| #include "headers.h" |
| |
| |
| |
| #define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00 |
| #define MIPS_CLOCK_REG 0x0f000820 |
| |
| /* DDR INIT-133Mhz */ |
| #define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0F000800, 0x00007212}, |
| {0x0f000820, 0x07F13FFF}, |
| {0x0f000810, 0x00000F95}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF1B00}, |
| {0x0f000870, 0x00000002}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00a04C, 0x0000000C}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020001}, |
| {0x0F007020, 0x04030107}, |
| {0x0F007024, 0x02000007}, |
| {0x0F007028, 0x02020202}, |
| {0x0F00702c, 0x0206060a}, |
| {0x0F007030, 0x05000000}, |
| {0x0F007034, 0x00000003}, |
| {0x0F007038, 0x110a0200}, |
| {0x0F00703C, 0x02101010}, |
| {0x0F007040, 0x45751200}, |
| {0x0F007044, 0x110a0d00}, |
| {0x0F007048, 0x081b0306}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0000001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x0010246c}, |
| {0x0F007064, 0x00000010}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00007000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| /* Enable BW improvement within memory controller */ |
| {0x0F007094, 0x00000104}, |
| /* Enable 2 ports within X-bar */ |
| {0x0F00A000, 0x00000016}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| /* 80Mhz */ |
| #define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000810, 0x00000F95}, |
| {0x0f000820, 0x07f1ffff}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00a000, 0x00000016}, |
| {0x0F00a04C, 0x0000000C}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01000000}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020000}, |
| {0x0F007020, 0x04020107}, |
| {0x0F007024, 0x00000007}, |
| {0x0F007028, 0x02020201}, |
| {0x0F00702c, 0x0204040a}, |
| {0x0F007030, 0x04000000}, |
| {0x0F007034, 0x00000002}, |
| {0x0F007038, 0x1F060200}, |
| {0x0F00703C, 0x1C22221F}, |
| {0x0F007040, 0x8A006600}, |
| {0x0F007044, 0x221a0800}, |
| {0x0F007048, 0x02690204}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0000001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x000A15D6}, |
| {0x0F007064, 0x0000000A}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00004000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| {0x0F007094, 0x00000104}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| /* 100Mhz */ |
| #define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0F000800, 0x00007008}, |
| {0x0f000810, 0x00000F95}, |
| {0x0f000820, 0x07F13E3F}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF1B00}, |
| {0x0f000870, 0x00000002}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00a04C, 0x0000000C}, |
| /* Enable 2 ports within X-bar */ |
| {0x0F00A000, 0x00000016}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020001}, |
| {0x0F007020, 0x04020107}, |
| {0x0F007024, 0x00000007}, |
| {0x0F007028, 0x01020201}, |
| {0x0F00702c, 0x0204040A}, |
| {0x0F007030, 0x06000000}, |
| {0x0F007034, 0x00000004}, |
| {0x0F007038, 0x20080200}, |
| {0x0F00703C, 0x02030320}, |
| {0x0F007040, 0x6E7F1200}, |
| {0x0F007044, 0x01190A00}, |
| {0x0F007048, 0x06120305}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0000001C}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x00082ED6}, |
| {0x0F007064, 0x0000000A}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00005000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| /* Enable BW improvement within memory controller */ |
| {0x0F007094, 0x00000104}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| /* Net T3B DDR Settings |
| * DDR INIT-133Mhz |
| */ |
| static struct bcm_ddr_setting asDPLL_266MHZ[] = { |
| {0x0F000800, 0x00007212}, |
| {0x0f000820, 0x07F13FFF}, |
| {0x0f000810, 0x00000F95}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF1B00}, |
| {0x0f000870, 0x00000002} |
| }; |
| |
| #define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000810, 0x00000F95}, |
| {0x0f000810, 0x00000F95}, |
| {0x0f000810, 0x00000F95}, |
| {0x0f000820, 0x07F13652}, |
| {0x0f000840, 0x0FFF0800}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000880, 0x000003DD}, |
| {0x0f000860, 0x00000000}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| /* Enable 2 ports within X-bar */ |
| {0x0F00A000, 0x00000016}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020001}, |
| {0x0F007020, 0x04030107}, |
| {0x0F007024, 0x02000007}, |
| {0x0F007028, 0x02020202}, |
| {0x0F00702c, 0x0206060a}, |
| {0x0F007030, 0x05000000}, |
| {0x0F007034, 0x00000003}, |
| {0x0F007038, 0x130a0200}, |
| {0x0F00703C, 0x02101012}, |
| {0x0F007040, 0x457D1200}, |
| {0x0F007044, 0x11130d00}, |
| {0x0F007048, 0x040D0306}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0000001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x0010246c}, |
| {0x0F007064, 0x00000012}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00007000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| /* Enable BW improvement within memory controller */ |
| {0x0F007094, 0x00000104}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000}, |
| }; |
| |
| #define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000810, 0x00000F95}, |
| {0x0f000820, 0x07F13FFF}, |
| {0x0f000840, 0x0FFF1F00}, |
| {0x0f000880, 0x000003DD}, |
| {0x0f000860, 0x00000000}, |
| |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00a000, 0x00000016}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01000000}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020000}, |
| {0x0F007020, 0x04020107}, |
| {0x0F007024, 0x00000007}, |
| {0x0F007028, 0x02020201}, |
| {0x0F00702c, 0x0204040a}, |
| {0x0F007030, 0x04000000}, |
| {0x0F007034, 0x02000002}, |
| {0x0F007038, 0x1F060202}, |
| {0x0F00703C, 0x1C22221F}, |
| {0x0F007040, 0x8A006600}, |
| {0x0F007044, 0x221a0800}, |
| {0x0F007048, 0x02690204}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0100001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x000A15D6}, |
| {0x0F007064, 0x0000000A}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00004000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| {0x0F007094, 0x00000104}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| /* 100Mhz */ |
| #define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000810, 0x00000F95}, |
| {0x0f000820, 0x07F1369B}, |
| {0x0f000840, 0x0FFF0800}, |
| {0x0f000880, 0x000003DD}, |
| {0x0f000860, 0x00000000}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| /* Enable 2 ports within X-bar */ |
| {0x0F00A000, 0x00000016}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020000}, |
| {0x0F007020, 0x04020107}, |
| {0x0F007024, 0x00000007}, |
| {0x0F007028, 0x01020201}, |
| {0x0F00702c, 0x0204040A}, |
| {0x0F007030, 0x06000000}, |
| {0x0F007034, 0x02000004}, |
| {0x0F007038, 0x20080200}, |
| {0x0F00703C, 0x02030320}, |
| {0x0F007040, 0x6E7F1200}, |
| {0x0F007044, 0x01190A00}, |
| {0x0F007048, 0x06120305}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0100001C}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x00082ED6}, |
| {0x0F007064, 0x0000000A}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00005000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| /* Enable BW improvement within memory controller */ |
| {0x0F007094, 0x00000104}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| |
| #define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000820, 0x03F1365B}, |
| {0x0f000810, 0x00002F95}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF0000}, |
| {0x0f000860, 0x00000000}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00A000, 0x00000016}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020001}, |
| {0x0F007020, 0x04030107}, |
| {0x0F007024, 0x02000007}, |
| {0x0F007028, 0x02020200}, |
| {0x0F00702c, 0x0206060a}, |
| {0x0F007030, 0x05000000}, |
| {0x0F007034, 0x00000003}, |
| {0x0F007038, 0x200a0200}, |
| {0x0F00703C, 0x02101020}, |
| {0x0F007040, 0x45711200}, |
| {0x0F007044, 0x110D0D00}, |
| {0x0F007048, 0x04080306}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0100001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x0010245F}, |
| {0x0F007064, 0x00000010}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00007000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| {0x0F007088, 0x01000001}, |
| {0x0F00708c, 0x00000101}, |
| {0x0F007090, 0x00000000}, |
| /* Enable BW improvement within memory controller */ |
| {0x0F007094, 0x00040000}, |
| {0x0F007098, 0x00000000}, |
| {0x0F0070c8, 0x00000104}, |
| /* Enable 2 ports within X-bar */ |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| #define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000810, 0x00002F95}, |
| {0x0f000820, 0x03F1369B}, |
| {0x0f000840, 0x0fff0000}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF0000}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020000}, |
| {0x0F007020, 0x04020107}, |
| {0x0F007024, 0x00000007}, |
| {0x0F007028, 0x01020200}, |
| {0x0F00702c, 0x0204040a}, |
| {0x0F007030, 0x06000000}, |
| {0x0F007034, 0x00000004}, |
| {0x0F007038, 0x1F080200}, |
| {0x0F00703C, 0x0203031F}, |
| {0x0F007040, 0x6e001200}, |
| {0x0F007044, 0x011a0a00}, |
| {0x0F007048, 0x03000305}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0100001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x00082ED6}, |
| {0x0F007064, 0x0000000A}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00005000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| {0x0F007088, 0x01000001}, |
| {0x0F00708c, 0x00000101}, |
| {0x0F007090, 0x00000000}, |
| {0x0F007094, 0x00010000}, |
| {0x0F007098, 0x00000000}, |
| {0x0F0070C8, 0x00000104}, |
| /* Enable 2 ports within X-bar */ |
| {0x0F00A000, 0x00000016}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| #define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000820, 0x07F13FFF}, |
| {0x0f000810, 0x00002F95}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| {0x0f000840, 0x0FFF1F00}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0F00a084, 0x1Cffffff}, |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00A000, 0x00000016}, |
| {0x0f007000, 0x00010001}, |
| {0x0f007004, 0x01000000}, |
| {0x0f007008, 0x01000001}, |
| {0x0f00700c, 0x00000000}, |
| {0x0f007010, 0x01000000}, |
| {0x0f007014, 0x01000100}, |
| {0x0f007018, 0x01000000}, |
| {0x0f00701c, 0x01020000}, |
| {0x0f007020, 0x04020107}, |
| {0x0f007024, 0x00000007}, |
| {0x0f007028, 0x02020200}, |
| {0x0f00702c, 0x0204040a}, |
| {0x0f007030, 0x04000000}, |
| {0x0f007034, 0x00000002}, |
| {0x0f007038, 0x1d060200}, |
| {0x0f00703c, 0x1c22221d}, |
| {0x0f007040, 0x8A116600}, |
| {0x0f007044, 0x222d0800}, |
| {0x0f007048, 0x02690204}, |
| {0x0f00704c, 0x00000000}, |
| {0x0f007050, 0x0100001c}, |
| {0x0f007054, 0x00000000}, |
| {0x0f007058, 0x00000000}, |
| {0x0f00705c, 0x00000000}, |
| {0x0f007060, 0x000A15D6}, |
| {0x0f007064, 0x0000000A}, |
| {0x0f007068, 0x00000000}, |
| {0x0f00706c, 0x00000001}, |
| {0x0f007070, 0x00004000}, |
| {0x0f007074, 0x00000000}, |
| {0x0f007078, 0x00000000}, |
| {0x0f00707c, 0x00000000}, |
| {0x0f007080, 0x00000000}, |
| {0x0f007084, 0x00000000}, |
| {0x0f007088, 0x01000001}, |
| {0x0f00708c, 0x00000101}, |
| {0x0f007090, 0x00000000}, |
| {0x0f007094, 0x00010000}, |
| {0x0f007098, 0x00000000}, |
| {0x0F0070C8, 0x00000104}, |
| {0x0F007018, 0x01010000} |
| }; |
| |
| |
| |
| |
| /* T3 LP-B (UMA-B) */ |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000820, 0x03F137DB}, |
| {0x0f000810, 0x01842795}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| {0x0f000840, 0x0FFF0400}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0f003050, 0x00000021}, /* this is flash/eeprom clock divisor which |
| * set the flash clock to 20 MHz */ |
| {0x0F00a084, 0x1Cffffff}, /* Now dump from her in internal memory */ |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00A000, 0x00000016}, |
| {0x0f007000, 0x00010001}, |
| {0x0f007004, 0x01000001}, |
| {0x0f007008, 0x01000101}, |
| {0x0f00700c, 0x00000000}, |
| {0x0f007010, 0x01000100}, |
| {0x0f007014, 0x01000100}, |
| {0x0f007018, 0x01000000}, |
| {0x0f00701c, 0x01020000}, |
| {0x0f007020, 0x04030107}, |
| {0x0f007024, 0x02000007}, |
| {0x0f007028, 0x02020200}, |
| {0x0f00702c, 0x0206060a}, |
| {0x0f007030, 0x050d0d00}, |
| {0x0f007034, 0x00000003}, |
| {0x0f007038, 0x170a0200}, |
| {0x0f00703c, 0x02101012}, |
| {0x0f007040, 0x45161200}, |
| {0x0f007044, 0x11250c00}, |
| {0x0f007048, 0x04da0307}, |
| {0x0f00704c, 0x00000000}, |
| {0x0f007050, 0x0000001c}, |
| {0x0f007054, 0x00000000}, |
| {0x0f007058, 0x00000000}, |
| {0x0f00705c, 0x00000000}, |
| {0x0f007060, 0x00142bb6}, |
| {0x0f007064, 0x20430014}, |
| {0x0f007068, 0x00000000}, |
| {0x0f00706c, 0x00000001}, |
| {0x0f007070, 0x00009000}, |
| {0x0f007074, 0x00000000}, |
| {0x0f007078, 0x00000000}, |
| {0x0f00707c, 0x00000000}, |
| {0x0f007080, 0x00000000}, |
| {0x0f007084, 0x00000000}, |
| {0x0f007088, 0x01000001}, |
| {0x0f00708c, 0x00000101}, |
| {0x0f007090, 0x00000000}, |
| {0x0f007094, 0x00040000}, |
| {0x0f007098, 0x00000000}, |
| {0x0F0070C8, 0x00000104}, |
| {0x0F007018, 0x01010000} |
| }; |
| |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000820, 0x03F1365B}, |
| {0x0f000810, 0x00002F95}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF0000}, |
| {0x0f000860, 0x00000000}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which |
| * set the flash clock to 20 MHz */ |
| {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */ |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00A000, 0x00000016}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020001}, |
| {0x0F007020, 0x04030107}, |
| {0x0F007024, 0x02000007}, |
| {0x0F007028, 0x02020200}, |
| {0x0F00702c, 0x0206060a}, |
| {0x0F007030, 0x05000000}, |
| {0x0F007034, 0x00000003}, |
| {0x0F007038, 0x190a0200}, |
| {0x0F00703C, 0x02101017}, |
| {0x0F007040, 0x45171200}, |
| {0x0F007044, 0x11290D00}, |
| {0x0F007048, 0x04080306}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0100001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x0010245F}, |
| {0x0F007064, 0x00000010}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00007000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| {0x0F007088, 0x01000001}, |
| {0x0F00708c, 0x00000101}, |
| {0x0F007090, 0x00000000}, |
| /* Enable BW improvement within memory controller */ |
| {0x0F007094, 0x00040000}, |
| {0x0F007098, 0x00000000}, |
| {0x0F0070c8, 0x00000104}, |
| /* Enable 2 ports within X-bar */ |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000810, 0x00002F95}, |
| {0x0f000820, 0x03F1369B}, |
| {0x0f000840, 0x0fff0000}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| /* Changed source for X-bar and MIPS clock to APLL */ |
| {0x0f000840, 0x0FFF0000}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which |
| * set the flash clock to 20 MHz */ |
| {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */ |
| {0x0F00a080, 0x1C000000}, |
| /* Memcontroller Default values */ |
| {0x0F007000, 0x00010001}, |
| {0x0F007004, 0x01010100}, |
| {0x0F007008, 0x01000001}, |
| {0x0F00700c, 0x00000000}, |
| {0x0F007010, 0x01000000}, |
| {0x0F007014, 0x01000100}, |
| {0x0F007018, 0x01000000}, |
| {0x0F00701c, 0x01020000}, |
| {0x0F007020, 0x04020107}, |
| {0x0F007024, 0x00000007}, |
| {0x0F007028, 0x01020200}, |
| {0x0F00702c, 0x0204040a}, |
| {0x0F007030, 0x06000000}, |
| {0x0F007034, 0x00000004}, |
| {0x0F007038, 0x1F080200}, |
| {0x0F00703C, 0x0203031F}, |
| {0x0F007040, 0x6e001200}, |
| {0x0F007044, 0x011a0a00}, |
| {0x0F007048, 0x03000305}, |
| {0x0F00704c, 0x00000000}, |
| {0x0F007050, 0x0100001c}, |
| {0x0F007054, 0x00000000}, |
| {0x0F007058, 0x00000000}, |
| {0x0F00705c, 0x00000000}, |
| {0x0F007060, 0x00082ED6}, |
| {0x0F007064, 0x0000000A}, |
| {0x0F007068, 0x00000000}, |
| {0x0F00706c, 0x00000001}, |
| {0x0F007070, 0x00005000}, |
| {0x0F007074, 0x00000000}, |
| {0x0F007078, 0x00000000}, |
| {0x0F00707C, 0x00000000}, |
| {0x0F007080, 0x00000000}, |
| {0x0F007084, 0x00000000}, |
| {0x0F007088, 0x01000001}, |
| {0x0F00708c, 0x00000101}, |
| {0x0F007090, 0x00000000}, |
| {0x0F007094, 0x00010000}, |
| {0x0F007098, 0x00000000}, |
| {0x0F0070C8, 0x00000104}, |
| /* Enable 2 ports within X-bar */ |
| {0x0F00A000, 0x00000016}, |
| /* Enable start bit within memory controller */ |
| {0x0F007018, 0x01010000} |
| }; |
| |
| #define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /* index for 0x0F007000 */ |
| static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = { |
| /* DPLL Clock Setting */ |
| {0x0f000820, 0x07F13FFF}, |
| {0x0f000810, 0x00002F95}, |
| {0x0f000860, 0x00000000}, |
| {0x0f000880, 0x000003DD}, |
| {0x0f000840, 0x0FFF1F00}, |
| {0x0F00a044, 0x1fffffff}, |
| {0x0F00a040, 0x1f000000}, |
| {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor |
| * which set the flash clock to 20 MHz */ |
| {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */ |
| {0x0F00a080, 0x1C000000}, |
| {0x0F00A000, 0x00000016}, |
| {0x0f007000, 0x00010001}, |
| {0x0f007004, 0x01000000}, |
| {0x0f007008, 0x01000001}, |
| {0x0f00700c, 0x00000000}, |
| {0x0f007010, 0x01000000}, |
| {0x0f007014, 0x01000100}, |
| {0x0f007018, 0x01000000}, |
| {0x0f00701c, 0x01020000}, |
| {0x0f007020, 0x04020107}, |
| {0x0f007024, 0x00000007}, |
| {0x0f007028, 0x02020200}, |
| {0x0f00702c, 0x0204040a}, |
| {0x0f007030, 0x04000000}, |
| {0x0f007034, 0x00000002}, |
| {0x0f007038, 0x1d060200}, |
| {0x0f00703c, 0x1c22221d}, |
| {0x0f007040, 0x8A116600}, |
| {0x0f007044, 0x222d0800}, |
| {0x0f007048, 0x02690204}, |
| {0x0f00704c, 0x00000000}, |
| {0x0f007050, 0x0100001c}, |
| {0x0f007054, 0x00000000}, |
| {0x0f007058, 0x00000000}, |
| {0x0f00705c, 0x00000000}, |
| {0x0f007060, 0x000A15D6}, |
| {0x0f007064, 0x0000000A}, |
| {0x0f007068, 0x00000000}, |
| {0x0f00706c, 0x00000001}, |
| {0x0f007070, 0x00004000}, |
| {0x0f007074, 0x00000000}, |
| {0x0f007078, 0x00000000}, |
| {0x0f00707c, 0x00000000}, |
| {0x0f007080, 0x00000000}, |
| {0x0f007084, 0x00000000}, |
| {0x0f007088, 0x01000001}, |
| {0x0f00708c, 0x00000101}, |
| {0x0f007090, 0x00000000}, |
| {0x0f007094, 0x00010000}, |
| {0x0f007098, 0x00000000}, |
| {0x0F0070C8, 0x00000104}, |
| {0x0F007018, 0x01010000} |
| }; |
| |
| |
| int ddr_init(struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ddr_setting *psDDRSetting = NULL; |
| ULONG RegCount = 0; |
| UINT value = 0; |
| UINT uiResetValue = 0; |
| UINT uiClockSetting = 0; |
| int retval = STATUS_SUCCESS; |
| |
| switch (Adapter->chip_id) { |
| case 0xbece3200: |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LP_DDRSetting80MHz; |
| RegCount = (sizeof(asT3LP_DDRSetting80MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3LP_DDRSetting100MHz; |
| RegCount = (sizeof(asT3LP_DDRSetting100MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3LP_DDRSetting133MHz; |
| RegCount = (sizeof(asT3LP_DDRSetting133MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| if (Adapter->bMipsConfig == MIPS_200_MHZ) |
| uiClockSetting = 0x03F13652; |
| else |
| uiClockSetting = 0x03F1365B; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| break; |
| case T3LPB: |
| case BCS220_2: |
| case BCS220_2BC: |
| case BCS250_BC: |
| case BCS220_3: |
| /* Set bit 2 and bit 6 to 1 for BBIC 2mA drive |
| * (please check current value and additionally set these bits) |
| */ |
| if ((Adapter->chip_id != BCS220_2) && |
| (Adapter->chip_id != BCS220_2BC) && |
| (Adapter->chip_id != BCS220_3)) { |
| retval = rdmalt(Adapter, (UINT)0x0f000830, &uiResetValue, |
| sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, __LINE__); |
| return retval; |
| } |
| uiResetValue |= 0x44; |
| retval = wrmalt(Adapter, (UINT)0x0f000830, &uiResetValue, |
| sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, __LINE__); |
| return retval; |
| } |
| } |
| switch (Adapter->DDRSetting) { |
| |
| |
| |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting80MHz; |
| RegCount = (sizeof(asT3B_DDRSetting80MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting100MHz; |
| RegCount = (sizeof(asT3B_DDRSetting100MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting133MHz; |
| RegCount = (sizeof(asT3B_DDRSetting133MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| |
| if (Adapter->bMipsConfig == MIPS_200_MHZ) |
| uiClockSetting = 0x03F13652; |
| else |
| uiClockSetting = 0x03F1365B; |
| break; |
| |
| case DDR_160_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting160MHz; |
| RegCount = sizeof(asT3LPB_DDRSetting160MHz) / |
| sizeof(struct bcm_ddr_setting); |
| |
| if (Adapter->bMipsConfig == MIPS_200_MHZ) |
| uiClockSetting = 0x03F137D2; |
| else |
| uiClockSetting = 0x03F137DB; |
| } |
| break; |
| |
| case 0xbece0110: |
| case 0xbece0120: |
| case 0xbece0121: |
| case 0xbece0130: |
| case 0xbece0300: |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, |
| "DDR Setting: %x\n", Adapter->DDRSetting); |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3_DDRSetting80MHz; |
| RegCount = (sizeof(asT3_DDRSetting80MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3_DDRSetting100MHz; |
| RegCount = (sizeof(asT3_DDRSetting100MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3_DDRSetting133MHz; |
| RegCount = (sizeof(asT3_DDRSetting133MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| default: |
| return -EINVAL; |
| } |
| case 0xbece0310: |
| { |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3B_DDRSetting80MHz; |
| RegCount = (sizeof(asT3B_DDRSetting80MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3B_DDRSetting100MHz; |
| RegCount = (sizeof(asT3B_DDRSetting100MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| break; |
| case DDR_133_MHZ: |
| |
| /* 266Mhz PLL selected. */ |
| if (Adapter->bDPLLConfig == PLL_266_MHZ) { |
| memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ, |
| sizeof(asDPLL_266MHZ)); |
| psDDRSetting = asT3B_DDRSetting133MHz; |
| RegCount = (sizeof(asT3B_DDRSetting133MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| } else { |
| psDDRSetting = asT3B_DDRSetting133MHz; |
| RegCount = (sizeof(asT3B_DDRSetting133MHz) / |
| sizeof(struct bcm_ddr_setting)); |
| if (Adapter->bMipsConfig == MIPS_200_MHZ) |
| uiClockSetting = 0x07F13652; |
| else |
| uiClockSetting = 0x07F1365B; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| value = 0; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, |
| "Register Count is =%lu\n", RegCount); |
| while (RegCount && !retval) { |
| if (uiClockSetting |
| && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG) |
| value = uiClockSetting; |
| else |
| value = psDDRSetting->ulRegValue; |
| retval = wrmalt(Adapter, psDDRSetting->ulRegAddress, &value, |
| sizeof(value)); |
| if (STATUS_SUCCESS != retval) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "%s:%d\n", __func__, __LINE__); |
| break; |
| } |
| |
| RegCount--; |
| psDDRSetting++; |
| } |
| |
| if (Adapter->chip_id >= 0xbece3300) { |
| |
| mdelay(3); |
| if ((Adapter->chip_id != BCS220_2) && |
| (Adapter->chip_id != BCS220_2BC) && |
| (Adapter->chip_id != BCS220_3)) { |
| /* drive MDDR to half in case of UMA-B: */ |
| uiResetValue = 0x01010001; |
| retval = wrmalt(Adapter, (UINT)0x0F007018, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x00040020; |
| retval = wrmalt(Adapter, (UINT)0x0F007094, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x01020101; |
| retval = wrmalt(Adapter, (UINT)0x0F00701c, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x01010000; |
| retval = wrmalt(Adapter, (UINT)0x0F007018, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| } |
| mdelay(3); |
| |
| /* DC/DC standby change... |
| * This is to be done only for Hybrid PMU mode. |
| * with the current h/w there is no way to detect this. |
| * and since we dont have internal PMU lets do it under |
| * UMA-B chip id. we will change this when we will have |
| * internal PMU. |
| */ |
| if (Adapter->PmuMode == HYBRID_MODE_7C) { |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x1322a8; |
| retval = wrmalt(Adapter, (UINT)0x0f000d1c, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x132296; |
| retval = wrmalt(Adapter, (UINT)0x0f000d14, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| } else if (Adapter->PmuMode == HYBRID_MODE_6) { |
| |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x6003229a; |
| retval = wrmalt(Adapter, (UINT)0x0f000d14, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| retval = rdmalt(Adapter, (UINT)0x0f000c00, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| uiResetValue = 0x1322a8; |
| retval = wrmalt(Adapter, (UINT)0x0f000d1c, |
| &uiResetValue, sizeof(uiResetValue)); |
| if (retval < 0) { |
| BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, |
| DBG_LVL_ALL, |
| "%s:%d RDM failed\n", |
| __func__, |
| __LINE__); |
| return retval; |
| } |
| } |
| |
| } |
| Adapter->bDDRInitDone = TRUE; |
| return retval; |
| } |
| |
| int download_ddr_settings(struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ddr_setting *psDDRSetting = NULL; |
| ULONG RegCount = 0; |
| unsigned long ul_ddr_setting_load_addr = |
| DDR_DUMP_INTERNAL_DEVICE_MEMORY; |
| UINT value = 0; |
| int retval = STATUS_SUCCESS; |
| bool bOverrideSelfRefresh = false; |
| |
| switch (Adapter->chip_id) { |
| case 0xbece3200: |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LP_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz); |
| RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3LP_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz); |
| RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3LP_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz); |
| RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| |
| case T3LPB: |
| case BCS220_2: |
| case BCS220_2BC: |
| case BCS250_BC: |
| case BCS220_3: |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting80MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3LPB_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3LPB_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| |
| case DDR_160_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3LPB_DDRSetting160MHz; |
| RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz); |
| RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; |
| psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case 0xbece0300: |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz); |
| RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz); |
| RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| psDDRSetting = asT3_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz); |
| RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case 0xbece0310: |
| { |
| switch (Adapter->DDRSetting) { |
| case DDR_80_MHZ: |
| psDDRSetting = asT3B_DDRSetting80MHz; |
| RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz); |
| RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ; |
| break; |
| case DDR_100_MHZ: |
| psDDRSetting = asT3B_DDRSetting100MHz; |
| RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz); |
| RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ; |
| break; |
| case DDR_133_MHZ: |
| bOverrideSelfRefresh = TRUE; |
| psDDRSetting = asT3B_DDRSetting133MHz; |
| RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz); |
| RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ; |
| break; |
| } |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| /* total number of Register that has to be dumped */ |
| value = RegCount; |
| retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, |
| sizeof(value)); |
| if (retval) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "%s:%d\n", __func__, __LINE__); |
| |
| return retval; |
| } |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| /* signature */ |
| value = (0x1d1e0dd0); |
| retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, |
| sizeof(value)); |
| if (retval) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "%s:%d\n", __func__, __LINE__); |
| return retval; |
| } |
| |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| RegCount *= (sizeof(struct bcm_ddr_setting)/sizeof(ULONG)); |
| |
| while (RegCount && !retval) { |
| value = psDDRSetting->ulRegAddress; |
| retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, |
| sizeof(value)); |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| if (!retval) { |
| if (bOverrideSelfRefresh |
| && (psDDRSetting->ulRegAddress |
| == 0x0F007018)) |
| value = (psDDRSetting->ulRegValue | (1<<8)); |
| else |
| value = psDDRSetting->ulRegValue; |
| |
| if (STATUS_SUCCESS != wrmalt(Adapter, |
| ul_ddr_setting_load_addr, |
| &value, |
| sizeof(value))) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "%s:%d\n", __func__, __LINE__); |
| break; |
| } |
| } |
| ul_ddr_setting_load_addr += sizeof(ULONG); |
| RegCount--; |
| psDDRSetting++; |
| } |
| return retval; |
| } |
