blob: 1686427eb8547f4432ff8bf60835af526163d8d3 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8192-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek MT8192 Pin Controller
maintainers:
- Sean Wang <sean.wang@mediatek.com>
description:
The MediaTek's MT8192 Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt8192-pinctrl
gpio-controller: true
'#gpio-cells':
description:
Number of cells in GPIO specifier. Since the generic GPIO binding is used,
the amount of cells must be specified as 2. See the below mentioned gpio
binding representation for description of particular cells.
const: 2
gpio-ranges:
description: GPIO valid number range.
maxItems: 1
gpio-line-names: true
reg:
description:
Physical address base for GPIO base registers. There are 11 GPIO physical
address base in mt8192.
maxItems: 11
reg-names:
description:
GPIO base register names.
maxItems: 11
interrupt-controller: true
'#interrupt-cells':
const: 2
interrupts:
description: The interrupt outputs to sysirq.
maxItems: 1
# PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'^pins':
type: object
description:
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
$ref: pinmux-node.yaml
properties:
pinmux:
description:
Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
drive-strength:
description:
It can support some arguments, such as MTK_DRIVE_4mA,
MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. It can only
support 2/4/6/8/10/12/14/16mA in mt8192.
enum: [2, 4, 6, 8, 10, 12, 14, 16]
drive-strength-microamp:
enum: [125, 250, 500, 1000]
bias-pull-down:
oneOf:
- type: boolean
description: normal pull down.
- enum: [100, 101, 102, 103]
description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
defines in dt-bindings/pinctrl/mt65xx.h.
- enum: [200, 201, 202, 203]
description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines
in dt-bindings/pinctrl/mt65xx.h.
bias-pull-up:
oneOf:
- type: boolean
description: normal pull up.
- enum: [100, 101, 102, 103]
description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
defines in dt-bindings/pinctrl/mt65xx.h.
- enum: [200, 201, 202, 203]
description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines
in dt-bindings/pinctrl/mt65xx.h.
bias-disable: true
output-high: true
output-low: true
input-enable: true
input-disable: true
input-schmitt-enable: true
input-schmitt-disable: true
required:
- pinmux
additionalProperties: false
allOf:
- $ref: pinctrl.yaml#
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pio: pinctrl@10005000 {
compatible = "mediatek,mt8192-pinctrl";
reg = <0x10005000 0x1000>,
<0x11c20000 0x1000>,
<0x11d10000 0x1000>,
<0x11d30000 0x1000>,
<0x11d40000 0x1000>,
<0x11e20000 0x1000>,
<0x11e70000 0x1000>,
<0x11ea0000 0x1000>,
<0x11f20000 0x1000>,
<0x11f30000 0x1000>,
<0x1000b000 0x1000>;
reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
"iocfg_bl", "iocfg_br", "iocfg_lm",
"iocfg_lb", "iocfg_rt", "iocfg_lt",
"iocfg_tl", "eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 220>;
interrupt-controller;
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
#interrupt-cells = <2>;
spi1-default-pins {
pins-cs-mosi-clk {
pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
<PINMUX_GPIO159__FUNC_SPI1_A_MO>,
<PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
bias-disable;
};
pins-miso {
pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
bias-pull-down;
};
};
};