| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // Regulator controller driver for UniPhier SoC |
| // Copyright 2018 Socionext Inc. |
| // Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/reset.h> |
| |
| #define MAX_CLKS 2 |
| #define MAX_RSTS 2 |
| |
| struct uniphier_regulator_soc_data { |
| int nclks; |
| const char * const *clock_names; |
| int nrsts; |
| const char * const *reset_names; |
| const struct regulator_desc *desc; |
| const struct regmap_config *regconf; |
| }; |
| |
| struct uniphier_regulator_priv { |
| struct clk_bulk_data clk[MAX_CLKS]; |
| struct reset_control *rst[MAX_RSTS]; |
| const struct uniphier_regulator_soc_data *data; |
| }; |
| |
| static const struct regulator_ops uniphier_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static int uniphier_regulator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct uniphier_regulator_priv *priv; |
| struct regulator_config config = { }; |
| struct regulator_dev *rdev; |
| struct regmap *regmap; |
| void __iomem *base; |
| const char *name; |
| int i, ret, nr; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->data = of_device_get_match_data(dev); |
| if (WARN_ON(!priv->data)) |
| return -EINVAL; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| for (i = 0; i < priv->data->nclks; i++) |
| priv->clk[i].id = priv->data->clock_names[i]; |
| ret = devm_clk_bulk_get(dev, priv->data->nclks, priv->clk); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < priv->data->nrsts; i++) { |
| name = priv->data->reset_names[i]; |
| priv->rst[i] = devm_reset_control_get_shared(dev, name); |
| if (IS_ERR(priv->rst[i])) |
| return PTR_ERR(priv->rst[i]); |
| } |
| |
| ret = clk_bulk_prepare_enable(priv->data->nclks, priv->clk); |
| if (ret) |
| return ret; |
| |
| for (nr = 0; nr < priv->data->nrsts; nr++) { |
| ret = reset_control_deassert(priv->rst[nr]); |
| if (ret) |
| goto out_rst_assert; |
| } |
| |
| regmap = devm_regmap_init_mmio(dev, base, priv->data->regconf); |
| if (IS_ERR(regmap)) { |
| ret = PTR_ERR(regmap); |
| goto out_rst_assert; |
| } |
| |
| config.dev = dev; |
| config.driver_data = priv; |
| config.of_node = dev->of_node; |
| config.regmap = regmap; |
| config.init_data = of_get_regulator_init_data(dev, dev->of_node, |
| priv->data->desc); |
| rdev = devm_regulator_register(dev, priv->data->desc, &config); |
| if (IS_ERR(rdev)) { |
| ret = PTR_ERR(rdev); |
| goto out_rst_assert; |
| } |
| |
| platform_set_drvdata(pdev, priv); |
| |
| return 0; |
| |
| out_rst_assert: |
| while (nr--) |
| reset_control_assert(priv->rst[nr]); |
| |
| clk_bulk_disable_unprepare(priv->data->nclks, priv->clk); |
| |
| return ret; |
| } |
| |
| static int uniphier_regulator_remove(struct platform_device *pdev) |
| { |
| struct uniphier_regulator_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < priv->data->nrsts; i++) |
| reset_control_assert(priv->rst[i]); |
| |
| clk_bulk_disable_unprepare(priv->data->nclks, priv->clk); |
| |
| return 0; |
| } |
| |
| /* USB3 controller data */ |
| #define USB3VBUS_OFFSET 0x0 |
| #define USB3VBUS_REG BIT(4) |
| #define USB3VBUS_REG_EN BIT(3) |
| static const struct regulator_desc uniphier_usb3_regulator_desc = { |
| .name = "vbus", |
| .of_match = of_match_ptr("vbus"), |
| .ops = &uniphier_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .owner = THIS_MODULE, |
| .enable_reg = USB3VBUS_OFFSET, |
| .enable_mask = USB3VBUS_REG_EN | USB3VBUS_REG, |
| .enable_val = USB3VBUS_REG_EN | USB3VBUS_REG, |
| .disable_val = USB3VBUS_REG_EN, |
| }; |
| |
| static const struct regmap_config uniphier_usb3_regulator_regconf = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 1, |
| }; |
| |
| static const char * const uniphier_pro4_clock_reset_names[] = { |
| "gio", "link", |
| }; |
| |
| static const struct uniphier_regulator_soc_data uniphier_pro4_usb3_data = { |
| .nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names), |
| .clock_names = uniphier_pro4_clock_reset_names, |
| .nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names), |
| .reset_names = uniphier_pro4_clock_reset_names, |
| .desc = &uniphier_usb3_regulator_desc, |
| .regconf = &uniphier_usb3_regulator_regconf, |
| }; |
| |
| static const char * const uniphier_pxs2_clock_reset_names[] = { |
| "link", |
| }; |
| |
| static const struct uniphier_regulator_soc_data uniphier_pxs2_usb3_data = { |
| .nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), |
| .clock_names = uniphier_pxs2_clock_reset_names, |
| .nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), |
| .reset_names = uniphier_pxs2_clock_reset_names, |
| .desc = &uniphier_usb3_regulator_desc, |
| .regconf = &uniphier_usb3_regulator_regconf, |
| }; |
| |
| static const struct of_device_id uniphier_regulator_match[] = { |
| /* USB VBUS */ |
| { |
| .compatible = "socionext,uniphier-pro4-usb3-regulator", |
| .data = &uniphier_pro4_usb3_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pro5-usb3-regulator", |
| .data = &uniphier_pro4_usb3_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs2-usb3-regulator", |
| .data = &uniphier_pxs2_usb3_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-ld20-usb3-regulator", |
| .data = &uniphier_pxs2_usb3_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-pxs3-usb3-regulator", |
| .data = &uniphier_pxs2_usb3_data, |
| }, |
| { |
| .compatible = "socionext,uniphier-nx1-usb3-regulator", |
| .data = &uniphier_pxs2_usb3_data, |
| }, |
| { /* Sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, uniphier_regulator_match); |
| |
| static struct platform_driver uniphier_regulator_driver = { |
| .probe = uniphier_regulator_probe, |
| .remove = uniphier_regulator_remove, |
| .driver = { |
| .name = "uniphier-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = uniphier_regulator_match, |
| }, |
| }; |
| module_platform_driver(uniphier_regulator_driver); |
| |
| MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); |
| MODULE_DESCRIPTION("UniPhier Regulator Controller Driver"); |
| MODULE_LICENSE("GPL"); |