blob: 98ab083560887ce2c89ca7e4cc63a134ae42a790 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
*/
#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
#include <dt-bindings/clock/qcom,gcc-sm6125.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "sleep_clk";
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x0>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x2>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x3>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1638>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1638>;
next-level-cache = <&L2_1>;
};
CPU6: cpu@102 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1638>;
next-level-cache = <&L2_1>;
};
CPU7: cpu@103 {
device_type = "cpu";
compatible = "qcom,kryo260";
reg = <0x0 0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1638>;
next-level-cache = <&L2_1>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
};
};
firmware {
scm: scm {
compatible = "qcom,scm-sm6125", "qcom,scm";
#reset-cells = <1>;
};
};
memory@40000000 {
/* We expect the bootloader to fill in the size */
reg = <0x0 0x40000000 0x0 0x0>;
device_type = "memory";
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-sm6125";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
rpmpd: power-controller {
compatible = "qcom,sm6125-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_no_cpr: opp10 {
opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
};
};
};
};
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: memory@45700000 {
reg = <0x0 0x45700000 0x0 0x600000>;
no-map;
};
xbl_aop_mem: memory@45e00000 {
reg = <0x0 0x45e00000 0x0 0x140000>;
no-map;
};
sec_apps_mem: memory@45fff000 {
reg = <0x0 0x45fff000 0x0 0x1000>;
no-map;
};
smem_mem: memory@46000000 {
reg = <0x0 0x46000000 0x0 0x200000>;
no-map;
};
reserved_mem1: memory@46200000 {
reg = <0x0 0x46200000 0x0 0x2d00000>;
no-map;
};
camera_mem: memory@4ab00000 {
reg = <0x0 0x4ab00000 0x0 0x500000>;
no-map;
};
modem_mem: memory@4b000000 {
reg = <0x0 0x4b000000 0x0 0x7e00000>;
no-map;
};
venus_mem: memory@52e00000 {
reg = <0x0 0x52e00000 0x0 0x500000>;
no-map;
};
wlan_msa_mem: memory@53300000 {
reg = <0x0 0x53300000 0x0 0x200000>;
no-map;
};
cdsp_mem: memory@53500000 {
reg = <0x0 0x53500000 0x0 0x1e00000>;
no-map;
};
adsp_pil_mem: memory@55300000 {
reg = <0x0 0x55300000 0x0 0x1e00000>;
no-map;
};
ipa_fw_mem: memory@57100000 {
reg = <0x0 0x57100000 0x0 0x10000>;
no-map;
};
ipa_gsi_mem: memory@57110000 {
reg = <0x0 0x57110000 0x0 0x5000>;
no-map;
};
gpu_mem: memory@57115000 {
reg = <0x0 0x57115000 0x0 0x2000>;
no-map;
};
cont_splash_mem: memory@5c000000 {
reg = <0x0 0x5c000000 0x0 0x00f00000>;
no-map;
};
dfps_data_mem: memory@5cf00000 {
reg = <0x0 0x5cf00000 0x0 0x0100000>;
no-map;
};
cdsp_sec_mem: memory@5f800000 {
reg = <0x0 0x5f800000 0x0 0x1e00000>;
no-map;
};
qseecom_mem: memory@5e400000 {
reg = <0x0 0x5e400000 0x0 0x1400000>;
no-map;
};
sdsp_mem: memory@f3000000 {
reg = <0x0 0xf3000000 0x0 0x400000>;
no-map;
};
adsp_mem: memory@f3400000 {
reg = <0x0 0xf3400000 0x0 0x800000>;
no-map;
};
qseecom_ta_mem: memory@13fc00000 {
reg = <0x1 0x3fc00000 0x0 0x400000>;
no-map;
};
};
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00 0x00 0x00 0xffffffff>;
compatible = "simple-bus";
tcsr_mutex: hwlock@340000 {
compatible = "qcom,tcsr-mutex";
reg = <0x00340000 0x20000>;
#hwlock-cells = <1>;
};
tlmm: pinctrl@500000 {
compatible = "qcom,sm6125-tlmm";
reg = <0x00500000 0x400000>,
<0x00900000 0x400000>,
<0x00d00000 0x400000>;
reg-names = "west", "south", "east";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 134>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
sdc2_off_state: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <2>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <2>;
bias-pull-up;
};
};
sdc2_on_state: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <10>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <10>;
bias-pull-up;
};
};
qup_i2c0_default: qup-i2c0-default-state {
pins = "gpio0", "gpio1";
function = "qup00";
drive-strength = <2>;
bias-disable;
};
qup_i2c0_sleep: qup-i2c0-sleep-state {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c1_default: qup-i2c1-default-state {
pins = "gpio4", "gpio5";
function = "qup01";
drive-strength = <2>;
bias-disable;
};
qup_i2c1_sleep: qup-i2c1-sleep-state {
pins = "gpio4", "gpio5";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c2_default: qup-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "qup02";
drive-strength = <2>;
bias-disable;
};
qup_i2c2_sleep: qup-i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c3_default: qup-i2c3-default-state {
pins = "gpio14", "gpio15";
function = "qup03";
drive-strength = <2>;
bias-disable;
};
qup_i2c3_sleep: qup-i2c3-sleep-state {
pins = "gpio14", "gpio15";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c4_default: qup-i2c4-default-state {
pins = "gpio16", "gpio17";
function = "qup04";
drive-strength = <2>;
bias-disable;
};
qup_i2c4_sleep: qup-i2c4-sleep-state {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c5_default: qup-i2c5-default-state {
pins = "gpio22", "gpio23";
function = "qup10";
drive-strength = <2>;
bias-disable;
};
qup_i2c5_sleep: qup-i2c5-sleep-state {
pins = "gpio22", "gpio23";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c6_default: qup-i2c6-default-state {
pins = "gpio30", "gpio31";
function = "qup11";
drive-strength = <2>;
bias-disable;
};
qup_i2c6_sleep: qup-i2c6-sleep-state {
pins = "gpio30", "gpio31";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c7_default: qup-i2c7-default-state {
pins = "gpio28", "gpio29";
function = "qup12";
drive-strength = <2>;
bias-disable;
};
qup_i2c7_sleep: qup-i2c7-sleep-state {
pins = "gpio28", "gpio29";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c8_default: qup-i2c8-default-state {
pins = "gpio18", "gpio19";
function = "qup13";
drive-strength = <2>;
bias-disable;
};
qup_i2c8_sleep: qup-i2c8-sleep-state {
pins = "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_i2c9_default: qup-i2c9-default-state {
pins = "gpio10", "gpio11";
function = "qup14";
drive-strength = <2>;
bias-disable;
};
qup_i2c9_sleep: qup-i2c9-sleep-state {
pins = "gpio10", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
qup_spi0_default: qup-spi0-default-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "qup00";
drive-strength = <6>;
bias-disable;
};
qup_spi0_sleep: qup-spi0-sleep-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
qup_spi2_default: qup-spi2-default-state {
pins = "gpio6", "gpio7", "gpio8", "gpio9";
function = "qup02";
drive-strength = <6>;
bias-disable;
};
qup_spi2_sleep: qup-spi2-sleep-state {
pins = "gpio6", "gpio7", "gpio8", "gpio9";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
qup_spi5_default: qup-spi5-default-state {
pins = "gpio22", "gpio23", "gpio24", "gpio25";
function = "qup10";
drive-strength = <6>;
bias-disable;
};
qup_spi5_sleep: qup-spi5-sleep-state {
pins = "gpio22", "gpio23", "gpio24", "gpio25";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
qup_spi6_default: qup-spi6-default-state {
pins = "gpio30", "gpio31", "gpio32", "gpio33";
function = "qup11";
drive-strength = <6>;
bias-disable;
};
qup_spi6_sleep: qup-spi6-sleep-state {
pins = "gpio30", "gpio31", "gpio32", "gpio33";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
qup_spi8_default: qup-spi8-default-state {
pins = "gpio18", "gpio19", "gpio20", "gpio21";
function = "qup13";
drive-strength = <6>;
bias-disable;
};
qup_spi8_sleep: qup-spi8-sleep-state {
pins = "gpio18", "gpio19", "gpio20", "gpio21";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
qup_spi9_default: qup-spi9-default-state {
pins = "gpio10", "gpio11", "gpio12", "gpio13";
function = "qup14";
drive-strength = <6>;
bias-disable;
};
qup_spi9_sleep: qup-spi9-sleep-state {
pins = "gpio10", "gpio11", "gpio12", "gpio13";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
};
gcc: clock-controller@1400000 {
compatible = "qcom,gcc-sm6125";
reg = <0x01400000 0x1f0000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clock-names = "bi_tcxo", "sleep_clk";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
};
hsusb_phy1: phy@1613000 {
compatible = "qcom,msm8996-qusb2-phy";
reg = <0x01613000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
status = "disabled";
};
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x01c40000 0x1100>,
<0x01e00000 0x2000000>,
<0x03e00000 0x100000>,
<0x03f00000 0xa0000>,
<0x01c0a000 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x045f0000 0x7000>;
};
sdhc_1: mmc@4744000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
reg-names = "hc", "cqhci";
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x160 0x0>;
power-domains = <&rpmpd SM6125_VDDCX>;
qcom,dll-config = <0x000f642c>;
qcom,ddr-config = <0x80040873>;
bus-width = <8>;
non-removable;
supports-cqe;
status = "disabled";
};
sdhc_2: mmc@4784000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
reg = <0x04784000 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
iommus = <&apps_smmu 0x180 0x0>;
pinctrl-0 = <&sdc2_on_state>;
pinctrl-1 = <&sdc2_off_state>;
pinctrl-names = "default", "sleep";
power-domains = <&rpmpd SM6125_VDDCX>;
qcom,dll-config = <0x0007642c>;
qcom,ddr-config = <0x80040873>;
bus-width = <4>;
status = "disabled";
};
ufs_mem_hc: ufs@4804000 {
compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
clock-names = "core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"ice_core_clk";
freq-table-hz = <50000000 240000000>,
<0 0>,
<0 0>,
<37500000 150000000>,
<0 0>,
<0 0>,
<0 0>,
<75000000 300000000>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
#reset-cells = <1>;
phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <1>;
iommus = <&apps_smmu 0x200 0x0>;
status = "disabled";
};
ufs_mem_phy: phy@4807000 {
compatible = "qcom,sm6125-qmp-ufs-phy";
reg = <0x04807000 0xdb8>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
<&gcc GCC_UFS_MEM_CLKREF_CLK>;
clock-names = "ref",
"ref_aux",
"qref";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
power-domains = <&gcc UFS_PHY_GDSC>;
#phy-cells = <0>;
status = "disabled";
};
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x04a00000 0x60000>;
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <8>;
dma-channel-mask = <0x1f>;
iommus = <&apps_smmu 0x136 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_0: geniqup@4ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x04ac0000 0x2000>;
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
iommus = <&apps_smmu 0x123 0x0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
i2c0: i2c@4a80000 {
compatible = "qcom,geni-i2c";
reg = <0x04a80000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c0_default>;
pinctrl-1 = <&qup_i2c0_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi0: spi@4a80000 {
compatible = "qcom,geni-spi";
reg = <0x04a80000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_spi0_default>;
pinctrl-1 = <&qup_spi0_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@4a84000 {
compatible = "qcom,geni-i2c";
reg = <0x04a84000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c1_default>;
pinctrl-1 = <&qup_i2c1_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@4a88000 {
compatible = "qcom,geni-i2c";
reg = <0x04a88000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c2_default>;
pinctrl-1 = <&qup_i2c2_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@4a88000 {
compatible = "qcom,geni-spi";
reg = <0x04a88000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_spi2_default>;
pinctrl-1 = <&qup_spi2_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@4a8c000 {
compatible = "qcom,geni-i2c";
reg = <0x04a8c000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c3_default>;
pinctrl-1 = <&qup_i2c3_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
reg = <0x04a90000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c4_default>;
pinctrl-1 = <&qup_i2c4_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gpi_dma1: dma-controller@4c00000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
reg = <0x04c00000 0x60000>;
interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <8>;
dma-channel-mask = <0x0f>;
iommus = <&apps_smmu 0x156 0x0>;
#dma-cells = <3>;
status = "disabled";
};
qupv3_id_1: geniqup@4cc0000 {
compatible = "qcom,geni-se-qup";
reg = <0x04cc0000 0x2000>;
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
iommus = <&apps_smmu 0x143 0x0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
i2c5: i2c@4c80000 {
compatible = "qcom,geni-i2c";
reg = <0x04c80000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c5_default>;
pinctrl-1 = <&qup_i2c5_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi5: spi@4c80000 {
compatible = "qcom,geni-spi";
reg = <0x04c80000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_spi5_default>;
pinctrl-1 = <&qup_spi5_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c6: i2c@4c84000 {
compatible = "qcom,geni-i2c";
reg = <0x04c84000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c6_default>;
pinctrl-1 = <&qup_i2c6_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi6: spi@4c84000 {
compatible = "qcom,geni-spi";
reg = <0x04c84000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_spi6_default>;
pinctrl-1 = <&qup_spi6_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c7: i2c@4c88000 {
compatible = "qcom,geni-i2c";
reg = <0x04c88000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c7_default>;
pinctrl-1 = <&qup_i2c7_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c8: i2c@4c8c000 {
compatible = "qcom,geni-i2c";
reg = <0x04c8c000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c8_default>;
pinctrl-1 = <&qup_i2c8_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi8: spi@4c8c000 {
compatible = "qcom,geni-spi";
reg = <0x04c8c000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_spi8_default>;
pinctrl-1 = <&qup_spi8_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c9: i2c@4c90000 {
compatible = "qcom,geni-i2c";
reg = <0x04c90000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_i2c9_default>;
pinctrl-1 = <&qup_i2c9_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi9: spi@4c90000 {
compatible = "qcom,geni-spi";
reg = <0x04c90000 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&qup_spi9_default>;
pinctrl-1 = <&qup_spi9_sleep>;
pinctrl-names = "default", "sleep";
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
usb3: usb@4ef8800 {
compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
reg = <0x04ef8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi",
"xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <66666667>;
interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
"qusb2_phy",
"hs_phy_irq",
"ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
qcom,select-utmi-as-pipe-clk;
status = "disabled";
usb3_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
reg = <0x04e00000 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x100 0x0>;
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
maximum-speed = "high-speed";
dr_mode = "peripheral";
};
};
sram@4690000 {
compatible = "qcom,rpm-stats";
reg = <0x04690000 0x10000>;
};
mdss: display-subsystem@5e00000 {
compatible = "qcom,sm6125-mdss";
reg = <0x05e00000 0x1000>;
reg-names = "mdss";
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface",
"ahb",
"core";
power-domains = <&dispcc MDSS_GDSC>;
iommus = <&apps_smmu 0x400 0x0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
mdss_mdp: display-controller@5e01000 {
compatible = "qcom,sm6125-dpu";
reg = <0x05e01000 0x83208>,
<0x05eb0000 0x2008>;
reg-names = "mdp", "vbif";
interrupt-parent = <&mdss>;
interrupts = <0>;
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_ROT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
<&gcc GCC_DISP_THROTTLE_CORE_CLK>;
clock-names = "bus",
"iface",
"rot",
"lut",
"core",
"vsync",
"throttle";
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmpd SM6125_VDDCX>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-192000000 {
opp-hz = /bits/ 64 <192000000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-256000000 {
opp-hz = /bits/ 64 <256000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-307200000 {
opp-hz = /bits/ 64 <307200000>;
required-opps = <&rpmpd_opp_svs_plus>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmpd_opp_nom>;
};
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
required-opps = <&rpmpd_opp_turbo>;
};
};
};
mdss_dsi0: dsi@5e94000 {
compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x05e94000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmpd SM6125_VDDCX>;
phys = <&mdss_dsi0_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
dsi_opp_table: opp-table {
compatible = "operating-points-v2";
opp-164000000 {
opp-hz = /bits/ 64 <164000000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmpd_opp_svs>;
};
};
};
mdss_dsi0_phy: phy@5e94400 {
compatible = "qcom,sm6125-dsi-phy-14nm";
reg = <0x05e94400 0x100>,
<0x05e94500 0x300>,
<0x05e94800 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface",
"ref";
required-opps = <&rpmpd_opp_nom>;
power-domains = <&rpmpd SM6125_VDDMX>;
status = "disabled";
};
};
dispcc: clock-controller@5f00000 {
compatible = "qcom,sm6125-dispcc";
reg = <0x05f00000 0x20000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>,
<0>,
<0>,
<0>,
<&gcc GCC_DISP_AHB_CLK>,
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk",
"cfg_ahb_clk",
"gcc_disp_gpll0_div_clk_src";
required-opps = <&rpmpd_opp_ret>;
power-domains = <&rpmpd SM6125_VDDCX>;
#clock-cells = <1>;
#power-domain-cells = <1>;
};
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0x0c600000 0x80000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#global-interrupts = <1>;
#iommu-cells = <2>;
};
apcs_glb: mailbox@f111000 {
compatible = "qcom,sm6125-apcs-hmss-global",
"qcom,msm8994-apcs-kpss-global";
reg = <0x0f111000 0x1000>;
#mbox-cells = <1>;
};
timer@f120000 {
compatible = "arm,armv7-timer-mem";
#address-cells = <1>;
#size-cells = <1>;
ranges;
reg = <0x0f120000 0x1000>;
clock-frequency = <19200000>;
frame@f121000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f121000 0x1000>,
<0x0f122000 0x1000>;
};
frame@f123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f123000 0x1000>;
status = "disabled";
};
frame@f124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f124000 0x1000>;
status = "disabled";
};
frame@f125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f125000 0x1000>;
status = "disabled";
};
frame@f126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f126000 0x1000>;
status = "disabled";
};
frame@f127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f127000 0x1000>;
status = "disabled";
};
frame@f128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x0f128000 0x1000>;
status = "disabled";
};
};
intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
reg = <0x0f200000 0x20000>,
<0x0f300000 0x100000>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 0xf08
GIC_PPI 2 0xf08
GIC_PPI 3 0xf08
GIC_PPI 0 0xf08>;
clock-frequency = <19200000>;
};
};