drivers/soc/kendryte/k210-sysctl.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (c) 2019 Christoph Hellwig.
  * Copyright (c) 2019 Western Digital Corporation or its affiliates.
  */
 #include <linux/types.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
 #include <linux/bitfield.h>
 #include <asm/soc.h>

 #define K210_SYSCTL_CLK0_FREQ		26000000UL

 /* Registers base address */
 #define K210_SYSCTL_SYSCTL_BASE_ADDR	0x50440000ULL

 /* Registers */
 #define K210_SYSCTL_PLL0		0x08
 #define K210_SYSCTL_PLL1		0x0c
 /* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
 #define   PLL_RESET		(1 << 20)
 #define   PLL_PWR		(1 << 21)
 #define   PLL_INTFB		(1 << 22)
 #define   PLL_BYPASS		(1 << 23)
 #define   PLL_TEST		(1 << 24)
 #define   PLL_OUT_EN		(1 << 25)
 #define   PLL_TEST_EN		(1 << 26)
 #define K210_SYSCTL_PLL_LOCK		0x18
 #define   PLL0_LOCK1		(1 << 0)
 #define   PLL0_LOCK2		(1 << 1)
 #define   PLL0_SLIP_CLEAR	(1 << 2)
 #define   PLL0_TEST_CLK_OUT	(1 << 3)
 #define   PLL1_LOCK1		(1 << 8)
 #define   PLL1_LOCK2		(1 << 9)
 #define   PLL1_SLIP_CLEAR	(1 << 10)
 #define   PLL1_TEST_CLK_OUT	(1 << 11)
 #define   PLL2_LOCK1		(1 << 16)
 #define   PLL2_LOCK2		(1 << 16)
 #define   PLL2_SLIP_CLEAR	(1 << 18)
 #define   PLL2_TEST_CLK_OUT	(1 << 19)
 #define K210_SYSCTL_CLKSEL0	0x20
 #define   CLKSEL_ACLK		(1 << 0)
 #define K210_SYSCTL_CLKEN_CENT		0x28
 #define   CLKEN_CPU		(1 << 0)
 #define   CLKEN_SRAM0		(1 << 1)
 #define   CLKEN_SRAM1		(1 << 2)
 #define   CLKEN_APB0		(1 << 3)
 #define   CLKEN_APB1		(1 << 4)
 #define   CLKEN_APB2		(1 << 5)
 #define K210_SYSCTL_CLKEN_PERI		0x2c
 #define   CLKEN_ROM		(1 << 0)
 #define   CLKEN_DMA		(1 << 1)
 #define   CLKEN_AI		(1 << 2)
 #define   CLKEN_DVP		(1 << 3)
 #define   CLKEN_FFT		(1 << 4)
 #define   CLKEN_GPIO		(1 << 5)
 #define   CLKEN_SPI0		(1 << 6)
 #define   CLKEN_SPI1		(1 << 7)
 #define   CLKEN_SPI2		(1 << 8)
 #define   CLKEN_SPI3		(1 << 9)
 #define   CLKEN_I2S0		(1 << 10)
 #define   CLKEN_I2S1		(1 << 11)
 #define   CLKEN_I2S2		(1 << 12)
 #define   CLKEN_I2C0		(1 << 13)
 #define   CLKEN_I2C1		(1 << 14)
 #define   CLKEN_I2C2		(1 << 15)
 #define   CLKEN_UART1		(1 << 16)
 #define   CLKEN_UART2		(1 << 17)
 #define   CLKEN_UART3		(1 << 18)
 #define   CLKEN_AES		(1 << 19)
 #define   CLKEN_FPIO		(1 << 20)
 #define   CLKEN_TIMER0		(1 << 21)
 #define   CLKEN_TIMER1		(1 << 22)
 #define   CLKEN_TIMER2		(1 << 23)
 #define   CLKEN_WDT0		(1 << 24)
 #define   CLKEN_WDT1		(1 << 25)
 #define   CLKEN_SHA		(1 << 26)
 #define   CLKEN_OTP		(1 << 27)
 #define   CLKEN_RTC		(1 << 29)

 struct k210_sysctl {
 	void __iomem		*regs;
 	struct clk_hw		hw;
 };

 static void k210_set_bits(u32 val, void __iomem *reg)
 {
 	writel(readl(reg) | val, reg);
 }

 static void k210_clear_bits(u32 val, void __iomem *reg)
 {
 	writel(readl(reg) & ~val, reg);
 }

 static void k210_pll1_enable(void __iomem *regs)
 {
 	u32 val;

 	val = readl(regs + K210_SYSCTL_PLL1);
 	val &= ~GENMASK(19, 0);				/* clkr1 = 0 */
 	val |= FIELD_PREP(GENMASK(9, 4), 0x3B);		/* clkf1 = 59 */
 	val |= FIELD_PREP(GENMASK(13, 10), 0x3);	/* clkod1 = 3 */
 	val |= FIELD_PREP(GENMASK(19, 14), 0x3B);	/* bwadj1 = 59 */
 	writel(val, regs + K210_SYSCTL_PLL1);

 	k210_clear_bits(PLL_BYPASS, regs + K210_SYSCTL_PLL1);
 	k210_set_bits(PLL_PWR, regs + K210_SYSCTL_PLL1);

 	/*
 	 * Reset the pll. The magic NOPs come from the Kendryte reference SDK.
 	 */
 	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
 	k210_set_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
 	nop();
 	nop();
 	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);

 	for (;;) {
 		val = readl(regs + K210_SYSCTL_PLL_LOCK);
 		if (val & PLL1_LOCK2)
 			break;
 		writel(val | PLL1_SLIP_CLEAR, regs + K210_SYSCTL_PLL_LOCK);
 	}

 	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL1);
 }

 static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw,
 		unsigned long parent_rate)
 {
 	struct k210_sysctl *s = container_of(hw, struct k210_sysctl, hw);
 	u32 clksel0, pll0;
 	u64 pll0_freq, clkr0, clkf0, clkod0;

 	/*
 	 * If the clock selector is not set, use the base frequency.
 	 * Otherwise, use PLL0 frequency with a frequency divisor.
 	 */
 	clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0);
 	if (!(clksel0 & CLKSEL_ACLK))
 		return K210_SYSCTL_CLK0_FREQ;

 	/*
 	 * Get PLL0 frequency:
 	 * freq = base frequency * clkf0 / (clkr0 * clkod0)
 	 */
 	pll0 = readl(s->regs + K210_SYSCTL_PLL0);
 	clkr0 = 1 + FIELD_GET(GENMASK(3, 0), pll0);
 	clkf0 = 1 + FIELD_GET(GENMASK(9, 4), pll0);
 	clkod0 = 1 + FIELD_GET(GENMASK(13, 10), pll0);
 	pll0_freq = clkf0 * K210_SYSCTL_CLK0_FREQ / (clkr0 * clkod0);

 	/* Get the frequency divisor from the clock selector */
 	return pll0_freq / (2ULL << FIELD_GET(0x00000006, clksel0));
 }

 static const struct clk_ops k210_sysctl_clk_ops = {
 	.recalc_rate	= k210_sysctl_clk_recalc_rate,
 };

 static const struct clk_init_data k210_clk_init_data = {
 	.name		= "k210-sysctl-pll1",
 	.ops		= &k210_sysctl_clk_ops,
 };

 static int k210_sysctl_probe(struct platform_device *pdev)
 {
 	struct k210_sysctl *s;
 	int error;

 	pr_info("Kendryte K210 SoC sysctl\n");

 	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
 	if (!s)
 		return -ENOMEM;

 	s->regs = devm_ioremap_resource(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_MEM, 0));
 	if (IS_ERR(s->regs))
 		return PTR_ERR(s->regs);

 	s->hw.init = &k210_clk_init_data;
 	error = devm_clk_hw_register(&pdev->dev, &s->hw);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register clk");
 		return error;
 	}

 	error = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get,
 					    &s->hw);
 	if (error) {
 		dev_err(&pdev->dev, "adding clk provider failed\n");
 		return error;
 	}

 	return 0;
 }

 static const struct of_device_id k210_sysctl_of_match[] = {
 	{ .compatible = "kendryte,k210-sysctl", },
 	{}
 };

 static struct platform_driver k210_sysctl_driver = {
 	.driver	= {
 		.name		= "k210-sysctl",
 		.of_match_table	= k210_sysctl_of_match,
 	},
 	.probe			= k210_sysctl_probe,
 };

 static int __init k210_sysctl_init(void)
 {
 	return platform_driver_register(&k210_sysctl_driver);
 }
 core_initcall(k210_sysctl_init);

 /*
  * This needs to be called very early during initialization, given that
  * PLL1 needs to be enabled to be able to use all SRAM.
  */
 static void __init k210_soc_early_init(const void *fdt)
 {
 	void __iomem *regs;

 	regs = ioremap(K210_SYSCTL_SYSCTL_BASE_ADDR, 0x1000);
 	if (!regs)
 		panic("K210 sysctl ioremap");

 	/* Enable PLL1 to make the KPU SRAM useable */
 	k210_pll1_enable(regs);

 	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0);

 	k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1,
 		      regs + K210_SYSCTL_CLKEN_CENT);
 	k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC,
 		      regs + K210_SYSCTL_CLKEN_PERI);

 	k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0);

 	iounmap(regs);
 }
 SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init);

 #ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
 /*
  * Generic entry for the default k210.dtb embedded DTB for boards with:
  *   - Vendor ID: 0x4B5
  *   - Arch ID: 0xE59889E6A5A04149 (= "Canaan AI" in UTF-8 encoded Chinese)
  *   - Impl ID:	0x4D41495832303030 (= "MAIX2000")
  * These values are reported by the SiPEED MAXDUINO, SiPEED MAIX GO and
  * SiPEED Dan dock boards.
  */
 SOC_BUILTIN_DTB_DECLARE(k210, 0x4B5, 0xE59889E6A5A04149, 0x4D41495832303030);
 #endif
	// SPDX-License-Identifier: GPL-2.0-or-later
	/*
	* Copyright (c) 2019 Christoph Hellwig.
	* Copyright (c) 2019 Western Digital Corporation or its affiliates.
	*/
	#include <linux/types.h>
	#include <linux/io.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include <linux/clk-provider.h>
	#include <linux/clkdev.h>
	#include <linux/bitfield.h>
	#include <asm/soc.h>

	#define K210_SYSCTL_CLK0_FREQ 26000000UL

	/* Registers base address */
	#define K210_SYSCTL_SYSCTL_BASE_ADDR 0x50440000ULL

	/* Registers */
	#define K210_SYSCTL_PLL0 0x08
	#define K210_SYSCTL_PLL1 0x0c
	/* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */
	#define PLL_RESET (1 << 20)
	#define PLL_PWR (1 << 21)
	#define PLL_INTFB (1 << 22)
	#define PLL_BYPASS (1 << 23)
	#define PLL_TEST (1 << 24)
	#define PLL_OUT_EN (1 << 25)
	#define PLL_TEST_EN (1 << 26)
	#define K210_SYSCTL_PLL_LOCK 0x18
	#define PLL0_LOCK1 (1 << 0)
	#define PLL0_LOCK2 (1 << 1)
	#define PLL0_SLIP_CLEAR (1 << 2)
	#define PLL0_TEST_CLK_OUT (1 << 3)
	#define PLL1_LOCK1 (1 << 8)
	#define PLL1_LOCK2 (1 << 9)
	#define PLL1_SLIP_CLEAR (1 << 10)
	#define PLL1_TEST_CLK_OUT (1 << 11)
	#define PLL2_LOCK1 (1 << 16)
	#define PLL2_LOCK2 (1 << 16)
	#define PLL2_SLIP_CLEAR (1 << 18)
	#define PLL2_TEST_CLK_OUT (1 << 19)
	#define K210_SYSCTL_CLKSEL0 0x20
	#define CLKSEL_ACLK (1 << 0)
	#define K210_SYSCTL_CLKEN_CENT 0x28
	#define CLKEN_CPU (1 << 0)
	#define CLKEN_SRAM0 (1 << 1)
	#define CLKEN_SRAM1 (1 << 2)
	#define CLKEN_APB0 (1 << 3)
	#define CLKEN_APB1 (1 << 4)
	#define CLKEN_APB2 (1 << 5)
	#define K210_SYSCTL_CLKEN_PERI 0x2c
	#define CLKEN_ROM (1 << 0)
	#define CLKEN_DMA (1 << 1)
	#define CLKEN_AI (1 << 2)
	#define CLKEN_DVP (1 << 3)
	#define CLKEN_FFT (1 << 4)
	#define CLKEN_GPIO (1 << 5)
	#define CLKEN_SPI0 (1 << 6)
	#define CLKEN_SPI1 (1 << 7)
	#define CLKEN_SPI2 (1 << 8)
	#define CLKEN_SPI3 (1 << 9)
	#define CLKEN_I2S0 (1 << 10)
	#define CLKEN_I2S1 (1 << 11)
	#define CLKEN_I2S2 (1 << 12)
	#define CLKEN_I2C0 (1 << 13)
	#define CLKEN_I2C1 (1 << 14)
	#define CLKEN_I2C2 (1 << 15)
	#define CLKEN_UART1 (1 << 16)
	#define CLKEN_UART2 (1 << 17)
	#define CLKEN_UART3 (1 << 18)
	#define CLKEN_AES (1 << 19)
	#define CLKEN_FPIO (1 << 20)
	#define CLKEN_TIMER0 (1 << 21)
	#define CLKEN_TIMER1 (1 << 22)
	#define CLKEN_TIMER2 (1 << 23)
	#define CLKEN_WDT0 (1 << 24)
	#define CLKEN_WDT1 (1 << 25)
	#define CLKEN_SHA (1 << 26)
	#define CLKEN_OTP (1 << 27)
	#define CLKEN_RTC (1 << 29)

	struct k210_sysctl {
	void __iomem *regs;
	struct clk_hw hw;
	};

	static void k210_set_bits(u32 val, void __iomem *reg)
	{
	writel(readl(reg) \| val, reg);
	}

	static void k210_clear_bits(u32 val, void __iomem *reg)
	{
	writel(readl(reg) & ~val, reg);
	}

	static void k210_pll1_enable(void __iomem *regs)
	{
	u32 val;

	val = readl(regs + K210_SYSCTL_PLL1);
	val &= ~GENMASK(19, 0); /* clkr1 = 0 */
	val \|= FIELD_PREP(GENMASK(9, 4), 0x3B); /* clkf1 = 59 */
	val \|= FIELD_PREP(GENMASK(13, 10), 0x3); /* clkod1 = 3 */
	val \|= FIELD_PREP(GENMASK(19, 14), 0x3B); /* bwadj1 = 59 */
	writel(val, regs + K210_SYSCTL_PLL1);

	k210_clear_bits(PLL_BYPASS, regs + K210_SYSCTL_PLL1);
	k210_set_bits(PLL_PWR, regs + K210_SYSCTL_PLL1);

	/*
	* Reset the pll. The magic NOPs come from the Kendryte reference SDK.
	*/
	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
	k210_set_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);
	nop();
	nop();
	k210_clear_bits(PLL_RESET, regs + K210_SYSCTL_PLL1);

	for (;;) {
	val = readl(regs + K210_SYSCTL_PLL_LOCK);
	if (val & PLL1_LOCK2)
	break;
	writel(val \| PLL1_SLIP_CLEAR, regs + K210_SYSCTL_PLL_LOCK);
	}

	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL1);
	}

	static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw,
	unsigned long parent_rate)
	{
	struct k210_sysctl *s = container_of(hw, struct k210_sysctl, hw);
	u32 clksel0, pll0;
	u64 pll0_freq, clkr0, clkf0, clkod0;

	/*
	* If the clock selector is not set, use the base frequency.
	* Otherwise, use PLL0 frequency with a frequency divisor.
	*/
	clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0);
	if (!(clksel0 & CLKSEL_ACLK))
	return K210_SYSCTL_CLK0_FREQ;

	/*
	* Get PLL0 frequency:
	* freq = base frequency * clkf0 / (clkr0 * clkod0)
	*/
	pll0 = readl(s->regs + K210_SYSCTL_PLL0);
	clkr0 = 1 + FIELD_GET(GENMASK(3, 0), pll0);
	clkf0 = 1 + FIELD_GET(GENMASK(9, 4), pll0);
	clkod0 = 1 + FIELD_GET(GENMASK(13, 10), pll0);
	pll0_freq = clkf0 * K210_SYSCTL_CLK0_FREQ / (clkr0 * clkod0);

	/* Get the frequency divisor from the clock selector */
	return pll0_freq / (2ULL << FIELD_GET(0x00000006, clksel0));
	}

	static const struct clk_ops k210_sysctl_clk_ops = {
	.recalc_rate = k210_sysctl_clk_recalc_rate,
	};

	static const struct clk_init_data k210_clk_init_data = {
	.name = "k210-sysctl-pll1",
	.ops = &k210_sysctl_clk_ops,
	};

	static int k210_sysctl_probe(struct platform_device *pdev)
	{
	struct k210_sysctl *s;
	int error;

	pr_info("Kendryte K210 SoC sysctl\n");

	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
	if (!s)
	return -ENOMEM;

	s->regs = devm_ioremap_resource(&pdev->dev,
	platform_get_resource(pdev, IORESOURCE_MEM, 0));
	if (IS_ERR(s->regs))
	return PTR_ERR(s->regs);

	s->hw.init = &k210_clk_init_data;
	error = devm_clk_hw_register(&pdev->dev, &s->hw);
	if (error) {
	dev_err(&pdev->dev, "failed to register clk");
	return error;
	}

	error = devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get,
	&s->hw);
	if (error) {
	dev_err(&pdev->dev, "adding clk provider failed\n");
	return error;
	}

	return 0;
	}

	static const struct of_device_id k210_sysctl_of_match[] = {
	{ .compatible = "kendryte,k210-sysctl", },
	{}
	};

	static struct platform_driver k210_sysctl_driver = {
	.driver = {
	.name = "k210-sysctl",
	.of_match_table = k210_sysctl_of_match,
	},
	.probe = k210_sysctl_probe,
	};

	static int __init k210_sysctl_init(void)
	{
	return platform_driver_register(&k210_sysctl_driver);
	}
	core_initcall(k210_sysctl_init);

	/*
	* This needs to be called very early during initialization, given that
	* PLL1 needs to be enabled to be able to use all SRAM.
	*/
	static void __init k210_soc_early_init(const void *fdt)
	{
	void __iomem *regs;

	regs = ioremap(K210_SYSCTL_SYSCTL_BASE_ADDR, 0x1000);
	if (!regs)
	panic("K210 sysctl ioremap");

	/* Enable PLL1 to make the KPU SRAM useable */
	k210_pll1_enable(regs);

	k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0);

	k210_set_bits(CLKEN_CPU \| CLKEN_SRAM0 \| CLKEN_SRAM1,
	regs + K210_SYSCTL_CLKEN_CENT);
	k210_set_bits(CLKEN_ROM \| CLKEN_TIMER0 \| CLKEN_RTC,
	regs + K210_SYSCTL_CLKEN_PERI);

	k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0);

	iounmap(regs);
	}
	SOC_EARLY_INIT_DECLARE(generic_k210, "kendryte,k210", k210_soc_early_init);

	#ifdef CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN
	/*
	* Generic entry for the default k210.dtb embedded DTB for boards with:
	* - Vendor ID: 0x4B5
	* - Arch ID: 0xE59889E6A5A04149 (= "Canaan AI" in UTF-8 encoded Chinese)
	* - Impl ID: 0x4D41495832303030 (= "MAIX2000")
	* These values are reported by the SiPEED MAXDUINO, SiPEED MAIX GO and
	* SiPEED Dan dock boards.
	*/
	SOC_BUILTIN_DTB_DECLARE(k210, 0x4B5, 0xE59889E6A5A04149, 0x4D41495832303030);
	#endif