blob: 42a60f3dd5d142fcd1556939b897ae5446db9505 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
* Copyright (C) 2020 Sartura Ltd.
*
* Device Tree file for IEI Puzzle-M801
*/
#include "armada-8040.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/ {
model = "IEI-Puzzle-M801";
compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
aliases {
ethernet0 = &cp0_eth0;
ethernet1 = &cp1_eth0;
ethernet2 = &cp0_eth1;
ethernet3 = &cp0_eth2;
ethernet4 = &cp1_eth1;
ethernet5 = &cp1_eth2;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
/* Regulator labels correspond with schematics */
v_3_3: regulator-3-3v {
compatible = "regulator-fixed";
regulator-name = "v_3_3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
status = "okay";
};
v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_xhci_vbus_pins>;
regulator-name = "v_5v0_usb3_hst_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
status = "okay";
};
v_vddo_h: regulator-1-8v {
compatible = "regulator-fixed";
regulator-name = "v_vddo_h";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
status = "okay";
};
sfp_cp0_eth0: sfp-cp0-eth0 {
compatible = "sff,sfp";
i2c-bus = <&sfpplus0_i2c>;
los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
sfp_cp1_eth0: sfp-cp1-eth0 {
compatible = "sff,sfp";
i2c-bus = <&sfpplus1_i2c>;
los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
maximum-power-milliwatt = <3000>;
};
leds {
compatible = "gpio-leds";
status = "okay";
pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>;
pinctrl-names = "default";
led-0 {
/* SFP+ port 2: Activity */
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>;
};
led-1 {
/* SFP+ port 1: Activity */
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>;
};
led-2 {
/* SFP+ port 2: 10 Gbps indicator */
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>;
};
led-3 {
/* SFP+ port 2: 1 Gbps indicator */
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>;
};
led-4 {
/* SFP+ port 1: 10 Gbps indicator */
function = LED_FUNCTION_LAN;
function-enumerator = <4>;
gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
};
led-5 {
/* SFP+ port 1: 1 Gbps indicator */
function = LED_FUNCTION_LAN;
function-enumerator = <5>;
gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>;
};
led-6 {
function = LED_FUNCTION_DISK;
linux,default-trigger = "disk-activity";
gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
};
};
};
&ap_sdhci0 {
bus-width = <8>;
/*
* Not stable in HS modes - phy needs "more calibration", so add
* the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
*/
marvell,xenon-phy-slow-mode;
no-1-8-v;
no-sd;
no-sdio;
non-removable;
status = "okay";
vqmmc-supply = <&v_vddo_h>;
};
&ap_thermal_cpu1 {
trips {
cpu_active: cpu-active {
temperature = <44000>;
hysteresis = <2000>;
type = "active";
};
};
cooling-maps {
fan-map {
trip = <&cpu_active>;
cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>,
<&chassis_fan_group1 64 THERMAL_NO_LIMIT>;
};
};
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
rtc@32 {
compatible = "epson,rx8010";
reg = <0x32>;
};
};
&spi0 {
status = "okay";
flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
partition@u-boot {
label = "u-boot";
reg = <0x00000000 0x001f0000>;
};
partition@u-boot-env {
label = "u-boot-env";
reg = <0x001f0000 0x00010000>;
};
partition@ubi1 {
label = "ubi1";
reg = <0x00200000 0x03f00000>;
};
partition@ubi2 {
label = "ubi2";
reg = <0x04100000 0x03f00000>;
};
};
};
&uart0 {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&uart1 {
status = "okay";
/* IEI WT61P803 PUZZLE MCU Controller */
mcu {
compatible = "iei,wt61p803-puzzle";
current-speed = <115200>;
enable-beep;
leds {
compatible = "iei,wt61p803-puzzle-leds";
#address-cells = <1>;
#size-cells = <0>;
led@0 {
reg = <0>;
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_BLUE>;
};
};
hwmon {
compatible = "iei,wt61p803-puzzle-hwmon";
#address-cells = <1>;
#size-cells = <0>;
chassis_fan_group0:fan-group@0 {
#cooling-cells = <2>;
reg = <0x00>;
cooling-levels = <64 102 170 230 250>;
};
chassis_fan_group1:fan-group@1 {
#cooling-cells = <2>;
reg = <0x01>;
cooling-levels = <64 102 170 230 250>;
};
};
};
};
&cp0_rtc {
status = "disabled";
};
&cp0_i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c0_pins>;
status = "okay";
sfpplus_gpio: gpio@21 {
compatible = "nxp,pca9555";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@54 {
compatible = "atmel,24c04";
reg = <0x54>;
};
};
&cp0_i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_i2c1_pins>;
status = "okay";
i2c-mux@70 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
sfpplus0_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
sfpplus1_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
&cp0_uart1 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_uart1_pins>;
status = "okay";
};
&cp0_mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ge_phy2: ethernet-phy@0 {
reg = <0>;
};
ge_phy3: ethernet-phy@1 {
reg = <1>;
};
};
&cp0_pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&cp0_pcie_pins>;
num-lanes = <1>;
num-viewport = <8>;
reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
phys = <&cp0_comphy0 0>;
phy-names = "cp0-pcie0-x1-phy";
status = "okay";
};
&cp0_pinctrl {
cp0_ge_mdio_pins: ge-mdio-pins {
marvell,pins = "mpp32", "mpp34";
marvell,function = "ge";
};
cp0_i2c1_pins: i2c1-pins {
marvell,pins = "mpp35", "mpp36";
marvell,function = "i2c1";
};
cp0_i2c0_pins: i2c0-pins {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
cp0_uart1_pins: uart1-pins {
marvell,pins = "mpp40", "mpp41";
marvell,function = "uart1";
};
cp0_xhci_vbus_pins: xhci0-vbus-pins {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
cp0_pcie_pins: pcie-pins {
marvell,pins = "mpp52";
marvell,function = "gpio";
};
cp0_sdhci_pins: sdhci-pins {
marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
"mpp60", "mpp61";
marvell,function = "sdio";
};
cp0_sfpplus_led_pins: sfpplus-led-pins {
marvell,pins = "mpp54";
marvell,function = "gpio";
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth0 {
status = "okay";
phy-mode = "10gbase-r";
phys = <&cp0_comphy4 0>;
local-mac-address = [ae 00 00 00 ff 00];
sfp = <&sfp_cp0_eth0>;
managed = "in-band-status";
};
&cp0_eth1 {
status = "okay";
phy = <&ge_phy2>;
phy-mode = "sgmii";
local-mac-address = [ae 00 00 00 ff 01];
phys = <&cp0_comphy3 1>;
};
&cp0_eth2 {
status = "okay";
phy-mode = "sgmii";
phys = <&cp0_comphy1 2>;
local-mac-address = [ae 00 00 00 ff 02];
phy = <&ge_phy3>;
};
&cp0_sata0 {
status = "okay";
sata-port@0 {
phys = <&cp0_comphy2 0>;
phy-names = "cp0-sata0-0-phy";
};
sata-port@1 {
phys = <&cp0_comphy5 1>;
phy-names = "cp0-sata0-1-phy";
};
};
&cp0_sdhci0 {
broken-cd;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sdhci_pins>;
status = "okay";
vqmmc-supply = <&v_3_3>;
};
&cp0_usb3_0 {
status = "okay";
};
&cp0_usb3_1 {
status = "okay";
};
&cp1_i2c0 {
clock-frequency = <100000>;
status = "disabled";
};
&cp1_i2c1 {
clock-frequency = <100000>;
status = "disabled";
};
&cp1_rtc {
status = "disabled";
};
&cp1_ethernet {
status = "okay";
};
&cp1_eth0 {
status = "okay";
phy-mode = "10gbase-r";
phys = <&cp1_comphy4 0>;
local-mac-address = [ae 00 00 00 ff 03];
sfp = <&sfp_cp1_eth0>;
managed = "in-band-status";
};
&cp1_eth1 {
status = "okay";
phy = <&ge_phy4>;
phy-mode = "sgmii";
local-mac-address = [ae 00 00 00 ff 04];
phys = <&cp1_comphy3 1>;
};
&cp1_eth2 {
status = "okay";
phy-mode = "sgmii";
local-mac-address = [ae 00 00 00 ff 05];
phys = <&cp1_comphy5 2>;
phy = <&ge_phy5>;
};
&cp1_pinctrl {
cp1_sfpplus_led_pins: sfpplus-led-pins {
marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31";
marvell,function = "gpio";
};
};
&cp1_uart0 {
status = "disabled";
};
&cp1_comphy2 {
cp1_usbh0_con: connector {
compatible = "usb-a-connector";
phy-supply = <&v_5v0_usb3_hst_vbus>;
};
};
&cp1_usb3_0 {
phys = <&cp1_comphy2 0>;
phy-names = "cp1-usb3h0-comphy";
status = "okay";
};
&cp1_mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ge_phy4: ethernet-phy@1 {
reg = <1>;
};
ge_phy5: ethernet-phy@0 {
reg = <0>;
};
};
&cp1_pcie0 {
num-lanes = <2>;
phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy";
status = "okay";
};