blob: d295e406a756ede11baae579189deca328636174 [file] [log] [blame]
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-only
echo "Boot config test script"
if [ -d "$1" ]; then
TESTDIR=$1
else
TESTDIR=.
fi
BOOTCONF=${TESTDIR}/bootconfig
INITRD=`mktemp ${TESTDIR}/initrd-XXXX`
TEMPCONF=`mktemp ${TESTDIR}/temp-XXXX.bconf`
OUTFILE=`mktemp ${TESTDIR}/tempout-XXXX`
NG=0
cleanup() {
rm -f $INITRD $TEMPCONF $OUTFILE
exit $NG
}
trap cleanup EXIT TERM
NO=1
xpass() { # pass test command
echo "test case $NO ($3)... "
if ! ($@ && echo "\t\t[OK]"); then
echo "\t\t[NG]"; NG=$((NG + 1))
fi
NO=$((NO + 1))
}
xfail() { # fail test command
echo "test case $NO ($3)... "
if ! (! $@ && echo "\t\t[OK]"); then
echo "\t\t[NG]"; NG=$((NG + 1))
fi
NO=$((NO + 1))
}
echo "Basic command test"
xpass $BOOTCONF $INITRD
echo "Delete command should success without bootconfig"
xpass $BOOTCONF -d $INITRD
dd if=/dev/zero of=$INITRD bs=4096 count=1
echo "key = value;" > $TEMPCONF
bconf_size=$(stat -c %s $TEMPCONF)
initrd_size=$(stat -c %s $INITRD)
echo "Apply command test"
xpass $BOOTCONF -a $TEMPCONF $INITRD
new_size=$(stat -c %s $INITRD)
echo "Show command test"
xpass $BOOTCONF $INITRD
echo "File size check"
xpass test $new_size -eq $(expr $bconf_size + $initrd_size + 9 + 12)
echo "Apply command repeat test"
xpass $BOOTCONF -a $TEMPCONF $INITRD
echo "File size check"
xpass test $new_size -eq $(stat -c %s $INITRD)
echo "Delete command check"
xpass $BOOTCONF -d $INITRD
echo "File size check"
new_size=$(stat -c %s $INITRD)
xpass test $new_size -eq $initrd_size
echo "No error messge while applying"
dd if=/dev/zero of=$INITRD bs=4096 count=1
printf " \0\0\0 \0\0\0" >> $INITRD
$BOOTCONF -a $TEMPCONF $INITRD > $OUTFILE 2>&1
xfail grep -i "failed" $OUTFILE
xfail grep -i "error" $OUTFILE
echo "Max node number check"
echo -n > $TEMPCONF
for i in `seq 1 1024` ; do
echo "node$i" >> $TEMPCONF
done
xpass $BOOTCONF -a $TEMPCONF $INITRD
echo "badnode" >> $TEMPCONF
xfail $BOOTCONF -a $TEMPCONF $INITRD
echo "Max filesize check"
# Max size is 32767 (including terminal byte)
echo -n "data = \"" > $TEMPCONF
dd if=/dev/urandom bs=768 count=32 | base64 -w0 >> $TEMPCONF
echo "\"" >> $TEMPCONF
xfail $BOOTCONF -a $TEMPCONF $INITRD
truncate -s 32764 $TEMPCONF
echo "\"" >> $TEMPCONF # add 2 bytes + terminal ('\"\n\0')
xpass $BOOTCONF -a $TEMPCONF $INITRD
echo "Adding same-key values"
cat > $TEMPCONF << EOF
key = bar, baz
key += qux
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xpass grep -q "bar" $OUTFILE
xpass grep -q "baz" $OUTFILE
xpass grep -q "qux" $OUTFILE
echo "Override same-key values"
cat > $TEMPCONF << EOF
key = bar, baz
key := qux
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xfail grep -q "bar" $OUTFILE
xfail grep -q "baz" $OUTFILE
xpass grep -q "qux" $OUTFILE
echo "Double/single quotes test"
echo "key = '\"string\"';" > $TEMPCONF
$BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $TEMPCONF
cat $TEMPCONF
xpass grep \'\"string\"\' $TEMPCONF
echo "Repeat same-key tree"
cat > $TEMPCONF << EOF
foo
bar
foo { buz }
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xpass grep -q "bar" $OUTFILE
echo "Remove/keep tailing spaces"
cat > $TEMPCONF << EOF
foo = val # comment
bar = "val2 " # comment
EOF
echo > $INITRD
xpass $BOOTCONF -a $TEMPCONF $INITRD
$BOOTCONF $INITRD > $OUTFILE
xfail grep -q val[[:space:]] $OUTFILE
xpass grep -q val2[[:space:]] $OUTFILE
echo "=== expected failure cases ==="
for i in samples/bad-* ; do
xfail $BOOTCONF -a $i $INITRD
done
echo "=== expected success cases ==="
for i in samples/good-* ; do
xpass $BOOTCONF -a $i $INITRD
done
echo
echo "=== Summary ==="
echo "# of Passed: $(expr $NO - $NG - 1)"
echo "# of Failed: $NG"
echo
if [ $NG -eq 0 ]; then
echo "All tests passed"
else
echo "$NG tests failed"
exit 1
fi