blob: 7bd723ab12814328ec477394c6665ece2bfd3d07 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale IMX7D IOMUX Controller
maintainers:
- Dong Aisheng <aisheng.dong@nxp.com>
description:
Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
for common binding part and usage.
properties:
compatible:
oneOf:
- enum:
- fsl,imx7d-iomuxc
- fsl,imx7d-iomuxc-lpsr
reg:
maxItems: 1
fsl,input-sel:
description:
phandle for main iomuxc controller which shares the input select
register for daisy chain settings.
$ref: /schemas/types.yaml#/definitions/phandle
# Client device subnode's properties
patternProperties:
'grp$':
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
properties:
fsl,pins:
description:
each entry consists of 6 integers and represents the mux and config
setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer
CONFIG is the pad setting value like pull-up on this pin. Please
refer to i.MX7D Reference Manual for detailed CONFIG settings.
$ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description: |
"mux_reg" indicates the offset of mux register.
- description: |
"conf_reg" indicates the offset of pad configuration register.
- description: |
"input_reg" indicates the offset of select input register.
- description: |
"mux_val" indicates the mux value to be applied.
- description: |
"input_val" indicates the select input value to be applied.
- description: |
"pad_setting" indicates the pad configuration value to be applied.
required:
- fsl,pins
additionalProperties: false
allOf:
- $ref: pinctrl.yaml#
required:
- compatible
- reg
if:
properties:
compatible:
contains:
enum:
- fsl,imx7d-iomuxc-lpsr
then:
required:
- fsl,input-sel
additionalProperties: false
examples:
- |
iomuxc: pinctrl@30330000 {
compatible = "fsl,imx7d-iomuxc";
reg = <0x30330000 0x10000>;
pinctrl_uart5: uart5grp {
fsl,pins =
<0x0160 0x03D0 0x0714 0x1 0x0 0x7e>,
<0x0164 0x03D4 0x0000 0x1 0x0 0x76>;
};
};
- |
iomuxc_lpsr: pinctrl@302c0000 {
compatible = "fsl,imx7d-iomuxc-lpsr";
reg = <0x302c0000 0x10000>;
fsl,input-sel = <&iomuxc>;
pinctrl_gpio_lpsr: gpio1-grp {
fsl,pins =
<0x0008 0x0038 0x0000 0x0 0x0 0x59>,
<0x000C 0x003C 0x0000 0x0 0x0 0x59>;
};
};