif_tx_stop_all_queues(netdev); |
| } |
| |
| /** |
| * fm10k_update_stats - Update the board statistics counters. |
| * @interface: board private structure |
| **/ |
| void fm10k_update_stats(struct fm10k_intfc *interface) |
| { |
| struct net_device_stats *net_stats = &interface->netdev->stats; |
| struct fm10k_hw *hw = &interface->hw; |
| u64 rx_errors = 0, rx_csum_errors = 0, tx_csum_errors = 0; |
| u64 restart_queue = 0, tx_busy = 0, alloc_failed = 0; |
| u64 rx_bytes_nic = 0, rx_pkts_nic = 0, rx_drops_nic = 0; |
| u64 tx_bytes_nic = 0, tx_pkts_nic = 0; |
| u64 bytes, pkts; |
| int i; |
| |
| /* do not allow stats update via service task for next second */ |
| interface->next_stats_update = jiffies + HZ; |
| |
| /* gather some stats to the interface struct that are per queue */ |
| for (bytes = 0, pkts = 0, i = 0; i < interface->num_tx_queues; i++) { |
| struct fm10k_ring *tx_ring = interface->tx_ring[i]; |
| |
| restart_queue += tx_ring->tx_stats.restart_queue; |
| tx_busy += tx_ring->tx_stats.tx_busy; |
| tx_csum_errors += tx_ring->tx_stats.csum_err; |
| bytes += tx_ring->stats.bytes; |
| pkts += tx_ring->stats.packets; |
| } |
| |
| interface->restart_queue = restart_queue; |
| interface->tx_busy = tx_busy; |
| net_stats->tx_bytes = bytes; |
| net_stats->tx_packets = pkts; |
| interface->tx_csum_errors = tx_csum_errors; |
| /* gather some stats to the interface struct that are per queue */ |
| for (bytes = 0, pkts = 0, i = 0; i < interface->num_rx_queues; i++) { |
| struct fm10k_ring *rx_ring = interface->rx_ring[i]; |
| |
| bytes += rx_ring->stats.bytes; |
| pkts += rx_ring->stats.packets; |
| alloc_failed += rx_ring->rx_stats.alloc_failed; |
| rx_csum_errors += rx_ring->rx_stats.csum_err; |
| rx_errors += rx_ring->rx_stats.errors; |
| } |
| |
| net_stats->rx_bytes = bytes; |
| net_stats->rx_packets = pkts; |
| interface->alloc_failed = alloc_failed; |
| interface->rx_csum_errors = rx_csum_errors; |
| |
| hw->mac.ops.update_hw_stats(hw, &interface->stats); |
| |
| for (i = 0; i < hw->mac.max_queues; i++) { |
| struct fm10k_hw_stats_q *q = &interface->stats.q[i]; |
| |
| tx_bytes_nic += q->tx_bytes.count; |
| tx_pkts_nic += q->tx_packets.count; |
| rx_bytes_nic += q->rx_bytes.count; |
| rx_pkts_nic += q->rx_packets.count; |
| rx_drops_nic += q->rx_drops.count; |
| } |
| |
| interface->tx_bytes_nic = tx_bytes_nic; |
| interface->tx_packets_nic = tx_pkts_nic; |
| interface->rx_bytes_nic = rx_bytes_nic; |
| interface->rx_packets_nic = rx_pkts_nic; |
| interface->rx_drops_nic = rx_drops_nic; |
| |
| /* Fill out the OS statistics structure */ |
| net_stats->rx_errors = rx_errors; |
| net_stats->rx_dropped = interface->stats.nodesc_drop.count; |
| } |
| |
| /** |
| * fm10k_watchdog_flush_tx - flush queues on host not ready |
| * @interface - pointer to the device interface structure |
| **/ |
| static void fm10k_watchdog_flush_tx(struct fm10k_intfc *interface) |
| { |
| int some_tx_pending = 0; |
| int i; |
| |
| /* nothing to do if carrier is up */ |
| if (netif_carrier_ok(interface->netdev)) |
| return; |
| |
| for (i = 0; i < interface->num_tx_queues; i++) { |
| struct fm10k_ring *tx_ring = interface->tx_ring[i]; |
| |
| if (tx_ring->next_to_use != tx_ring->next_to_clean) { |
| some_tx_pending = 1; |
| break; |
| } |
| } |
| |
| /* We've lost link, so the controller stops DMA, but we've got |
| * queued Tx work that's never going to get done, so reset |
| * controller to flush Tx. |
| */ |
| if (some_tx_pending) |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| } |
| |
| /** |
| * fm10k_watchdog_subtask - check and bring link up |
| * @interface - pointer to the device interface structure |
| **/ |
| static void fm10k_watchdog_subtask(struct fm10k_intfc *interface) |
| { |
| /* if interface is down do nothing */ |
| if (test_bit(__FM10K_DOWN, &interface->state) || |
| test_bit(__FM10K_RESETTING, &interface->state)) |
| return; |
| |
| if (interface->host_ready) |
| fm10k_watchdog_host_is_ready(interface); |
| else |
| fm10k_watchdog_host_not_ready(interface); |
| |
| /* update stats only once every second */ |
| if (time_is_before_jiffies(interface->next_stats_update)) |
| fm10k_update_stats(interface); |
| |
| /* flush any uncompleted work */ |
| fm10k_watchdog_flush_tx(interface); |
| } |
| |
| /** |
| * fm10k_check_hang_subtask - check for hung queues and dropped interrupts |
| * @interface - pointer to the device interface structure |
| * |
| * This function serves two purposes. First it strobes the interrupt lines |
| * in order to make certain interrupts are occurring. Secondly it sets the |
| * bits needed to check for TX hangs. As a result we should immediately |
| * determine if a hang has occurred. |
| */ |
| static void fm10k_check_hang_subtask(struct fm10k_intfc *interface) |
| { |
| int i; |
| |
| /* If we're down or resetting, just bail */ |
| if (test_bit(__FM10K_DOWN, &interface->state) || |
| test_bit(__FM10K_RESETTING, &interface->state)) |
| return; |
| |
| /* rate limit tx hang checks to only once every 2 seconds */ |
| if (time_is_after_eq_jiffies(interface->next_tx_hang_check)) |
| return; |
| interface->next_tx_hang_check = jiffies + (2 * HZ); |
| |
| if (netif_carrier_ok(interface->netdev)) { |
| /* Force detection of hung controller */ |
| for (i = 0; i < interface->num_tx_queues; i++) |
| set_check_for_tx_hang(interface->tx_ring[i]); |
| |
| /* Rearm all in-use q_vectors for immediate firing */ |
| for (i = 0; i < interface->num_q_vectors; i++) { |
| struct fm10k_q_vector *qv = interface->q_vector[i]; |
| |
| if (!qv->tx.count && !qv->rx.count) |
| continue; |
| writel(FM10K_ITR_ENABLE | FM10K_ITR_PENDING2, qv->itr); |
| } |
| } |
| } |
| |
| /** |
| * fm10k_service_task - manages and runs subtasks |
| * @work: pointer to work_struct containing our data |
| **/ |
| static void fm10k_service_task(struct work_struct *work) |
| { |
| struct fm10k_intfc *interface; |
| |
| interface = container_of(work, struct fm10k_intfc, service_task); |
| |
| /* tasks always capable of running, but must be rtnl protected */ |
| fm10k_mbx_subtask(interface); |
| fm10k_detach_subtask(interface); |
| fm10k_reset_subtask(interface); |
| |
| /* tasks only run when interface is up */ |
| fm10k_watchdog_subtask(interface); |
| fm10k_check_hang_subtask(interface); |
| fm10k_ts_tx_subtask(interface); |
| |
| /* release lock on service events to allow scheduling next event */ |
| fm10k_service_event_complete(interface); |
| } |
| |
| /** |
| * fm10k_configure_tx_ring - Configure Tx ring after Reset |
| * @interface: board private structure |
| * @ring: structure containing ring specific data |
| * |
| * Configure the Tx descriptor ring after a reset. |
| **/ |
| static void fm10k_configure_tx_ring(struct fm10k_intfc *interface, |
| struct fm10k_ring *ring) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| u64 tdba = ring->dma; |
| u32 size = ring->count * sizeof(struct fm10k_tx_desc); |
| u32 txint = FM10K_INT_MAP_DISABLE; |
| u32 txdctl = FM10K_TXDCTL_ENABLE | (1 << FM10K_TXDCTL_MAX_TIME_SHIFT); |
| u8 reg_idx = ring->reg_idx; |
| |
| /* disable queue to avoid issues while updating state */ |
| fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), 0); |
| fm10k_write_flush(hw); |
| |
| /* possible poll here to verify ring resources have been cleaned */ |
| |
| /* set location and size for descriptor ring */ |
| fm10k_write_reg(hw, FM10K_TDBAL(reg_idx), tdba & DMA_BIT_MASK(32)); |
| fm10k_write_reg(hw, FM10K_TDBAH(reg_idx), tdba >> 32); |
| fm10k_write_reg(hw, FM10K_TDLEN(reg_idx), size); |
| |
| /* reset head and tail pointers */ |
| fm10k_write_reg(hw, FM10K_TDH(reg_idx), 0); |
| fm10k_write_reg(hw, FM10K_TDT(reg_idx), 0); |
| |
| /* store tail pointer */ |
| ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)]; |
| |
| /* reset ntu and ntc to place SW in sync with hardwdare */ |
| ring->next_to_clean = 0; |
| ring->next_to_use = 0; |
| |
| /* Map interrupt */ |
| if (ring->q_vector) { |
| txint = ring->q_vector->v_idx + NON_Q_VECTORS(hw); |
| txint |= FM10K_INT_MAP_TIMER0; |
| } |
| |
| fm10k_write_reg(hw, FM10K_TXINT(reg_idx), txint); |
| |
| /* enable use of FTAG bit in Tx descriptor, register is RO for VF */ |
| fm10k_write_reg(hw, FM10K_PFVTCTL(reg_idx), |
| FM10K_PFVTCTL_FTAG_DESC_ENABLE); |
| |
| /* enable queue */ |
| fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), txdctl); |
| } |
| |
| /** |
| * fm10k_enable_tx_ring - Verify Tx ring is enabled after configuration |
| * @interface: board private structure |
| * @ring: structure containing ring specific data |
| * |
| * Verify the Tx descriptor ring is ready for transmit. |
| **/ |
| static void fm10k_enable_tx_ring(struct fm10k_intfc *interface, |
| struct fm10k_ring *ring) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| int wait_loop = 10; |
| u32 txdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* if we are already enabled just exit */ |
| if (fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)) & FM10K_TXDCTL_ENABLE) |
| return; |
| |
| /* poll to verify queue is enabled */ |
| do { |
| usleep_range(1000, 2000); |
| txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)); |
| } while (!(txdctl & FM10K_TXDCTL_ENABLE) && --wait_loop); |
| if (!wait_loop) |
| netif_err(interface, drv, interface->netdev, |
| "Could not enable Tx Queue %d\n", reg_idx); |
| } |
| |
| /** |
| * fm10k_configure_tx - Configure Transmit Unit after Reset |
| * @interface: board private structure |
| * |
| * Configure the Tx unit of the MAC after a reset. |
| **/ |
| static void fm10k_configure_tx(struct fm10k_intfc *interface) |
| { |
| int i; |
| |
| /* Setup the HW Tx Head and Tail descriptor pointers */ |
| for (i = 0; i < interface->num_tx_queues; i++) |
| fm10k_configure_tx_ring(interface, interface->tx_ring[i]); |
| |
| /* poll here to verify that Tx rings are now enabled */ |
| for (i = 0; i < interface->num_tx_queues; i++) |
| fm10k_enable_tx_ring(interface, interface->tx_ring[i]); |
| } |
| |
| /** |
| * fm10k_configure_rx_ring - Configure Rx ring after Reset |
| * @interface: board private structure |
| * @ring: structure containing ring specific data |
| * |
| * Configure the Rx descriptor ring after a reset. |
| **/ |
| static void fm10k_configure_rx_ring(struct fm10k_intfc *interface, |
| struct fm10k_ring *ring) |
| { |
| u64 rdba = ring->dma; |
| struct fm10k_hw *hw = &interface->hw; |
| u32 size = ring->count * sizeof(union fm10k_rx_desc); |
| u32 rxqctl = FM10K_RXQCTL_ENABLE | FM10K_RXQCTL_PF; |
| u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY; |
| u32 srrctl = FM10K_SRRCTL_BUFFER_CHAINING_EN; |
| u32 rxint = FM10K_INT_MAP_DISABLE; |
| u8 rx_pause = interface->rx_pause; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* disable queue to avoid issues while updating state */ |
| fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), 0); |
| fm10k_write_flush(hw); |
| |
| /* possible poll here to verify ring resources have been cleaned */ |
| |
| /* set location and size for descriptor ring */ |
| fm10k_write_reg(hw, FM10K_RDBAL(reg_idx), rdba & DMA_BIT_MASK(32)); |
| fm10k_write_reg(hw, FM10K_RDBAH(reg_idx), rdba >> 32); |
| fm10k_write_reg(hw, FM10K_RDLEN(reg_idx), size); |
| |
| /* reset head and tail pointers */ |
| fm10k_write_reg(hw, FM10K_RDH(reg_idx), 0); |
| fm10k_write_reg(hw, FM10K_RDT(reg_idx), 0); |
| |
| /* store tail pointer */ |
| ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)]; |
| |
| /* reset ntu and ntc to place SW in sync with hardwdare */ |
| ring->next_to_clean = 0; |
| ring->next_to_use = 0; |
| ring->next_to_alloc = 0; |
| |
| /* Configure the Rx buffer size for one buff without split */ |
| srrctl |= FM10K_RX_BUFSZ >> FM10K_SRRCTL_BSIZEPKT_SHIFT; |
| |
| /* Configure the Rx ring to suppress loopback packets */ |
| srrctl |= FM10K_SRRCTL_LOOPBACK_SUPPRESS; |
| fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl); |
| |
| /* Enable drop on empty */ |
| #ifdef CONFIG_DCB |
| if (interface->pfc_en) |
| rx_pause = interface->pfc_en; |
| #endif |
| if (!(rx_pause & (1 << ring->qos_pc))) |
| rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY; |
| |
| fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl); |
| |
| /* assign default VLAN to queue */ |
| ring->vid = hw->mac.default_vid; |
| |
| /* Map interrupt */ |
| if (ring->q_vector) { |
| rxint = ring->q_vector->v_idx + NON_Q_VECTORS(hw); |
| rxint |= FM10K_INT_MAP_TIMER1; |
| } |
| |
| fm10k_write_reg(hw, FM10K_RXINT(reg_idx), rxint); |
| |
| /* enable queue */ |
| fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl); |
| |
| /* place buffers on ring for receive data */ |
| fm10k_alloc_rx_buffers(ring, fm10k_desc_unused(ring)); |
| } |
| |
| /** |
| * fm10k_update_rx_drop_en - Configures the drop enable bits for Rx rings |
| * @interface: board private structure |
| * |
| * Configure the drop enable bits for the Rx rings. |
| **/ |
| void fm10k_update_rx_drop_en(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| u8 rx_pause = interface->rx_pause; |
| int i; |
| |
| #ifdef CONFIG_DCB |
| if (interface->pfc_en) |
| rx_pause = interface->pfc_en; |
| |
| #endif |
| for (i = 0; i < interface->num_rx_queues; i++) { |
| struct fm10k_ring *ring = interface->rx_ring[i]; |
| u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY; |
| u8 reg_idx = ring->reg_idx; |
| |
| if (!(rx_pause & (1 << ring->qos_pc))) |
| rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY; |
| |
| fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl); |
| } |
| } |
| |
| /** |
| * fm10k_configure_dglort - Configure Receive DGLORT after reset |
| * @interface: board private structure |
| * |
| * Configure the DGLORT description and RSS tables. |
| **/ |
| static void fm10k_configure_dglort(struct fm10k_intfc *interface) |
| { |
| struct fm10k_dglort_cfg dglort = { 0 }; |
| struct fm10k_hw *hw = &interface->hw; |
| int i; |
| u32 mrqc; |
| |
| /* Fill out hash function seeds */ |
| for (i = 0; i < FM10K_RSSRK_SIZE; i++) |
| fm10k_write_reg(hw, FM10K_RSSRK(0, i), interface->rssrk[i]); |
| |
| /* Write RETA table to hardware */ |
| for (i = 0; i < FM10K_RETA_SIZE; i++) |
| fm10k_write_reg(hw, FM10K_RETA(0, i), interface->reta[i]); |
| |
| /* Generate RSS hash based on packet types, TCP/UDP |
| * port numbers and/or IPv4/v6 src and dst addresses |
| */ |
| mrqc = FM10K_MRQC_IPV4 | |
| FM10K_MRQC_TCP_IPV4 | |
| FM10K_MRQC_IPV6 | |
| FM10K_MRQC_TCP_IPV6; |
| |
| if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV4_UDP) |
| mrqc |= FM10K_MRQC_UDP_IPV4; |
| if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV6_UDP) |
| mrqc |= FM10K_MRQC_UDP_IPV6; |
| |
| fm10k_write_reg(hw, FM10K_MRQC(0), mrqc); |
| |
| /* configure default DGLORT mapping for RSS/DCB */ |
| dglort.inner_rss = 1; |
| dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); |
| dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); |
| hw->mac.ops.configure_dglort_map(hw, &dglort); |
| |
| /* assign GLORT per queue for queue mapped testing */ |
| if (interface->glort_count > 64) { |
| memset(&dglort, 0, sizeof(dglort)); |
| dglort.inner_rss = 1; |
| dglort.glort = interface->glort + 64; |
| dglort.idx = fm10k_dglort_pf_queue; |
| dglort.queue_l = fls(interface->num_rx_queues - 1); |
| hw->mac.ops.configure_dglort_map(hw, &dglort); |
| } |
| |
| /* assign glort value for RSS/DCB specific to this interface */ |
| memset(&dglort, 0, sizeof(dglort)); |
| dglort.inner_rss = 1; |
| dglort.glort = interface->glort; |
| dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); |
| dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); |
| /* configure DGLORT mapping for RSS/DCB */ |
| dglort.idx = fm10k_dglort_pf_rss; |
| if (interface->l2_accel) |
| dglort.shared_l = fls(interface->l2_accel->size); |
| hw->mac.ops.configure_dglort_map(hw, &dglort); |
| } |
| |
| /** |
| * fm10k_configure_rx - Configure Receive Unit after Reset |
| * @interface: board private structure |
| * |
| * Configure the Rx unit of the MAC after a reset. |
| **/ |
| static void fm10k_configure_rx(struct fm10k_intfc *interface) |
| { |
| int i; |
| |
| /* Configure SWPRI to PC map */ |
| fm10k_configure_swpri_map(interface); |
| |
| /* Configure RSS and DGLORT map */ |
| fm10k_configure_dglort(interface); |
| |
| /* Setup the HW Rx Head and Tail descriptor pointers */ |
| for (i = 0; i < interface->num_rx_queues; i++) |
| fm10k_configure_rx_ring(interface, interface->rx_ring[i]); |
| |
| /* possible poll here to verify that Rx rings are now enabled */ |
| } |
| |
| static void fm10k_napi_enable_all(struct fm10k_intfc *interface) |
| { |
| struct fm10k_q_vector *q_vector; |
| int q_idx; |
| |
| for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) { |
| q_vector = interface->q_vector[q_idx]; |
| napi_enable(&q_vector->napi); |
| } |
| } |
| |
| static irqreturn_t fm10k_msix_clean_rings(int __always_unused irq, void *data) |
| { |
| struct fm10k_q_vector *q_vector = data; |
| |
| if (q_vector->rx.count || q_vector->tx.count) |
| napi_schedule(&q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data) |
| { |
| struct fm10k_intfc *interface = data; |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_mbx_info *mbx = &hw->mbx; |
| |
| /* re-enable mailbox interrupt and indicate 20us delay */ |
| fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR), |
| FM10K_ITR_ENABLE | FM10K_MBX_INT_DELAY); |
| |
| /* service upstream mailbox */ |
| if (fm10k_mbx_trylock(interface)) { |
| mbx->ops.process(hw, mbx); |
| fm10k_mbx_unlock(interface); |
| } |
| |
| hw->mac.get_host_state = 1; |
| fm10k_service_event_schedule(interface); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /** |
| * fm10k_netpoll - A Polling 'interrupt' handler |
| * @netdev: network interface device structure |
| * |
| * This is used by netconsole to send skbs without having to re-enable |
| * interrupts. It's not called while the normal interrupt routine is executing. |
| **/ |
| void fm10k_netpoll(struct net_device *netdev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| int i; |
| |
| /* if interface is down do nothing */ |
| if (test_bit(__FM10K_DOWN, &interface->state)) |
| return; |
| |
| for (i = 0; i < interface->num_q_vectors; i++) |
| fm10k_msix_clean_rings(0, interface->q_vector[i]); |
| } |
| |
| #endif |
| #define FM10K_ERR_MSG(type) case (type): error = #type; break |
| static void fm10k_print_fault(struct fm10k_intfc *interface, int type, |
| struct fm10k_fault *fault) |
| { |
| struct pci_dev *pdev = interface->pdev; |
| char *error; |
| |
| switch (type) { |
| case FM10K_PCA_FAULT: |
| switch (fault->type) { |
| default: |
| error = "Unknown PCA error"; |
| break; |
| FM10K_ERR_MSG(PCA_NO_FAULT); |
| FM10K_ERR_MSG(PCA_UNMAPPED_ADDR); |
| FM10K_ERR_MSG(PCA_BAD_QACCESS_PF); |
| FM10K_ERR_MSG(PCA_BAD_QACCESS_VF); |
| FM10K_ERR_MSG(PCA_MALICIOUS_REQ); |
| FM10K_ERR_MSG(PCA_POISONED_TLP); |
| FM10K_ERR_MSG(PCA_TLP_ABORT); |
| } |
| break; |
| case FM10K_THI_FAULT: |
| switch (fault->type) { |
| default: |
| error = "Unknown THI error"; |
| break; |
| FM10K_ERR_MSG(THI_NO_FAULT); |
| FM10K_ERR_MSG(THI_MAL_DIS_Q_FAULT); |
| } |
| break; |
| case FM10K_FUM_FAULT: |
| switch (fault->type) { |
| default: |
| error = "Unknown FUM error"; |
| break; |
| FM10K_ERR_MSG(FUM_NO_FAULT); |
| FM10K_ERR_MSG(FUM_UNMAPPED_ADDR); |
| FM10K_ERR_MSG(FUM_BAD_VF_QACCESS); |
| FM10K_ERR_MSG(FUM_ADD_DECODE_ERR); |
| FM10K_ERR_MSG(FUM_RO_ERROR); |
| FM10K_ERR_MSG(FUM_QPRC_CRC_ERROR); |
| FM10K_ERR_MSG(FUM_CSR_TIMEOUT); |
| FM10K_ERR_MSG(FUM_INVALID_TYPE); |
| FM10K_ERR_MSG(FUM_INVALID_LENGTH); |
| FM10K_ERR_MSG(FUM_INVALID_BE); |
| FM10K_ERR_MSG(FUM_INVALID_ALIGN); |
| } |
| break; |
| default: |
| error = "Undocumented fault"; |
| break; |
| } |
| |
| dev_warn(&pdev->dev, |
| "%s Address: 0x%llx SpecInfo: 0x%x Func: %02x.%0x\n", |
| error, fault->address, fault->specinfo, |
| PCI_SLOT(fault->func), PCI_FUNC(fault->func)); |
| } |
| |
| static void fm10k_report_fault(struct fm10k_intfc *interface, u32 eicr) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_fault fault = { 0 }; |
| int type, err; |
| |
| for (eicr &= FM10K_EICR_FAULT_MASK, type = FM10K_PCA_FAULT; |
| eicr; |
| eicr >>= 1, type += FM10K_FAULT_SIZE) { |
| /* only check if there is an error reported */ |
| if (!(eicr & 0x1)) |
| continue; |
| |
| /* retrieve fault info */ |
| err = hw->mac.ops.get_fault(hw, type, &fault); |
| if (err) { |
| dev_err(&interface->pdev->dev, |
| "error reading fault\n"); |
| continue; |
| } |
| |
| fm10k_print_fault(interface, type, &fault); |
| } |
| } |
| |
| static void fm10k_reset_drop_on_empty(struct fm10k_intfc *interface, u32 eicr) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| const u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY; |
| u32 maxholdq; |
| int q; |
| |
| if (!(eicr & FM10K_EICR_MAXHOLDTIME)) |
| return; |
| |
| maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(7)); |
| if (maxholdq) |
| fm10k_write_reg(hw, FM10K_MAXHOLDQ(7), maxholdq); |
| for (q = 255;;) { |
| if (maxholdq & (1 << 31)) { |
| if (q < FM10K_MAX_QUEUES_PF) { |
| interface->rx_overrun_pf++; |
| fm10k_write_reg(hw, FM10K_RXDCTL(q), rxdctl); |
| } else { |
| interface->rx_overrun_vf++; |
| } |
| } |
| |
| maxholdq *= 2; |
| if (!maxholdq) |
| q &= ~(32 - 1); |
| |
| if (!q) |
| break; |
| |
| if (q-- % 32) |
| continue; |
| |
| maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(q / 32)); |
| if (maxholdq) |
| fm10k_write_reg(hw, FM10K_MAXHOLDQ(q / 32), maxholdq); |
| } |
| } |
| |
| static irqreturn_t fm10k_msix_mbx_pf(int __always_unused irq, void *data) |
| { |
| struct fm10k_intfc *interface = data; |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_mbx_info *mbx = &hw->mbx; |
| u32 eicr; |
| |
| /* unmask any set bits related to this interrupt */ |
| eicr = fm10k_read_reg(hw, FM10K_EICR); |
| fm10k_write_reg(hw, FM10K_EICR, eicr & (FM10K_EICR_MAILBOX | |
| FM10K_EICR_SWITCHREADY | |
| FM10K_EICR_SWITCHNOTREADY)); |
| |
| /* report any faults found to the message log */ |
| fm10k_report_fault(interface, eicr); |
| |
| /* reset any queues disabled due to receiver overrun */ |
| fm10k_reset_drop_on_empty(interface, eicr); |
| |
| /* service mailboxes */ |
| if (fm10k_mbx_trylock(interface)) { |
| mbx->ops.process(hw, mbx); |
| /* handle VFLRE events */ |
| fm10k_iov_event(interface); |
| fm10k_mbx_unlock(interface); |
| } |
| |
| /* if switch toggled state we should reset GLORTs */ |
| if (eicr & FM10K_EICR_SWITCHNOTREADY) { |
| /* force link down for at least 4 seconds */ |
| interface->link_down_event = jiffies + (4 * HZ); |
| set_bit(__FM10K_LINK_DOWN, &interface->state); |
| |
| /* reset dglort_map back to no config */ |
| hw->mac.dglort_map = FM10K_DGLORTMAP_NONE; |
| } |
| |
| /* we should validate host state after interrupt event */ |
| hw->mac.get_host_state = 1; |
| |
| /* validate host state, and handle VF mailboxes in the service task */ |
| fm10k_service_event_schedule(interface); |
| |
| /* re-enable mailbox interrupt and indicate 20us delay */ |
| fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR), |
| FM10K_ITR_ENABLE | FM10K_MBX_INT_DELAY); |
| |
| return IRQ_HANDLED; |
| } |
| |
| void fm10k_mbx_free_irq(struct fm10k_intfc *interface) |
| { |
| struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR]; |
| struct fm10k_hw *hw = &interface->hw; |
| int itr_reg; |
| |
| /* disconnect the mailbox */ |
| hw->mbx.ops.disconnect(hw, &hw->mbx); |
| |
| /* disable Mailbox cause */ |
| if (hw->mac.type == fm10k_mac_pf) { |
| fm10k_write_reg(hw, FM10K_EIMR, |
| FM10K_EIMR_DISABLE(PCA_FAULT) | |
| FM10K_EIMR_DISABLE(FUM_FAULT) | |
| FM10K_EIMR_DISABLE(MAILBOX) | |
| FM10K_EIMR_DISABLE(SWITCHREADY) | |
| FM10K_EIMR_DISABLE(SWITCHNOTREADY) | |
| FM10K_EIMR_DISABLE(SRAMERROR) | |
| FM10K_EIMR_DISABLE(VFLR) | |
| FM10K_EIMR_DISABLE(MAXHOLDTIME)); |
| itr_reg = FM10K_ITR(FM10K_MBX_VECTOR); |
| } else { |
| itr_reg = FM10K_VFITR(FM10K_MBX_VECTOR); |
| } |
| |
| fm10k_write_reg(hw, itr_reg, FM10K_ITR_MASK_SET); |
| |
| free_irq(entry->vector, interface); |
| } |
| |
| static s32 fm10k_mbx_mac_addr(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info *mbx) |
| { |
| bool vlan_override = hw->mac.vlan_override; |
| u16 default_vid = hw->mac.default_vid; |
| struct fm10k_intfc *interface; |
| s32 err; |
| |
| err = fm10k_msg_mac_vlan_vf(hw, results, mbx); |
| if (err) |
| return err; |
| |
| interface = container_of(hw, struct fm10k_intfc, hw); |
| |
| /* MAC was changed so we need reset */ |
| if (is_valid_ether_addr(hw->mac.perm_addr) && |
| memcmp(hw->mac.perm_addr, hw->mac.addr, ETH_ALEN)) |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| |
| /* VLAN override was changed, or default VLAN changed */ |
| if ((vlan_override != hw->mac.vlan_override) || |
| (default_vid != hw->mac.default_vid)) |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| |
| return 0; |
| } |
| |
| static s32 fm10k_1588_msg_vf(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info __always_unused *mbx) |
| { |
| struct fm10k_intfc *interface; |
| u64 timestamp; |
| s32 err; |
| |
| err = fm10k_tlv_attr_get_u64(results[FM10K_1588_MSG_TIMESTAMP], |
| ×tamp); |
| if (err) |
| return err; |
| |
| interface = container_of(hw, struct fm10k_intfc, hw); |
| |
| fm10k_ts_tx_hwtstamp(interface, 0, timestamp); |
| |
| return 0; |
| } |
| |
| /* generic error handler for mailbox issues */ |
| static s32 fm10k_mbx_error(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info __always_unused *mbx) |
| { |
| struct fm10k_intfc *interface; |
| struct pci_dev *pdev; |
| |
| interface = container_of(hw, struct fm10k_intfc, hw); |
| pdev = interface->pdev; |
| |
| dev_err(&pdev->dev, "Unknown message ID %u\n", |
| **results & FM10K_TLV_ID_MASK); |
| |
| return 0; |
| } |
| |
| static const struct fm10k_msg_data vf_mbx_data[] = { |
| FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), |
| FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_mbx_mac_addr), |
| FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf), |
| FM10K_VF_MSG_1588_HANDLER(fm10k_1588_msg_vf), |
| FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error), |
| }; |
| |
| static int fm10k_mbx_request_irq_vf(struct fm10k_intfc *interface) |
| { |
| struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR]; |
| struct net_device *dev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| int err; |
| |
| /* Use timer0 for interrupt moderation on the mailbox */ |
| u32 itr = FM10K_INT_MAP_TIMER0 | entry->entry; |
| |
| /* register mailbox handlers */ |
| err = hw->mbx.ops.register_handlers(&hw->mbx, vf_mbx_data); |
| if (err) |
| return err; |
| |
| /* request the IRQ */ |
| err = request_irq(entry->vector, fm10k_msix_mbx_vf, 0, |
| dev->name, interface); |
| if (err) { |
| netif_err(interface, probe, dev, |
| "request_irq for msix_mbx failed: %d\n", err); |
| return err; |
| } |
| |
| /* map all of the interrupt sources */ |
| fm10k_write_reg(hw, FM10K_VFINT_MAP, itr); |
| |
| /* enable interrupt */ |
| fm10k_write_reg(hw, FM10K_VFITR(entry->entry), FM10K_ITR_ENABLE); |
| |
| return 0; |
| } |
| |
| static s32 fm10k_lport_map(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info *mbx) |
| { |
| struct fm10k_intfc *interface; |
| u32 dglort_map = hw->mac.dglort_map; |
| s32 err; |
| |
| err = fm10k_msg_lport_map_pf(hw, results, mbx); |
| if (err) |
| return err; |
| |
| interface = container_of(hw, struct fm10k_intfc, hw); |
| |
| /* we need to reset if port count was just updated */ |
| if (dglort_map != hw->mac.dglort_map) |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| |
| return 0; |
| } |
| |
| static s32 fm10k_update_pvid(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info __always_unused *mbx) |
| { |
| struct fm10k_intfc *interface; |
| u16 glort, pvid; |
| u32 pvid_update; |
| s32 err; |
| |
| err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID], |
| &pvid_update); |
| if (err) |
| return err; |
| |
| /* extract values from the pvid update */ |
| glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT); |
| pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID); |
| |
| /* if glort is not valid return error */ |
| if (!fm10k_glort_valid_pf(hw, glort)) |
| return FM10K_ERR_PARAM; |
| |
| /* verify VID is valid */ |
| if (pvid >= FM10K_VLAN_TABLE_VID_MAX) |
| return FM10K_ERR_PARAM; |
| |
| interface = container_of(hw, struct fm10k_intfc, hw); |
| |
| /* check to see if this belongs to one of the VFs */ |
| err = fm10k_iov_update_pvid(interface, glort, pvid); |
| if (!err) |
| return 0; |
| |
| /* we need to reset if default VLAN was just updated */ |
| if (pvid != hw->mac.default_vid) |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| |
| hw->mac.default_vid = pvid; |
| |
| return 0; |
| } |
| |
| static s32 fm10k_1588_msg_pf(struct fm10k_hw *hw, u32 **results, |
| struct fm10k_mbx_info __always_unused *mbx) |
| { |
| struct fm10k_swapi_1588_timestamp timestamp; |
| struct fm10k_iov_data *iov_data; |
| struct fm10k_intfc *interface; |
| u16 sglort, vf_idx; |
| s32 err; |
| |
| err = fm10k_tlv_attr_get_le_struct( |
| results[FM10K_PF_ATTR_ID_1588_TIMESTAMP], |
| ×tamp, sizeof(timestamp)); |
| if (err) |
| return err; |
| |
| interface = container_of(hw, struct fm10k_intfc, hw); |
| |
| if (timestamp.dglort) { |
| fm10k_ts_tx_hwtstamp(interface, timestamp.dglort, |
| le64_to_cpu(timestamp.egress)); |
| return 0; |
| } |
| |
| /* either dglort or sglort must be set */ |
| if (!timestamp.sglort) |
| return FM10K_ERR_PARAM; |
| |
| /* verify GLORT is at least one of the ones we own */ |
| sglort = le16_to_cpu(timestamp.sglort); |
| if (!fm10k_glort_valid_pf(hw, sglort)) |
| return FM10K_ERR_PARAM; |
| |
| if (sglort == interface->glort) { |
| fm10k_ts_tx_hwtstamp(interface, 0, |
| le64_to_cpu(timestamp.ingress)); |
| return 0; |
| } |
| |
| /* if there is no iov_data then there is no mailboxes to process */ |
| if (!ACCESS_ONCE(interface->iov_data)) |
| return FM10K_ERR_PARAM; |
| |
| rcu_read_lock(); |
| |
| /* notify VF if this timestamp belongs to it */ |
| iov_data = interface->iov_data; |
| vf_idx = (hw->mac.dglort_map & FM10K_DGLORTMAP_NONE) - sglort; |
| |
| if (!iov_data || vf_idx >= iov_data->num_vfs) { |
| err = FM10K_ERR_PARAM; |
| goto err_unlock; |
| } |
| |
| err = hw->iov.ops.report_timestamp(hw, &iov_data->vf_info[vf_idx], |
| le64_to_cpu(timestamp.ingress)); |
| |
| err_unlock: |
| rcu_read_unlock(); |
| |
| return err; |
| } |
| |
| static const struct fm10k_msg_data pf_mbx_data[] = { |
| FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf), |
| FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf), |
| FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_lport_map), |
| FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf), |
| FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf), |
| FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_update_pvid), |
| FM10K_PF_MSG_1588_TIMESTAMP_HANDLER(fm10k_1588_msg_pf), |
| FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error), |
| }; |
| |
| static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface) |
| { |
| struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR]; |
| struct net_device *dev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| int err; |
| |
| /* Use timer0 for interrupt moderation on the mailbox */ |
| u32 mbx_itr = FM10K_INT_MAP_TIMER0 | entry->entry; |
| u32 other_itr = FM10K_INT_MAP_IMMEDIATE | entry->entry; |
| |
| /* register mailbox handlers */ |
| err = hw->mbx.ops.register_handlers(&hw->mbx, pf_mbx_data); |
| if (err) |
| return err; |
| |
| /* request the IRQ */ |
| err = request_irq(entry->vector, fm10k_msix_mbx_pf, 0, |
| dev->name, interface); |
| if (err) { |
| netif_err(interface, probe, dev, |
| "request_irq for msix_mbx failed: %d\n", err); |
| return err; |
| } |
| |
| /* Enable interrupts w/ no moderation for "other" interrupts */ |
| fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_PCIeFault), other_itr); |
| fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_SwitchUpDown), other_itr); |
| fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_SRAM), other_itr); |
| fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_MaxHoldTime), other_itr); |
| fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_VFLR), other_itr); |
| |
| /* Enable interrupts w/ moderation for mailbox */ |
| fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_Mailbox), mbx_itr); |
| |
| /* Enable individual interrupt causes */ |
| fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) | |
| FM10K_EIMR_ENABLE(FUM_FAULT) | |
| FM10K_EIMR_ENABLE(MAILBOX) | |
| FM10K_EIMR_ENABLE(SWITCHREADY) | |
| FM10K_EIMR_ENABLE(SWITCHNOTREADY) | |
| FM10K_EIMR_ENABLE(SRAMERROR) | |
| FM10K_EIMR_ENABLE(VFLR) | |
| FM10K_EIMR_ENABLE(MAXHOLDTIME)); |
| |
| /* enable interrupt */ |
| fm10k_write_reg(hw, FM10K_ITR(entry->entry), FM10K_ITR_ENABLE); |
| |
| return 0; |
| } |
| |
| int fm10k_mbx_request_irq(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| int err; |
| |
| /* enable Mailbox cause */ |
| if (hw->mac.type == fm10k_mac_pf) |
| err = fm10k_mbx_request_irq_pf(interface); |
| else |
| err = fm10k_mbx_request_irq_vf(interface); |
| |
| /* connect mailbox */ |
| if (!err) |
| err = hw->mbx.ops.connect(hw, &hw->mbx); |
| |
| return err; |
| } |
| |
| /** |
| * fm10k_qv_free_irq - release interrupts associated with queue vectors |
| * @interface: board private structure |
| * |
| * Release all interrupts associated with this interface |
| **/ |
| void fm10k_qv_free_irq(struct fm10k_intfc *interface) |
| { |
| int vector = interface->num_q_vectors; |
| struct fm10k_hw *hw = &interface->hw; |
| struct msix_entry *entry; |
| |
| entry = &interface->msix_entries[NON_Q_VECTORS(hw) + vector]; |
| |
| while (vector) { |
| struct fm10k_q_vector *q_vector; |
| |
| vector--; |
| entry--; |
| q_vector = interface->q_vector[vector]; |
| |
| if (!q_vector->tx.count && !q_vector->rx.count) |
| continue; |
| |
| /* disable interrupts */ |
| |
| writel(FM10K_ITR_MASK_SET, q_vector->itr); |
| |
| free_irq(entry->vector, q_vector); |
| } |
| } |
| |
| /** |
| * fm10k_qv_request_irq - initialize interrupts for queue vectors |
| * @interface: board private structure |
| * |
| * Attempts to configure interrupts using the best available |
| * capabilities of the hardware and kernel. |
| **/ |
| int fm10k_qv_request_irq(struct fm10k_intfc *interface) |
| { |
| struct net_device *dev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| struct msix_entry *entry; |
| int ri = 0, ti = 0; |
| int vector, err; |
| |
| entry = &interface->msix_entries[NON_Q_VECTORS(hw)]; |
| |
| for (vector = 0; vector < interface->num_q_vectors; vector++) { |
| struct fm10k_q_vector *q_vector = interface->q_vector[vector]; |
| |
| /* name the vector */ |
| if (q_vector->tx.count && q_vector->rx.count) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-TxRx-%d", dev->name, ri++); |
| ti++; |
| } else if (q_vector->rx.count) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-rx-%d", dev->name, ri++); |
| } else if (q_vector->tx.count) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-tx-%d", dev->name, ti++); |
| } else { |
| /* skip this unused q_vector */ |
| continue; |
| } |
| |
| /* Assign ITR register to q_vector */ |
| q_vector->itr = (hw->mac.type == fm10k_mac_pf) ? |
| &interface->uc_addr[FM10K_ITR(entry->entry)] : |
| &interface->uc_addr[FM10K_VFITR(entry->entry)]; |
| |
| /* request the IRQ */ |
| err = request_irq(entry->vector, &fm10k_msix_clean_rings, 0, |
| q_vector->name, q_vector); |
| if (err) { |
| netif_err(interface, probe, dev, |
| "request_irq failed for MSIX interrupt Error: %d\n", |
| err); |
| goto err_out; |
| } |
| |
| /* Enable q_vector */ |
| writel(FM10K_ITR_ENABLE, q_vector->itr); |
| |
| entry++; |
| } |
| |
| return 0; |
| |
| err_out: |
| /* wind through the ring freeing all entries and vectors */ |
| while (vector) { |
| struct fm10k_q_vector *q_vector; |
| |
| entry--; |
| vector--; |
| q_vector = interface->q_vector[vector]; |
| |
| if (!q_vector->tx.count && !q_vector->rx.count) |
| continue; |
| |
| /* disable interrupts */ |
| |
| writel(FM10K_ITR_MASK_SET, q_vector->itr); |
| |
| free_irq(entry->vector, q_vector); |
| } |
| |
| return err; |
| } |
| |
| void fm10k_up(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| |
| /* Enable Tx/Rx DMA */ |
| hw->mac.ops.start_hw(hw); |
| |
| /* configure Tx descriptor rings */ |
| fm10k_configure_tx(interface); |
| |
| /* configure Rx descriptor rings */ |
| fm10k_configure_rx(interface); |
| |
| /* configure interrupts */ |
| hw->mac.ops.update_int_moderator(hw); |
| |
| /* clear down bit to indicate we are ready to go */ |
| clear_bit(__FM10K_DOWN, &interface->state); |
| |
| /* enable polling cleanups */ |
| fm10k_napi_enable_all(interface); |
| |
| /* re-establish Rx filters */ |
| fm10k_restore_rx_state(interface); |
| |
| /* enable transmits */ |
| netif_tx_start_all_queues(interface->netdev); |
| |
| /* kick off the service timer now */ |
| hw->mac.get_host_state = 1; |
| mod_timer(&interface->service_timer, jiffies); |
| } |
| |
| static void fm10k_napi_disable_all(struct fm10k_intfc *interface) |
| { |
| struct fm10k_q_vector *q_vector; |
| int q_idx; |
| |
| for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) { |
| q_vector = interface->q_vector[q_idx]; |
| napi_disable(&q_vector->napi); |
| } |
| } |
| |
| void fm10k_down(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| |
| /* signal that we are down to the interrupt handler and service task */ |
| set_bit(__FM10K_DOWN, &interface->state); |
| |
| /* call carrier off first to avoid false dev_watchdog timeouts */ |
| netif_carrier_off(netdev); |
| |
| /* disable transmits */ |
| netif_tx_stop_all_queues(netdev); |
| netif_tx_disable(netdev); |
| |
| /* reset Rx filters */ |
| fm10k_reset_rx_state(interface); |
| |
| /* allow 10ms for device to quiesce */ |
| usleep_range(10000, 20000); |
| |
| /* disable polling routines */ |
| fm10k_napi_disable_all(interface); |
| |
| /* capture stats one last time before stopping interface */ |
| fm10k_update_stats(interface); |
| |
| /* Disable DMA engine for Tx/Rx */ |
| hw->mac.ops.stop_hw(hw); |
| |
| /* free any buffers still on the rings */ |
| fm10k_clean_all_tx_rings(interface); |
| fm10k_clean_all_rx_rings(interface); |
| } |
| |
| /** |
| * fm10k_sw_init - Initialize general software structures |
| * @interface: host interface private structure to initialize |
| * |
| * fm10k_sw_init initializes the interface private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| **/ |
| static int fm10k_sw_init(struct fm10k_intfc *interface, |
| const struct pci_device_id *ent) |
| { |
| const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data]; |
| struct fm10k_hw *hw = &interface->hw; |
| struct pci_dev *pdev = interface->pdev; |
| struct net_device *netdev = interface->netdev; |
| u32 rss_key[FM10K_RSSRK_SIZE]; |
| unsigned int rss; |
| int err; |
| |
| /* initialize back pointer */ |
| hw->back = interface; |
| hw->hw_addr = interface->uc_addr; |
| |
| /* PCI config space info */ |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->revision_id = pdev->revision; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_device_id = pdev->subsystem_device; |
| |
| /* Setup hw api */ |
| memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops)); |
| hw->mac.type = fi->mac; |
| |
| /* Setup IOV handlers */ |
| if (fi->iov_ops) |
| memcpy(&hw->iov.ops, fi->iov_ops, sizeof(hw->iov.ops)); |
| |
| /* Set common capability flags and settings */ |
| rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus()); |
| interface->ring_feature[RING_F_RSS].limit = rss; |
| fi->get_invariants(hw); |
| |
| /* pick up the PCIe bus settings for reporting later */ |
| if (hw->mac.ops.get_bus_info) |
| hw->mac.ops.get_bus_info(hw); |
| |
| /* limit the usable DMA range */ |
| if (hw->mac.ops.set_dma_mask) |
| hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev)); |
| |
| /* update netdev with DMA restrictions */ |
| if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) { |
| netdev->features |= NETIF_F_HIGHDMA; |
| netdev->vlan_features |= NETIF_F_HIGHDMA; |
| } |
| |
| /* delay any future reset requests */ |
| interface->last_reset = jiffies + (10 * HZ); |
| |
| /* reset and initialize the hardware so it is in a known state */ |
| err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw); |
| if (err) { |
| dev_err(&pdev->dev, "init_hw failed: %d\n", err); |
| return err; |
| } |
| |
| /* initialize hardware statistics */ |
| hw->mac.ops.update_hw_stats(hw, &interface->stats); |
| |
| /* Set upper limit on IOV VFs that can be allocated */ |
| pci_sriov_set_totalvfs(pdev, hw->iov.total_vfs); |
| |
| /* Start with random Ethernet address */ |
| eth_random_addr(hw->mac.addr); |
| |
| /* Initialize MAC address from hardware */ |
| err = hw->mac.ops.read_mac_addr(hw); |
| if (err) { |
| dev_warn(&pdev->dev, |
| "Failed to obtain MAC address defaulting to random\n"); |
| /* tag address assignment as random */ |
| netdev->addr_assign_type |= NET_ADDR_RANDOM; |
| } |
| |
| memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); |
| memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); |
| |
| if (!is_valid_ether_addr(netdev->perm_addr)) { |
| dev_err(&pdev->dev, "Invalid MAC Address\n"); |
| return -EIO; |
| } |
| |
| /* assign BAR 4 resources for use with PTP */ |
| if (fm10k_read_reg(hw, FM10K_CTRL) & FM10K_CTRL_BAR4_ALLOWED) |
| interface->sw_addr = ioremap(pci_resource_start(pdev, 4), |
| pci_resource_len(pdev, 4)); |
| hw->sw_addr = interface->sw_addr; |
| |
| /* Only the PF can support VXLAN and NVGRE offloads */ |
| if (hw->mac.type != fm10k_mac_pf) { |
| netdev->hw_enc_features = 0; |
| netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL; |
| netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL; |
| } |
| |
| /* initialize DCBNL interface */ |
| fm10k_dcbnl_set_ops(netdev); |
| |
| /* Initialize service timer and service task */ |
| set_bit(__FM10K_SERVICE_DISABLE, &interface->state); |
| setup_timer(&interface->service_timer, &fm10k_service_timer, |
| (unsigned long)interface); |
| INIT_WORK(&interface->service_task, fm10k_service_task); |
| |
| /* kick off service timer now, even when interface is down */ |
| mod_timer(&interface->service_timer, (HZ * 2) + jiffies); |
| |
| /* Intitialize timestamp data */ |
| fm10k_ts_init(interface); |
| |
| /* set default ring sizes */ |
| interface->tx_ring_count = FM10K_DEFAULT_TXD; |
| interface->rx_ring_count = FM10K_DEFAULT_RXD; |
| |
| /* set default interrupt moderation */ |
| interface->tx_itr = FM10K_ITR_10K; |
| interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_20K; |
| |
| /* initialize vxlan_port list */ |
| INIT_LIST_HEAD(&interface->vxlan_port); |
| |
| netdev_rss_key_fill(rss_key, sizeof(rss_key)); |
| memcpy(interface->rssrk, rss_key, sizeof(rss_key)); |
| |
| /* Start off interface as being down */ |
| set_bit(__FM10K_DOWN, &interface->state); |
| |
| return 0; |
| } |
| |
| static void fm10k_slot_warn(struct fm10k_intfc *interface) |
| { |
| struct device *dev = &interface->pdev->dev; |
| struct fm10k_hw *hw = &interface->hw; |
| |
| if (hw->mac.ops.is_slot_appropriate(hw)) |
| return; |
| |
| dev_warn(dev, |
| "For optimal performance, a %s %s slot is recommended.\n", |
| (hw->bus_caps.width == fm10k_bus_width_pcie_x1 ? "x1" : |
| hw->bus_caps.width == fm10k_bus_width_pcie_x4 ? "x4" : |
| "x8"), |
| (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s" : |
| hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s" : |
| "8.0GT/s")); |
| dev_warn(dev, |
| "A slot with more lanes and/or higher speed is suggested.\n"); |
| } |
| |
| /** |
| * fm10k_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in fm10k_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * fm10k_probe initializes an interface identified by a pci_dev structure. |
| * The OS initialization, configuring of the interface private structure, |
| * and a hardware reset occur. |
| **/ |
| static int fm10k_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct fm10k_intfc *interface; |
| struct fm10k_hw *hw; |
| int err; |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) |
| return err; |
| |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48)); |
| if (err) |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, |
| "DMA configuration failed: %d\n", err); |
| goto err_dma; |
| } |
| |
| err = pci_request_selected_regions(pdev, |
| pci_select_bars(pdev, |
| IORESOURCE_MEM), |
| fm10k_driver_name); |
| if (err) { |
| dev_err(&pdev->dev, |
| "pci_request_selected_regions failed: %d\n", err); |
| goto err_pci_reg; |
| } |
| |
| pci_enable_pcie_error_reporting(pdev); |
| |
| pci_set_master(pdev); |
| pci_save_state(pdev); |
| |
| netdev = fm10k_alloc_netdev(); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto err_alloc_netdev; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| interface = netdev_priv(netdev); |
| pci_set_drvdata(pdev, interface); |
| |
| interface->netdev = netdev; |
| interface->pdev = pdev; |
| hw = &interface->hw; |
| |
| interface->uc_addr = ioremap(pci_resource_start(pdev, 0), |
| FM10K_UC_ADDR_SIZE); |
| if (!interface->uc_addr) { |
| err = -EIO; |
| goto err_ioremap; |
| } |
| |
| err = fm10k_sw_init(interface, ent); |
| if (err) |
| goto err_sw_init; |
| |
| /* enable debugfs support */ |
| fm10k_dbg_intfc_init(interface); |
| |
| err = fm10k_init_queueing_scheme(interface); |
| if (err) |
| goto err_sw_init; |
| |
| err = fm10k_mbx_request_irq(interface); |
| if (err) |
| goto err_mbx_interrupt; |
| |
| /* final check of hardware state before registering the interface */ |
| err = fm10k_hw_ready(interface); |
| if (err) |
| goto err_register; |
| |
| err = register_netdev(netdev); |
| if (err) |
| goto err_register; |
| |
| /* carrier off reporting is important to ethtool even BEFORE open */ |
| netif_carrier_off(netdev); |
| |
| /* stop all the transmit queues from transmitting until link is up */ |
| netif_tx_stop_all_queues(netdev); |
| |
| /* Register PTP interface */ |
| fm10k_ptp_register(interface); |
| |
| /* print bus type/speed/width info */ |
| dev_info(&pdev->dev, "(PCI Express:%s Width: %s Payload: %s)\n", |
| (hw->bus.speed == fm10k_bus_speed_8000 ? "8.0GT/s" : |
| hw->bus.speed == fm10k_bus_speed_5000 ? "5.0GT/s" : |
| hw->bus.speed == fm10k_bus_speed_2500 ? "2.5GT/s" : |
| "Unknown"), |
| (hw->bus.width == fm10k_bus_width_pcie_x8 ? "x8" : |
| hw->bus.width == fm10k_bus_width_pcie_x4 ? "x4" : |
| hw->bus.width == fm10k_bus_width_pcie_x1 ? "x1" : |
| "Unknown"), |
| (hw->bus.payload == fm10k_bus_payload_128 ? "128B" : |
| hw->bus.payload == fm10k_bus_payload_256 ? "256B" : |
| hw->bus.payload == fm10k_bus_payload_512 ? "512B" : |
| "Unknown")); |
| |
| /* print warning for non-optimal configurations */ |
| fm10k_slot_warn(interface); |
| |
| /* enable SR-IOV after registering netdev to enforce PF/VF ordering */ |
| fm10k_iov_configure(pdev, 0); |
| |
| /* clear the service task disable bit to allow service task to start */ |
| clear_bit(__FM10K_SERVICE_DISABLE, &interface->state); |
| |
| return 0; |
| |
| err_register: |
| fm10k_mbx_free_irq(interface); |
| err_mbx_interrupt: |
| fm10k_clear_queueing_scheme(interface); |
| err_sw_init: |
| if (interface->sw_addr) |
| iounmap(interface->sw_addr); |
| iounmap(interface->uc_addr); |
| err_ioremap: |
| free_netdev(netdev); |
| err_alloc_netdev: |
| pci_release_selected_regions(pdev, |
| pci_select_bars(pdev, IORESOURCE_MEM)); |
| err_pci_reg: |
| err_dma: |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * fm10k_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * fm10k_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| **/ |
| static void fm10k_remove(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct net_device *netdev = interface->netdev; |
| |
| del_timer_sync(&interface->service_timer); |
| |
| set_bit(__FM10K_SERVICE_DISABLE, &interface->state); |
| cancel_work_sync(&interface->service_task); |
| |
| /* free netdev, this may bounce the interrupts due to setup_tc */ |
| if (netdev->reg_state == NETREG_REGISTERED) |
| unregister_netdev(netdev); |
| |
| /* cleanup timestamp handling */ |
| fm10k_ptp_unregister(interface); |
| |
| /* release VFs */ |
| fm10k_iov_disable(pdev); |
| |
| /* disable mailbox interrupt */ |
| fm10k_mbx_free_irq(interface); |
| |
| /* free interrupts */ |
| fm10k_clear_queueing_scheme(interface); |
| |
| /* remove any debugfs interfaces */ |
| fm10k_dbg_intfc_exit(interface); |
| |
| if (interface->sw_addr) |
| iounmap(interface->sw_addr); |
| iounmap(interface->uc_addr); |
| |
| free_netdev(netdev); |
| |
| pci_release_selected_regions(pdev, |
| pci_select_bars(pdev, IORESOURCE_MEM)); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| |
| pci_disable_device(pdev); |
| } |
| |
| #ifdef CONFIG_PM |
| /** |
| * fm10k_resume - Restore device to pre-sleep state |
| * @pdev: PCI device information struct |
| * |
| * fm10k_resume is called after the system has powered back up from a sleep |
| * state and is ready to resume operation. This function is meant to restore |
| * the device back to its pre-sleep state. |
| **/ |
| static int fm10k_resume(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| u32 err; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| |
| /* pci_restore_state clears dev->state_saved so call |
| * pci_save_state to restore it. |
| */ |
| pci_save_state(pdev); |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); |
| return err; |
| } |
| pci_set_master(pdev); |
| |
| pci_wake_from_d3(pdev, false); |
| |
| /* refresh hw_addr in case it was dropped */ |
| hw->hw_addr = interface->uc_addr; |
| |
| /* reset hardware to known state */ |
| err = hw->mac.ops.init_hw(&interface->hw); |
| if (err) |
| return err; |
| |
| /* reset statistics starting values */ |
| hw->mac.ops.rebind_hw_stats(hw, &interface->stats); |
| |
| /* reset clock */ |
| fm10k_ts_reset(interface); |
| |
| rtnl_lock(); |
| |
| err = fm10k_init_queueing_scheme(interface); |
| if (!err) { |
| fm10k_mbx_request_irq(interface); |
| if (netif_running(netdev)) |
| err = fm10k_open(netdev); |
| } |
| |
| rtnl_unlock(); |
| |
| if (err) |
| return err; |
| |
| /* restore SR-IOV interface */ |
| fm10k_iov_resume(pdev); |
| |
| netif_device_attach(netdev); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_suspend - Prepare the device for a system sleep state |
| * @pdev: PCI device information struct |
| * |
| * fm10k_suspend is meant to shutdown the device prior to the system entering |
| * a sleep state. The fm10k hardware does not support wake on lan so the |
| * driver simply needs to shut down the device so it is in a low power state. |
| **/ |
| static int fm10k_suspend(struct pci_dev *pdev, |
| pm_message_t __always_unused state) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct net_device *netdev = interface->netdev; |
| int err = 0; |
| |
| netif_device_detach(netdev); |
| |
| fm10k_iov_suspend(pdev); |
| |
| rtnl_lock(); |
| |
| if (netif_running(netdev)) |
| fm10k_close(netdev); |
| |
| fm10k_mbx_free_irq(interface); |
| |
| fm10k_clear_queueing_scheme(interface); |
| |
| rtnl_unlock(); |
| |
| err = pci_save_state(pdev); |
| if (err) |
| return err; |
| |
| pci_disable_device(pdev); |
| pci_wake_from_d3(pdev, false); |
| pci_set_power_state(pdev, PCI_D3hot); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_PM */ |
| /** |
| * fm10k_io_error_detected - called when PCI error is detected |
| * @pdev: Pointer to PCI device |
| * @state: The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct net_device *netdev = interface->netdev; |
| |
| netif_device_detach(netdev); |
| |
| if (state == pci_channel_io_perm_failure) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| if (netif_running(netdev)) |
| fm10k_close(netdev); |
| |
| fm10k_mbx_free_irq(interface); |
| |
| pci_disable_device(pdev); |
| |
| /* Request a slot reset. */ |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * fm10k_io_slot_reset - called after the pci bus has been reset. |
| * @pdev: Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. |
| */ |
| static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| pci_ers_result_t result; |
| |
| if (pci_enable_device_mem(pdev)) { |
| dev_err(&pdev->dev, |
| "Cannot re-enable PCI device after reset.\n"); |
| result = PCI_ERS_RESULT_DISCONNECT; |
| } else { |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| |
| /* After second error pci->state_saved is false, this |
| * resets it so EEH doesn't break. |
| */ |
| pci_save_state(pdev); |
| |
| pci_wake_from_d3(pdev, false); |
| |
| /* refresh hw_addr in case it was dropped */ |
| interface->hw.hw_addr = interface->uc_addr; |
| |
| interface->flags |= FM10K_FLAG_RESET_REQUESTED; |
| fm10k_service_event_schedule(interface); |
| |
| result = PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| pci_cleanup_aer_uncorrect_error_status(pdev); |
| |
| return result; |
| } |
| |
| /** |
| * fm10k_io_resume - called when traffic can start flowing again. |
| * @pdev: Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. |
| */ |
| static void fm10k_io_resume(struct pci_dev *pdev) |
| { |
| struct fm10k_intfc *interface = pci_get_drvdata(pdev); |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| int err = 0; |
| |
| /* reset hardware to known state */ |
| hw->mac.ops.init_hw(&interface->hw); |
| |
| /* reset statistics starting values */ |
| hw->mac.ops.rebind_hw_stats(hw, &interface->stats); |
| |
| /* reassociate interrupts */ |
| fm10k_mbx_request_irq(interface); |
| |
| /* reset clock */ |
| fm10k_ts_reset(interface); |
| |
| if (netif_running(netdev)) |
| err = fm10k_open(netdev); |
| |
| /* final check of hardware state before registering the interface */ |
| err = err ? : fm10k_hw_ready(interface); |
| |
| if (!err) |
| netif_device_attach(netdev); |
| } |
| |
| static const struct pci_error_handlers fm10k_err_handler = { |
| .error_detected = fm10k_io_error_detected, |
| .slot_reset = fm10k_io_slot_reset, |
| .resume = fm10k_io_resume, |
| }; |
| |
| static struct pci_driver fm10k_driver = { |
| .name = fm10k_driver_name, |
| .id_table = fm10k_pci_tbl, |
| .probe = fm10k_probe, |
| .remove = fm10k_remove, |
| #ifdef CONFIG_PM |
| .suspend = fm10k_suspend, |
| .resume = fm10k_resume, |
| #endif |
| .sriov_configure = fm10k_iov_configure, |
| .err_handler = &fm10k_err_handler |
| }; |
| |
| /** |
| * fm10k_register_pci_driver - register driver interface |
| * |
| * This funciton is called on module load in order to register the driver. |
| **/ |
| int fm10k_register_pci_driver(void) |
| { |
| return pci_register_driver(&fm10k_driver); |
| } |
| |
| /** |
| * fm10k_unregister_pci_driver - unregister driver interface |
| * |
| * This funciton is called on module unload in order to remove the driver. |
| **/ |
| void fm10k_unregister_pci_driver(void) |
| { |
| pci_unregister_driver(&fm10k_driver); |
| } |