| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2017 Spreadtrum Communications Inc. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/sc27xx-pmic.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| #include <uapi/linux/usb/charger.h> |
| |
| #define SPRD_PMIC_INT_MASK_STATUS 0x0 |
| #define SPRD_PMIC_INT_RAW_STATUS 0x4 |
| #define SPRD_PMIC_INT_EN 0x8 |
| |
| #define SPRD_SC2730_IRQ_BASE 0x80 |
| #define SPRD_SC2730_IRQ_NUMS 10 |
| #define SPRD_SC2730_CHG_DET 0x1b9c |
| #define SPRD_SC2731_IRQ_BASE 0x140 |
| #define SPRD_SC2731_IRQ_NUMS 16 |
| #define SPRD_SC2731_CHG_DET 0xedc |
| |
| /* PMIC charger detection definition */ |
| #define SPRD_PMIC_CHG_DET_DELAY_US 200000 |
| #define SPRD_PMIC_CHG_DET_TIMEOUT 2000000 |
| #define SPRD_PMIC_CHG_DET_DONE BIT(11) |
| #define SPRD_PMIC_SDP_TYPE BIT(7) |
| #define SPRD_PMIC_DCP_TYPE BIT(6) |
| #define SPRD_PMIC_CDP_TYPE BIT(5) |
| #define SPRD_PMIC_CHG_TYPE_MASK GENMASK(7, 5) |
| |
| struct sprd_pmic { |
| struct regmap *regmap; |
| struct device *dev; |
| struct regmap_irq *irqs; |
| struct regmap_irq_chip irq_chip; |
| struct regmap_irq_chip_data *irq_data; |
| const struct sprd_pmic_data *pdata; |
| int irq; |
| }; |
| |
| struct sprd_pmic_data { |
| u32 irq_base; |
| u32 num_irqs; |
| u32 charger_det; |
| }; |
| |
| /* |
| * Since different PMICs of SC27xx series can have different interrupt |
| * base address and irq number, we should save irq number and irq base |
| * in the device data structure. |
| */ |
| static const struct sprd_pmic_data sc2730_data = { |
| .irq_base = SPRD_SC2730_IRQ_BASE, |
| .num_irqs = SPRD_SC2730_IRQ_NUMS, |
| .charger_det = SPRD_SC2730_CHG_DET, |
| }; |
| |
| static const struct sprd_pmic_data sc2731_data = { |
| .irq_base = SPRD_SC2731_IRQ_BASE, |
| .num_irqs = SPRD_SC2731_IRQ_NUMS, |
| .charger_det = SPRD_SC2731_CHG_DET, |
| }; |
| |
| enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct sprd_pmic *ddata = spi_get_drvdata(spi); |
| const struct sprd_pmic_data *pdata = ddata->pdata; |
| enum usb_charger_type type; |
| u32 val; |
| int ret; |
| |
| ret = regmap_read_poll_timeout(ddata->regmap, pdata->charger_det, val, |
| (val & SPRD_PMIC_CHG_DET_DONE), |
| SPRD_PMIC_CHG_DET_DELAY_US, |
| SPRD_PMIC_CHG_DET_TIMEOUT); |
| if (ret) { |
| dev_err(&spi->dev, "failed to detect charger type\n"); |
| return UNKNOWN_TYPE; |
| } |
| |
| switch (val & SPRD_PMIC_CHG_TYPE_MASK) { |
| case SPRD_PMIC_CDP_TYPE: |
| type = CDP_TYPE; |
| break; |
| case SPRD_PMIC_DCP_TYPE: |
| type = DCP_TYPE; |
| break; |
| case SPRD_PMIC_SDP_TYPE: |
| type = SDP_TYPE; |
| break; |
| default: |
| type = UNKNOWN_TYPE; |
| break; |
| } |
| |
| return type; |
| } |
| EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type); |
| |
| static int sprd_pmic_spi_write(void *context, const void *data, size_t count) |
| { |
| struct device *dev = context; |
| struct spi_device *spi = to_spi_device(dev); |
| |
| return spi_write(spi, data, count); |
| } |
| |
| static int sprd_pmic_spi_read(void *context, |
| const void *reg, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| struct device *dev = context; |
| struct spi_device *spi = to_spi_device(dev); |
| u32 rx_buf[2] = { 0 }; |
| int ret; |
| |
| /* Now we only support one PMIC register to read every time. */ |
| if (reg_size != sizeof(u32) || val_size != sizeof(u32)) |
| return -EINVAL; |
| |
| /* Copy address to read from into first element of SPI buffer. */ |
| memcpy(rx_buf, reg, sizeof(u32)); |
| ret = spi_read(spi, rx_buf, 1); |
| if (ret < 0) |
| return ret; |
| |
| memcpy(val, rx_buf, val_size); |
| return 0; |
| } |
| |
| static struct regmap_bus sprd_pmic_regmap = { |
| .write = sprd_pmic_spi_write, |
| .read = sprd_pmic_spi_read, |
| .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, |
| .val_format_endian_default = REGMAP_ENDIAN_NATIVE, |
| }; |
| |
| static const struct regmap_config sprd_pmic_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0xffff, |
| }; |
| |
| static int sprd_pmic_probe(struct spi_device *spi) |
| { |
| struct sprd_pmic *ddata; |
| const struct sprd_pmic_data *pdata; |
| int ret, i; |
| |
| pdata = of_device_get_match_data(&spi->dev); |
| if (!pdata) { |
| dev_err(&spi->dev, "No matching driver data found\n"); |
| return -EINVAL; |
| } |
| |
| ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); |
| if (!ddata) |
| return -ENOMEM; |
| |
| ddata->regmap = devm_regmap_init(&spi->dev, &sprd_pmic_regmap, |
| &spi->dev, &sprd_pmic_config); |
| if (IS_ERR(ddata->regmap)) { |
| ret = PTR_ERR(ddata->regmap); |
| dev_err(&spi->dev, "Failed to allocate register map %d\n", ret); |
| return ret; |
| } |
| |
| spi_set_drvdata(spi, ddata); |
| ddata->dev = &spi->dev; |
| ddata->irq = spi->irq; |
| ddata->pdata = pdata; |
| |
| ddata->irq_chip.name = dev_name(&spi->dev); |
| ddata->irq_chip.status_base = |
| pdata->irq_base + SPRD_PMIC_INT_MASK_STATUS; |
| ddata->irq_chip.unmask_base = pdata->irq_base + SPRD_PMIC_INT_EN; |
| ddata->irq_chip.ack_base = 0; |
| ddata->irq_chip.num_regs = 1; |
| ddata->irq_chip.num_irqs = pdata->num_irqs; |
| |
| ddata->irqs = devm_kcalloc(&spi->dev, |
| pdata->num_irqs, sizeof(struct regmap_irq), |
| GFP_KERNEL); |
| if (!ddata->irqs) |
| return -ENOMEM; |
| |
| ddata->irq_chip.irqs = ddata->irqs; |
| for (i = 0; i < pdata->num_irqs; i++) |
| ddata->irqs[i].mask = BIT(i); |
| |
| ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq, |
| IRQF_ONESHOT, 0, |
| &ddata->irq_chip, &ddata->irq_data); |
| if (ret) { |
| dev_err(&spi->dev, "Failed to add PMIC irq chip %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_of_platform_populate(&spi->dev); |
| if (ret) { |
| dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret); |
| return ret; |
| } |
| |
| device_init_wakeup(&spi->dev, true); |
| return 0; |
| } |
| |
| static int sprd_pmic_suspend(struct device *dev) |
| { |
| struct sprd_pmic *ddata = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(ddata->irq); |
| |
| return 0; |
| } |
| |
| static int sprd_pmic_resume(struct device *dev) |
| { |
| struct sprd_pmic *ddata = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(ddata->irq); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(sprd_pmic_pm_ops, |
| sprd_pmic_suspend, sprd_pmic_resume); |
| |
| static const struct of_device_id sprd_pmic_match[] = { |
| { .compatible = "sprd,sc2730", .data = &sc2730_data }, |
| { .compatible = "sprd,sc2731", .data = &sc2731_data }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, sprd_pmic_match); |
| |
| static const struct spi_device_id sprd_pmic_spi_ids[] = { |
| { .name = "sc2730", .driver_data = (unsigned long)&sc2730_data }, |
| { .name = "sc2731", .driver_data = (unsigned long)&sc2731_data }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(spi, sprd_pmic_spi_ids); |
| |
| static struct spi_driver sprd_pmic_driver = { |
| .driver = { |
| .name = "sc27xx-pmic", |
| .of_match_table = sprd_pmic_match, |
| .pm = pm_sleep_ptr(&sprd_pmic_pm_ops), |
| }, |
| .probe = sprd_pmic_probe, |
| .id_table = sprd_pmic_spi_ids, |
| }; |
| |
| static int __init sprd_pmic_init(void) |
| { |
| return spi_register_driver(&sprd_pmic_driver); |
| } |
| subsys_initcall(sprd_pmic_init); |
| |
| static void __exit sprd_pmic_exit(void) |
| { |
| spi_unregister_driver(&sprd_pmic_driver); |
| } |
| module_exit(sprd_pmic_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Spreadtrum SC27xx PMICs driver"); |
| MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>"); |