blob: 45024057031456306ba32188dfdaec1ab43d13f8 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 Pin Controller
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
properties:
"#gpio-cells":
const: 3
description:
GPIO consumers must use three arguments, first the number of the
bank, then the pin number inside that bank, and finally the GPIO
flags.
"#interrupt-cells":
const: 3
description:
Interrupts consumers must use three arguments, first the number
of the bank, then the pin number inside that bank, and finally
the interrupts flags.
compatible:
enum:
- allwinner,sun4i-a10-pinctrl
- allwinner,sun5i-a10s-pinctrl
- allwinner,sun5i-a13-pinctrl
- allwinner,sun6i-a31-pinctrl
- allwinner,sun6i-a31-r-pinctrl
- allwinner,sun6i-a31s-pinctrl
- allwinner,sun7i-a20-pinctrl
- allwinner,sun8i-a23-pinctrl
- allwinner,sun8i-a23-r-pinctrl
- allwinner,sun8i-a33-pinctrl
- allwinner,sun8i-a83t-pinctrl
- allwinner,sun8i-a83t-r-pinctrl
- allwinner,sun8i-h3-pinctrl
- allwinner,sun8i-h3-r-pinctrl
- allwinner,sun8i-r40-pinctrl
- allwinner,sun8i-v3-pinctrl
- allwinner,sun8i-v3s-pinctrl
- allwinner,sun9i-a80-pinctrl
- allwinner,sun9i-a80-r-pinctrl
- allwinner,sun20i-d1-pinctrl
- allwinner,sun50i-a64-pinctrl
- allwinner,sun50i-a64-r-pinctrl
- allwinner,sun50i-a100-pinctrl
- allwinner,sun50i-a100-r-pinctrl
- allwinner,sun50i-h5-pinctrl
- allwinner,sun50i-h6-pinctrl
- allwinner,sun50i-h6-r-pinctrl
- allwinner,sun50i-h616-pinctrl
- allwinner,sun50i-h616-r-pinctrl
- allwinner,suniv-f1c100s-pinctrl
- nextthing,gr8-pinctrl
reg:
maxItems: 1
interrupts:
minItems: 1
maxItems: 8
description:
One interrupt per external interrupt bank supported on the
controller, sorted by bank number ascending order.
clocks:
items:
- description: Bus Clock
- description: High Frequency Oscillator
- description: Low Frequency Oscillator
clock-names:
items:
- const: apb
- const: hosc
- const: losc
gpio-controller: true
interrupt-controller: true
gpio-line-names: true
input-debounce:
description:
Debouncing periods in microseconds, one period per interrupt
bank found in the controller
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
patternProperties:
# It's pretty scary, but the basic idea is that:
# - One node name can start with either s- or r- for PRCM nodes,
# - Then, the name itself can be any repetition of <string>- (to
# accommodate with nodes like uart4-rts-cts-pins), where each
# string can be either starting with 'p' but in a string longer
# than 3, or something that doesn't start with 'p',
# - Then, the bank name is optional and will be between pa and pg,
# pl or pm. Some pins groups that have several options will have
# the pin numbers then,
# - Finally, the name will end with either -pin or pins.
"^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$":
type: object
properties:
pins: true
function: true
bias-disable: true
bias-pull-up: true
bias-pull-down: true
drive-strength:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [10, 20, 30, 40]
required:
- pins
- function
additionalProperties: false
"^vcc-p[a-ilm]-supply$":
description:
Power supplies for pin banks.
required:
- "#gpio-cells"
- compatible
- reg
- clocks
- clock-names
- gpio-controller
allOf:
# FIXME: We should have the pin bank supplies here, but not a lot of
# boards are defining it at the moment so it would generate a lot of
# warnings.
- $ref: pinctrl.yaml#
- if:
not:
properties:
compatible:
enum:
- allwinner,sun50i-h616-r-pinctrl
then:
required:
- "#interrupt-cells"
- interrupts
- interrupt-controller
- if:
properties:
compatible:
enum:
- allwinner,sun50i-h616-pinctrl
then:
properties:
interrupts:
minItems: 8
- if:
properties:
compatible:
enum:
- allwinner,sun50i-a100-pinctrl
then:
properties:
interrupts:
minItems: 7
maxItems: 7
- if:
properties:
compatible:
enum:
- allwinner,sun20i-d1-pinctrl
then:
properties:
interrupts:
minItems: 6
maxItems: 6
- if:
properties:
compatible:
enum:
- allwinner,sun9i-a80-pinctrl
then:
properties:
interrupts:
minItems: 5
maxItems: 5
- if:
properties:
compatible:
enum:
- allwinner,sun6i-a31-pinctrl
- allwinner,sun6i-a31s-pinctrl
- allwinner,sun50i-h6-pinctrl
then:
properties:
interrupts:
minItems: 4
maxItems: 4
- if:
properties:
compatible:
enum:
- allwinner,sun8i-a23-pinctrl
- allwinner,sun8i-a83t-pinctrl
- allwinner,sun50i-a64-pinctrl
- allwinner,sun50i-h5-pinctrl
- allwinner,suniv-f1c100s-pinctrl
then:
properties:
interrupts:
minItems: 3
maxItems: 3
- if:
properties:
compatible:
enum:
- allwinner,sun6i-a31-r-pinctrl
- allwinner,sun8i-a33-pinctrl
- allwinner,sun8i-h3-pinctrl
- allwinner,sun8i-v3-pinctrl
- allwinner,sun8i-v3s-pinctrl
- allwinner,sun9i-a80-r-pinctrl
- allwinner,sun50i-h6-r-pinctrl
then:
properties:
interrupts:
minItems: 2
maxItems: 2
- if:
properties:
compatible:
enum:
- allwinner,sun4i-a10-pinctrl
- allwinner,sun5i-a10s-pinctrl
- allwinner,sun5i-a13-pinctrl
- allwinner,sun7i-a20-pinctrl
- allwinner,sun8i-a23-r-pinctrl
- allwinner,sun8i-a83t-r-pinctrl
- allwinner,sun8i-h3-r-pinctrl
- allwinner,sun8i-r40-pinctrl
- allwinner,sun50i-a64-r-pinctrl
- allwinner,sun50i-a100-r-pinctrl
- nextthing,gr8-pinctrl
then:
properties:
interrupts:
minItems: 1
maxItems: 1
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/sun5i-ccu.h>
pio: pinctrl@1c20800 {
compatible = "allwinner,sun5i-a13-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
uart1_pe_pins: uart1-pe-pins {
pins = "PE10", "PE11";
function = "uart1";
};
uart1_pg_pins: uart1-pg-pins {
pins = "PG3", "PG4";
function = "uart1";
};
};