| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * S390 low-level entry points. |
| * |
| * Copyright IBM Corp. 1999, 2012 |
| * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), |
| * Hartmut Penner (hp@de.ibm.com), |
| * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <asm/asm-extable.h> |
| #include <asm/alternative-asm.h> |
| #include <asm/processor.h> |
| #include <asm/cache.h> |
| #include <asm/dwarf.h> |
| #include <asm/errno.h> |
| #include <asm/ptrace.h> |
| #include <asm/thread_info.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/unistd.h> |
| #include <asm/page.h> |
| #include <asm/sigp.h> |
| #include <asm/irq.h> |
| #include <asm/vx-insn.h> |
| #include <asm/setup.h> |
| #include <asm/nmi.h> |
| #include <asm/export.h> |
| #include <asm/nospec-insn.h> |
| |
| _LPP_OFFSET = __LC_LPP |
| |
| .macro STBEAR address |
| ALTERNATIVE "nop", ".insn s,0xb2010000,\address", 193 |
| .endm |
| |
| .macro LBEAR address |
| ALTERNATIVE "nop", ".insn s,0xb2000000,\address", 193 |
| .endm |
| |
| .macro LPSWEY address,lpswe |
| ALTERNATIVE "b \lpswe; nopr", ".insn siy,0xeb0000000071,\address,0", 193 |
| .endm |
| |
| .macro MBEAR reg |
| ALTERNATIVE "brcl 0,0", __stringify(mvc __PT_LAST_BREAK(8,\reg),__LC_LAST_BREAK), 193 |
| .endm |
| |
| .macro CHECK_STACK savearea |
| #ifdef CONFIG_CHECK_STACK |
| tml %r15,THREAD_SIZE - CONFIG_STACK_GUARD |
| lghi %r14,\savearea |
| jz stack_overflow |
| #endif |
| .endm |
| |
| .macro CHECK_VMAP_STACK savearea,oklabel |
| #ifdef CONFIG_VMAP_STACK |
| lgr %r14,%r15 |
| nill %r14,0x10000 - THREAD_SIZE |
| oill %r14,STACK_INIT_OFFSET |
| clg %r14,__LC_KERNEL_STACK |
| je \oklabel |
| clg %r14,__LC_ASYNC_STACK |
| je \oklabel |
| clg %r14,__LC_MCCK_STACK |
| je \oklabel |
| clg %r14,__LC_NODAT_STACK |
| je \oklabel |
| clg %r14,__LC_RESTART_STACK |
| je \oklabel |
| lghi %r14,\savearea |
| j stack_overflow |
| #else |
| j \oklabel |
| #endif |
| .endm |
| |
| /* |
| * The TSTMSK macro generates a test-under-mask instruction by |
| * calculating the memory offset for the specified mask value. |
| * Mask value can be any constant. The macro shifts the mask |
| * value to calculate the memory offset for the test-under-mask |
| * instruction. |
| */ |
| .macro TSTMSK addr, mask, size=8, bytepos=0 |
| .if (\bytepos < \size) && (\mask >> 8) |
| .if (\mask & 0xff) |
| .error "Mask exceeds byte boundary" |
| .endif |
| TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)" |
| .exitm |
| .endif |
| .ifeq \mask |
| .error "Mask must not be zero" |
| .endif |
| off = \size - \bytepos - 1 |
| tm off+\addr, \mask |
| .endm |
| |
| .macro BPOFF |
| ALTERNATIVE "nop", ".insn rrf,0xb2e80000,0,0,12,0", 82 |
| .endm |
| |
| .macro BPON |
| ALTERNATIVE "nop", ".insn rrf,0xb2e80000,0,0,13,0", 82 |
| .endm |
| |
| .macro BPENTER tif_ptr,tif_mask |
| ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .insn rrf,0xb2e80000,0,0,13,0", \ |
| "j .+12; nop; nop", 82 |
| .endm |
| |
| .macro BPEXIT tif_ptr,tif_mask |
| TSTMSK \tif_ptr,\tif_mask |
| ALTERNATIVE "jz .+8; .insn rrf,0xb2e80000,0,0,12,0", \ |
| "jnz .+8; .insn rrf,0xb2e80000,0,0,13,0", 82 |
| .endm |
| |
| #if IS_ENABLED(CONFIG_KVM) |
| /* |
| * The OUTSIDE macro jumps to the provided label in case the value |
| * in the provided register is outside of the provided range. The |
| * macro is useful for checking whether a PSW stored in a register |
| * pair points inside or outside of a block of instructions. |
| * @reg: register to check |
| * @start: start of the range |
| * @end: end of the range |
| * @outside_label: jump here if @reg is outside of [@start..@end) |
| */ |
| .macro OUTSIDE reg,start,end,outside_label |
| lgr %r14,\reg |
| larl %r13,\start |
| slgr %r14,%r13 |
| clgfrl %r14,.Lrange_size\@ |
| jhe \outside_label |
| .section .rodata, "a" |
| .align 4 |
| .Lrange_size\@: |
| .long \end - \start |
| .previous |
| .endm |
| |
| .macro SIEEXIT |
| lg %r9,__SF_SIE_CONTROL(%r15) # get control block pointer |
| ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE |
| lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce |
| larl %r9,sie_exit # skip forward to sie_exit |
| .endm |
| #endif |
| |
| .macro STACKLEAK_ERASE |
| #ifdef CONFIG_GCC_PLUGIN_STACKLEAK |
| brasl %r14,stackleak_erase_on_task_stack |
| #endif |
| .endm |
| |
| GEN_BR_THUNK %r14 |
| |
| .section .kprobes.text, "ax" |
| .Ldummy: |
| /* |
| * The following nop exists only in order to avoid that the next |
| * symbol starts at the beginning of the kprobes text section. |
| * In that case there would be several symbols at the same address. |
| * E.g. objdump would take an arbitrary symbol when disassembling |
| * the code. |
| * With the added nop in between this cannot happen. |
| */ |
| nop 0 |
| |
| /* |
| * Scheduler resume function, called by switch_to |
| * gpr2 = (task_struct *) prev |
| * gpr3 = (task_struct *) next |
| * Returns: |
| * gpr2 = prev |
| */ |
| SYM_FUNC_START(__switch_to) |
| stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task |
| lghi %r4,__TASK_stack |
| lghi %r1,__TASK_thread |
| llill %r5,STACK_INIT_OFFSET |
| stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev |
| lg %r15,0(%r4,%r3) # start of kernel stack of next |
| agr %r15,%r5 # end of kernel stack of next |
| stg %r3,__LC_CURRENT # store task struct of next |
| stg %r15,__LC_KERNEL_STACK # store end of kernel stack |
| lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next |
| aghi %r3,__TASK_pid |
| mvc __LC_CURRENT_PID(4,%r0),0(%r3) # store pid of next |
| lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task |
| ALTERNATIVE "nop", "lpp _LPP_OFFSET", 40 |
| BR_EX %r14 |
| SYM_FUNC_END(__switch_to) |
| |
| #if IS_ENABLED(CONFIG_KVM) |
| /* |
| * __sie64a calling convention: |
| * %r2 pointer to sie control block phys |
| * %r3 pointer to sie control block virt |
| * %r4 guest register save area |
| */ |
| SYM_FUNC_START(__sie64a) |
| stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers |
| lg %r12,__LC_CURRENT |
| stg %r2,__SF_SIE_CONTROL_PHYS(%r15) # save sie block physical.. |
| stg %r3,__SF_SIE_CONTROL(%r15) # ...and virtual addresses |
| stg %r4,__SF_SIE_SAVEAREA(%r15) # save guest register save area |
| xc __SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0 |
| mvc __SF_SIE_FLAGS(8,%r15),__TI_flags(%r12) # copy thread flags |
| lmg %r0,%r13,0(%r4) # load guest gprs 0-13 |
| lg %r14,__LC_GMAP # get gmap pointer |
| ltgr %r14,%r14 |
| jz .Lsie_gmap |
| lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce |
| .Lsie_gmap: |
| lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer |
| oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now |
| tm __SIE_PROG20+3(%r14),3 # last exit... |
| jnz .Lsie_skip |
| TSTMSK __LC_CPU_FLAGS,_CIF_FPU |
| jo .Lsie_skip # exit if fp/vx regs changed |
| lg %r14,__SF_SIE_CONTROL_PHYS(%r15) # get sie block phys addr |
| BPEXIT __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST |
| .Lsie_entry: |
| sie 0(%r14) |
| # Let the next instruction be NOP to avoid triggering a machine check |
| # and handling it in a guest as result of the instruction execution. |
| nopr 7 |
| .Lsie_leave: |
| BPOFF |
| BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST |
| .Lsie_skip: |
| lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer |
| ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE |
| lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce |
| .Lsie_done: |
| # some program checks are suppressing. C code (e.g. do_protection_exception) |
| # will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There |
| # are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable. |
| # Other instructions between __sie64a and .Lsie_done should not cause program |
| # interrupts. So lets use 3 nops as a landing pad for all possible rewinds. |
| .Lrewind_pad6: |
| nopr 7 |
| .Lrewind_pad4: |
| nopr 7 |
| .Lrewind_pad2: |
| nopr 7 |
| SYM_INNER_LABEL(sie_exit, SYM_L_GLOBAL) |
| lg %r14,__SF_SIE_SAVEAREA(%r15) # load guest register save area |
| stmg %r0,%r13,0(%r14) # save guest gprs 0-13 |
| xgr %r0,%r0 # clear guest registers to |
| xgr %r1,%r1 # prevent speculative use |
| xgr %r3,%r3 |
| xgr %r4,%r4 |
| xgr %r5,%r5 |
| lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers |
| lg %r2,__SF_SIE_REASON(%r15) # return exit reason code |
| BR_EX %r14 |
| .Lsie_fault: |
| lghi %r14,-EFAULT |
| stg %r14,__SF_SIE_REASON(%r15) # set exit reason code |
| j sie_exit |
| |
| EX_TABLE(.Lrewind_pad6,.Lsie_fault) |
| EX_TABLE(.Lrewind_pad4,.Lsie_fault) |
| EX_TABLE(.Lrewind_pad2,.Lsie_fault) |
| EX_TABLE(sie_exit,.Lsie_fault) |
| SYM_FUNC_END(__sie64a) |
| EXPORT_SYMBOL(__sie64a) |
| EXPORT_SYMBOL(sie_exit) |
| #endif |
| |
| /* |
| * SVC interrupt handler routine. System calls are synchronous events and |
| * are entered with interrupts disabled. |
| */ |
| |
| SYM_CODE_START(system_call) |
| stpt __LC_SYS_ENTER_TIMER |
| stmg %r8,%r15,__LC_SAVE_AREA_SYNC |
| BPOFF |
| lghi %r14,0 |
| .Lsysc_per: |
| STBEAR __LC_LAST_BREAK |
| lctlg %c1,%c1,__LC_KERNEL_ASCE |
| lg %r15,__LC_KERNEL_STACK |
| xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) |
| stmg %r0,%r7,STACK_FRAME_OVERHEAD+__PT_R0(%r15) |
| # clear user controlled register to prevent speculative use |
| xgr %r0,%r0 |
| xgr %r1,%r1 |
| xgr %r4,%r4 |
| xgr %r5,%r5 |
| xgr %r6,%r6 |
| xgr %r7,%r7 |
| xgr %r8,%r8 |
| xgr %r9,%r9 |
| xgr %r10,%r10 |
| xgr %r11,%r11 |
| la %r2,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs |
| mvc __PT_R8(64,%r2),__LC_SAVE_AREA_SYNC |
| MBEAR %r2 |
| lgr %r3,%r14 |
| brasl %r14,__do_syscall |
| STACKLEAK_ERASE |
| lctlg %c1,%c1,__LC_USER_ASCE |
| mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15) |
| BPON |
| LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15) |
| lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15) |
| stpt __LC_EXIT_TIMER |
| LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE |
| SYM_CODE_END(system_call) |
| |
| # |
| # a new process exits the kernel with ret_from_fork |
| # |
| SYM_CODE_START(ret_from_fork) |
| lgr %r3,%r11 |
| brasl %r14,__ret_from_fork |
| STACKLEAK_ERASE |
| lctlg %c1,%c1,__LC_USER_ASCE |
| mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15) |
| BPON |
| LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15) |
| lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15) |
| stpt __LC_EXIT_TIMER |
| LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE |
| SYM_CODE_END(ret_from_fork) |
| |
| /* |
| * Program check handler routine |
| */ |
| |
| SYM_CODE_START(pgm_check_handler) |
| stpt __LC_SYS_ENTER_TIMER |
| BPOFF |
| stmg %r8,%r15,__LC_SAVE_AREA_SYNC |
| lghi %r10,0 |
| lmg %r8,%r9,__LC_PGM_OLD_PSW |
| tmhh %r8,0x0001 # coming from user space? |
| jno .Lpgm_skip_asce |
| lctlg %c1,%c1,__LC_KERNEL_ASCE |
| j 3f # -> fault in user space |
| .Lpgm_skip_asce: |
| #if IS_ENABLED(CONFIG_KVM) |
| # cleanup critical section for program checks in __sie64a |
| OUTSIDE %r9,.Lsie_gmap,.Lsie_done,1f |
| BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST |
| SIEEXIT |
| lghi %r10,_PIF_GUEST_FAULT |
| #endif |
| 1: tmhh %r8,0x4000 # PER bit set in old PSW ? |
| jnz 2f # -> enabled, can't be a double fault |
| tm __LC_PGM_ILC+3,0x80 # check for per exception |
| jnz .Lpgm_svcper # -> single stepped svc |
| 2: CHECK_STACK __LC_SAVE_AREA_SYNC |
| aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) |
| # CHECK_VMAP_STACK branches to stack_overflow or 4f |
| CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,4f |
| 3: lg %r15,__LC_KERNEL_STACK |
| 4: la %r11,STACK_FRAME_OVERHEAD(%r15) |
| stg %r10,__PT_FLAGS(%r11) |
| xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) |
| stmg %r0,%r7,__PT_R0(%r11) |
| mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC |
| mvc __PT_LAST_BREAK(8,%r11),__LC_PGM_LAST_BREAK |
| stmg %r8,%r9,__PT_PSW(%r11) |
| |
| # clear user controlled registers to prevent speculative use |
| xgr %r0,%r0 |
| xgr %r1,%r1 |
| xgr %r3,%r3 |
| xgr %r4,%r4 |
| xgr %r5,%r5 |
| xgr %r6,%r6 |
| xgr %r7,%r7 |
| lgr %r2,%r11 |
| brasl %r14,__do_pgm_check |
| tmhh %r8,0x0001 # returning to user space? |
| jno .Lpgm_exit_kernel |
| STACKLEAK_ERASE |
| lctlg %c1,%c1,__LC_USER_ASCE |
| BPON |
| stpt __LC_EXIT_TIMER |
| .Lpgm_exit_kernel: |
| mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15) |
| LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15) |
| lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15) |
| LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE |
| |
| # |
| # single stepped system call |
| # |
| .Lpgm_svcper: |
| mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW |
| larl %r14,.Lsysc_per |
| stg %r14,__LC_RETURN_PSW+8 |
| lghi %r14,1 |
| LBEAR __LC_PGM_LAST_BREAK |
| LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE # branch to .Lsysc_per |
| SYM_CODE_END(pgm_check_handler) |
| |
| /* |
| * Interrupt handler macro used for external and IO interrupts. |
| */ |
| .macro INT_HANDLER name,lc_old_psw,handler |
| SYM_CODE_START(\name) |
| stckf __LC_INT_CLOCK |
| stpt __LC_SYS_ENTER_TIMER |
| STBEAR __LC_LAST_BREAK |
| BPOFF |
| stmg %r8,%r15,__LC_SAVE_AREA_ASYNC |
| lmg %r8,%r9,\lc_old_psw |
| tmhh %r8,0x0001 # interrupting from user ? |
| jnz 1f |
| #if IS_ENABLED(CONFIG_KVM) |
| OUTSIDE %r9,.Lsie_gmap,.Lsie_done,0f |
| BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST |
| SIEEXIT |
| #endif |
| 0: CHECK_STACK __LC_SAVE_AREA_ASYNC |
| aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) |
| j 2f |
| 1: lctlg %c1,%c1,__LC_KERNEL_ASCE |
| lg %r15,__LC_KERNEL_STACK |
| 2: xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) |
| la %r11,STACK_FRAME_OVERHEAD(%r15) |
| stmg %r0,%r7,__PT_R0(%r11) |
| # clear user controlled registers to prevent speculative use |
| xgr %r0,%r0 |
| xgr %r1,%r1 |
| xgr %r3,%r3 |
| xgr %r4,%r4 |
| xgr %r5,%r5 |
| xgr %r6,%r6 |
| xgr %r7,%r7 |
| xgr %r10,%r10 |
| xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) |
| mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC |
| MBEAR %r11 |
| stmg %r8,%r9,__PT_PSW(%r11) |
| lgr %r2,%r11 # pass pointer to pt_regs |
| brasl %r14,\handler |
| mvc __LC_RETURN_PSW(16),__PT_PSW(%r11) |
| tmhh %r8,0x0001 # returning to user ? |
| jno 2f |
| STACKLEAK_ERASE |
| lctlg %c1,%c1,__LC_USER_ASCE |
| BPON |
| stpt __LC_EXIT_TIMER |
| 2: LBEAR __PT_LAST_BREAK(%r11) |
| lmg %r0,%r15,__PT_R0(%r11) |
| LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE |
| SYM_CODE_END(\name) |
| .endm |
| |
| INT_HANDLER ext_int_handler,__LC_EXT_OLD_PSW,do_ext_irq |
| INT_HANDLER io_int_handler,__LC_IO_OLD_PSW,do_io_irq |
| |
| /* |
| * Load idle PSW. |
| */ |
| SYM_FUNC_START(psw_idle) |
| stg %r14,(__SF_GPRS+8*8)(%r15) |
| stg %r3,__SF_EMPTY(%r15) |
| larl %r1,psw_idle_exit |
| stg %r1,__SF_EMPTY+8(%r15) |
| larl %r1,smp_cpu_mtid |
| llgf %r1,0(%r1) |
| ltgr %r1,%r1 |
| jz .Lpsw_idle_stcctm |
| .insn rsy,0xeb0000000017,%r1,5,__MT_CYCLES_ENTER(%r2) |
| .Lpsw_idle_stcctm: |
| oi __LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT |
| BPON |
| stckf __CLOCK_IDLE_ENTER(%r2) |
| stpt __TIMER_IDLE_ENTER(%r2) |
| lpswe __SF_EMPTY(%r15) |
| SYM_INNER_LABEL(psw_idle_exit, SYM_L_GLOBAL) |
| BR_EX %r14 |
| SYM_FUNC_END(psw_idle) |
| |
| /* |
| * Machine check handler routines |
| */ |
| SYM_CODE_START(mcck_int_handler) |
| stckf __LC_MCCK_CLOCK |
| BPOFF |
| la %r1,4095 # validate r1 |
| spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # validate cpu timer |
| LBEAR __LC_LAST_BREAK_SAVE_AREA-4095(%r1) # validate bear |
| lmg %r0,%r15,__LC_GPREGS_SAVE_AREA # validate gprs |
| lmg %r8,%r9,__LC_MCK_OLD_PSW |
| TSTMSK __LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE |
| jo .Lmcck_panic # yes -> rest of mcck code invalid |
| TSTMSK __LC_MCCK_CODE,MCCK_CODE_CR_VALID |
| jno .Lmcck_panic # control registers invalid -> panic |
| lctlg %c0,%c15,__LC_CREGS_SAVE_AREA # validate ctl regs |
| ptlb |
| lghi %r14,__LC_CPU_TIMER_SAVE_AREA |
| mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) |
| TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID |
| jo 3f |
| la %r14,__LC_SYS_ENTER_TIMER |
| clc 0(8,%r14),__LC_EXIT_TIMER |
| jl 1f |
| la %r14,__LC_EXIT_TIMER |
| 1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER |
| jl 2f |
| la %r14,__LC_LAST_UPDATE_TIMER |
| 2: spt 0(%r14) |
| mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) |
| 3: TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID |
| jno .Lmcck_panic |
| tmhh %r8,0x0001 # interrupting from user ? |
| jnz .Lmcck_user |
| TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID |
| jno .Lmcck_panic |
| #if IS_ENABLED(CONFIG_KVM) |
| OUTSIDE %r9,.Lsie_gmap,.Lsie_done,.Lmcck_user |
| OUTSIDE %r9,.Lsie_entry,.Lsie_leave,4f |
| oi __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST |
| 4: BPENTER __SF_SIE_FLAGS(%r15),_TIF_ISOLATE_BP_GUEST |
| SIEEXIT |
| #endif |
| .Lmcck_user: |
| lg %r15,__LC_MCCK_STACK |
| la %r11,STACK_FRAME_OVERHEAD(%r15) |
| stctg %c1,%c1,__PT_CR1(%r11) |
| lctlg %c1,%c1,__LC_KERNEL_ASCE |
| xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) |
| lghi %r14,__LC_GPREGS_SAVE_AREA+64 |
| stmg %r0,%r7,__PT_R0(%r11) |
| # clear user controlled registers to prevent speculative use |
| xgr %r0,%r0 |
| xgr %r1,%r1 |
| xgr %r3,%r3 |
| xgr %r4,%r4 |
| xgr %r5,%r5 |
| xgr %r6,%r6 |
| xgr %r7,%r7 |
| xgr %r10,%r10 |
| mvc __PT_R8(64,%r11),0(%r14) |
| stmg %r8,%r9,__PT_PSW(%r11) |
| xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) |
| xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) |
| lgr %r2,%r11 # pass pointer to pt_regs |
| brasl %r14,s390_do_machine_check |
| lctlg %c1,%c1,__PT_CR1(%r11) |
| lmg %r0,%r10,__PT_R0(%r11) |
| mvc __LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW |
| tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ? |
| jno 0f |
| BPON |
| stpt __LC_EXIT_TIMER |
| 0: ALTERNATIVE "nop", __stringify(lghi %r12,__LC_LAST_BREAK_SAVE_AREA),193 |
| LBEAR 0(%r12) |
| lmg %r11,%r15,__PT_R11(%r11) |
| LPSWEY __LC_RETURN_MCCK_PSW,__LC_RETURN_MCCK_LPSWE |
| |
| .Lmcck_panic: |
| /* |
| * Iterate over all possible CPU addresses in the range 0..0xffff |
| * and stop each CPU using signal processor. Use compare and swap |
| * to allow just one CPU-stopper and prevent concurrent CPUs from |
| * stopping each other while leaving the others running. |
| */ |
| lhi %r5,0 |
| lhi %r6,1 |
| larl %r7,stop_lock |
| cs %r5,%r6,0(%r7) # single CPU-stopper only |
| jnz 4f |
| larl %r7,this_cpu |
| stap 0(%r7) # this CPU address |
| lh %r4,0(%r7) |
| nilh %r4,0 |
| lhi %r0,1 |
| sll %r0,16 # CPU counter |
| lhi %r3,0 # next CPU address |
| 0: cr %r3,%r4 |
| je 2f |
| 1: sigp %r1,%r3,SIGP_STOP # stop next CPU |
| brc SIGP_CC_BUSY,1b |
| 2: ahi %r3,1 |
| brct %r0,0b |
| 3: sigp %r1,%r4,SIGP_STOP # stop this CPU |
| brc SIGP_CC_BUSY,3b |
| 4: j 4b |
| SYM_CODE_END(mcck_int_handler) |
| |
| SYM_CODE_START(restart_int_handler) |
| ALTERNATIVE "nop", "lpp _LPP_OFFSET", 40 |
| stg %r15,__LC_SAVE_AREA_RESTART |
| TSTMSK __LC_RESTART_FLAGS,RESTART_FLAG_CTLREGS,4 |
| jz 0f |
| lctlg %c0,%c15,__LC_CREGS_SAVE_AREA |
| 0: larl %r15,stosm_tmp |
| stosm 0(%r15),0x04 # turn dat on, keep irqs off |
| lg %r15,__LC_RESTART_STACK |
| xc STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15) |
| stmg %r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15) |
| mvc STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART |
| mvc STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW |
| xc 0(STACK_FRAME_OVERHEAD,%r15),0(%r15) |
| lg %r1,__LC_RESTART_FN # load fn, parm & source cpu |
| lg %r2,__LC_RESTART_DATA |
| lgf %r3,__LC_RESTART_SOURCE |
| ltgr %r3,%r3 # test source cpu address |
| jm 1f # negative -> skip source stop |
| 0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu |
| brc 10,0b # wait for status stored |
| 1: basr %r14,%r1 # call function |
| stap __SF_EMPTY(%r15) # store cpu address |
| llgh %r3,__SF_EMPTY(%r15) |
| 2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu |
| brc 2,2b |
| 3: j 3b |
| SYM_CODE_END(restart_int_handler) |
| |
| .section .kprobes.text, "ax" |
| |
| #if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK) |
| /* |
| * The synchronous or the asynchronous stack overflowed. We are dead. |
| * No need to properly save the registers, we are going to panic anyway. |
| * Setup a pt_regs so that show_trace can provide a good call trace. |
| */ |
| SYM_CODE_START(stack_overflow) |
| lg %r15,__LC_NODAT_STACK # change to panic stack |
| la %r11,STACK_FRAME_OVERHEAD(%r15) |
| stmg %r0,%r7,__PT_R0(%r11) |
| stmg %r8,%r9,__PT_PSW(%r11) |
| mvc __PT_R8(64,%r11),0(%r14) |
| stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2 |
| xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) |
| lgr %r2,%r11 # pass pointer to pt_regs |
| jg kernel_stack_overflow |
| SYM_CODE_END(stack_overflow) |
| #endif |
| |
| .section .data, "aw" |
| .balign 4 |
| SYM_DATA_LOCAL(stop_lock, .long 0) |
| SYM_DATA_LOCAL(this_cpu, .short 0) |
| SYM_DATA_LOCAL(stosm_tmp, .byte 0) |
| |
| .section .rodata, "a" |
| #define SYSCALL(esame,emu) .quad __s390x_ ## esame |
| SYM_DATA_START(sys_call_table) |
| #include "asm/syscall_table.h" |
| SYM_DATA_END(sys_call_table) |
| #undef SYSCALL |
| |
| #ifdef CONFIG_COMPAT |
| |
| #define SYSCALL(esame,emu) .quad __s390_ ## emu |
| SYM_DATA_START(sys_call_table_emu) |
| #include "asm/syscall_table.h" |
| SYM_DATA_END(sys_call_table_emu) |
| #undef SYSCALL |
| #endif |
