| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Fast Userspace Mutexes (which I call "Futexes!"). |
| * (C) Rusty Russell, IBM 2002 |
| * |
| * Generalized futexes, futex requeueing, misc fixes by Ingo Molnar |
| * (C) Copyright 2003 Red Hat Inc, All Rights Reserved |
| * |
| * Removed page pinning, fix privately mapped COW pages and other cleanups |
| * (C) Copyright 2003, 2004 Jamie Lokier |
| * |
| * Robust futex support started by Ingo Molnar |
| * (C) Copyright 2006 Red Hat Inc, All Rights Reserved |
| * Thanks to Thomas Gleixner for suggestions, analysis and fixes. |
| * |
| * PI-futex support started by Ingo Molnar and Thomas Gleixner |
| * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> |
| * Copyright (C) 2006 Timesys Corp., Thomas Gleixner <tglx@timesys.com> |
| * |
| * PRIVATE futexes by Eric Dumazet |
| * Copyright (C) 2007 Eric Dumazet <dada1@cosmosbay.com> |
| * |
| * Requeue-PI support by Darren Hart <dvhltc@us.ibm.com> |
| * Copyright (C) IBM Corporation, 2009 |
| * Thanks to Thomas Gleixner for conceptual design and careful reviews. |
| * |
| * Thanks to Ben LaHaise for yelling "hashed waitqueues" loudly |
| * enough at me, Linus for the original (flawed) idea, Matthew |
| * Kirkwood for proof-of-concept implementation. |
| * |
| * "The futexes are also cursed." |
| * "But they come in a choice of three flavours!" |
| */ |
| #include <linux/compat.h> |
| #include <linux/jhash.h> |
| #include <linux/pagemap.h> |
| #include <linux/memblock.h> |
| #include <linux/fault-inject.h> |
| #include <linux/slab.h> |
| |
| #include "futex.h" |
| #include "../locking/rtmutex_common.h" |
| |
| /* |
| * The base of the bucket array and its size are always used together |
| * (after initialization only in futex_hash()), so ensure that they |
| * reside in the same cacheline. |
| */ |
| static struct { |
| struct futex_hash_bucket *queues; |
| unsigned long hashsize; |
| } __futex_data __read_mostly __aligned(2*sizeof(long)); |
| #define futex_queues (__futex_data.queues) |
| #define futex_hashsize (__futex_data.hashsize) |
| |
| |
| /* |
| * Fault injections for futexes. |
| */ |
| #ifdef CONFIG_FAIL_FUTEX |
| |
| static struct { |
| struct fault_attr attr; |
| |
| bool ignore_private; |
| } fail_futex = { |
| .attr = FAULT_ATTR_INITIALIZER, |
| .ignore_private = false, |
| }; |
| |
| static int __init setup_fail_futex(char *str) |
| { |
| return setup_fault_attr(&fail_futex.attr, str); |
| } |
| __setup("fail_futex=", setup_fail_futex); |
| |
| bool should_fail_futex(bool fshared) |
| { |
| if (fail_futex.ignore_private && !fshared) |
| return false; |
| |
| return should_fail(&fail_futex.attr, 1); |
| } |
| |
| #ifdef CONFIG_FAULT_INJECTION_DEBUG_FS |
| |
| static int __init fail_futex_debugfs(void) |
| { |
| umode_t mode = S_IFREG | S_IRUSR | S_IWUSR; |
| struct dentry *dir; |
| |
| dir = fault_create_debugfs_attr("fail_futex", NULL, |
| &fail_futex.attr); |
| if (IS_ERR(dir)) |
| return PTR_ERR(dir); |
| |
| debugfs_create_bool("ignore-private", mode, dir, |
| &fail_futex.ignore_private); |
| return 0; |
| } |
| |
| late_initcall(fail_futex_debugfs); |
| |
| #endif /* CONFIG_FAULT_INJECTION_DEBUG_FS */ |
| |
| #endif /* CONFIG_FAIL_FUTEX */ |
| |
| /** |
| * futex_hash - Return the hash bucket in the global hash |
| * @key: Pointer to the futex key for which the hash is calculated |
| * |
| * We hash on the keys returned from get_futex_key (see below) and return the |
| * corresponding hash bucket in the global hash. |
| */ |
| struct futex_hash_bucket *futex_hash(union futex_key *key) |
| { |
| u32 hash = jhash2((u32 *)key, offsetof(typeof(*key), both.offset) / 4, |
| key->both.offset); |
| |
| return &futex_queues[hash & (futex_hashsize - 1)]; |
| } |
| |
| |
| /** |
| * futex_setup_timer - set up the sleeping hrtimer. |
| * @time: ptr to the given timeout value |
| * @timeout: the hrtimer_sleeper structure to be set up |
| * @flags: futex flags |
| * @range_ns: optional range in ns |
| * |
| * Return: Initialized hrtimer_sleeper structure or NULL if no timeout |
| * value given |
| */ |
| struct hrtimer_sleeper * |
| futex_setup_timer(ktime_t *time, struct hrtimer_sleeper *timeout, |
| int flags, u64 range_ns) |
| { |
| if (!time) |
| return NULL; |
| |
| hrtimer_init_sleeper_on_stack(timeout, (flags & FLAGS_CLOCKRT) ? |
| CLOCK_REALTIME : CLOCK_MONOTONIC, |
| HRTIMER_MODE_ABS); |
| /* |
| * If range_ns is 0, calling hrtimer_set_expires_range_ns() is |
| * effectively the same as calling hrtimer_set_expires(). |
| */ |
| hrtimer_set_expires_range_ns(&timeout->timer, *time, range_ns); |
| |
| return timeout; |
| } |
| |
| /* |
| * Generate a machine wide unique identifier for this inode. |
| * |
| * This relies on u64 not wrapping in the life-time of the machine; which with |
| * 1ns resolution means almost 585 years. |
| * |
| * This further relies on the fact that a well formed program will not unmap |
| * the file while it has a (shared) futex waiting on it. This mapping will have |
| * a file reference which pins the mount and inode. |
| * |
| * If for some reason an inode gets evicted and read back in again, it will get |
| * a new sequence number and will _NOT_ match, even though it is the exact same |
| * file. |
| * |
| * It is important that futex_match() will never have a false-positive, esp. |
| * for PI futexes that can mess up the state. The above argues that false-negatives |
| * are only possible for malformed programs. |
| */ |
| static u64 get_inode_sequence_number(struct inode *inode) |
| { |
| static atomic64_t i_seq; |
| u64 old; |
| |
| /* Does the inode already have a sequence number? */ |
| old = atomic64_read(&inode->i_sequence); |
| if (likely(old)) |
| return old; |
| |
| for (;;) { |
| u64 new = atomic64_add_return(1, &i_seq); |
| if (WARN_ON_ONCE(!new)) |
| continue; |
| |
| old = atomic64_cmpxchg_relaxed(&inode->i_sequence, 0, new); |
| if (old) |
| return old; |
| return new; |
| } |
| } |
| |
| /** |
| * get_futex_key() - Get parameters which are the keys for a futex |
| * @uaddr: virtual address of the futex |
| * @fshared: false for a PROCESS_PRIVATE futex, true for PROCESS_SHARED |
| * @key: address where result is stored. |
| * @rw: mapping needs to be read/write (values: FUTEX_READ, |
| * FUTEX_WRITE) |
| * |
| * Return: a negative error code or 0 |
| * |
| * The key words are stored in @key on success. |
| * |
| * For shared mappings (when @fshared), the key is: |
| * |
| * ( inode->i_sequence, page->index, offset_within_page ) |
| * |
| * [ also see get_inode_sequence_number() ] |
| * |
| * For private mappings (or when !@fshared), the key is: |
| * |
| * ( current->mm, address, 0 ) |
| * |
| * This allows (cross process, where applicable) identification of the futex |
| * without keeping the page pinned for the duration of the FUTEX_WAIT. |
| * |
| * lock_page() might sleep, the caller should not hold a spinlock. |
| */ |
| int get_futex_key(u32 __user *uaddr, bool fshared, union futex_key *key, |
| enum futex_access rw) |
| { |
| unsigned long address = (unsigned long)uaddr; |
| struct mm_struct *mm = current->mm; |
| struct page *page, *tail; |
| struct address_space *mapping; |
| int err, ro = 0; |
| |
| /* |
| * The futex address must be "naturally" aligned. |
| */ |
| key->both.offset = address % PAGE_SIZE; |
| if (unlikely((address % sizeof(u32)) != 0)) |
| return -EINVAL; |
| address -= key->both.offset; |
| |
| if (unlikely(!access_ok(uaddr, sizeof(u32)))) |
| return -EFAULT; |
| |
| if (unlikely(should_fail_futex(fshared))) |
| return -EFAULT; |
| |
| /* |
| * PROCESS_PRIVATE futexes are fast. |
| * As the mm cannot disappear under us and the 'key' only needs |
| * virtual address, we dont even have to find the underlying vma. |
| * Note : We do have to check 'uaddr' is a valid user address, |
| * but access_ok() should be faster than find_vma() |
| */ |
| if (!fshared) { |
| key->private.mm = mm; |
| key->private.address = address; |
| return 0; |
| } |
| |
| again: |
| /* Ignore any VERIFY_READ mapping (futex common case) */ |
| if (unlikely(should_fail_futex(true))) |
| return -EFAULT; |
| |
| err = get_user_pages_fast(address, 1, FOLL_WRITE, &page); |
| /* |
| * If write access is not required (eg. FUTEX_WAIT), try |
| * and get read-only access. |
| */ |
| if (err == -EFAULT && rw == FUTEX_READ) { |
| err = get_user_pages_fast(address, 1, 0, &page); |
| ro = 1; |
| } |
| if (err < 0) |
| return err; |
| else |
| err = 0; |
| |
| /* |
| * The treatment of mapping from this point on is critical. The page |
| * lock protects many things but in this context the page lock |
| * stabilizes mapping, prevents inode freeing in the shared |
| * file-backed region case and guards against movement to swap cache. |
| * |
| * Strictly speaking the page lock is not needed in all cases being |
| * considered here and page lock forces unnecessarily serialization |
| * From this point on, mapping will be re-verified if necessary and |
| * page lock will be acquired only if it is unavoidable |
| * |
| * Mapping checks require the head page for any compound page so the |
| * head page and mapping is looked up now. For anonymous pages, it |
| * does not matter if the page splits in the future as the key is |
| * based on the address. For filesystem-backed pages, the tail is |
| * required as the index of the page determines the key. For |
| * base pages, there is no tail page and tail == page. |
| */ |
| tail = page; |
| page = compound_head(page); |
| mapping = READ_ONCE(page->mapping); |
| |
| /* |
| * If page->mapping is NULL, then it cannot be a PageAnon |
| * page; but it might be the ZERO_PAGE or in the gate area or |
| * in a special mapping (all cases which we are happy to fail); |
| * or it may have been a good file page when get_user_pages_fast |
| * found it, but truncated or holepunched or subjected to |
| * invalidate_complete_page2 before we got the page lock (also |
| * cases which we are happy to fail). And we hold a reference, |
| * so refcount care in invalidate_inode_page's remove_mapping |
| * prevents drop_caches from setting mapping to NULL beneath us. |
| * |
| * The case we do have to guard against is when memory pressure made |
| * shmem_writepage move it from filecache to swapcache beneath us: |
| * an unlikely race, but we do need to retry for page->mapping. |
| */ |
| if (unlikely(!mapping)) { |
| int shmem_swizzled; |
| |
| /* |
| * Page lock is required to identify which special case above |
| * applies. If this is really a shmem page then the page lock |
| * will prevent unexpected transitions. |
| */ |
| lock_page(page); |
| shmem_swizzled = PageSwapCache(page) || page->mapping; |
| unlock_page(page); |
| put_page(page); |
| |
| if (shmem_swizzled) |
| goto again; |
| |
| return -EFAULT; |
| } |
| |
| /* |
| * Private mappings are handled in a simple way. |
| * |
| * If the futex key is stored on an anonymous page, then the associated |
| * object is the mm which is implicitly pinned by the calling process. |
| * |
| * NOTE: When userspace waits on a MAP_SHARED mapping, even if |
| * it's a read-only handle, it's expected that futexes attach to |
| * the object not the particular process. |
| */ |
| if (PageAnon(page)) { |
| /* |
| * A RO anonymous page will never change and thus doesn't make |
| * sense for futex operations. |
| */ |
| if (unlikely(should_fail_futex(true)) || ro) { |
| err = -EFAULT; |
| goto out; |
| } |
| |
| key->both.offset |= FUT_OFF_MMSHARED; /* ref taken on mm */ |
| key->private.mm = mm; |
| key->private.address = address; |
| |
| } else { |
| struct inode *inode; |
| |
| /* |
| * The associated futex object in this case is the inode and |
| * the page->mapping must be traversed. Ordinarily this should |
| * be stabilised under page lock but it's not strictly |
| * necessary in this case as we just want to pin the inode, not |
| * update the radix tree or anything like that. |
| * |
| * The RCU read lock is taken as the inode is finally freed |
| * under RCU. If the mapping still matches expectations then the |
| * mapping->host can be safely accessed as being a valid inode. |
| */ |
| rcu_read_lock(); |
| |
| if (READ_ONCE(page->mapping) != mapping) { |
| rcu_read_unlock(); |
| put_page(page); |
| |
| goto again; |
| } |
| |
| inode = READ_ONCE(mapping->host); |
| if (!inode) { |
| rcu_read_unlock(); |
| put_page(page); |
| |
| goto again; |
| } |
| |
| key->both.offset |= FUT_OFF_INODE; /* inode-based key */ |
| key->shared.i_seq = get_inode_sequence_number(inode); |
| key->shared.pgoff = page_to_pgoff(tail); |
| rcu_read_unlock(); |
| } |
| |
| out: |
| put_page(page); |
| return err; |
| } |
| |
| /** |
| * fault_in_user_writeable() - Fault in user address and verify RW access |
| * @uaddr: pointer to faulting user space address |
| * |
| * Slow path to fixup the fault we just took in the atomic write |
| * access to @uaddr. |
| * |
| * We have no generic implementation of a non-destructive write to the |
| * user address. We know that we faulted in the atomic pagefault |
| * disabled section so we can as well avoid the #PF overhead by |
| * calling get_user_pages() right away. |
| */ |
| int fault_in_user_writeable(u32 __user *uaddr) |
| { |
| struct mm_struct *mm = current->mm; |
| int ret; |
| |
| mmap_read_lock(mm); |
| ret = fixup_user_fault(mm, (unsigned long)uaddr, |
| FAULT_FLAG_WRITE, NULL); |
| mmap_read_unlock(mm); |
| |
| return ret < 0 ? ret : 0; |
| } |
| |
| /** |
| * futex_top_waiter() - Return the highest priority waiter on a futex |
| * @hb: the hash bucket the futex_q's reside in |
| * @key: the futex key (to distinguish it from other futex futex_q's) |
| * |
| * Must be called with the hb lock held. |
| */ |
| struct futex_q *futex_top_waiter(struct futex_hash_bucket *hb, union futex_key *key) |
| { |
| struct futex_q *this; |
| |
| plist_for_each_entry(this, &hb->chain, list) { |
| if (futex_match(&this->key, key)) |
| return this; |
| } |
| return NULL; |
| } |
| |
| int futex_cmpxchg_value_locked(u32 *curval, u32 __user *uaddr, u32 uval, u32 newval) |
| { |
| int ret; |
| |
| pagefault_disable(); |
| ret = futex_atomic_cmpxchg_inatomic(curval, uaddr, uval, newval); |
| pagefault_enable(); |
| |
| return ret; |
| } |
| |
| int futex_get_value_locked(u32 *dest, u32 __user *from) |
| { |
| int ret; |
| |
| pagefault_disable(); |
| ret = __get_user(*dest, from); |
| pagefault_enable(); |
| |
| return ret ? -EFAULT : 0; |
| } |
| |
| /** |
| * wait_for_owner_exiting - Block until the owner has exited |
| * @ret: owner's current futex lock status |
| * @exiting: Pointer to the exiting task |
| * |
| * Caller must hold a refcount on @exiting. |
| */ |
| void wait_for_owner_exiting(int ret, struct task_struct *exiting) |
| { |
| if (ret != -EBUSY) { |
| WARN_ON_ONCE(exiting); |
| return; |
| } |
| |
| if (WARN_ON_ONCE(ret == -EBUSY && !exiting)) |
| return; |
| |
| mutex_lock(&exiting->futex_exit_mutex); |
| /* |
| * No point in doing state checking here. If the waiter got here |
| * while the task was in exec()->exec_futex_release() then it can |
| * have any FUTEX_STATE_* value when the waiter has acquired the |
| * mutex. OK, if running, EXITING or DEAD if it reached exit() |
| * already. Highly unlikely and not a problem. Just one more round |
| * through the futex maze. |
| */ |
| mutex_unlock(&exiting->futex_exit_mutex); |
| |
| put_task_struct(exiting); |
| } |
| |
| /** |
| * __futex_unqueue() - Remove the futex_q from its futex_hash_bucket |
| * @q: The futex_q to unqueue |
| * |
| * The q->lock_ptr must not be NULL and must be held by the caller. |
| */ |
| void __futex_unqueue(struct futex_q *q) |
| { |
| struct futex_hash_bucket *hb; |
| |
| if (WARN_ON_SMP(!q->lock_ptr) || WARN_ON(plist_node_empty(&q->list))) |
| return; |
| lockdep_assert_held(q->lock_ptr); |
| |
| hb = container_of(q->lock_ptr, struct futex_hash_bucket, lock); |
| plist_del(&q->list, &hb->chain); |
| futex_hb_waiters_dec(hb); |
| } |
| |
| /* The key must be already stored in q->key. */ |
| struct futex_hash_bucket *futex_q_lock(struct futex_q *q) |
| __acquires(&hb->lock) |
| { |
| struct futex_hash_bucket *hb; |
| |
| hb = futex_hash(&q->key); |
| |
| /* |
| * Increment the counter before taking the lock so that |
| * a potential waker won't miss a to-be-slept task that is |
| * waiting for the spinlock. This is safe as all futex_q_lock() |
| * users end up calling futex_queue(). Similarly, for housekeeping, |
| * decrement the counter at futex_q_unlock() when some error has |
| * occurred and we don't end up adding the task to the list. |
| */ |
| futex_hb_waiters_inc(hb); /* implies smp_mb(); (A) */ |
| |
| q->lock_ptr = &hb->lock; |
| |
| spin_lock(&hb->lock); |
| return hb; |
| } |
| |
| void futex_q_unlock(struct futex_hash_bucket *hb) |
| __releases(&hb->lock) |
| { |
| spin_unlock(&hb->lock); |
| futex_hb_waiters_dec(hb); |
| } |
| |
| void __futex_queue(struct futex_q *q, struct futex_hash_bucket *hb) |
| { |
| int prio; |
| |
| /* |
| * The priority used to register this element is |
| * - either the real thread-priority for the real-time threads |
| * (i.e. threads with a priority lower than MAX_RT_PRIO) |
| * - or MAX_RT_PRIO for non-RT threads. |
| * Thus, all RT-threads are woken first in priority order, and |
| * the others are woken last, in FIFO order. |
| */ |
| prio = min(current->normal_prio, MAX_RT_PRIO); |
| |
| plist_node_init(&q->list, prio); |
| plist_add(&q->list, &hb->chain); |
| q->task = current; |
| } |
| |
| /** |
| * futex_unqueue() - Remove the futex_q from its futex_hash_bucket |
| * @q: The futex_q to unqueue |
| * |
| * The q->lock_ptr must not be held by the caller. A call to futex_unqueue() must |
| * be paired with exactly one earlier call to futex_queue(). |
| * |
| * Return: |
| * - 1 - if the futex_q was still queued (and we removed unqueued it); |
| * - 0 - if the futex_q was already removed by the waking thread |
| */ |
| int futex_unqueue(struct futex_q *q) |
| { |
| spinlock_t *lock_ptr; |
| int ret = 0; |
| |
| /* In the common case we don't take the spinlock, which is nice. */ |
| retry: |
| /* |
| * q->lock_ptr can change between this read and the following spin_lock. |
| * Use READ_ONCE to forbid the compiler from reloading q->lock_ptr and |
| * optimizing lock_ptr out of the logic below. |
| */ |
| lock_ptr = READ_ONCE(q->lock_ptr); |
| if (lock_ptr != NULL) { |
| spin_lock(lock_ptr); |
| /* |
| * q->lock_ptr can change between reading it and |
| * spin_lock(), causing us to take the wrong lock. This |
| * corrects the race condition. |
| * |
| * Reasoning goes like this: if we have the wrong lock, |
| * q->lock_ptr must have changed (maybe several times) |
| * between reading it and the spin_lock(). It can |
| * change again after the spin_lock() but only if it was |
| * already changed before the spin_lock(). It cannot, |
| * however, change back to the original value. Therefore |
| * we can detect whether we acquired the correct lock. |
| */ |
| if (unlikely(lock_ptr != q->lock_ptr)) { |
| spin_unlock(lock_ptr); |
| goto retry; |
| } |
| __futex_unqueue(q); |
| |
| BUG_ON(q->pi_state); |
| |
| spin_unlock(lock_ptr); |
| ret = 1; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * PI futexes can not be requeued and must remove themselves from the |
| * hash bucket. The hash bucket lock (i.e. lock_ptr) is held. |
| */ |
| void futex_unqueue_pi(struct futex_q *q) |
| { |
| __futex_unqueue(q); |
| |
| BUG_ON(!q->pi_state); |
| put_pi_state(q->pi_state); |
| q->pi_state = NULL; |
| } |
| |
| /* Constants for the pending_op argument of handle_futex_death */ |
| #define HANDLE_DEATH_PENDING true |
| #define HANDLE_DEATH_LIST false |
| |
| /* |
| * Process a futex-list entry, check whether it's owned by the |
| * dying task, and do notification if so: |
| */ |
| static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, |
| bool pi, bool pending_op) |
| { |
| u32 uval, nval, mval; |
| pid_t owner; |
| int err; |
| |
| /* Futex address must be 32bit aligned */ |
| if ((((unsigned long)uaddr) % sizeof(*uaddr)) != 0) |
| return -1; |
| |
| retry: |
| if (get_user(uval, uaddr)) |
| return -1; |
| |
| /* |
| * Special case for regular (non PI) futexes. The unlock path in |
| * user space has two race scenarios: |
| * |
| * 1. The unlock path releases the user space futex value and |
| * before it can execute the futex() syscall to wake up |
| * waiters it is killed. |
| * |
| * 2. A woken up waiter is killed before it can acquire the |
| * futex in user space. |
| * |
| * In the second case, the wake up notification could be generated |
| * by the unlock path in user space after setting the futex value |
| * to zero or by the kernel after setting the OWNER_DIED bit below. |
| * |
| * In both cases the TID validation below prevents a wakeup of |
| * potential waiters which can cause these waiters to block |
| * forever. |
| * |
| * In both cases the following conditions are met: |
| * |
| * 1) task->robust_list->list_op_pending != NULL |
| * @pending_op == true |
| * 2) The owner part of user space futex value == 0 |
| * 3) Regular futex: @pi == false |
| * |
| * If these conditions are met, it is safe to attempt waking up a |
| * potential waiter without touching the user space futex value and |
| * trying to set the OWNER_DIED bit. If the futex value is zero, |
| * the rest of the user space mutex state is consistent, so a woken |
| * waiter will just take over the uncontended futex. Setting the |
| * OWNER_DIED bit would create inconsistent state and malfunction |
| * of the user space owner died handling. Otherwise, the OWNER_DIED |
| * bit is already set, and the woken waiter is expected to deal with |
| * this. |
| */ |
| owner = uval & FUTEX_TID_MASK; |
| |
| if (pending_op && !pi && !owner) { |
| futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); |
| return 0; |
| } |
| |
| if (owner != task_pid_vnr(curr)) |
| return 0; |
| |
| /* |
| * Ok, this dying thread is truly holding a futex |
| * of interest. Set the OWNER_DIED bit atomically |
| * via cmpxchg, and if the value had FUTEX_WAITERS |
| * set, wake up a waiter (if any). (We have to do a |
| * futex_wake() even if OWNER_DIED is already set - |
| * to handle the rare but possible case of recursive |
| * thread-death.) The rest of the cleanup is done in |
| * userspace. |
| */ |
| mval = (uval & FUTEX_WAITERS) | FUTEX_OWNER_DIED; |
| |
| /* |
| * We are not holding a lock here, but we want to have |
| * the pagefault_disable/enable() protection because |
| * we want to handle the fault gracefully. If the |
| * access fails we try to fault in the futex with R/W |
| * verification via get_user_pages. get_user() above |
| * does not guarantee R/W access. If that fails we |
| * give up and leave the futex locked. |
| */ |
| if ((err = futex_cmpxchg_value_locked(&nval, uaddr, uval, mval))) { |
| switch (err) { |
| case -EFAULT: |
| if (fault_in_user_writeable(uaddr)) |
| return -1; |
| goto retry; |
| |
| case -EAGAIN: |
| cond_resched(); |
| goto retry; |
| |
| default: |
| WARN_ON_ONCE(1); |
| return err; |
| } |
| } |
| |
| if (nval != uval) |
| goto retry; |
| |
| /* |
| * Wake robust non-PI futexes here. The wakeup of |
| * PI futexes happens in exit_pi_state(): |
| */ |
| if (!pi && (uval & FUTEX_WAITERS)) |
| futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); |
| |
| return 0; |
| } |
| |
| /* |
| * Fetch a robust-list pointer. Bit 0 signals PI futexes: |
| */ |
| static inline int fetch_robust_entry(struct robust_list __user **entry, |
| struct robust_list __user * __user *head, |
| unsigned int *pi) |
| { |
| unsigned long uentry; |
| |
| if (get_user(uentry, (unsigned long __user *)head)) |
| return -EFAULT; |
| |
| *entry = (void __user *)(uentry & ~1UL); |
| *pi = uentry & 1; |
| |
| return 0; |
| } |
| |
| /* |
| * Walk curr->robust_list (very carefully, it's a userspace list!) |
| * and mark any locks found there dead, and notify any waiters. |
| * |
| * We silently return on any sign of list-walking problem. |
| */ |
| static void exit_robust_list(struct task_struct *curr) |
| { |
| struct robust_list_head __user *head = curr->robust_list; |
| struct robust_list __user *entry, *next_entry, *pending; |
| unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; |
| unsigned int next_pi; |
| unsigned long futex_offset; |
| int rc; |
| |
| /* |
| * Fetch the list head (which was registered earlier, via |
| * sys_set_robust_list()): |
| */ |
| if (fetch_robust_entry(&entry, &head->list.next, &pi)) |
| return; |
| /* |
| * Fetch the relative futex offset: |
| */ |
| if (get_user(futex_offset, &head->futex_offset)) |
| return; |
| /* |
| * Fetch any possibly pending lock-add first, and handle it |
| * if it exists: |
| */ |
| if (fetch_robust_entry(&pending, &head->list_op_pending, &pip)) |
| return; |
| |
| next_entry = NULL; /* avoid warning with gcc */ |
| while (entry != &head->list) { |
| /* |
| * Fetch the next entry in the list before calling |
| * handle_futex_death: |
| */ |
| rc = fetch_robust_entry(&next_entry, &entry->next, &next_pi); |
| /* |
| * A pending lock might already be on the list, so |
| * don't process it twice: |
| */ |
| if (entry != pending) { |
| if (handle_futex_death((void __user *)entry + futex_offset, |
| curr, pi, HANDLE_DEATH_LIST)) |
| return; |
| } |
| if (rc) |
| return; |
| entry = next_entry; |
| pi = next_pi; |
| /* |
| * Avoid excessively long or circular lists: |
| */ |
| if (!--limit) |
| break; |
| |
| cond_resched(); |
| } |
| |
| if (pending) { |
| handle_futex_death((void __user *)pending + futex_offset, |
| curr, pip, HANDLE_DEATH_PENDING); |
| } |
| } |
| |
| #ifdef CONFIG_COMPAT |
| static void __user *futex_uaddr(struct robust_list __user *entry, |
| compat_long_t futex_offset) |
| { |
| compat_uptr_t base = ptr_to_compat(entry); |
| void __user *uaddr = compat_ptr(base + futex_offset); |
| |
| return uaddr; |
| } |
| |
| /* |
| * Fetch a robust-list pointer. Bit 0 signals PI futexes: |
| */ |
| static inline int |
| compat_fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry, |
| compat_uptr_t __user *head, unsigned int *pi) |
| { |
| if (get_user(*uentry, head)) |
| return -EFAULT; |
| |
| *entry = compat_ptr((*uentry) & ~1); |
| *pi = (unsigned int)(*uentry) & 1; |
| |
| return 0; |
| } |
| |
| /* |
| * Walk curr->robust_list (very carefully, it's a userspace list!) |
| * and mark any locks found there dead, and notify any waiters. |
| * |
| * We silently return on any sign of list-walking problem. |
| */ |
| static void compat_exit_robust_list(struct task_struct *curr) |
| { |
| struct compat_robust_list_head __user *head = curr->compat_robust_list; |
| struct robust_list __user *entry, *next_entry, *pending; |
| unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; |
| unsigned int next_pi; |
| compat_uptr_t uentry, next_uentry, upending; |
| compat_long_t futex_offset; |
| int rc; |
| |
| /* |
| * Fetch the list head (which was registered earlier, via |
| * sys_set_robust_list()): |
| */ |
| if (compat_fetch_robust_entry(&uentry, &entry, &head->list.next, &pi)) |
| return; |
| /* |
| * Fetch the relative futex offset: |
| */ |
| if (get_user(futex_offset, &head->futex_offset)) |
| return; |
| /* |
| * Fetch any possibly pending lock-add first, and handle it |
| * if it exists: |
| */ |
| if (compat_fetch_robust_entry(&upending, &pending, |
| &head->list_op_pending, &pip)) |
| return; |
| |
| next_entry = NULL; /* avoid warning with gcc */ |
| while (entry != (struct robust_list __user *) &head->list) { |
| /* |
| * Fetch the next entry in the list before calling |
| * handle_futex_death: |
| */ |
| rc = compat_fetch_robust_entry(&next_uentry, &next_entry, |
| (compat_uptr_t __user *)&entry->next, &next_pi); |
| /* |
| * A pending lock might already be on the list, so |
| * dont process it twice: |
| */ |
| if (entry != pending) { |
| void __user *uaddr = futex_uaddr(entry, futex_offset); |
| |
| if (handle_futex_death(uaddr, curr, pi, |
| HANDLE_DEATH_LIST)) |
| return; |
| } |
| if (rc) |
| return; |
| uentry = next_uentry; |
| entry = next_entry; |
| pi = next_pi; |
| /* |
| * Avoid excessively long or circular lists: |
| */ |
| if (!--limit) |
| break; |
| |
| cond_resched(); |
| } |
| if (pending) { |
| void __user *uaddr = futex_uaddr(pending, futex_offset); |
| |
| handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_FUTEX_PI |
| |
| /* |
| * This task is holding PI mutexes at exit time => bad. |
| * Kernel cleans up PI-state, but userspace is likely hosed. |
| * (Robust-futex cleanup is separate and might save the day for userspace.) |
| */ |
| static void exit_pi_state_list(struct task_struct *curr) |
| { |
| struct list_head *next, *head = &curr->pi_state_list; |
| struct futex_pi_state *pi_state; |
| struct futex_hash_bucket *hb; |
| union futex_key key = FUTEX_KEY_INIT; |
| |
| /* |
| * We are a ZOMBIE and nobody can enqueue itself on |
| * pi_state_list anymore, but we have to be careful |
| * versus waiters unqueueing themselves: |
| */ |
| raw_spin_lock_irq(&curr->pi_lock); |
| while (!list_empty(head)) { |
| next = head->next; |
| pi_state = list_entry(next, struct futex_pi_state, list); |
| key = pi_state->key; |
| hb = futex_hash(&key); |
| |
| /* |
| * We can race against put_pi_state() removing itself from the |
| * list (a waiter going away). put_pi_state() will first |
| * decrement the reference count and then modify the list, so |
| * its possible to see the list entry but fail this reference |
| * acquire. |
| * |
| * In that case; drop the locks to let put_pi_state() make |
| * progress and retry the loop. |
| */ |
| if (!refcount_inc_not_zero(&pi_state->refcount)) { |
| raw_spin_unlock_irq(&curr->pi_lock); |
| cpu_relax(); |
| raw_spin_lock_irq(&curr->pi_lock); |
| continue; |
| } |
| raw_spin_unlock_irq(&curr->pi_lock); |
| |
| spin_lock(&hb->lock); |
| raw_spin_lock_irq(&pi_state->pi_mutex.wait_lock); |
| raw_spin_lock(&curr->pi_lock); |
| /* |
| * We dropped the pi-lock, so re-check whether this |
| * task still owns the PI-state: |
| */ |
| if (head->next != next) { |
| /* retain curr->pi_lock for the loop invariant */ |
| raw_spin_unlock(&pi_state->pi_mutex.wait_lock); |
| spin_unlock(&hb->lock); |
| put_pi_state(pi_state); |
| continue; |
| } |
| |
| WARN_ON(pi_state->owner != curr); |
| WARN_ON(list_empty(&pi_state->list)); |
| list_del_init(&pi_state->list); |
| pi_state->owner = NULL; |
| |
| raw_spin_unlock(&curr->pi_lock); |
| raw_spin_unlock_irq(&pi_state->pi_mutex.wait_lock); |
| spin_unlock(&hb->lock); |
| |
| rt_mutex_futex_unlock(&pi_state->pi_mutex); |
| put_pi_state(pi_state); |
| |
| raw_spin_lock_irq(&curr->pi_lock); |
| } |
| raw_spin_unlock_irq(&curr->pi_lock); |
| } |
| #else |
| static inline void exit_pi_state_list(struct task_struct *curr) { } |
| #endif |
| |
| static void futex_cleanup(struct task_struct *tsk) |
| { |
| if (unlikely(tsk->robust_list)) { |
| exit_robust_list(tsk); |
| tsk->robust_list = NULL; |
| } |
| |
| #ifdef CONFIG_COMPAT |
| if (unlikely(tsk->compat_robust_list)) { |
| compat_exit_robust_list(tsk); |
| tsk->compat_robust_list = NULL; |
| } |
| #endif |
| |
| if (unlikely(!list_empty(&tsk->pi_state_list))) |
| exit_pi_state_list(tsk); |
| } |
| |
| /** |
| * futex_exit_recursive - Set the tasks futex state to FUTEX_STATE_DEAD |
| * @tsk: task to set the state on |
| * |
| * Set the futex exit state of the task lockless. The futex waiter code |
| * observes that state when a task is exiting and loops until the task has |
| * actually finished the futex cleanup. The worst case for this is that the |
| * waiter runs through the wait loop until the state becomes visible. |
| * |
| * This is called from the recursive fault handling path in make_task_dead(). |
| * |
| * This is best effort. Either the futex exit code has run already or |
| * not. If the OWNER_DIED bit has been set on the futex then the waiter can |
| * take it over. If not, the problem is pushed back to user space. If the |
| * futex exit code did not run yet, then an already queued waiter might |
| * block forever, but there is nothing which can be done about that. |
| */ |
| void futex_exit_recursive(struct task_struct *tsk) |
| { |
| /* If the state is FUTEX_STATE_EXITING then futex_exit_mutex is held */ |
| if (tsk->futex_state == FUTEX_STATE_EXITING) |
| mutex_unlock(&tsk->futex_exit_mutex); |
| tsk->futex_state = FUTEX_STATE_DEAD; |
| } |
| |
| static void futex_cleanup_begin(struct task_struct *tsk) |
| { |
| /* |
| * Prevent various race issues against a concurrent incoming waiter |
| * including live locks by forcing the waiter to block on |
| * tsk->futex_exit_mutex when it observes FUTEX_STATE_EXITING in |
| * attach_to_pi_owner(). |
| */ |
| mutex_lock(&tsk->futex_exit_mutex); |
| |
| /* |
| * Switch the state to FUTEX_STATE_EXITING under tsk->pi_lock. |
| * |
| * This ensures that all subsequent checks of tsk->futex_state in |
| * attach_to_pi_owner() must observe FUTEX_STATE_EXITING with |
| * tsk->pi_lock held. |
| * |
| * It guarantees also that a pi_state which was queued right before |
| * the state change under tsk->pi_lock by a concurrent waiter must |
| * be observed in exit_pi_state_list(). |
| */ |
| raw_spin_lock_irq(&tsk->pi_lock); |
| tsk->futex_state = FUTEX_STATE_EXITING; |
| raw_spin_unlock_irq(&tsk->pi_lock); |
| } |
| |
| static void futex_cleanup_end(struct task_struct *tsk, int state) |
| { |
| /* |
| * Lockless store. The only side effect is that an observer might |
| * take another loop until it becomes visible. |
| */ |
| tsk->futex_state = state; |
| /* |
| * Drop the exit protection. This unblocks waiters which observed |
| * FUTEX_STATE_EXITING to reevaluate the state. |
| */ |
| mutex_unlock(&tsk->futex_exit_mutex); |
| } |
| |
| void futex_exec_release(struct task_struct *tsk) |
| { |
| /* |
| * The state handling is done for consistency, but in the case of |
| * exec() there is no way to prevent further damage as the PID stays |
| * the same. But for the unlikely and arguably buggy case that a |
| * futex is held on exec(), this provides at least as much state |
| * consistency protection which is possible. |
| */ |
| futex_cleanup_begin(tsk); |
| futex_cleanup(tsk); |
| /* |
| * Reset the state to FUTEX_STATE_OK. The task is alive and about |
| * exec a new binary. |
| */ |
| futex_cleanup_end(tsk, FUTEX_STATE_OK); |
| } |
| |
| void futex_exit_release(struct task_struct *tsk) |
| { |
| futex_cleanup_begin(tsk); |
| futex_cleanup(tsk); |
| futex_cleanup_end(tsk, FUTEX_STATE_DEAD); |
| } |
| |
| static int __init futex_init(void) |
| { |
| unsigned int futex_shift; |
| unsigned long i; |
| |
| #if CONFIG_BASE_SMALL |
| futex_hashsize = 16; |
| #else |
| futex_hashsize = roundup_pow_of_two(256 * num_possible_cpus()); |
| #endif |
| |
| futex_queues = alloc_large_system_hash("futex", sizeof(*futex_queues), |
| futex_hashsize, 0, |
| futex_hashsize < 256 ? HASH_SMALL : 0, |
| &futex_shift, NULL, |
| futex_hashsize, futex_hashsize); |
| futex_hashsize = 1UL << futex_shift; |
| |
| for (i = 0; i < futex_hashsize; i++) { |
| atomic_set(&futex_queues[i].waiters, 0); |
| plist_head_init(&futex_queues[i].chain); |
| spin_lock_init(&futex_queues[i].lock); |
| } |
| |
| return 0; |
| } |
| core_initcall(futex_init); |